COUTFILL EARTH ENHANCEMENT MATERIAL is made from special stone and earth, its perfacement is very stable ,the life is long.
COUTFILL EARTH ENHANCEMENT MATERIAL is made from special stone and earth,its perfacement is very stable ,the life is long. it is light black ,white,yellow,red wine powder,non-toxic, no smell, no pollution ,the material can bear high temperature, cold-resistant, high voltage shock,it's Physical reduction agent . you can Consult our technician for how to use it.
you can also call us by +86-21-50932955 to ask more information about the material or other products. welcome to call us.
Saturday, September 17, 2011
Easy Soluble In Water PAM
PAM
Polyacrylamide
1.For water treatment,mining and paper mills
2.Anionic Polymer
3.High molecular weight
PAM
Polyacrylamide
Physical property:
The physical property of PAM is mainly depended on the behavior in the aqueous solution.
The outstanding feature is high hydrophilic—can soluble in water by all kinds of proportion.
Its water solution can bear electrolyte well, such as not sensitive to sodium sulfate and
ammonia chloride, and is compatible to surfactant.
Chemical reaction:
Side group of molecular-chain of PAM is activated amide group that can generate many
derivatives through chemical reaction, but it can’t proceed completely because of the
adjacent gene reaction.
Cationic Polyacrylamide flocculant application:
1.As a flocculating agent, mainly used in industrial solid-liquid separation rocess, including settlement, to clarify, concentrate and sludge dewatering processes, applications for all the major sectors are: urban sewage treatment, food processing, petrochmical, metallurgical, processing, dyeing and the sugar and all kinds of industrial wastewater treatment.
2.In the paper industry can be as dry strengh agents, retention agents, filter aids, can be greatly improved as paper quality, enhance the physical strength of paper and reduce the loss of fiber or filler to accelerate the treatment, since enhanced retention to help filter effect can also be used in the treatment of white water at the same time, in the drinking process can play a significant flocculation.
3.Fiber cement(asbestos-cement products) will enable the forming of asbestos-cement products improved drainage; Insulation board in, and fiber additives can increase the binding capacity.
4.In the mining, coal mining industry can be used for waste water, coal washing waste water clarifier.
5.Can be used for dyeing wastewater, leather wastewater, oily wastewater treatment, so that turbidity removal, decolorization, to achieve the emission standards.
6. For the tap water in the river water treatment plant flocculant.
Polyacrylamide anion type PAM quality indexes:
Item
C1610
C1620
C1635
C1650
Ion Density
low
Middle
Middle
High
Molecular Weight (ten thousand)
1000-1200
1000-1200
800-1000
800-1000
Solid Content ≥%
90
90
90
90
Free Monomer≤%
0.05
0.05
0.05
0.05
Dissolved Time ≤min
40
40
40
40
Polyacrylamide cation type PAM quality indexes:
Test Item/Molecular Weight
800-1000
1000-1200
1300-1500
1600-2000
Ion Density
25-45
45-55
55-60
65-75
Solid Content %
88±2%
88±2%
88±2%
88±2%
Hydrolysis Degree %
20-30
20-30
20-30
20-30
Remain Monomer
≤0.05
≤0.05
≤0.05
≤0.05
Dissolved Time
≤2h
≤2h
≤2h
≤2h
Polyacrylamide
1.For water treatment,mining and paper mills
2.Anionic Polymer
3.High molecular weight
PAM
Polyacrylamide
Physical property:
The physical property of PAM is mainly depended on the behavior in the aqueous solution.
The outstanding feature is high hydrophilic—can soluble in water by all kinds of proportion.
Its water solution can bear electrolyte well, such as not sensitive to sodium sulfate and
ammonia chloride, and is compatible to surfactant.
Chemical reaction:
Side group of molecular-chain of PAM is activated amide group that can generate many
derivatives through chemical reaction, but it can’t proceed completely because of the
adjacent gene reaction.
Cationic Polyacrylamide flocculant application:
1.As a flocculating agent, mainly used in industrial solid-liquid separation rocess, including settlement, to clarify, concentrate and sludge dewatering processes, applications for all the major sectors are: urban sewage treatment, food processing, petrochmical, metallurgical, processing, dyeing and the sugar and all kinds of industrial wastewater treatment.
2.In the paper industry can be as dry strengh agents, retention agents, filter aids, can be greatly improved as paper quality, enhance the physical strength of paper and reduce the loss of fiber or filler to accelerate the treatment, since enhanced retention to help filter effect can also be used in the treatment of white water at the same time, in the drinking process can play a significant flocculation.
3.Fiber cement(asbestos-cement products) will enable the forming of asbestos-cement products improved drainage; Insulation board in, and fiber additives can increase the binding capacity.
4.In the mining, coal mining industry can be used for waste water, coal washing waste water clarifier.
5.Can be used for dyeing wastewater, leather wastewater, oily wastewater treatment, so that turbidity removal, decolorization, to achieve the emission standards.
6. For the tap water in the river water treatment plant flocculant.
Polyacrylamide anion type PAM quality indexes:
Item
C1610
C1620
C1635
C1650
Ion Density
low
Middle
Middle
High
Molecular Weight (ten thousand)
1000-1200
1000-1200
800-1000
800-1000
Solid Content ≥%
90
90
90
90
Free Monomer≤%
0.05
0.05
0.05
0.05
Dissolved Time ≤min
40
40
40
40
Polyacrylamide cation type PAM quality indexes:
Test Item/Molecular Weight
800-1000
1000-1200
1300-1500
1600-2000
Ion Density
25-45
45-55
55-60
65-75
Solid Content %
88±2%
88±2%
88±2%
88±2%
Hydrolysis Degree %
20-30
20-30
20-30
20-30
Remain Monomer
≤0.05
≤0.05
≤0.05
≤0.05
Dissolved Time
≤2h
≤2h
≤2h
≤2h
Easy Soluble In Water Polyacrylamide PAM
Polyacrylamide PAM
1) Timely shipment
2) Effective flocculation
3) Easily soluble in water
4) ISO 9001: 2000
Polyacrylamide PAM
Physical property
The physical property of PAM is mainly depended on the behavior in the aqueous solution.
The outstanding feature is high hydrophilic—can soluble in water by all kinds of proportion.
Its water solution can bear electrolyte well, such as not sensitive to sodium sulfate and
ammonia chloride, and is compatible to surfactant.
Chemical reaction
Side group of molecular-chain of PAM is activated amide group that can generate many
derivatives through chemical reaction, but it can’t proceed completely because of the
adjacent gene reaction.
Anionic polyacrylamide specifications:
Item
C1610
C1620
C1635
C1650
Ion content
Low
Middle
Middle
High
Molecular weight(per 10 thousand)
1000-1200
1000-1200
800-1000
800-1000
Solid content
Min 90%
Min 90%
Min 90%
Min 90%
Free monomer
Max 0.05%
Max 0.05%
Max 0.05%
Max0.05%
Dissolution time
Max 40
Max 40
Max 40
Max 40
1) Timely shipment
2) Effective flocculation
3) Easily soluble in water
4) ISO 9001: 2000
Polyacrylamide PAM
Physical property
The physical property of PAM is mainly depended on the behavior in the aqueous solution.
The outstanding feature is high hydrophilic—can soluble in water by all kinds of proportion.
Its water solution can bear electrolyte well, such as not sensitive to sodium sulfate and
ammonia chloride, and is compatible to surfactant.
Chemical reaction
Side group of molecular-chain of PAM is activated amide group that can generate many
derivatives through chemical reaction, but it can’t proceed completely because of the
adjacent gene reaction.
Anionic polyacrylamide specifications:
Item
C1610
C1620
C1635
C1650
Ion content
Low
Middle
Middle
High
Molecular weight(per 10 thousand)
1000-1200
1000-1200
800-1000
800-1000
Solid content
Min 90%
Min 90%
Min 90%
Min 90%
Free monomer
Max 0.05%
Max 0.05%
Max 0.05%
Max0.05%
Dissolution time
Max 40
Max 40
Max 40
Max 40
Eco-friendly antiscalant for water purification system AE
Water treatment chemicals for reverse osmosis system
Alkyl epoxy carboxylate
Organic bisphosphonates scale inhibitor
With no biophosphonates technoloty to control desposition and scale
To stabilize halogen
Achieve maximum sedimentary control
Alkialine treatment solutions, to reduce or cancel acid dose
Thick water discharged eco-friendly cand reliable
Products explanation and useage
AE series is a Contain alkyl epoxy carboxylate alkaline solutions. Alkyl epoxy carboxylate is a non organic phosphonate CaCO3 inhibitor, it is the main component of AE series technique, and for special scale inhibitor use. AE technology in control calcium carbonate scaling is a major breakthrough. This product in the pH value of 9.0- 7.8 - open cooling water circulation system, still need to add certain inhibitor to control corrosion. Alkaline AE solutions apply wide, in langly er index (LSI) 2.8, scaling can very well control or deposite.
Organic bisphosphonates scale inhibitor in chlorine existence situation, easy to break down, or conversion, leading to carbonate controlling aspects is invalid. AE products in different concentrations of chlorine exists,can still inhibit sedimentary of calcium carbonate effectively. AE molecule can stabilize halogen.
Dosage and Usage explanation
AE series product correctly handling depends on many factors, such as potential fouling conditions, especially in a given installation conditions, according to the water hardness, alkalinity, PH value, concentration ratio circumstance, choose chemicals and the adding dosage according to different heat exchanger, sometimes need to add material corrosion, high calcium, high basicity can sometimes add less or not add corrosion inhibitors. Adding AE products in the cooling system should choose the place where large cooling water can be mixed quickly.
Dosage calculation according to dischage quantity,add 80-120PPM . In order to get the best effect, AE products should adopt net dosing way (not dilute). If must be diluted pls dilute with low hardness water
Pakeage:25KG/Plastic drum
Storage:AE products should storge under the middle temperature,avoiding freezing. If they were frozen,completely thawing and fully mixing before use.
Alkyl epoxy carboxylate
Organic bisphosphonates scale inhibitor
With no biophosphonates technoloty to control desposition and scale
To stabilize halogen
Achieve maximum sedimentary control
Alkialine treatment solutions, to reduce or cancel acid dose
Thick water discharged eco-friendly cand reliable
Products explanation and useage
AE series is a Contain alkyl epoxy carboxylate alkaline solutions. Alkyl epoxy carboxylate is a non organic phosphonate CaCO3 inhibitor, it is the main component of AE series technique, and for special scale inhibitor use. AE technology in control calcium carbonate scaling is a major breakthrough. This product in the pH value of 9.0- 7.8 - open cooling water circulation system, still need to add certain inhibitor to control corrosion. Alkaline AE solutions apply wide, in langly er index (LSI) 2.8, scaling can very well control or deposite.
Organic bisphosphonates scale inhibitor in chlorine existence situation, easy to break down, or conversion, leading to carbonate controlling aspects is invalid. AE products in different concentrations of chlorine exists,can still inhibit sedimentary of calcium carbonate effectively. AE molecule can stabilize halogen.
Dosage and Usage explanation
AE series product correctly handling depends on many factors, such as potential fouling conditions, especially in a given installation conditions, according to the water hardness, alkalinity, PH value, concentration ratio circumstance, choose chemicals and the adding dosage according to different heat exchanger, sometimes need to add material corrosion, high calcium, high basicity can sometimes add less or not add corrosion inhibitors. Adding AE products in the cooling system should choose the place where large cooling water can be mixed quickly.
Dosage calculation according to dischage quantity,add 80-120PPM . In order to get the best effect, AE products should adopt net dosing way (not dilute). If must be diluted pls dilute with low hardness water
Pakeage:25KG/Plastic drum
Storage:AE products should storge under the middle temperature,avoiding freezing. If they were frozen,completely thawing and fully mixing before use.
3-Methyl Pyridine
3-Methyl Pyridine
1 is one of the three isomers of methylpyridine
2 packed in 200 kg drum
3-Methyl Pyridine
This colorless liquid is a precursor to pyridine derivatives that have applications in the pharmaceutical and agricultural industries. Like pyridine, 3-methylpyridine is a colourless liquid with a strong odor. It is classified as a weak base.
FAX:86-315-3238699
1 is one of the three isomers of methylpyridine
2 packed in 200 kg drum
3-Methyl Pyridine
This colorless liquid is a precursor to pyridine derivatives that have applications in the pharmaceutical and agricultural industries. Like pyridine, 3-methylpyridine is a colourless liquid with a strong odor. It is classified as a weak base.
FAX:86-315-3238699
Eco-friendly green salable ATBC ACETYL TRIBUTYL CITRATE
safe, non-toxic, odourless ecofriendly plasticizer.resisitant to cold, heat, light and water. approved by US F.D.A. for food
this product is resistant to extraction, high flash point, no bad odor and does no harm touching with bare hands. has good combination with the resin. resin plasticized by it could show good transparency and low temperature flex. it 's very stable to heat, with low volatility
This product is developed with the help of a national expert, and after infrared spectroscopy, it has the same structure with international standard. properties also reach the international advanced standard.
this product is resistant to extraction, high flash point, no bad odor and does no harm touching with bare hands. has good combination with the resin. resin plasticized by it could show good transparency and low temperature flex. it 's very stable to heat, with low volatility
This product is developed with the help of a national expert, and after infrared spectroscopy, it has the same structure with international standard. properties also reach the international advanced standard.
Economical Coal-based Activated Carbon Sphere Shape
Activated Carbon
1.good adsorptive ability
2.favorable price
3.qualified product
Activated Carbon
It can be used as adsorbent, and it is widely used in the purification of gas,
such as exhaust gas, poisonous gas, industrial waste gas, etc.
It is also used in water treatment, such as, drinking water treatment,
industrial water purification, drinks purification, etc.
The products are black cylindrical particles with proper pore structure,
good adsorptive ability, great mechanical intensity, renewable easily and low cost, etc.
Our advantages:
1. ISO 9001:2000, Food grade authentication
2. Supply seaworthy double package
3. Timely shipment
4. You will know every step of the progress.
5. Pictures of the goods before the shipment.
6. Manufacturer in this line for 18 years
7. Export experience
8. Sample available
1.good adsorptive ability
2.favorable price
3.qualified product
Activated Carbon
It can be used as adsorbent, and it is widely used in the purification of gas,
such as exhaust gas, poisonous gas, industrial waste gas, etc.
It is also used in water treatment, such as, drinking water treatment,
industrial water purification, drinks purification, etc.
The products are black cylindrical particles with proper pore structure,
good adsorptive ability, great mechanical intensity, renewable easily and low cost, etc.
Our advantages:
1. ISO 9001:2000, Food grade authentication
2. Supply seaworthy double package
3. Timely shipment
4. You will know every step of the progress.
5. Pictures of the goods before the shipment.
6. Manufacturer in this line for 18 years
7. Export experience
8. Sample available
Effective 4A Zeolite Filter Media
Zeolite Filter
1.ISO9001
2.high exchange capacity
3.strong adsorption
4.lower cost&better service
Zeolite filter
1. Natural clinoptilolite filter Natural zeolite
is aluminosilicate, the appearance is white or bolarious.
It belongs to weakly acidic cationic exchange agent. After add the activated component, make it has better ion exchange or adsorption ability, and the adsorption energy also increase accordingly.
This kind of filter is mainly used for small boiler water conditioning, removing the calcium,magnesium ions in the water, in order to reduce the boiler scale formation and less the corrosion, at the same prolong the service life of the boiler.
In the waste water treatment, it can wipe off phosphorus, lead and hexavalent chromium. Invalided zeolite can be also used concentrated brine counter-current.
Natural clinoptilolite filter's chemical and physical index:
Proportion(g/cm3)
2.2-2.6
Silt Content%
≤1.0
Volumeweight(g/cm3)
1.6
Moisture%
≤1.5
Ware Rate%
<1.0
Sodium ion Exchange Ability
≥800
2. Activation zeolite filter Activation zeolite filter
is made by the natural zeolite after special activation.
The adsorption ability and the ion exchange capacity is better than the natural zeolite.
It is not only dislodge turbidity, chroma and peculiar smell, but also can adsorb harmful metals in the water(chrome, cadmium, nickel, zinc, mercury, iron ions) and organic in the water(phenol, phosphate radical ion). This product is conductive to dislodge various micro pollutants and has no harmful substances.
Therefore, activation zeolite filter is the ideal material for industrial water, waste water treatment and tap water filtration.
Performance Analysis:
Density g/cm3
1.8-2.2
Filtering Velocity m/h
4-12
Volumeweight g/cm3
1.4
Wear Rate%
<0.5
Pore Ratio%
≥50
Broken Rate%
<1.0
Specific Surface Area m2/g
500-800
Silt Content%
<1.0
Hydrochloric Acid Solute Rate%
≤0.1
All Exchange Work Capacity mg/g
2.2-2.5
1.ISO9001
2.high exchange capacity
3.strong adsorption
4.lower cost&better service
Zeolite filter
1. Natural clinoptilolite filter Natural zeolite
is aluminosilicate, the appearance is white or bolarious.
It belongs to weakly acidic cationic exchange agent. After add the activated component, make it has better ion exchange or adsorption ability, and the adsorption energy also increase accordingly.
This kind of filter is mainly used for small boiler water conditioning, removing the calcium,magnesium ions in the water, in order to reduce the boiler scale formation and less the corrosion, at the same prolong the service life of the boiler.
In the waste water treatment, it can wipe off phosphorus, lead and hexavalent chromium. Invalided zeolite can be also used concentrated brine counter-current.
Natural clinoptilolite filter's chemical and physical index:
Proportion(g/cm3)
2.2-2.6
Silt Content%
≤1.0
Volumeweight(g/cm3)
1.6
Moisture%
≤1.5
Ware Rate%
<1.0
Sodium ion Exchange Ability
≥800
2. Activation zeolite filter Activation zeolite filter
is made by the natural zeolite after special activation.
The adsorption ability and the ion exchange capacity is better than the natural zeolite.
It is not only dislodge turbidity, chroma and peculiar smell, but also can adsorb harmful metals in the water(chrome, cadmium, nickel, zinc, mercury, iron ions) and organic in the water(phenol, phosphate radical ion). This product is conductive to dislodge various micro pollutants and has no harmful substances.
Therefore, activation zeolite filter is the ideal material for industrial water, waste water treatment and tap water filtration.
Performance Analysis:
Density g/cm3
1.8-2.2
Filtering Velocity m/h
4-12
Volumeweight g/cm3
1.4
Wear Rate%
<0.5
Pore Ratio%
≥50
Broken Rate%
<1.0
Specific Surface Area m2/g
500-800
Silt Content%
<1.0
Hydrochloric Acid Solute Rate%
≤0.1
All Exchange Work Capacity mg/g
2.2-2.5
Effective Flocculation PAM For Water Treatment
PAM
a)Good for water treatment
b)Very useful in paper making
c) Industrial treatment and recycling.
PAM
Application
1. Industrial wastewater treatment. The effect is significant especially for wastewater with neutral or alkaline pH value, large suspended particles, high concentration and positive charge, such as wastewater of steel plants, electroplating plants, metallurgical plants and the coal washing plant.
2. Drinking water treatment. Use this product to deal with raw water, which has advantages of small dose, low-cost, no secondary pollution, etc.
3. Papermaking additive. It can used as dispersant of long fiber paper, dry strengthen agent, retention and drainage agent and flocculant for papermaking wastewater,etc
Instruction for use
1. It's very important to make the efficient dispersion during using, otherwise will cause agglomerate and "fish eyes", dissolving time will be longer.
2. Lowhardness water for use; avoid adopting such tank or pool, which will influence on water quality.
3. Improve the water temperature to accelerate the dissolving velocity, but not exceed 50°C.
4.Stirring will accelerate dissolving, but tough stirring will make the dispersant chain broken and degradation. Shipshape agitator with 200 - 500 rpm is the best choice.
5. Commonly mix the product into 0.05%-0.5%(w/w)solution as reserve.
6.Adjust the optimum dosage of product according to application condition.
Polyacrylamide cation type PAM quality indexes:
Test Item/Molecular Weight
800-1000
1000-1200
1300-1500
1600-2000
Ion Density
25-45
45-55
55-60
65-75
Solid Content %
88±2%
88±2%
88±2%
88±2%
Hydrolysis Degree %
20-30
20-30
20-30
20-30
Remain Monomer
≤0.05
≤0.05
≤0.05
≤0.05
Dissolved Time
≤2h
≤2h
≤2h
≤2h
Polyacrylamide anion type PAM quality indexes:
Item
C1610
C1620
C1635
C1650
Ion Density
low
Middle
Middle
High
Molecular Weight (ten thousand)
1000-1200
1000-1200
800-1000
800-1000
Solid Content ≥%
90
90
90
90
Free Monomer≤%
0.05
0.05
0.05
0.05
Dissolved Time ≤min
40
40
40
40
a)Good for water treatment
b)Very useful in paper making
c) Industrial treatment and recycling.
PAM
Application
1. Industrial wastewater treatment. The effect is significant especially for wastewater with neutral or alkaline pH value, large suspended particles, high concentration and positive charge, such as wastewater of steel plants, electroplating plants, metallurgical plants and the coal washing plant.
2. Drinking water treatment. Use this product to deal with raw water, which has advantages of small dose, low-cost, no secondary pollution, etc.
3. Papermaking additive. It can used as dispersant of long fiber paper, dry strengthen agent, retention and drainage agent and flocculant for papermaking wastewater,etc
Instruction for use
1. It's very important to make the efficient dispersion during using, otherwise will cause agglomerate and "fish eyes", dissolving time will be longer.
2. Lowhardness water for use; avoid adopting such tank or pool, which will influence on water quality.
3. Improve the water temperature to accelerate the dissolving velocity, but not exceed 50°C.
4.Stirring will accelerate dissolving, but tough stirring will make the dispersant chain broken and degradation. Shipshape agitator with 200 - 500 rpm is the best choice.
5. Commonly mix the product into 0.05%-0.5%(w/w)solution as reserve.
6.Adjust the optimum dosage of product according to application condition.
Polyacrylamide cation type PAM quality indexes:
Test Item/Molecular Weight
800-1000
1000-1200
1300-1500
1600-2000
Ion Density
25-45
45-55
55-60
65-75
Solid Content %
88±2%
88±2%
88±2%
88±2%
Hydrolysis Degree %
20-30
20-30
20-30
20-30
Remain Monomer
≤0.05
≤0.05
≤0.05
≤0.05
Dissolved Time
≤2h
≤2h
≤2h
≤2h
Polyacrylamide anion type PAM quality indexes:
Item
C1610
C1620
C1635
C1650
Ion Density
low
Middle
Middle
High
Molecular Weight (ten thousand)
1000-1200
1000-1200
800-1000
800-1000
Solid Content ≥%
90
90
90
90
Free Monomer≤%
0.05
0.05
0.05
0.05
Dissolved Time ≤min
40
40
40
40
Effective PAM for Water Treatment
PAM for Water Treatment
a.)Good for water treatment
b)Very useful in paper making
c) Industrial treatment and recycling.
PAM for Water Treatment
Non-ionic polyacrylamide is formed by the homopolymerization of acrylamide. It has high purity ,good fuction,wide uses, and its main usages are as follows:
1) It is the raw mateials used for the changed pam, for example, anionic pam .we can get them from the hydrolysis by choosing different types of nonionic pam.
2) Textile industry auxiliary .It can be made into slurry chemicals by adding other additives. For textile sizing, can improve the adhesion, penetration and performance of pulp removal, the fabric has anti-static, reduce sizing rate, plasma cutter to reduce plaque, cloth breakage rate and litter.
3) Agent for the wastewater treatment.
4) Agent for the desert treatment
5) Good way for soil improvement in the dry area.
6) Agent for oil field plugging
7) Can be use in architecture, and paint for interior wall.
Wastewater treatment agent, the textile industry, combating desertification and sand-fixation, soil moisture agent, can also be used in the construction industry, construction glue, interior wall paint and so on.
Specifications
Appearance: white granular powder
Molecular weight(million): ≥18
Water insoluble(wt%): ≤0.1
Ion degree(%):≤5
Dissolving speed ( H): ≤ 2
Residual monomer (%): ≤ 0.1
Solid content(%): ≥ 88
a.)Good for water treatment
b)Very useful in paper making
c) Industrial treatment and recycling.
PAM for Water Treatment
Non-ionic polyacrylamide is formed by the homopolymerization of acrylamide. It has high purity ,good fuction,wide uses, and its main usages are as follows:
1) It is the raw mateials used for the changed pam, for example, anionic pam .we can get them from the hydrolysis by choosing different types of nonionic pam.
2) Textile industry auxiliary .It can be made into slurry chemicals by adding other additives. For textile sizing, can improve the adhesion, penetration and performance of pulp removal, the fabric has anti-static, reduce sizing rate, plasma cutter to reduce plaque, cloth breakage rate and litter.
3) Agent for the wastewater treatment.
4) Agent for the desert treatment
5) Good way for soil improvement in the dry area.
6) Agent for oil field plugging
7) Can be use in architecture, and paint for interior wall.
Wastewater treatment agent, the textile industry, combating desertification and sand-fixation, soil moisture agent, can also be used in the construction industry, construction glue, interior wall paint and so on.
Specifications
Appearance: white granular powder
Molecular weight(million): ≥18
Water insoluble(wt%): ≤0.1
Ion degree(%):≤5
Dissolving speed ( H): ≤ 2
Residual monomer (%): ≤ 0.1
Solid content(%): ≥ 88
Effective Poly Aluminium Chloride flocculant
Poly Aluminium Chloride :
1)Fast Flocculating sedimentation speed
2)Wide PH adaptation range
3)Free samples are available
Polyaluminium Chloride(PAC)
Process industrial water and industrial circulating water.
The product can be used to reclaim mine flushing waste water and ceramic industry waste water.
The product can be used to process river water,lake water and underground water, and also can be used in printing plants,leather factory,meat processing plant,pharmacutical plant,coal washing,and mines and can be used to process waste water containing,oil and heavy metal.
Features:
compared with other coagulants,this product possesses the following advantages
1.Wider application,better water adaptation.
2.Quickly shape bi alum bubble, and with good precipitation
3.Better adaptation to PH value,and little declining range of PH value and alkalinity of water after treatment.
4.Keeping stable preciaption effect at lower water temperature.
5.Higher alkalization than other aluminium salt and iron salt, and little erosion to equipments.
Product technical specification
Name
solid
Excellent article
First-class article
AL
2
o
3
%≥
30.0
28.0
Base saturability %
40-90
40-90
Water insoluble content
0.3
1.0
PH(1% water solution)
3.5-5.0
3.5-5.0
N %≤
0.01
As% ≤
0.0002
Pb%≤
0.001
Cd%≤
0.0002
Hg%≤
0.00001
Cr
6+
%≤
0.0005
1)Fast Flocculating sedimentation speed
2)Wide PH adaptation range
3)Free samples are available
Polyaluminium Chloride(PAC)
Process industrial water and industrial circulating water.
The product can be used to reclaim mine flushing waste water and ceramic industry waste water.
The product can be used to process river water,lake water and underground water, and also can be used in printing plants,leather factory,meat processing plant,pharmacutical plant,coal washing,and mines and can be used to process waste water containing,oil and heavy metal.
Features:
compared with other coagulants,this product possesses the following advantages
1.Wider application,better water adaptation.
2.Quickly shape bi alum bubble, and with good precipitation
3.Better adaptation to PH value,and little declining range of PH value and alkalinity of water after treatment.
4.Keeping stable preciaption effect at lower water temperature.
5.Higher alkalization than other aluminium salt and iron salt, and little erosion to equipments.
Product technical specification
Name
solid
Excellent article
First-class article
AL
2
o
3
%≥
30.0
28.0
Base saturability %
40-90
40-90
Water insoluble content
0.3
1.0
PH(1% water solution)
3.5-5.0
3.5-5.0
N %≤
0.01
As% ≤
0.0002
Pb%≤
0.001
Cd%≤
0.0002
Hg%≤
0.00001
Cr
6+
%≤
0.0005
Effective Polyaluminium Chloride
Polyaluminium chloride
Fast flocculent setting speed
Wide scope to PH value
Obvious water purification effect
Polyaluminium Chloride
Application:
PAC is mainly used as the flocculant agent for the treatment of drinking water
and industrial wastewater (such as printing and dyeing water and pulping wastewater).
It also widely applies to precise casting, paper-making, tanning and other industries.
Main technical index:
Index name
Product grade
Drinking water
Non-drinking water
Al2O3
Min 29-32
Min 29-30
Basicity %
50-85
60-85
PH value
3.5-5
3.5-5
Content of water insoluble
Max 0.5-1.5
Max 1.5-3
Pb
PPm max 3.0
As
PPm max 0.5
Fe
PPm max 0.3
Hg
PPm max 0.2
Outstanding features:
Fast flocculent setting speed
Wide scope to PH value
Obvious water purification effect
Fast flocculent setting speed
Wide scope to PH value
Obvious water purification effect
Polyaluminium Chloride
Application:
PAC is mainly used as the flocculant agent for the treatment of drinking water
and industrial wastewater (such as printing and dyeing water and pulping wastewater).
It also widely applies to precise casting, paper-making, tanning and other industries.
Main technical index:
Index name
Product grade
Drinking water
Non-drinking water
Al2O3
Min 29-32
Min 29-30
Basicity %
50-85
60-85
PH value
3.5-5
3.5-5
Content of water insoluble
Max 0.5-1.5
Max 1.5-3
Pb
PPm max 3.0
As
PPm max 0.5
Fe
PPm max 0.3
Hg
PPm max 0.2
Outstanding features:
Fast flocculent setting speed
Wide scope to PH value
Obvious water purification effect
Effective Polyaluminium chloride( 30%) for drinking water treatment
Polyaluminium chloride:
1)Stable chemical stability
2)High efficient flocculant effect
3)Free samples are available
Polyaluminium chloride:
It is an inorganic polymer coagulant. Mainly through compression double, adsorption electricity neutralization, adsorption Bridging, sediment enmesh and other mechanisms, make edema subtle suspended particles and colloidal ions get out of stability , gathered, flocculation, coagulation, precipitation to achieve the purification treatment effect
Product technical data
Name
solid
Excellent article
First-class article
AL
2
o
3
%≥
30.0
28.0
Base saturability %
40-90
40-90
Water insoluble content
0.3
1.0
PH(1% water solution)
3.5-5.0
3.5-5.0
N %≤
0.01
As% ≤
0.0002
Pb%≤
0.001
Cd%≤
0.0002
Hg%≤
0.00001
Cr
6+
%≤
0.0005
Usage amount reference:
Turbidity
100-250
400-500
1000-5000
7500
Dosage 1mg/L
4
8
15
20
Turbidity after treatment
3
5
6
8
1)Stable chemical stability
2)High efficient flocculant effect
3)Free samples are available
Polyaluminium chloride:
It is an inorganic polymer coagulant. Mainly through compression double, adsorption electricity neutralization, adsorption Bridging, sediment enmesh and other mechanisms, make edema subtle suspended particles and colloidal ions get out of stability , gathered, flocculation, coagulation, precipitation to achieve the purification treatment effect
Product technical data
Name
solid
Excellent article
First-class article
AL
2
o
3
%≥
30.0
28.0
Base saturability %
40-90
40-90
Water insoluble content
0.3
1.0
PH(1% water solution)
3.5-5.0
3.5-5.0
N %≤
0.01
As% ≤
0.0002
Pb%≤
0.001
Cd%≤
0.0002
Hg%≤
0.00001
Cr
6+
%≤
0.0005
Usage amount reference:
Turbidity
100-250
400-500
1000-5000
7500
Dosage 1mg/L
4
8
15
20
Turbidity after treatment
3
5
6
8
Effective activated alumina adsorbent
Activated alumina:
1)Large capacity of absorption
2)High strength and thermal stability
3)Developed pore structure
Product introduction
Activated alumina;
Chinese name. [English] active Alumina Alumina controller name, Reactive alumina, Um alumin controller (I) oxide catalyst in the noun "used in explanation of alumina usually only called" the activated alumina ", it is a kind of porous, high dispersion of solid material, a large surface area, its pore surface has required the catalytic properties, such as adsorption, surface activity, high thermal stability, etc, so widely used for chemical reaction and catalyst carriers.
Application:
Activated alumina is widely utilized in the drying agent of multiform gas and liquid, also function is used as sorbent,desiccant,catalyst support in reactors for petrochemical industry,chemical industry, fertilizer industry and so on.
Main usage:
1) As absorbent,it is ,mainly used in different kinds ofhydrocarbon gas,petroleum cracking gas to absorb,Dehydrate,which belongs to the unversal type.
2)As fluorine-removal agent is mainly to remove the fluorine in the drinking water and industrial water.
3)As recycling agent,it is used in the anthraquinone process hydrogen peroxide as absorbent.
4)As catalyst carrier,it is mainly used for all kinds of catalyst carrier.
5) As desiccant,it is used as drier in the air.
Product technical specifications
Index name
Al
2
o
3
%
Sio
2
%
Fe
2
o3
%
Na20
%
Burning reduction
%
Apparent density
g/ml
Specific surface area
M
2
/g
Hole volume
Ml/g
Crush strength
N/particle
Technical
requirements
≥92
≤
0.10
≤
0.04
≤
0.45
≤8
≤0.75
≥260
≥0.40
≥20
1-2mm
≥92
≤
0.10
≤
0.04
≤
0.45
≤8
≤0.75
≥260
≥0.40
≥40
2-3mm
≥92
≤
0.10
≤
0.04
≤
0.45
≤8
≤0.75
≥260
≥0.40
≥80
3-5mm
≥92
≤
0.10
≤
0.04
≤
0.45
≤8
≤0.75
≥260
≥0.40
≥100
4-6mm
≥92
≤
0.10
≤
0.04
≤
0.45
≤8
≤0.75
≥260
≥0.40
≥140
5-8mm
1)Large capacity of absorption
2)High strength and thermal stability
3)Developed pore structure
Product introduction
Activated alumina;
Chinese name. [English] active Alumina Alumina controller name, Reactive alumina, Um alumin controller (I) oxide catalyst in the noun "used in explanation of alumina usually only called" the activated alumina ", it is a kind of porous, high dispersion of solid material, a large surface area, its pore surface has required the catalytic properties, such as adsorption, surface activity, high thermal stability, etc, so widely used for chemical reaction and catalyst carriers.
Application:
Activated alumina is widely utilized in the drying agent of multiform gas and liquid, also function is used as sorbent,desiccant,catalyst support in reactors for petrochemical industry,chemical industry, fertilizer industry and so on.
Main usage:
1) As absorbent,it is ,mainly used in different kinds ofhydrocarbon gas,petroleum cracking gas to absorb,Dehydrate,which belongs to the unversal type.
2)As fluorine-removal agent is mainly to remove the fluorine in the drinking water and industrial water.
3)As recycling agent,it is used in the anthraquinone process hydrogen peroxide as absorbent.
4)As catalyst carrier,it is mainly used for all kinds of catalyst carrier.
5) As desiccant,it is used as drier in the air.
Product technical specifications
Index name
Al
2
o
3
%
Sio
2
%
Fe
2
o3
%
Na20
%
Burning reduction
%
Apparent density
g/ml
Specific surface area
M
2
/g
Hole volume
Ml/g
Crush strength
N/particle
Technical
requirements
≥92
≤
0.10
≤
0.04
≤
0.45
≤8
≤0.75
≥260
≥0.40
≥20
1-2mm
≥92
≤
0.10
≤
0.04
≤
0.45
≤8
≤0.75
≥260
≥0.40
≥40
2-3mm
≥92
≤
0.10
≤
0.04
≤
0.45
≤8
≤0.75
≥260
≥0.40
≥80
3-5mm
≥92
≤
0.10
≤
0.04
≤
0.45
≤8
≤0.75
≥260
≥0.40
≥100
4-6mm
≥92
≤
0.10
≤
0.04
≤
0.45
≤8
≤0.75
≥260
≥0.40
≥140
5-8mm
Effective activated alumina defluoridation
Activated alumina:
1)High quality, competitive price
2)High strength and thermal stability
3)Developed pore structure
Product introduction
Activated alumina
is also widely used to remove fluoride from drinking water. In the US, there are widespread programs to fluoridate drinking water. However, in certain regions, such as the Jaipur region of India, there is enough fluorine in the water to cause fluorosis. Activated alumina filters can easily reduce fluoride levels from .5 ppm to less than .1 ppm. The amount of fluoride leached from the water being filtered depends on how long the water is actually touching the alumina filter media. Basically, the more alumina in the filter, the less fluoride will be in the final, filtered water. Lower temperature water, and lower pH water (acidic water) are filtered more effectively too.
Defluoridation agent
Activated Aluminas
are synthetically produced amorphous oxides from aluminum trihydrate. The end product is a beaded material or powder with highly adsorptive capabilities. It is used as a Claus Catalyst in natural gas and refining and can reduce the dewpoint of the air to -40C. Special grades can reduce the dewpoint to less than -100C. With new technology, we can now remove a variety of contaminants from styrene, polyethylene, ethylene, light hydrocarbons and air. Aluminas are very nonreactive adsorbents giving off low heats of adsorption. Surface areas and surface areas can be controlled during manufacturing to allow for custom purification applications.
Product technical specifications
Index name
Al
2
o
3
%
Sio
2
%
Fe
2
o3
%
Na20
%
Burning reduction
%
Apparent density
g/ml
Specific surface area
M
2
/g
Hole volume
Ml/g
Crush strength
N/particle
Technical
requirements
≥92
≤
0.10
≤
0.04
≤
0.45
≤8
≤0.75
≥260
≥0.40
≥20
1-2mm
≥92
≤
0.10
≤
0.04
≤
0.45
≤8
≤0.75
≥260
≥0.40
≥40
2-3mm
≥92
≤
0.10
≤
0.04
≤
0.45
≤8
≤0.75
≥260
≥0.40
≥80
3-5mm
≥92
≤
0.10
≤
0.04
≤
0.45
≤8
≤0.75
≥260
≥0.40
≥100
4-6mm
≥92
≤
0.10
≤
0.04
≤
0.45
≤8
≤0.75
≥260
≥0.40
≥140
5-8mm
1)High quality, competitive price
2)High strength and thermal stability
3)Developed pore structure
Product introduction
Activated alumina
is also widely used to remove fluoride from drinking water. In the US, there are widespread programs to fluoridate drinking water. However, in certain regions, such as the Jaipur region of India, there is enough fluorine in the water to cause fluorosis. Activated alumina filters can easily reduce fluoride levels from .5 ppm to less than .1 ppm. The amount of fluoride leached from the water being filtered depends on how long the water is actually touching the alumina filter media. Basically, the more alumina in the filter, the less fluoride will be in the final, filtered water. Lower temperature water, and lower pH water (acidic water) are filtered more effectively too.
Defluoridation agent
Activated Aluminas
are synthetically produced amorphous oxides from aluminum trihydrate. The end product is a beaded material or powder with highly adsorptive capabilities. It is used as a Claus Catalyst in natural gas and refining and can reduce the dewpoint of the air to -40C. Special grades can reduce the dewpoint to less than -100C. With new technology, we can now remove a variety of contaminants from styrene, polyethylene, ethylene, light hydrocarbons and air. Aluminas are very nonreactive adsorbents giving off low heats of adsorption. Surface areas and surface areas can be controlled during manufacturing to allow for custom purification applications.
Product technical specifications
Index name
Al
2
o
3
%
Sio
2
%
Fe
2
o3
%
Na20
%
Burning reduction
%
Apparent density
g/ml
Specific surface area
M
2
/g
Hole volume
Ml/g
Crush strength
N/particle
Technical
requirements
≥92
≤
0.10
≤
0.04
≤
0.45
≤8
≤0.75
≥260
≥0.40
≥20
1-2mm
≥92
≤
0.10
≤
0.04
≤
0.45
≤8
≤0.75
≥260
≥0.40
≥40
2-3mm
≥92
≤
0.10
≤
0.04
≤
0.45
≤8
≤0.75
≥260
≥0.40
≥80
3-5mm
≥92
≤
0.10
≤
0.04
≤
0.45
≤8
≤0.75
≥260
≥0.40
≥100
4-6mm
≥92
≤
0.10
≤
0.04
≤
0.45
≤8
≤0.75
≥260
≥0.40
≥140
5-8mm
3.Macroporous strongly acidic styrene cation exchange resin
1. Appearance: from camel to brown
2. Ionic form as delivered Cl
3. Moisture content% 45-55
It is mainly used for waste water treatment and heavy-metal recovery.
Appearance Opaque spherical particle with a color range from camel to brown
Ionic form as delivered Cl
Moisture content% 45-55
Total exchange capacity (quality)mmol/g ≥4.35
Total exchange capacity(volume) mmol/ml ≥1.75
Specific gravity/ml 0.75-0.85
Bulk density g/ml 1.25-1.28
Range granularity %(0.45-1.25mm) ≥95
Lower –limit granularity %(<0.45mm)≤1.0
Effective Size mm ≥0.5
Uniformity coefficient ≤1.60
Spherical after affrition% ≥90
Spherical after osmotic-affrition% ≥60DL519-2004
2. Ionic form as delivered Cl
3. Moisture content% 45-55
It is mainly used for waste water treatment and heavy-metal recovery.
Appearance Opaque spherical particle with a color range from camel to brown
Ionic form as delivered Cl
Moisture content% 45-55
Total exchange capacity (quality)mmol/g ≥4.35
Total exchange capacity(volume) mmol/ml ≥1.75
Specific gravity/ml 0.75-0.85
Bulk density g/ml 1.25-1.28
Range granularity %(0.45-1.25mm) ≥95
Lower –limit granularity %(<0.45mm)≤1.0
Effective Size mm ≥0.5
Uniformity coefficient ≤1.60
Spherical after affrition% ≥90
Spherical after osmotic-affrition% ≥60DL519-2004
Effective activated alumina defluoridation
Activated alumina
(1) smooth surface
(2) great mechnical strength
(3) non-toxic
(4) insoluble in water and organic solvents
Activated alumina
1.The products are used for alumina with high purity and are produced by scientific allocation
and catalytic refining.
2.They are white granules with globular porosity, epigranular, smooth surface,
great mechanical strength, strong moisture absorption, no expansion and
cracking but remain original shape when absorbing water and they are non-toxic,
no smell, odorless and insoluble to water and organic solvents.
3.They can be used for fluoride removal, arsenic removal, sewage decolorization
and deodorant of drinking water and industrial devices, etc.
4.Fluoride removal activated alumina can be used with household fluorine cylinder,
which has 1.6kg AA-102 fluoride agents inside. It is very easy and convenient to
operate and is the ideal Defluoridative device in the family.
The fluoride removal agents can also be used with fluoride removal device of the
waterworks and industry.
Key technical indexes
Index names
appearance
Bulk specific weight (g/cm
3
)
Specific surface area (m
2
/g)
Pore volume
(cm
3
/g)
Compressive strength
(n/balls)
Wear rate
(W/W, 5%)
AA-102-1
1.6-2.4mm
Min 0.70
Min 300
Min 0.38
Min 35
Max 0.60
AA-102-2
2-3mm
Min 0.70
Min 300
Min 0.38
Min 80
Max 0.60
AA-102-3
3-5mm
Min 0.70
Min 300
Min 0.38
Min 80
Max 0.60
AA-102-4
5-8mm
Min 0.70
Min 300
Min 0.38
Min 80
Max 0.60
(1) smooth surface
(2) great mechnical strength
(3) non-toxic
(4) insoluble in water and organic solvents
Activated alumina
1.The products are used for alumina with high purity and are produced by scientific allocation
and catalytic refining.
2.They are white granules with globular porosity, epigranular, smooth surface,
great mechanical strength, strong moisture absorption, no expansion and
cracking but remain original shape when absorbing water and they are non-toxic,
no smell, odorless and insoluble to water and organic solvents.
3.They can be used for fluoride removal, arsenic removal, sewage decolorization
and deodorant of drinking water and industrial devices, etc.
4.Fluoride removal activated alumina can be used with household fluorine cylinder,
which has 1.6kg AA-102 fluoride agents inside. It is very easy and convenient to
operate and is the ideal Defluoridative device in the family.
The fluoride removal agents can also be used with fluoride removal device of the
waterworks and industry.
Key technical indexes
Index names
appearance
Bulk specific weight (g/cm
3
)
Specific surface area (m
2
/g)
Pore volume
(cm
3
/g)
Compressive strength
(n/balls)
Wear rate
(W/W, 5%)
AA-102-1
1.6-2.4mm
Min 0.70
Min 300
Min 0.38
Min 35
Max 0.60
AA-102-2
2-3mm
Min 0.70
Min 300
Min 0.38
Min 80
Max 0.60
AA-102-3
3-5mm
Min 0.70
Min 300
Min 0.38
Min 80
Max 0.60
AA-102-4
5-8mm
Min 0.70
Min 300
Min 0.38
Min 80
Max 0.60
Effective cationic Polyacrylamide
Cationic Polyacrylamide:
1)High efficient flocculant
2)Free samples are available
3)Stable chemical pproperty
Polyacrylamide (PAM)
Cationic polyacrylamide
is the copolymerization between cationic monomer (DM, DMC, DMAEMA DMDAAC, etc) and acrylamide, this kind of white small granule or powder through prilling, drying and crushing. The molecular weight of cationic PAM is usually lower than anionic or nonionic polymers, their clarify performance mainly obtained through charge neutrality effect.
Usage of the product
The main functions of this kind of flocculant are to flocculant negative charged colloid; it can remove turbidity, decoloring and so on. Suitable for the wastewater with organic colloid content. Such as dyeing, papermaking, foodstuff, aquatic products processing and other industrial wastewater, and sludge dewatering in city underground water treatment craft, etc. Cities and industrial sewage usually activated sludge treatment method; biochemical sludge is often the colloid with strong hydrophilism. It is difficult to take off the containing water. The good dehydration effect will be received if you use cationic PAM flocculant.
Product technical data:
Name
MolecularWeight(ten thousand)
Ion degrees(%)
Solid Content(%)
remnant
list %
hydrolysis
Dissolve
Time
(min)
CPAM
------ ----
10-50
≥90
≤0.05
20-25
≤40
APAM
600-2000
--- --
≥90
≤0.05
20-30
≤60
1)High efficient flocculant
2)Free samples are available
3)Stable chemical pproperty
Polyacrylamide (PAM)
Cationic polyacrylamide
is the copolymerization between cationic monomer (DM, DMC, DMAEMA DMDAAC, etc) and acrylamide, this kind of white small granule or powder through prilling, drying and crushing. The molecular weight of cationic PAM is usually lower than anionic or nonionic polymers, their clarify performance mainly obtained through charge neutrality effect.
Usage of the product
The main functions of this kind of flocculant are to flocculant negative charged colloid; it can remove turbidity, decoloring and so on. Suitable for the wastewater with organic colloid content. Such as dyeing, papermaking, foodstuff, aquatic products processing and other industrial wastewater, and sludge dewatering in city underground water treatment craft, etc. Cities and industrial sewage usually activated sludge treatment method; biochemical sludge is often the colloid with strong hydrophilism. It is difficult to take off the containing water. The good dehydration effect will be received if you use cationic PAM flocculant.
Product technical data:
Name
MolecularWeight(ten thousand)
Ion degrees(%)
Solid Content(%)
remnant
list %
hydrolysis
Dissolve
Time
(min)
CPAM
------ ----
10-50
≥90
≤0.05
20-25
≤40
APAM
600-2000
--- --
≥90
≤0.05
20-30
≤60
Effective keyuan activated alumina adsorbent
Activated alumina adsorbentt:
High compressive hardness
Long operation cycle
Product introduction
Activated alumina ball
has much micro-paths, so the specific surface is large.It can be used asabsorbent desiccant and catalyst carrier. It is also a kind of trace water desiccant and the pole-molecular absorbent, according to the absorbed molecular polarization, the attachment force is strong for water, oxide, acetic acid, alkali etc.
Characteistics of the product
The product is a white,spherical porous material with the property of non-toxic,odorless,insoluble in water and ethanol. The particle size is uniform, the surface is smooth, the mechanical is strength, the ability of moisture absorption is strong and the ball is not split after absorbing water. In certain operation conditions and regeneration conditions, the dry depth can below the dew point temperature-70 degrees, the product can be used as defluorinate agent for high fluorided drinking water,as fluoride removal agent(fluoride removal capacity of large) for alkane cycling in the alkyl-benzene production, as the depickling regeneration agent for transformer oil, as the dryer for some industries such as oxygen industry, textile industry, gas drying in electronics industry, air drying in automation intruments, as well as dryer and decontaminating agent for fertilizer, petrochemical and other industries(dew point can be up to-40 degrees), in air separation, the dew-point
adsorption of pressure change can up to-55 degrees.It is a high effective dryer for dry deeply in micro-water. It is an ideal dryer for non-thermal regeneration device.
Product technical specifications
Index name
Al
2
o
3
%
Sio
2
%
Fe
2
o3
%
Na20
%
Burning reduction
%
Apparent density
g/ml
Specific surface area
M
2
/g
Hole volume
Ml/g
Crush strength
N/particle
Technical
requirements
≥92
≤
0.10
≤
0.04
≤
0.45
≤8
≤0.75
≥260
≥0.40
≥20
1-2mm
≥92
≤
0.10
≤
0.04
≤
0.45
≤8
≤0.75
≥260
≥0.40
≥40
2-3mm
≥92
≤
0.10
≤
0.04
≤
0.45
≤8
≤0.75
≥260
≥0.40
≥80
3-5mm
≥92
≤
0.10
≤
0.04
≤
0.45
≤8
≤0.75
≥260
≥0.40
≥100
4-6mm
≥92
≤
0.10
≤
0.04
≤
0.45
≤8
≤0.75
≥260
≥0.40
≥140
5-8mm
High compressive hardness
Long operation cycle
Product introduction
Activated alumina ball
has much micro-paths, so the specific surface is large.It can be used asabsorbent desiccant and catalyst carrier. It is also a kind of trace water desiccant and the pole-molecular absorbent, according to the absorbed molecular polarization, the attachment force is strong for water, oxide, acetic acid, alkali etc.
Characteistics of the product
The product is a white,spherical porous material with the property of non-toxic,odorless,insoluble in water and ethanol. The particle size is uniform, the surface is smooth, the mechanical is strength, the ability of moisture absorption is strong and the ball is not split after absorbing water. In certain operation conditions and regeneration conditions, the dry depth can below the dew point temperature-70 degrees, the product can be used as defluorinate agent for high fluorided drinking water,as fluoride removal agent(fluoride removal capacity of large) for alkane cycling in the alkyl-benzene production, as the depickling regeneration agent for transformer oil, as the dryer for some industries such as oxygen industry, textile industry, gas drying in electronics industry, air drying in automation intruments, as well as dryer and decontaminating agent for fertilizer, petrochemical and other industries(dew point can be up to-40 degrees), in air separation, the dew-point
adsorption of pressure change can up to-55 degrees.It is a high effective dryer for dry deeply in micro-water. It is an ideal dryer for non-thermal regeneration device.
Product technical specifications
Index name
Al
2
o
3
%
Sio
2
%
Fe
2
o3
%
Na20
%
Burning reduction
%
Apparent density
g/ml
Specific surface area
M
2
/g
Hole volume
Ml/g
Crush strength
N/particle
Technical
requirements
≥92
≤
0.10
≤
0.04
≤
0.45
≤8
≤0.75
≥260
≥0.40
≥20
1-2mm
≥92
≤
0.10
≤
0.04
≤
0.45
≤8
≤0.75
≥260
≥0.40
≥40
2-3mm
≥92
≤
0.10
≤
0.04
≤
0.45
≤8
≤0.75
≥260
≥0.40
≥80
3-5mm
≥92
≤
0.10
≤
0.04
≤
0.45
≤8
≤0.75
≥260
≥0.40
≥100
4-6mm
≥92
≤
0.10
≤
0.04
≤
0.45
≤8
≤0.75
≥260
≥0.40
≥140
5-8mm
Efficient molds thimble lubricant spray
for molds thimble,central moving parts,tools
powerful lubricantion,good quality
spec:500ml/pc
warranty:MSDS SGS ROHS SVHC
QiQiang fine chemical (HK)co.ltd---QIKO
Certification :
SGS
RoHS
16P
TBBP-A
SVHC
PAHs
MSDS
OTHER
ISO9001
ISO 14001
AAA
Company introduction:
Our QiQiang fine chemical (HK)co.ltd estalished in 1998.We have 13 years experience of
manufacturing products with convenient transportation in guangdong ,China.We have AAA grade credit enterprises quality and is certificated by ISO9001 and ISO14001.With good
service and competitive price,we enjoy high reputation among our customers.We are also
willing to be your trustworthy supplier.
Product introduction:
Injection mold's thimble lubricant oil is made of imported synthetic base oil, antioxidant, anti-wear additives,.
It is widely use to injection molding machines and processing machine guide with thimble lubricating.
Usage:
thimble lubricant oil is suitable for various injection molding machine timbles.
especially for the central lubrication system.lubrication of moving parts ,electronics and toys.
Advantages:
Effectively extend the life of mechanical components.
Does not end plastic, not carbon, and can permanently lubricated, high temperature resistant
up to 220’c
High-quality lubricating oil of good oxidation stability, anti-wear and adhesion
Additives
excellent antirust and protection function.
powerful lubricantion,good quality
spec:500ml/pc
warranty:MSDS SGS ROHS SVHC
QiQiang fine chemical (HK)co.ltd---QIKO
Certification :
SGS
RoHS
16P
TBBP-A
SVHC
PAHs
MSDS
OTHER
ISO9001
ISO 14001
AAA
Company introduction:
Our QiQiang fine chemical (HK)co.ltd estalished in 1998.We have 13 years experience of
manufacturing products with convenient transportation in guangdong ,China.We have AAA grade credit enterprises quality and is certificated by ISO9001 and ISO14001.With good
service and competitive price,we enjoy high reputation among our customers.We are also
willing to be your trustworthy supplier.
Product introduction:
Injection mold's thimble lubricant oil is made of imported synthetic base oil, antioxidant, anti-wear additives,.
It is widely use to injection molding machines and processing machine guide with thimble lubricating.
Usage:
thimble lubricant oil is suitable for various injection molding machine timbles.
especially for the central lubrication system.lubrication of moving parts ,electronics and toys.
Advantages:
Effectively extend the life of mechanical components.
Does not end plastic, not carbon, and can permanently lubricated, high temperature resistant
up to 220’c
High-quality lubricating oil of good oxidation stability, anti-wear and adhesion
Additives
excellent antirust and protection function.
Empirical Polyaluminium Chloride
polyaluminium chloride (pac)
1,used for frinking water
2,Lght yellow or milky white powder
3,Best quaity and best price
Polyaluminium Chloride
Features of new high efficiency Polyaluminium Chloride features are
flocculating sedimentation
speed, adapting to the PH range,
and water purification effect is obvious.
It is
widely used in drinking water,
industrial water and sewage
disposal
areas.
the key technical indexes:
name
Products grade
Drinking water(1st class)
Non-drinking water(2nd class)
Al2O3
Min29-32
Min29-30
Basicity%
50-85
60-85
PH value
3.5-5
3.5-5
Water -insoluble content
Max0.5-1.5
Max1.5-3
Pb (ppm)
Max3
As (ppm)
Max0.5
Fe (ppm)
Max0.3
Hg( ppm)
Max0.2
Specific dosing quantity in the list below
Turbidity before treatment
30-100
100-250
250-400
400-1000
1000-5000
7500
Dosage(1mg/L)
2.51
3.44
4.45
6.13
12.47
19.9
Turbidity after treatment
3
3
5
5
6
8
1,used for frinking water
2,Lght yellow or milky white powder
3,Best quaity and best price
Polyaluminium Chloride
Features of new high efficiency Polyaluminium Chloride features are
flocculating sedimentation
speed, adapting to the PH range,
and water purification effect is obvious.
It is
widely used in drinking water,
industrial water and sewage
disposal
areas.
the key technical indexes:
name
Products grade
Drinking water(1st class)
Non-drinking water(2nd class)
Al2O3
Min29-32
Min29-30
Basicity%
50-85
60-85
PH value
3.5-5
3.5-5
Water -insoluble content
Max0.5-1.5
Max1.5-3
Pb (ppm)
Max3
As (ppm)
Max0.5
Fe (ppm)
Max0.3
Hg( ppm)
Max0.2
Specific dosing quantity in the list below
Turbidity before treatment
30-100
100-250
250-400
400-1000
1000-5000
7500
Dosage(1mg/L)
2.51
3.44
4.45
6.13
12.47
19.9
Turbidity after treatment
3
3
5
5
6
8
Emulsifier Cation Surfactant 1227
Cation Surfactant is a kind of water quality stabilizer for large-scale petrochemical plant, with the effect of fungicide
Cation Surfactant
Chemical Agent Surfactant 1227
Cation generated in the water dissociation activity of the Group, with sterilization, emulsification, anti-static performance such as soft, mainly for large-scale petrochemical plant in water stabilizer, oil and water fungicides.
Main performance index of the product :
a) Appearance : colorless to pale yellow transparent homogeneous liquid
b) Content : 45 ± 2%
c) PH value of aqueous solution of 1 : 6 ~ 8
d) Ionic: cationic
e) Free amine content : ≤ 1.5%
Cation Surfactant
Chemical Agent Surfactant 1227
Cation generated in the water dissociation activity of the Group, with sterilization, emulsification, anti-static performance such as soft, mainly for large-scale petrochemical plant in water stabilizer, oil and water fungicides.
Main performance index of the product :
a) Appearance : colorless to pale yellow transparent homogeneous liquid
b) Content : 45 ± 2%
c) PH value of aqueous solution of 1 : 6 ~ 8
d) Ionic: cationic
e) Free amine content : ≤ 1.5%
Emulsion PAM
1.liquid flocculant with high efficiency and high concentration.
2.water-in-oil(W/O)
3.papermaking and sewage treatment
1. The product with high conversion rate, high molecular weight, high stability, multi-function, instant dissolution .etc.
2. As retention and drainage aid in papermaking. Is widely used for culture paper, newspaper and cardboard paper, etc.
3. As water treatment chemical, it is widely used for treatment of city domestic sewage, wastewater from papermaking, dyeing, coal washing, mineral separation and other industrial wastewater treamtment.
4. Aids in oil driling.
Specification
Mode
Brookfield Viscosity UI(cps)
Solid Content(%)
PH Value
Dissolving Time(min)
Anionic emulsion polyacrylamide
3-9
30-50
5-8
5-10
Cationic emulsion polyacrylamide
3-6
35-50
4-8
5-10
Nonionic emulsion polyacrylamide
3-6
35-50
5-8
5-10
2.water-in-oil(W/O)
3.papermaking and sewage treatment
1. The product with high conversion rate, high molecular weight, high stability, multi-function, instant dissolution .etc.
2. As retention and drainage aid in papermaking. Is widely used for culture paper, newspaper and cardboard paper, etc.
3. As water treatment chemical, it is widely used for treatment of city domestic sewage, wastewater from papermaking, dyeing, coal washing, mineral separation and other industrial wastewater treamtment.
4. Aids in oil driling.
Specification
Mode
Brookfield Viscosity UI(cps)
Solid Content(%)
PH Value
Dissolving Time(min)
Anionic emulsion polyacrylamide
3-9
30-50
5-8
5-10
Cationic emulsion polyacrylamide
3-6
35-50
4-8
5-10
Nonionic emulsion polyacrylamide
3-6
35-50
5-8
5-10
Emulsion polyacrylamide
1.Emulsion polyacrylamide
2.Polyacrylamide
3.Sludge dewatering
4.Coagulant aid
5.PAM for paper making
PAM
Emulsion polyacrylamide
This product is technically named Polyacrylamide, which is a water soluble macromolecular polymer. It is insoluble in most organic solvents. It generates a good flocculation and reduces the resistance between liquids.
Item
Index
Appearance
white sand-like powder or colorless transparent colloid
Molecular Weight
4-13 million
Anionic Degree
0-100%
Note:We can supply different Molecular Weight and Cationic Degree as customer request.
1.It is recommended to prepare the product in water solution at 0.1% concentration. It is proposed to use the neutral and desalted water.
2.The product should be scattered evenly in the stirred water, and the dissolving can be accelerated by warming the water (below 60°C).
3.The most economical dosage can be determined based by a preliminary test.
4.The solid product is packed in inner plastic bags and further in polypropylene woven bags with each bag containing 25Kg.The colloidal product is packed in inner plastic bags and further in fiber plate drums with each drum containing 50Kg or 200Kg.
5.This product is hygroscopic, so it is should be sealed and stored in a dry and cool place below 35°C.
6.The solid product should be prevented from leaking on the ground because the hygroscopic powder can make the floor slippery.
2.Polyacrylamide
3.Sludge dewatering
4.Coagulant aid
5.PAM for paper making
PAM
Emulsion polyacrylamide
This product is technically named Polyacrylamide, which is a water soluble macromolecular polymer. It is insoluble in most organic solvents. It generates a good flocculation and reduces the resistance between liquids.
Item
Index
Appearance
white sand-like powder or colorless transparent colloid
Molecular Weight
4-13 million
Anionic Degree
0-100%
Note:We can supply different Molecular Weight and Cationic Degree as customer request.
1.It is recommended to prepare the product in water solution at 0.1% concentration. It is proposed to use the neutral and desalted water.
2.The product should be scattered evenly in the stirred water, and the dissolving can be accelerated by warming the water (below 60°C).
3.The most economical dosage can be determined based by a preliminary test.
4.The solid product is packed in inner plastic bags and further in polypropylene woven bags with each bag containing 25Kg.The colloidal product is packed in inner plastic bags and further in fiber plate drums with each drum containing 50Kg or 200Kg.
5.This product is hygroscopic, so it is should be sealed and stored in a dry and cool place below 35°C.
6.The solid product should be prevented from leaking on the ground because the hygroscopic powder can make the floor slippery.
Enviromental Polyacrylamide In Water Fields
Polyacrylamide
1.strong water-soluble
2.thermal stability
3.Non-dangerous, non-toxic, non-corrosive
Polyacrylamide
Use properties
1) flocculation sex: polyacrylamide can make the suspended material through electric bridge, adsorption, flocculation effect since.
2) springiness, PAM can through mechanical and physical and chemical bonding effect and function.
3) dray reduction sex: polyacrylamide can effectively reduce the friction resistance, water flow can trace PAM resistance reduction of 50-80.
4) thickening sex: polyacrylamide in neutral and acid conditions were, when thickening in 10 ° above PH PAM easy hydrolysis. A half mesh structure, thickening will more apparent.
PAM principle of introduction
1) flocculation mechanism: polyacrylamide for flocculation, BeiXu and surface properties of species, especially the dynamic potential, viscosity, turbidity and suspension PH value, particle surface of potential, is the reason to join polymerization particle surface charge instead PAM, can reduce hydraulic. And potentials,
2) adsorption of polyacrylamide molecular chain Bridges: fixed in different particles on the surface, the granular form between polymer bridge, make granules form micelles and settlement.
3) surface adsorption of molecular polyacrylamide: all kinds of adsorption polargroup particles.
4) enhancing effect: the polyacrylamide with computed by molecular chain mechanical, physics, chemistry, etc, will be dispersed phase involved together, forming mesh, thus enhanced role plays.
Anionic PAM specifications:
Item
C1610
C1620
C1635
C1650
Ion content
Low
Middle
Middle
High
Molecular weight(per 10 thousand)
1000-1200
1000-1200
800-1000
800-1000
Solid content
Min 90%
Min 90%
Min 90%
Min 90%
Free monomer
Max 0.05%
Max 0.05%
Max 0.05%
Max0.05%
Dissolution time
Max 40
Max 40
Max 40
Max 40
Cationic PAM specifications
:
Item
Date
Molecular weight (per 10 thousand)
800-1000
1000-1200
1300-1500
1600-2000
Ion content
25-45
45-55
55-60
65-75
Solid content
88±2%
88±2%
88±2%
88±2%
Hydrolysis degree
20-30
20-30
20-30
20-30
Residual monomer
Max 0.05%
Max 0.05%
Max 0.05%
Max 0.05%
Dissolution time
Max 2h
Max 2h
Max 2h
Max 2h
Appearance
White granules
1.strong water-soluble
2.thermal stability
3.Non-dangerous, non-toxic, non-corrosive
Polyacrylamide
Use properties
1) flocculation sex: polyacrylamide can make the suspended material through electric bridge, adsorption, flocculation effect since.
2) springiness, PAM can through mechanical and physical and chemical bonding effect and function.
3) dray reduction sex: polyacrylamide can effectively reduce the friction resistance, water flow can trace PAM resistance reduction of 50-80.
4) thickening sex: polyacrylamide in neutral and acid conditions were, when thickening in 10 ° above PH PAM easy hydrolysis. A half mesh structure, thickening will more apparent.
PAM principle of introduction
1) flocculation mechanism: polyacrylamide for flocculation, BeiXu and surface properties of species, especially the dynamic potential, viscosity, turbidity and suspension PH value, particle surface of potential, is the reason to join polymerization particle surface charge instead PAM, can reduce hydraulic. And potentials,
2) adsorption of polyacrylamide molecular chain Bridges: fixed in different particles on the surface, the granular form between polymer bridge, make granules form micelles and settlement.
3) surface adsorption of molecular polyacrylamide: all kinds of adsorption polargroup particles.
4) enhancing effect: the polyacrylamide with computed by molecular chain mechanical, physics, chemistry, etc, will be dispersed phase involved together, forming mesh, thus enhanced role plays.
Anionic PAM specifications:
Item
C1610
C1620
C1635
C1650
Ion content
Low
Middle
Middle
High
Molecular weight(per 10 thousand)
1000-1200
1000-1200
800-1000
800-1000
Solid content
Min 90%
Min 90%
Min 90%
Min 90%
Free monomer
Max 0.05%
Max 0.05%
Max 0.05%
Max0.05%
Dissolution time
Max 40
Max 40
Max 40
Max 40
Cationic PAM specifications
:
Item
Date
Molecular weight (per 10 thousand)
800-1000
1000-1200
1300-1500
1600-2000
Ion content
25-45
45-55
55-60
65-75
Solid content
88±2%
88±2%
88±2%
88±2%
Hydrolysis degree
20-30
20-30
20-30
20-30
Residual monomer
Max 0.05%
Max 0.05%
Max 0.05%
Max 0.05%
Dissolution time
Max 2h
Max 2h
Max 2h
Max 2h
Appearance
White granules
Enviromental Protection 4A Zeolite Filter Media
Zeolite Filter
1.ISO9001
2.high exchange capacity
3.strong adsorption
4.lower cost&better service
Zeolite filter
1. Natural clinoptilolite filter Natural zeolite
is aluminosilicate, the appearance is white or bolarious.
It belongs to weakly acidic cationic exchange agent. After add the activated component, make it has better ion exchange or adsorption ability, and the adsorption energy also increase accordingly.
This kind of filter is mainly used for small boiler water conditioning, removing the calcium,magnesium ions in the water, in order to reduce the boiler scale formation and less the corrosion, at the same prolong the service life of the boiler.
In the waste water treatment, it can wipe off phosphorus, lead and hexavalent chromium. Invalided zeolite can be also used concentrated brine counter-current.
Natural clinoptilolite filter's chemical and physical index:
Proportion(g/cm3)
2.2-2.6
Silt Content%
≤1.0
Volumeweight(g/cm3)
1.6
Moisture%
≤1.5
Ware Rate%
<1.0
Sodium ion Exchange Ability
≥800
2. Activation zeolite filter Activation zeolite filter
is made by the natural zeolite after special activation.
The adsorption ability and the ion exchange capacity is better than the natural zeolite.
It is not only dislodge turbidity, chroma and peculiar smell, but also can adsorb harmful metals in the water(chrome, cadmium, nickel, zinc, mercury, iron ions) and organic in the water(phenol, phosphate radical ion). This product is conductive to dislodge various micro pollutants and has no harmful substances.
Therefore, activation zeolite filter is the ideal material for industrial water, waste water treatment and tap water filtration.
Performance Analysis:
Density g/cm3
1.8-2.2
Filtering Velocity m/h
4-12
Volumeweight g/cm3
1.4
Wear Rate%
<0.5
Pore Ratio%
≥50
Broken Rate%
<1.0
Specific Surface Area m2/g
500-800
Silt Content%
<1.0
Hydrochloric Acid Solute Rate%
≤0.1
All Exchange Work Capacity mg/g
2.2-2.5
1.ISO9001
2.high exchange capacity
3.strong adsorption
4.lower cost&better service
Zeolite filter
1. Natural clinoptilolite filter Natural zeolite
is aluminosilicate, the appearance is white or bolarious.
It belongs to weakly acidic cationic exchange agent. After add the activated component, make it has better ion exchange or adsorption ability, and the adsorption energy also increase accordingly.
This kind of filter is mainly used for small boiler water conditioning, removing the calcium,magnesium ions in the water, in order to reduce the boiler scale formation and less the corrosion, at the same prolong the service life of the boiler.
In the waste water treatment, it can wipe off phosphorus, lead and hexavalent chromium. Invalided zeolite can be also used concentrated brine counter-current.
Natural clinoptilolite filter's chemical and physical index:
Proportion(g/cm3)
2.2-2.6
Silt Content%
≤1.0
Volumeweight(g/cm3)
1.6
Moisture%
≤1.5
Ware Rate%
<1.0
Sodium ion Exchange Ability
≥800
2. Activation zeolite filter Activation zeolite filter
is made by the natural zeolite after special activation.
The adsorption ability and the ion exchange capacity is better than the natural zeolite.
It is not only dislodge turbidity, chroma and peculiar smell, but also can adsorb harmful metals in the water(chrome, cadmium, nickel, zinc, mercury, iron ions) and organic in the water(phenol, phosphate radical ion). This product is conductive to dislodge various micro pollutants and has no harmful substances.
Therefore, activation zeolite filter is the ideal material for industrial water, waste water treatment and tap water filtration.
Performance Analysis:
Density g/cm3
1.8-2.2
Filtering Velocity m/h
4-12
Volumeweight g/cm3
1.4
Wear Rate%
<0.5
Pore Ratio%
≥50
Broken Rate%
<1.0
Specific Surface Area m2/g
500-800
Silt Content%
<1.0
Hydrochloric Acid Solute Rate%
≤0.1
All Exchange Work Capacity mg/g
2.2-2.5
30% Chemical Product PAC
Chemical Product
1,water purification effect is obvious
2,flock speed is quick
3,a new type flocculant
Chemical Product PAC 30%
is based on polyaluminium chloride, ferric oxide, aluminium salt and malysite after coagulation treatment.
It combines the advantages of aluminium salt and malysite, for the aluminium ion and iron ion's form improving remarkably.
Liquid type:
It is the brown or brick red transparent body and deposit- free.
Solid type:
It is sepia or brick red powder and crystal grain, easily soluble in water.
Application
Poly Aluminium Chloride(PAC) can be used in the clarification of drinking water, polluted industrial wastewater and industrial sewege.
Usage
1. Solid PAC should be used after being dissolved in water and the dilution ratio is generally 2%-20%( weight percentage )
2. The dosage is generally 1-15g per ton. Meanwhile, the specific dosage should be subject to users' actual experiment considering the specific water quality and turbidity.
Cautions
1. It cannot be stored together with other chemical reagents.
2. The storage period of solid PAC should be 2 years while being stored in ventilated and dry place. The performance will not change even through being damped.
Key technical indexes:
Item
Polyaluminium Chloride
Liquid Type
Solid Type
Relative Density(20°C)
1.19
PH Value(1%aqueous solution)
3.5-4.5
3.5-4.5
Al2O3 Content
10.0
29
Ferric Oxide Content
1-2
2-3
Basicity %
60-95
60-95
Water Insoluble Content %
<0.3
<0.1
As %
<0.0003
<0.0006
Mn %
≤0.045
≤0.01
Pb %
≤0.001
≤0.003
Hg %
≤0.00002
≤0.00006
SO4 %
3.5-9.6
3.5-10.0
1,water purification effect is obvious
2,flock speed is quick
3,a new type flocculant
Chemical Product PAC 30%
is based on polyaluminium chloride, ferric oxide, aluminium salt and malysite after coagulation treatment.
It combines the advantages of aluminium salt and malysite, for the aluminium ion and iron ion's form improving remarkably.
Liquid type:
It is the brown or brick red transparent body and deposit- free.
Solid type:
It is sepia or brick red powder and crystal grain, easily soluble in water.
Application
Poly Aluminium Chloride(PAC) can be used in the clarification of drinking water, polluted industrial wastewater and industrial sewege.
Usage
1. Solid PAC should be used after being dissolved in water and the dilution ratio is generally 2%-20%( weight percentage )
2. The dosage is generally 1-15g per ton. Meanwhile, the specific dosage should be subject to users' actual experiment considering the specific water quality and turbidity.
Cautions
1. It cannot be stored together with other chemical reagents.
2. The storage period of solid PAC should be 2 years while being stored in ventilated and dry place. The performance will not change even through being damped.
Key technical indexes:
Item
Polyaluminium Chloride
Liquid Type
Solid Type
Relative Density(20°C)
1.19
PH Value(1%aqueous solution)
3.5-4.5
3.5-4.5
Al2O3 Content
10.0
29
Ferric Oxide Content
1-2
2-3
Basicity %
60-95
60-95
Water Insoluble Content %
<0.3
<0.1
As %
<0.0003
<0.0006
Mn %
≤0.045
≤0.01
Pb %
≤0.001
≤0.003
Hg %
≤0.00002
≤0.00006
SO4 %
3.5-9.6
3.5-10.0
Enviromental Protection Grade Zeolite
Zeolite
1.ISO9001
2.High exchange capacity
3.Strong adsorption
4.Lower cost&better service
Zeolite
Instruction:
prevent molecular sieve from exposing directly to the air.
Waring:
molecular sieve adsorption activity is an exothermic reaction,any contact to human body is dangerous.
1. Natural clinoptilolite filter Natural zeolite
is aluminosilicate, the appearance is white or bolarious.
It belongs to weakly acidic cationic exchange agent. After add the activated component, make it has better ion exchange or adsorption ability, and the adsorption energy also increase accordingly.
This kind of filter is mainly used for small boiler water conditioning, removing the calcium,magnesium ions in the water, in order to reduce the boiler scale formation and less the corrosion, at the same prolong the service life of the boiler.
In the waste water treatment, it can wipe off phosphorus, lead and hexavalent chromium. Invalided zeolite can be also used concentrated brine counter-current.
Natural clinoptilolite filter's chemical and physical index:
Proportion(g/cm3)
2.2-2.6
Silt Content%
≤1.0
Volumeweight(g/cm3)
1.6
Moisture%
≤1.5
Ware Rate%
<1.0
Sodium ion Exchange Ability
≥800
2. Activation zeolite filter Activation zeolite filter
is made by the natural zeolite after special activation.
The adsorption ability and the ion exchange capacity is better than the natural zeolite.
It is not only dislodge turbidity, chroma and peculiar smell, but also can adsorb harmful metals in the water(chrome, cadmium, nickel, zinc, mercury, iron ions) and organic in the water(phenol, phosphate radical ion). This product is conductive to dislodge various micro pollutants and has no harmful substances.
Therefore, activation zeolite filter is the ideal material for industrial water, waste water treatment and tap water filtration.
Performance Analysis:
Density g/cm3
1.8-2.2
Filtering Velocity m/h
4-12
Volumeweight g/cm3
1.4
Wear Rate%
<0.5
Pore Ratio%
≥50
Broken Rate%
<1.0
Specific Surface Area m2/g
500-800
Silt Content%
<1.0
Hydrochloric Acid Solute Rate%
≤0.1
All Exchange Work Capacity mg/g
2.2-2.5
1.ISO9001
2.High exchange capacity
3.Strong adsorption
4.Lower cost&better service
Zeolite
Instruction:
prevent molecular sieve from exposing directly to the air.
Waring:
molecular sieve adsorption activity is an exothermic reaction,any contact to human body is dangerous.
1. Natural clinoptilolite filter Natural zeolite
is aluminosilicate, the appearance is white or bolarious.
It belongs to weakly acidic cationic exchange agent. After add the activated component, make it has better ion exchange or adsorption ability, and the adsorption energy also increase accordingly.
This kind of filter is mainly used for small boiler water conditioning, removing the calcium,magnesium ions in the water, in order to reduce the boiler scale formation and less the corrosion, at the same prolong the service life of the boiler.
In the waste water treatment, it can wipe off phosphorus, lead and hexavalent chromium. Invalided zeolite can be also used concentrated brine counter-current.
Natural clinoptilolite filter's chemical and physical index:
Proportion(g/cm3)
2.2-2.6
Silt Content%
≤1.0
Volumeweight(g/cm3)
1.6
Moisture%
≤1.5
Ware Rate%
<1.0
Sodium ion Exchange Ability
≥800
2. Activation zeolite filter Activation zeolite filter
is made by the natural zeolite after special activation.
The adsorption ability and the ion exchange capacity is better than the natural zeolite.
It is not only dislodge turbidity, chroma and peculiar smell, but also can adsorb harmful metals in the water(chrome, cadmium, nickel, zinc, mercury, iron ions) and organic in the water(phenol, phosphate radical ion). This product is conductive to dislodge various micro pollutants and has no harmful substances.
Therefore, activation zeolite filter is the ideal material for industrial water, waste water treatment and tap water filtration.
Performance Analysis:
Density g/cm3
1.8-2.2
Filtering Velocity m/h
4-12
Volumeweight g/cm3
1.4
Wear Rate%
<0.5
Pore Ratio%
≥50
Broken Rate%
<1.0
Specific Surface Area m2/g
500-800
Silt Content%
<1.0
Hydrochloric Acid Solute Rate%
≤0.1
All Exchange Work Capacity mg/g
2.2-2.5
Enviromental Protection PAC Water Treatment Chemical
Water Treatment Chemical
1.ideal flocculant
2.widely used in demostic water
3.high adsorption precision
4.reusable PAC
Water Treatment
Chmical
Function
1.Mainly used as ideal flocculant for drinking water treatment, and tap water and sewage.PAC
2.High flocking & adsorption precision.PAC
3.Ideal flocculant for water treatment.PAC
4.Low cost & economical water filters. PAC
Specification
Names
Products degree
Drinking water
(1st class)Value
Non-drinking water
(2nd class)Value
AL2O3
Min 29-32
Min 29-30
Basicity%
50-85
60-85
PH
3.5-5
3.5-5
Water-insoluble
substances
Max 0.5-1.5
Max 1.5-3
Pb
PPm Max 3.0
As
PPm Max 0.5
Fe
PPm Max 0.3
Hg
PPm Max 0.2
The Specific Dosage Quantity of the Flocculant:
Turbidity before treatment
30-100
100-250
250-400
400-1000
1000-
5000
7500
Dosage (1mg/L)
2.51
3.44
4.45
6.13
12.47
19.9
Turbidity after treatment
3
3
5
5
6
8
1.ideal flocculant
2.widely used in demostic water
3.high adsorption precision
4.reusable PAC
Water Treatment
Chmical
Function
1.Mainly used as ideal flocculant for drinking water treatment, and tap water and sewage.PAC
2.High flocking & adsorption precision.PAC
3.Ideal flocculant for water treatment.PAC
4.Low cost & economical water filters. PAC
Specification
Names
Products degree
Drinking water
(1st class)Value
Non-drinking water
(2nd class)Value
AL2O3
Min 29-32
Min 29-30
Basicity%
50-85
60-85
PH
3.5-5
3.5-5
Water-insoluble
substances
Max 0.5-1.5
Max 1.5-3
Pb
PPm Max 3.0
As
PPm Max 0.5
Fe
PPm Max 0.3
Hg
PPm Max 0.2
The Specific Dosage Quantity of the Flocculant:
Turbidity before treatment
30-100
100-250
250-400
400-1000
1000-
5000
7500
Dosage (1mg/L)
2.51
3.44
4.45
6.13
12.47
19.9
Turbidity after treatment
3
3
5
5
6
8
Enviromental Protection PAM In Domestic Printing
PAC
a.)Good for water treatment
b)Very useful in paper making
c) Industrial treatment and recycling.
PAC
Main Application
Mine Washing:
The product can be used in coal washing tailing centrifugal separation, can be used in sedimentation and filtration of coal powder and coal mud, and can improve the recovery rate of coal powder and the filtration speed.
Textile Auxiliary Agent:
The product can be added with some other chemicals to prepare chemical grout, is used to starch textiles, can improve the adhesive property, penetrability and desizing performance, enables the textile to have electrostatic prevention performance, reduces the desizing rate, and reduces the starch mixing spots, cloth machine breaking efficiency, and falling objects.
Sewage Water Treatment:
When sewage water systems are acidophilic, it is more suitable to select nonionic-polyacrylamide, the product can be matched with flocculating agent PAC, aluminium sulphate and the like, and it has the best effect in water treatment.
Metallurgical Mineral Dressing
:
It can be used in floatation and smelting of Zinc, manganese and copper mines, its leachate and slag can be added into PAM to improve the separation efficiency.
Sand Prevention and Solidification:
The nonionic-polyacrylamide is dissolved into 0.3% concentration, cross-linking agent is added, and the product can be sprayed on desert to prevent and solidify
Cautions:
1) Dissolution operation shall be done in plastic, porcelain and stainless steel agitator tanks and far away from irons
2) It is required to place in cool dry rooms(below 35 celsius degree),and prevent high temperature and sunshine in transportation and storage.
a.)Good for water treatment
b)Very useful in paper making
c) Industrial treatment and recycling.
PAC
Main Application
Mine Washing:
The product can be used in coal washing tailing centrifugal separation, can be used in sedimentation and filtration of coal powder and coal mud, and can improve the recovery rate of coal powder and the filtration speed.
Textile Auxiliary Agent:
The product can be added with some other chemicals to prepare chemical grout, is used to starch textiles, can improve the adhesive property, penetrability and desizing performance, enables the textile to have electrostatic prevention performance, reduces the desizing rate, and reduces the starch mixing spots, cloth machine breaking efficiency, and falling objects.
Sewage Water Treatment:
When sewage water systems are acidophilic, it is more suitable to select nonionic-polyacrylamide, the product can be matched with flocculating agent PAC, aluminium sulphate and the like, and it has the best effect in water treatment.
Metallurgical Mineral Dressing
:
It can be used in floatation and smelting of Zinc, manganese and copper mines, its leachate and slag can be added into PAM to improve the separation efficiency.
Sand Prevention and Solidification:
The nonionic-polyacrylamide is dissolved into 0.3% concentration, cross-linking agent is added, and the product can be sprayed on desert to prevent and solidify
Cautions:
1) Dissolution operation shall be done in plastic, porcelain and stainless steel agitator tanks and far away from irons
2) It is required to place in cool dry rooms(below 35 celsius degree),and prevent high temperature and sunshine in transportation and storage.
Enviromental Protection Standard Alumina Ball for Water Treatment
Alumina Ball
a).white globular porosity particles with symmetrical particle size
b).non-poisonous, no smell
c).strong ability
Alumina Ball
(1). The products are white globular porosity particles with symmetrical particle size.
(2). They will remain original shape when absorbing water and they are non-poisonous, no smell, odorless and insoluble to water and organic solvents.
(3). In certain operating conditions, its dry-depth reaches below 70 degrees of dew-point temperature.
(4). applications:
a. It can be used as deacidificated regenerant of transformer oil and gas drying of oxygen industry, textile Industry and electronic industry, and air drying of automatic instrument and meter.
b. It is also used as drying agent and cleaning agent in fertilizer and petrochemical industry (dew point reaches-40 degrees) and dew point reaches -55 degrees of pressure swing adsorption of space division industry.
In one word, it is an efficient drying agent of deep drying in trace water.
Specific indexes as follows:
Serial number
Index projects
Index requirement
1
Appearance
White
2
Particle size (mm)
1.5-2.4 3-5 5-8
3
Intensity (N/ , average value)
Min150
4
Bulk specific weight (g/cm
3
)
0.7-0.8
5
Pore volume (cm
3
/g)
min0.38
6
Wear rate (%)
max0.6
7
Specific surface area (m
2
/g)
min300
8
Sodium oxide content (Na
2
O, %)
max1.0
9
Water absorption rate (%)
min50
10
Alumina content (AL
2
O
3
)
min92
11
Static adsorption capacity % (RH=60)
min16.8
a).white globular porosity particles with symmetrical particle size
b).non-poisonous, no smell
c).strong ability
Alumina Ball
(1). The products are white globular porosity particles with symmetrical particle size.
(2). They will remain original shape when absorbing water and they are non-poisonous, no smell, odorless and insoluble to water and organic solvents.
(3). In certain operating conditions, its dry-depth reaches below 70 degrees of dew-point temperature.
(4). applications:
a. It can be used as deacidificated regenerant of transformer oil and gas drying of oxygen industry, textile Industry and electronic industry, and air drying of automatic instrument and meter.
b. It is also used as drying agent and cleaning agent in fertilizer and petrochemical industry (dew point reaches-40 degrees) and dew point reaches -55 degrees of pressure swing adsorption of space division industry.
In one word, it is an efficient drying agent of deep drying in trace water.
Specific indexes as follows:
Serial number
Index projects
Index requirement
1
Appearance
White
2
Particle size (mm)
1.5-2.4 3-5 5-8
3
Intensity (N/ , average value)
Min150
4
Bulk specific weight (g/cm
3
)
0.7-0.8
5
Pore volume (cm
3
/g)
min0.38
6
Wear rate (%)
max0.6
7
Specific surface area (m
2
/g)
min300
8
Sodium oxide content (Na
2
O, %)
max1.0
9
Water absorption rate (%)
min50
10
Alumina content (AL
2
O
3
)
min92
11
Static adsorption capacity % (RH=60)
min16.8
Environmental friendly plasticizer
Environmental friendly plasticizer form of ATBC named DEDB used in PVC,food packaging,children's toys,medical products,rubbers.
Environmental friendly plasticizer form of ATBC named DEDB(Diethylene Glycol Dibenzoate) is extensively applied by most plasticizing products.
Molecular formula:C18H18O5 Molecular weight:314
It can replace the dioctyl phthalate and dibutyl ester. Its features include light color, good plasticized capacity, good compatibility , low release, good heat stability, good resistance to freeze , extraction, UV ray, oxidization and volatilization and good electrical performance. It is the cheapest new plasticizer in China, can reduce lots of cost.
Technique data:
Appearance
Light yellow transparent oily liquid
Ester content
≥99.0
acid number(KOH meq/g)
≤ 0.3
Flash point °C
≥ 200
Loss on heat(125°C,3hours)
≤0.7
specific weight of range D
1.165~1.175
Toxicity
Toxicity is lower than the DOP, DBP,it belong to a low toxicity environmental products.
Packing
Plastic or Metal pail net.225kg
Shipment terms
Within 15days after the T/T confirmed or receipt of L/C
Loading Quantity
18MT / 20’FCL
Use: As Environmental friendly plasticizer used in PVC,food packaging,children's toys,medical products,rubbers etc.
Environmental friendly plasticizer form of ATBC named DEDB(Diethylene Glycol Dibenzoate) is extensively applied by most plasticizing products.
Molecular formula:C18H18O5 Molecular weight:314
It can replace the dioctyl phthalate and dibutyl ester. Its features include light color, good plasticized capacity, good compatibility , low release, good heat stability, good resistance to freeze , extraction, UV ray, oxidization and volatilization and good electrical performance. It is the cheapest new plasticizer in China, can reduce lots of cost.
Technique data:
Appearance
Light yellow transparent oily liquid
Ester content
≥99.0
acid number(KOH meq/g)
≤ 0.3
Flash point °C
≥ 200
Loss on heat(125°C,3hours)
≤0.7
specific weight of range D
1.165~1.175
Toxicity
Toxicity is lower than the DOP, DBP,it belong to a low toxicity environmental products.
Packing
Plastic or Metal pail net.225kg
Shipment terms
Within 15days after the T/T confirmed or receipt of L/C
Loading Quantity
18MT / 20’FCL
Use: As Environmental friendly plasticizer used in PVC,food packaging,children's toys,medical products,rubbers etc.
Epoxidized soybean oil
Epoxidized soybean oil
1,Molecular : C57H106O10
2,Appearance:colourless or yellowish oily liquid
Epoxidized soybean oil
Molecular : C57H106O10
Molecular Weight:Average molecular weight is about 950.
Appearance: colourless or yellowish oily liquid
Package:200kg/metal drum.
conservation :It will be conserved more than two years under normal storage conditions
UsageThe product is the plasticizer as well as stabilizer of polyvinyl chloride. Having low volatile properties, and good thermal stability, light stability, water resistance and oil resistance, the product can endow plastic products with good mechanical strength, weatherability and electric performance. The product can be used with polyester class plasticizer for reducing polyester migration. The combined use of the product with heat stabilizer can produce obvious synergistic effect.
The product is basically used for polyvinyl chloride products, such as PVC granules, food packaging containers, plastic medical products, plastic films, artificial leather, toys, cable and wire materials, etc. The product can ensure that made products are harmless and transparent, and the service life of the made products can be prolonged.
Technical Indexes
First grade
Qualified
Luster(pt-Co)≤
150
200
Acid Value mgKOH/g≤
0.50
0.60
Flash point(opening) °C≥
280
270
iodine Value %≥
6.0
8.0
Epoxy Value %≥
6.0
5.5
Density (p20°C)g/cm|3
0.985-0.995
Weight Loss After Heating % ≤
0.30
0.50
thermal stability(177°CX3 hours)
95%
90%
1,Molecular : C57H106O10
2,Appearance:colourless or yellowish oily liquid
Epoxidized soybean oil
Molecular : C57H106O10
Molecular Weight:Average molecular weight is about 950.
Appearance: colourless or yellowish oily liquid
Package:200kg/metal drum.
conservation :It will be conserved more than two years under normal storage conditions
UsageThe product is the plasticizer as well as stabilizer of polyvinyl chloride. Having low volatile properties, and good thermal stability, light stability, water resistance and oil resistance, the product can endow plastic products with good mechanical strength, weatherability and electric performance. The product can be used with polyester class plasticizer for reducing polyester migration. The combined use of the product with heat stabilizer can produce obvious synergistic effect.
The product is basically used for polyvinyl chloride products, such as PVC granules, food packaging containers, plastic medical products, plastic films, artificial leather, toys, cable and wire materials, etc. The product can ensure that made products are harmless and transparent, and the service life of the made products can be prolonged.
Technical Indexes
First grade
Qualified
Luster(pt-Co)≤
150
200
Acid Value mgKOH/g≤
0.50
0.60
Flash point(opening) °C≥
280
270
iodine Value %≥
6.0
8.0
Epoxy Value %≥
6.0
5.5
Density (p20°C)g/cm|3
0.985-0.995
Weight Loss After Heating % ≤
0.30
0.50
thermal stability(177°CX3 hours)
95%
90%
Ethanol Dehydration Molecular Sieve 3A
1.Ethanol Dehydration
2. Pass ISO
3.High quality
4.Competitive price
Ethanol Dehydration
Properties
Beads
Items
Unit
4×8 Mesh
Diameter
mm
3.0-5.0
Bulk Density
g/mL
≥0.68
Crush Strength
N
≥80
Static Water Adsorption
wt%
≥21.0
Attrition
wt%
≤0.1
Moisture Content
wt%
≤1.5
If interested, pls feel free to let me know: zzl at hyms.com.cn / lindazhan at ymail.com
2. Pass ISO
3.High quality
4.Competitive price
Ethanol Dehydration
Properties
Beads
Items
Unit
4×8 Mesh
Diameter
mm
3.0-5.0
Bulk Density
g/mL
≥0.68
Crush Strength
N
≥80
Static Water Adsorption
wt%
≥21.0
Attrition
wt%
≤0.1
Moisture Content
wt%
≤1.5
If interested, pls feel free to let me know: zzl at hyms.com.cn / lindazhan at ymail.com
Ethanol Drying Molecular Sieve 3A
Professional manufacturer for all kinds of molecular sieves;
Use for dehydration of ethanol, ethylene and propylene
The molecular sieve products are produced to meet the requirements of ISO9001:2000. We guarantee the quality and consistency of our molecular sieve products.
The production capacity is 20,000 tons per year. The main types of our molecular sieves are 3A, 4A, 5A, 13X, 13X APG, Special 4A (for automobiles), XH (for regrigerant), and I. G. Desiccant (for insulating glass).
Technical Data (3a )
Capability
Unit
Technical Data
Shape
Pellet
Elongate
Diameter
mm
1.7-2.5
3.0-5.0
1.5-1.7
3.0-3.3
Granularity
%
≥96
≥96
≥98
≥98
Bulk density
g/ml
≥0.6
≥0.60
≥0.60
≥0.60
Abrasion
%
≤0.2
≤0.20
≤0.20
≤0.25
Compressive Strength
N
≥45/P
≥60/p
≥45/cm
≥60/cm
Static H
2
O Adsorption
%
≥20
≥20
≥20
≥20
Packing Water
%
≤1.5
≤1.5
≤1.5
≤1.5
Use for dehydration of ethanol, ethylene and propylene
The molecular sieve products are produced to meet the requirements of ISO9001:2000. We guarantee the quality and consistency of our molecular sieve products.
The production capacity is 20,000 tons per year. The main types of our molecular sieves are 3A, 4A, 5A, 13X, 13X APG, Special 4A (for automobiles), XH (for regrigerant), and I. G. Desiccant (for insulating glass).
Technical Data (3a )
Capability
Unit
Technical Data
Shape
Pellet
Elongate
Diameter
mm
1.7-2.5
3.0-5.0
1.5-1.7
3.0-3.3
Granularity
%
≥96
≥96
≥98
≥98
Bulk density
g/ml
≥0.6
≥0.60
≥0.60
≥0.60
Abrasion
%
≤0.2
≤0.20
≤0.20
≤0.25
Compressive Strength
N
≥45/P
≥60/p
≥45/cm
≥60/cm
Static H
2
O Adsorption
%
≥20
≥20
≥20
≥20
Packing Water
%
≤1.5
≤1.5
≤1.5
≤1.5
Ethyl silicate-28
Chemical Name : Tetraethoxysilane
CAS NO. :78-10-4
Ethyl silicate-28
Introduction
Chemical Name
:
Tetraethoxysilane
CAS NO. :78-10-4
Structural formula:
Typical Physical Properties
Determined on commercial material whose properties may vary within the specification limits.
______________________________________________________
Molecular Weight 208.33(app)
Boiling Point 168°C
Freezing Point: -82 °C
Flash point: 40.5 °C
Main technical indexes:
______________________________________________________
Appearance colorless liquid
Chroma(APHA): ≤30
Specific gravity(at 20°C): 0.934-0.936
Silicondioxide: 28.0-31.0% by wt.asSiO
2
Ethanol: 2%
Iron: ≤5PPm by wt. as FeCl
2
Viscosity(20°C): 1-3 cps.
Assay: 98.0%
Applications
1. crosslinking agent for organic silicon rubber;
2. to synthesize high-purity silica and quartz;
3. material of silica gel;
4. agglomerant for paints and coatings;
5. agglomerant for ceramic materials.
Packing and Storage
Packing
:
200kg galvanized iron drum
Storage :
preserve it by sealing it airtightly.
Storage period: 10 months
CAS NO. :78-10-4
Ethyl silicate-28
Introduction
Chemical Name
:
Tetraethoxysilane
CAS NO. :78-10-4
Structural formula:
Typical Physical Properties
Determined on commercial material whose properties may vary within the specification limits.
______________________________________________________
Molecular Weight 208.33(app)
Boiling Point 168°C
Freezing Point: -82 °C
Flash point: 40.5 °C
Main technical indexes:
______________________________________________________
Appearance colorless liquid
Chroma(APHA): ≤30
Specific gravity(at 20°C): 0.934-0.936
Silicondioxide: 28.0-31.0% by wt.asSiO
2
Ethanol: 2%
Iron: ≤5PPm by wt. as FeCl
2
Viscosity(20°C): 1-3 cps.
Assay: 98.0%
Applications
1. crosslinking agent for organic silicon rubber;
2. to synthesize high-purity silica and quartz;
3. material of silica gel;
4. agglomerant for paints and coatings;
5. agglomerant for ceramic materials.
Packing and Storage
Packing
:
200kg galvanized iron drum
Storage :
preserve it by sealing it airtightly.
Storage period: 10 months
Ethylene Diamine Tetra (Methylene Phosphonic Acid) EDTMPA (Solid)
EDTMPA has strong metal ion chelating capacity, whose chelating constant with cuprum ion is larger than that of EDTA.
Ethylene Diamine Tetra (Methylene Phosphonic Acid) EDTMPA (Solid)
CAS No.:
1429-50-1
Dequest:
2040
Molecular Formula:
C6H20 N2O12P4
Molecular weight:
436.13
Structural Formula:
Properties
EDTMPA is white crystal powder at room temperature, with melting point 215-217, hard to be dissolved in water, the solubility is less that 5% at room temperature, easy dissolved in ammonia. EDTMPA has strong metal ion chelating capacity, whose chelating constant with cuprum ion is larger than that of EDTA.
EDTMPA has high capacity for chelating metal ions. The complex constant with Cu is the largest in all chelating agents including EDTA. EDTMPA is a kind of high-pure grade reagent and innocuous, it can be used as detergent in semiconductor chip to prepare integrated circuit, as carrying agent for radioelement in medical industry, and as agent for inspection and therapy. The chelating capacity of EDTMPA largely exceed that of EDTA and DTPA, and can replace EDTA for chelating agent at almost any situation.
Specification:
items
index
Appearance
White crystal powder
Active acid %
95.0min
Total phosphonic acid(as PO4
3-
)%
82.0 min
Dryness weight loss %
2.0 max
Fe ppm
5 max
Cl %
0.1 max
pH(1% solution)
2.0 max
Our company can produce 99% (chromatograph purity) and high purity product on demand of clients.
Package and Storage:
25kg inner liner polyethylene (PE) bag, outer plastic woven bag, with agreement with export environment requirement, or confirmed by clients. Storage for one year in room shady and dry place.
Ethylene Diamine Tetra (Methylene Phosphonic Acid) EDTMPA (Solid)
CAS No.:
1429-50-1
Dequest:
2040
Molecular Formula:
C6H20 N2O12P4
Molecular weight:
436.13
Structural Formula:
Properties
EDTMPA is white crystal powder at room temperature, with melting point 215-217, hard to be dissolved in water, the solubility is less that 5% at room temperature, easy dissolved in ammonia. EDTMPA has strong metal ion chelating capacity, whose chelating constant with cuprum ion is larger than that of EDTA.
EDTMPA has high capacity for chelating metal ions. The complex constant with Cu is the largest in all chelating agents including EDTA. EDTMPA is a kind of high-pure grade reagent and innocuous, it can be used as detergent in semiconductor chip to prepare integrated circuit, as carrying agent for radioelement in medical industry, and as agent for inspection and therapy. The chelating capacity of EDTMPA largely exceed that of EDTA and DTPA, and can replace EDTA for chelating agent at almost any situation.
Specification:
items
index
Appearance
White crystal powder
Active acid %
95.0min
Total phosphonic acid(as PO4
3-
)%
82.0 min
Dryness weight loss %
2.0 max
Fe ppm
5 max
Cl %
0.1 max
pH(1% solution)
2.0 max
Our company can produce 99% (chromatograph purity) and high purity product on demand of clients.
Package and Storage:
25kg inner liner polyethylene (PE) bag, outer plastic woven bag, with agreement with export environment requirement, or confirmed by clients. Storage for one year in room shady and dry place.
30% PAC Polyaluminium Chlorid
1). Best price PAC(Polyaluminium Chloride )
2).PAC . Al2O3: 28% 30% 33%
3).PAC . GB/T ISO9001:2008 ployaluminum chloride
Best selling in Europe PAC(Polyaluminium Chloride ):
FOB Tianjin Price: USD255-350 per ton
PAC (Poly aluminium Chloride)
Features:
1) Made from pure raw material
2) Used for drinking water treatment and paper mills as retention agent
3) Appearance: solid powder, yellow, white.
4) Al
2
O
3
: 30% (min.)
5) Basicity: 50.0% ~ 85.0%
6) Insolubles: 0.5% (max.)
7) PH (1% water solution): 3.5 ~ 5.0
8) SO
4
2-
: 3.5% (max.)
9) N: 0.09% (max.)
10) As: 0.0005% max
11) Mn: 0.045% (max.)
12) Cr
6+
: 0.0015% (max.)
13) Hg: 0.00002% (max.)
14) Pb: 0.003% (max.)
15) Cd: 0.0006% (max.)
16) Fe: 0.008% (max.)
PAC (Poly aluminium Chloride)
Discription :
PAC (Poly aluminium Chloride) abbreviate to the PAC. Often referred to aluminum chlorideor or mixing mud agent, which is a water-soluble inorganic polymers between ALCL3 and AL(OH) 3, the chemical formula is [AL2 (OH) NCL6- NLm] ,'m' refer to the extent of polymerization, 'n' stand for the neutral level of PAC products.
2).PAC . Al2O3: 28% 30% 33%
3).PAC . GB/T ISO9001:2008 ployaluminum chloride
Best selling in Europe PAC(Polyaluminium Chloride ):
FOB Tianjin Price: USD255-350 per ton
PAC (Poly aluminium Chloride)
Features:
1) Made from pure raw material
2) Used for drinking water treatment and paper mills as retention agent
3) Appearance: solid powder, yellow, white.
4) Al
2
O
3
: 30% (min.)
5) Basicity: 50.0% ~ 85.0%
6) Insolubles: 0.5% (max.)
7) PH (1% water solution): 3.5 ~ 5.0
8) SO
4
2-
: 3.5% (max.)
9) N: 0.09% (max.)
10) As: 0.0005% max
11) Mn: 0.045% (max.)
12) Cr
6+
: 0.0015% (max.)
13) Hg: 0.00002% (max.)
14) Pb: 0.003% (max.)
15) Cd: 0.0006% (max.)
16) Fe: 0.008% (max.)
PAC (Poly aluminium Chloride)
Discription :
PAC (Poly aluminium Chloride) abbreviate to the PAC. Often referred to aluminum chlorideor or mixing mud agent, which is a water-soluble inorganic polymers between ALCL3 and AL(OH) 3, the chemical formula is [AL2 (OH) NCL6- NLm] ,'m' refer to the extent of polymerization, 'n' stand for the neutral level of PAC products.
Ethylene Diamine Tetra (Methylene Phosphonic Acid) Sodium (EDTMPS)
EDTMPS is nitrogenous organic polyphosphonic acid, a part of cathodic corrosion inhibitor.
2. Performance Index:
Ingredient: Maleic Anhydride-Acrylic acid copolymer
Appearance: brown yellow transparent liquid
Solid content (%):
≥
48.0
Free ion monomer (count as maleic acid)%
≤
9.0
Density (20 °C) g/cm3:
≥
1.18
PH value (1% aqueous solution): 2.0 ~ 3.0
Usage:
EDTMPS can be used as corrosion inhibitor in circulating cool water system and boiler water. It is a chelating agent in non-cyanogen electroplating industry and a water-softening agent in printing & dyeing industry. When used alone, 2~10mg/L is preferred. When built with HPMA by ratio ETDMP:HPMA=1:3, it can be used for low pressure boiler. It can also be built with BTA, PAAS and zinc salt.
Package and Storage: Normally In 250kg net Plastic Drum, IBC drum can also be used as required. Storage for ten months in room shady and dry place.
2. Performance Index:
Ingredient: Maleic Anhydride-Acrylic acid copolymer
Appearance: brown yellow transparent liquid
Solid content (%):
≥
48.0
Free ion monomer (count as maleic acid)%
≤
9.0
Density (20 °C) g/cm3:
≥
1.18
PH value (1% aqueous solution): 2.0 ~ 3.0
Usage:
EDTMPS can be used as corrosion inhibitor in circulating cool water system and boiler water. It is a chelating agent in non-cyanogen electroplating industry and a water-softening agent in printing & dyeing industry. When used alone, 2~10mg/L is preferred. When built with HPMA by ratio ETDMP:HPMA=1:3, it can be used for low pressure boiler. It can also be built with BTA, PAAS and zinc salt.
Package and Storage: Normally In 250kg net Plastic Drum, IBC drum can also be used as required. Storage for ten months in room shady and dry place.
Ethylene Diamine Tetra (Methylene Phosphonic Acid) Sodium (EDTMPS)
EDTMPS is nitrogenous organic polyphosphonic acid, a part of cathodic corrosion inhibitor
Ethylene Diamine Tetra (Methylene Phosphonic Acid) Sodium (EDTMPS)
CAS No.:
1429-50-1
Dequest:
2040
Molecular Formula:
C6H12O12N2P4Na8
Molecular weight:
612.13
Structural Formula:
Properties
EDTMPS is nitrogenous organic polyphosphonic acid, a part of cathodic corrosion inhibitor.Its corrosion inhibition is 3~5 times better than that of inorganic polyphosphate. It can be fully dissolved in water, innocuous and none pollution to environment, has good chemical stability and thermal tolerance. It shows excellent scale inhibition ability under temperature 200. It can dissociate into 8 positive-negative ions, thus can chelate with many metal ions to form polymer reticulation complex, to destroy the normal crystallization of calcium scale. EDTMPS shows better antiscale effects to calcium sulfate and barium sulfate.
Specification:
items
index
Appearance
Clear yellow to umber transparent liquid
Active component (EDTMPS)%
30.0min
Organic phosphonic acid (asPO4
3-
)%
10.0min
Phosphorous acid (as PO3
3-
)%
5.0max
Phosphoric acid (asPO4
3-
)%
1.0max
pH (1% water solution)
9.5-10.5
Density (20) g/cm
3
1.25min
Chloride (as Cl
-
)%
3.0max
Colour APHA (Hazen)
40 max
Usage:
EDTMPS can be used as corrosion inhibitor in circulating cool water system and boiler water. It is a chelating agent in non-cyanogen electroplating industry and a water-softening agent in printing & dyeing industry. When used alone, 2~10mg/L is preferred. When built with HPMA by ratio ETDMP:HPMA=1:3, it can be used for low pressure boiler. It can also be built with BTA, PAAS and zinc salt.
Package and Storage:
Normally In 250kg net Plastic Drum, IBC drum can also be used as required. Storage for ten months in room shady and dry place.
Ethylene Diamine Tetra (Methylene Phosphonic Acid) Sodium (EDTMPS)
CAS No.:
1429-50-1
Dequest:
2040
Molecular Formula:
C6H12O12N2P4Na8
Molecular weight:
612.13
Structural Formula:
Properties
EDTMPS is nitrogenous organic polyphosphonic acid, a part of cathodic corrosion inhibitor.Its corrosion inhibition is 3~5 times better than that of inorganic polyphosphate. It can be fully dissolved in water, innocuous and none pollution to environment, has good chemical stability and thermal tolerance. It shows excellent scale inhibition ability under temperature 200. It can dissociate into 8 positive-negative ions, thus can chelate with many metal ions to form polymer reticulation complex, to destroy the normal crystallization of calcium scale. EDTMPS shows better antiscale effects to calcium sulfate and barium sulfate.
Specification:
items
index
Appearance
Clear yellow to umber transparent liquid
Active component (EDTMPS)%
30.0min
Organic phosphonic acid (asPO4
3-
)%
10.0min
Phosphorous acid (as PO3
3-
)%
5.0max
Phosphoric acid (asPO4
3-
)%
1.0max
pH (1% water solution)
9.5-10.5
Density (20) g/cm
3
1.25min
Chloride (as Cl
-
)%
3.0max
Colour APHA (Hazen)
40 max
Usage:
EDTMPS can be used as corrosion inhibitor in circulating cool water system and boiler water. It is a chelating agent in non-cyanogen electroplating industry and a water-softening agent in printing & dyeing industry. When used alone, 2~10mg/L is preferred. When built with HPMA by ratio ETDMP:HPMA=1:3, it can be used for low pressure boiler. It can also be built with BTA, PAAS and zinc salt.
Package and Storage:
Normally In 250kg net Plastic Drum, IBC drum can also be used as required. Storage for ten months in room shady and dry place.
Friday, September 16, 2011
Excellent Cation polyacrylamide(CPAM)>89%
1.Good water solubility
2.Lon degree:20%~80%
3.Molecular weight(million):3~20
4.Foe waste water treatment
Cation polyacrylamide(PAM)
Description:
It is the white powder with the molecular weight from 3,000,000 to 20,000,000. The CPAM with the lon degree from 20% to 80% has good water solubility, and it can be dissolved in the water by the arbitrary proportion but not the organic solvent. Besides, it has the characteristics of high-polymer electrolyte, and it can be applied in the treatment of waste water rich in organics with negative charge.
Applications
:
1. It is mainly used for sludge dewatering, beneficiation, coal washing and separation of solid and liquid.
2. It can be used for disposal of industrial sewage and daily waste water.
3. It is excellent for paper making and oil field development
Specification:
Technology index
BYH-1
BYH-2
BYH-3
BYH-4
Appearance
White particle Powder
Granularity
≤5%
≤5%
≤5%
≤5%
Solid content(%)
≥89
≥89
≥89
≥89
Dgree of Hydrolysis(%)
10-15
23-30
25-35
≥35
Molecular weight
(10 thousand)
300-2000
300-2000
300-2500
2000-2500
Solutionrate(hr)
≤1
≤0.5
≤2
≤2
NOTE:
The above technical indicators are just for your reference,we can manufacture according to your require.
About us :
Our company is well-known as a reliable manufacture, mainly producing water treatment
materials, such as Polyaluminium Chloride (PAC),PAM including
(Anionic Polyacrylamide)APAM and CPAM (Cationic Polyacrylamide), and activated carbon series ,i.e.
Coconut shell activated carbon, nut shell activated carbon, coal columnar
activated and powder activated carbon .
We can assure that we provide best products, reasonable price and perfect
service,we hope to establish a long cooperation relationship with you .
Thanks for your attention!
2.Lon degree:20%~80%
3.Molecular weight(million):3~20
4.Foe waste water treatment
Cation polyacrylamide(PAM)
Description:
It is the white powder with the molecular weight from 3,000,000 to 20,000,000. The CPAM with the lon degree from 20% to 80% has good water solubility, and it can be dissolved in the water by the arbitrary proportion but not the organic solvent. Besides, it has the characteristics of high-polymer electrolyte, and it can be applied in the treatment of waste water rich in organics with negative charge.
Applications
:
1. It is mainly used for sludge dewatering, beneficiation, coal washing and separation of solid and liquid.
2. It can be used for disposal of industrial sewage and daily waste water.
3. It is excellent for paper making and oil field development
Specification:
Technology index
BYH-1
BYH-2
BYH-3
BYH-4
Appearance
White particle Powder
Granularity
≤5%
≤5%
≤5%
≤5%
Solid content(%)
≥89
≥89
≥89
≥89
Dgree of Hydrolysis(%)
10-15
23-30
25-35
≥35
Molecular weight
(10 thousand)
300-2000
300-2000
300-2500
2000-2500
Solutionrate(hr)
≤1
≤0.5
≤2
≤2
NOTE:
The above technical indicators are just for your reference,we can manufacture according to your require.
About us :
Our company is well-known as a reliable manufacture, mainly producing water treatment
materials, such as Polyaluminium Chloride (PAC),PAM including
(Anionic Polyacrylamide)APAM and CPAM (Cationic Polyacrylamide), and activated carbon series ,i.e.
Coconut shell activated carbon, nut shell activated carbon, coal columnar
activated and powder activated carbon .
We can assure that we provide best products, reasonable price and perfect
service,we hope to establish a long cooperation relationship with you .
Thanks for your attention!
Excellent Chemical Material PAC
Polyaluminum Chloride PAC
1.white or yellow solid powder
2. There is a strong adsorption
3. Purifying effect is obvious
Polyaluminum Chloride PAC
Usage :
1. The solid product dissolved in water at 1:3, after it becomes the liquid,
Together with 10-30 times the concentration of water used after dilution to the required
2. The amount of raw water according to the different turbidity...
the general turbidity of the water in the 100-500mg / L, each dosage tons 10-20kg.
packing :inner layer of plastic bag ,outer layer of plastic film woven bag
Major specifications:
Names
Products degree
Drinking water
(1st class)
Non-drinking water
(2nd class)
AL2O3
Min 29-32
Min 29-30
Basicity%
50-85
60-85
PH
3.5-5
3.5-5
Water-insoluble
substances
Max 0.5-1.5
Max 1.5-3
Pb
PPm Max 3.0
00As
PPm Max 0.5
Fe
PPm Max 0.3
Hg
PPm Max 0.2
The specific dosage quantity of the flocculants:
Turbidity before treatment
30-100
100-250
250-400
400-1000
1000-5000
7500
Dosage (1mg/L)
2.51
3.44
4.45
6.13
12.47
19.9
Turbidity after treatment
3
3
5
5
6
8
1.white or yellow solid powder
2. There is a strong adsorption
3. Purifying effect is obvious
Polyaluminum Chloride PAC
Usage :
1. The solid product dissolved in water at 1:3, after it becomes the liquid,
Together with 10-30 times the concentration of water used after dilution to the required
2. The amount of raw water according to the different turbidity...
the general turbidity of the water in the 100-500mg / L, each dosage tons 10-20kg.
packing :inner layer of plastic bag ,outer layer of plastic film woven bag
Major specifications:
Names
Products degree
Drinking water
(1st class)
Non-drinking water
(2nd class)
AL2O3
Min 29-32
Min 29-30
Basicity%
50-85
60-85
PH
3.5-5
3.5-5
Water-insoluble
substances
Max 0.5-1.5
Max 1.5-3
Pb
PPm Max 3.0
00As
PPm Max 0.5
Fe
PPm Max 0.3
Hg
PPm Max 0.2
The specific dosage quantity of the flocculants:
Turbidity before treatment
30-100
100-250
250-400
400-1000
1000-5000
7500
Dosage (1mg/L)
2.51
3.44
4.45
6.13
12.47
19.9
Turbidity after treatment
3
3
5
5
6
8
Excellent Polyacrylamide @PAM for Water Treatment
Polyacrylamide PAM
1.Chemical mudding agent
2.Strong adsorption ability
3.High molecular weight
4.Good Reputation
Polyacrylamide PAM
Application:
1. Mainly used as flocculants: The product is widely used in chemical industry wastewater, wastewater treatment, municipal wastewater treatment.
2. For the oil industry, oil, drilling mud, waste mud treatment, prevents water channeling,
reducing friction and enhancing oil recovery is widely used.
Anionic polyacrylamide specifications:
Item
C1610
C1620
C1635
C1650
Ion content
Low
Middle
Middle
High
Molecular weight(per 10 thousand)
1000-1200
1000-1200
800-1000
800-1000
Solid content
Min 90%
Min 90%
Min 90%
Min 90%
Free monomer
Max 0.05%
Max 0.05%
Max 0.05%
Max0.05%
Dissolution time
Max 40
Max 40
Max 40
Max 40
Cationic polyacrylamide specifications:
Item
Data
Molecular weight (per 10 thousand)
800-1000
1000-1200
1300-1500
1600-2000
Ion content
25-45
45-55
55-60
65-75
Solid content
88±2%
88±2%
88±2%
88±2%
Hydrolysis degree
20-30
20-30
20-30
20-30
Residual monomer
Max 0.05%
Max 0.05%
Max 0.05%
Max 0.05%
Dissolution time
Max 2h
Max 2h
Max 2h
Max 2h
Appearance
White granules
1.Chemical mudding agent
2.Strong adsorption ability
3.High molecular weight
4.Good Reputation
Polyacrylamide PAM
Application:
1. Mainly used as flocculants: The product is widely used in chemical industry wastewater, wastewater treatment, municipal wastewater treatment.
2. For the oil industry, oil, drilling mud, waste mud treatment, prevents water channeling,
reducing friction and enhancing oil recovery is widely used.
Anionic polyacrylamide specifications:
Item
C1610
C1620
C1635
C1650
Ion content
Low
Middle
Middle
High
Molecular weight(per 10 thousand)
1000-1200
1000-1200
800-1000
800-1000
Solid content
Min 90%
Min 90%
Min 90%
Min 90%
Free monomer
Max 0.05%
Max 0.05%
Max 0.05%
Max0.05%
Dissolution time
Max 40
Max 40
Max 40
Max 40
Cationic polyacrylamide specifications:
Item
Data
Molecular weight (per 10 thousand)
800-1000
1000-1200
1300-1500
1600-2000
Ion content
25-45
45-55
55-60
65-75
Solid content
88±2%
88±2%
88±2%
88±2%
Hydrolysis degree
20-30
20-30
20-30
20-30
Residual monomer
Max 0.05%
Max 0.05%
Max 0.05%
Max 0.05%
Dissolution time
Max 2h
Max 2h
Max 2h
Max 2h
Appearance
White granules
Excellent Product Polyaluminium Chloride PAC
Polyaluminium Chloride
1.Fast flocculent setting speed
2.Wide scope to PH value
3.Obvious water purification effect
Polyaluminium Chloride
Application:
PAC is mainly used as the flocculant agent for the treatment of drinking water
and industrial wastewater (such as printing and dyeing water and pulping wastewater).
It also widely applies to precise casting, paper-making, tanning and other industries.
Main technical index:
Index name
Product grade
Drinking water
Non-drinking water
Al2O3
Min 29-32
Min 29-30
Basicity %
50-85
60-85
PH value
3.5-5
3.5-5
Content of water insoluble
Max 0.5-1.5
Max 1.5-3
Pb
PPm max 3.0
As
PPm max 0.5
Fe
PPm max 0.3
Hg
PPm max 0.2
Outstanding features:
Fast flocculent setting speed
Wide scope to PH value
Obvious water purification effect
1.Fast flocculent setting speed
2.Wide scope to PH value
3.Obvious water purification effect
Polyaluminium Chloride
Application:
PAC is mainly used as the flocculant agent for the treatment of drinking water
and industrial wastewater (such as printing and dyeing water and pulping wastewater).
It also widely applies to precise casting, paper-making, tanning and other industries.
Main technical index:
Index name
Product grade
Drinking water
Non-drinking water
Al2O3
Min 29-32
Min 29-30
Basicity %
50-85
60-85
PH value
3.5-5
3.5-5
Content of water insoluble
Max 0.5-1.5
Max 1.5-3
Pb
PPm max 3.0
As
PPm max 0.5
Fe
PPm max 0.3
Hg
PPm max 0.2
Outstanding features:
Fast flocculent setting speed
Wide scope to PH value
Obvious water purification effect
Excellent adsorption wood based powder activated carbon for sewage treatment
Wood based powder activated carbon for sewage treatment:
Low ash and 100%purity
Iodine: 500-1000mg/g
Certificate:ISO9001:2008
Excellent adsorption wood based activated carbon for water treatment: sewage water treatment, welcome to eastern dragon activated carbon factory and choose the wood based activated carbon with powder type for this application due to its special performance!
specification:
Decolourization of methylene blue (ml/g) >15
Iodine (mg/g): >1000
PH level %): 9-11
Dry reduction (%) : <10
Ferric salt (%): <0.1
Ignition residue (%): <6
Chloride (%) <0.5
Conductivity (hs/cm): <900
Phenol (%): <25
ABS (%): <50
Arsenic (wtppm) :< 1
Zinc (wtppm): < 30
Plumbun (wtppm): < 10
Cadmiun (wtppm) < 1
Low ash and 100%purity
Iodine: 500-1000mg/g
Certificate:ISO9001:2008
Excellent adsorption wood based activated carbon for water treatment: sewage water treatment, welcome to eastern dragon activated carbon factory and choose the wood based activated carbon with powder type for this application due to its special performance!
specification:
Decolourization of methylene blue (ml/g) >15
Iodine (mg/g): >1000
PH level %): 9-11
Dry reduction (%) : <10
Ferric salt (%): <0.1
Ignition residue (%): <6
Chloride (%) <0.5
Conductivity (hs/cm): <900
Phenol (%): <25
ABS (%): <50
Arsenic (wtppm) :< 1
Zinc (wtppm): < 30
Plumbun (wtppm): < 10
Cadmiun (wtppm) < 1
Excellent manufacturer Shengquan Polyacrylamide
1.Easy to dissolve
2.High efficiency
3.Best Price and first quality
4.Large quantity discount
Performance Indicators of Nonionic-polyacrylamide: (Enterprise Standard: Q/AJC002-2006)
Trademark
Molecular Weight (million)
Degree of Hydrolysis
Solid Content%
Effective PH Range
Residual Monomer Content%
whn-1
5-8 (adjustable)
<=5
>=90%
1-8
<=0.05
whn-2
8-10 (adjustable)
whn-3
10-12 (adjustable)
whn-4
12-15 (adjustable)
Main Application
Mine Washing: The product can be used in coal washing tailing centrifugal separation, can be used in sedimentation and filtration of coal powder and coal mud, and can improve the recovery rate of coal powder and the filtration speed.
Textile Auxiliary Agent:The product can be added with some other chemicals to prepare chemical grout, is used to starch textiles, can improve the adhesive property, penetrability and desizing performance, enables the textile to have electrostatic prevention performance, reduces the desizing rate, and reduces the starch mixing spots, cloth machine breaking efficiency, and falling objects.
Sewage Water Treatment:When sewage water systems are acidophilic, it is more suitable to select nonionic-polyacrylamide, the product can be matched with flocculating agent PAC, aluminium sulphate and the like, and it has the best effect in water treatment.
Metallurgical Mineral Dressing:It can be used in floatation and smelting of Zinc, manganese and copper mines, its leachate and slag can be added into PAM to improve the separation efficiency.
Sand Prevention and Solidification: The nonionic-polyacrylamide is dissolved into 0.3% concentration, cross-linking agent is added, and the product can be sprayed on desert to prevent and solidify sand.
Chemical mudding agent: 9.5 share nonionic-polyacrylamide is used and is mixed to 0.5share NN-methylene diacrylamide, the product can be used as chemical mudding agent for plugging water of dikes, ground foundation, channels and the like.
Oil field profile controlling and water-plugging agent: The product can be matched with lignocellulose, a certain amount of chemical adhesive can be added, and the product can be used as oil field profile controlling and water-plugging agent.
Soil humectant:It can preserve water and solidify sand for soil and can play a role of humectant on slope grass planting, tree planting, and sand solidification and dust prevention of soil.
2.High efficiency
3.Best Price and first quality
4.Large quantity discount
Performance Indicators of Nonionic-polyacrylamide: (Enterprise Standard: Q/AJC002-2006)
Trademark
Molecular Weight (million)
Degree of Hydrolysis
Solid Content%
Effective PH Range
Residual Monomer Content%
whn-1
5-8 (adjustable)
<=5
>=90%
1-8
<=0.05
whn-2
8-10 (adjustable)
whn-3
10-12 (adjustable)
whn-4
12-15 (adjustable)
Main Application
Mine Washing: The product can be used in coal washing tailing centrifugal separation, can be used in sedimentation and filtration of coal powder and coal mud, and can improve the recovery rate of coal powder and the filtration speed.
Textile Auxiliary Agent:The product can be added with some other chemicals to prepare chemical grout, is used to starch textiles, can improve the adhesive property, penetrability and desizing performance, enables the textile to have electrostatic prevention performance, reduces the desizing rate, and reduces the starch mixing spots, cloth machine breaking efficiency, and falling objects.
Sewage Water Treatment:When sewage water systems are acidophilic, it is more suitable to select nonionic-polyacrylamide, the product can be matched with flocculating agent PAC, aluminium sulphate and the like, and it has the best effect in water treatment.
Metallurgical Mineral Dressing:It can be used in floatation and smelting of Zinc, manganese and copper mines, its leachate and slag can be added into PAM to improve the separation efficiency.
Sand Prevention and Solidification: The nonionic-polyacrylamide is dissolved into 0.3% concentration, cross-linking agent is added, and the product can be sprayed on desert to prevent and solidify sand.
Chemical mudding agent: 9.5 share nonionic-polyacrylamide is used and is mixed to 0.5share NN-methylene diacrylamide, the product can be used as chemical mudding agent for plugging water of dikes, ground foundation, channels and the like.
Oil field profile controlling and water-plugging agent: The product can be matched with lignocellulose, a certain amount of chemical adhesive can be added, and the product can be used as oil field profile controlling and water-plugging agent.
Soil humectant:It can preserve water and solidify sand for soil and can play a role of humectant on slope grass planting, tree planting, and sand solidification and dust prevention of soil.
Excellent quality Anionic Polyacrylamide Granular APAM for water treatment
Polyacrylamide Granular
a.)Good for water treatment
b)Very useful in paper making
c) Industrial treatment and recycling.
Polyacrylamide Granular
Poppularly can be called flocculant, PAM has the molecular formular of +CH2-CHn, Linear polymers, molecular weight of 4,000,000—20,000,000, strong flocculation, easily soluble in water, dissolute above 120. It appears white and light-yellow at solid, colorless vicous colloid at liquid.
With this special structure, it can easily adsorpte the suspended solids to purify the water thoroughly.
So it is widely used in metallurgy, papermaking, petroleum, chemical industry, textiles and ore dressing.
Application:
1,Mainly used as flocculants:The product is widely used in chemical industry wastewater,wastewater treatment,municipal wastewater treatment.
2,For the oil industry,oil,drilling mud,waste mud treatment,used it to prevent water channeling,reducing friction and enhancing oil recovery is widely used.
3,For textile sizing agent.
4,For the paper industry.
5,For other industries,such as food industry,synthetic resin coating,civil engineering grouting material plugging,building materials industry,also it can improve the qualityof electroplating industry.
Packaging:
Package:packed with kraft bag,25kgs per bag (it is ok to pack the product as customer's requests )
a.)Good for water treatment
b)Very useful in paper making
c) Industrial treatment and recycling.
Polyacrylamide Granular
Poppularly can be called flocculant, PAM has the molecular formular of +CH2-CHn, Linear polymers, molecular weight of 4,000,000—20,000,000, strong flocculation, easily soluble in water, dissolute above 120. It appears white and light-yellow at solid, colorless vicous colloid at liquid.
With this special structure, it can easily adsorpte the suspended solids to purify the water thoroughly.
So it is widely used in metallurgy, papermaking, petroleum, chemical industry, textiles and ore dressing.
Application:
1,Mainly used as flocculants:The product is widely used in chemical industry wastewater,wastewater treatment,municipal wastewater treatment.
2,For the oil industry,oil,drilling mud,waste mud treatment,used it to prevent water channeling,reducing friction and enhancing oil recovery is widely used.
3,For textile sizing agent.
4,For the paper industry.
5,For other industries,such as food industry,synthetic resin coating,civil engineering grouting material plugging,building materials industry,also it can improve the qualityof electroplating industry.
Packaging:
Package:packed with kraft bag,25kgs per bag (it is ok to pack the product as customer's requests )
Excellent quality methyl methacrylate
1.High Purity:99.9%
2.strong production capacity
3.Good quality and low price
4.offer convenient services
5.Timely delivery
Specification:
Methyl Methacrylate(MMA)
Prpduct name:Methyl Methacrylate
Other name: MMA; Methacrylic acid methyl ester; 2-Methylacrylic acid methyl ester
Purity:99%
CAS NO: 80-62-6
EINECS NO: 201-297-1
Molecular formula: C5H8O2
Molecular Weight: 100.12
Appearance:colorless transparent liquid
Item
Index
Top grade
First grade
Qualified
Appearance
Clear transparent liquid,without suspended material
ColorPt-Co≤
10
20
30
Density,g/cm3
0.842~0.848
0.838~0.948
Acidity %≤
0.010
0.04
0.08
Water %≤
0.05
0.3
0.5
Methyl methycrylic acid %≥
99.8
99.0
98.0
Useage:
Mainly used as organic glass monomer, methyl methacrylate and for making other plastics, paint, etc
properties :
Colorless liquid, volatile. Melting point - 48 ° c, boiling point 100-101 0.9440 relative density 1.4142 refractive index 10 degrees, flash point of soluble in ethanol,
ethyl ether, acetone etc. Various organic solvents. Slightly soluble in water and glycol.
Storeage:
Zinc steel barrel packaging, ate 190kg. Stored in a cool ventilated place,
methyl methacrylate transported as common danger
Package: 200kg/ Drum,16MT/20’FCL
2.strong production capacity
3.Good quality and low price
4.offer convenient services
5.Timely delivery
Specification:
Methyl Methacrylate(MMA)
Prpduct name:Methyl Methacrylate
Other name: MMA; Methacrylic acid methyl ester; 2-Methylacrylic acid methyl ester
Purity:99%
CAS NO: 80-62-6
EINECS NO: 201-297-1
Molecular formula: C5H8O2
Molecular Weight: 100.12
Appearance:colorless transparent liquid
Item
Index
Top grade
First grade
Qualified
Appearance
Clear transparent liquid,without suspended material
ColorPt-Co≤
10
20
30
Density,g/cm3
0.842~0.848
0.838~0.948
Acidity %≤
0.010
0.04
0.08
Water %≤
0.05
0.3
0.5
Methyl methycrylic acid %≥
99.8
99.0
98.0
Useage:
Mainly used as organic glass monomer, methyl methacrylate and for making other plastics, paint, etc
properties :
Colorless liquid, volatile. Melting point - 48 ° c, boiling point 100-101 0.9440 relative density 1.4142 refractive index 10 degrees, flash point of soluble in ethanol,
ethyl ether, acetone etc. Various organic solvents. Slightly soluble in water and glycol.
Storeage:
Zinc steel barrel packaging, ate 190kg. Stored in a cool ventilated place,
methyl methacrylate transported as common danger
Package: 200kg/ Drum,16MT/20’FCL
30% PAC used in sewage treatment
PAC(Poly Aluminium Chloride):
High efficient flocculant
Widely used in drinking water, industrial water, sewage treatment,etc
Product name: Polyaluminium chloride(PAC)
Product performance and usage
The product is high-efficient, cheap and nontoxic inorganic high molecular compound. The liquid is colorless ;the solid is light yellow powder. Ti is easily soluble in water. In the hydrolytic process, it is accompanied with the chemical processes such as electrochemistry,
coagulation, absorption and precipitation. The product has the features including wide applicable range of PH value, large granule, and quick speed in sedimentation. It is widely
applied for treating the domestic drinking water, domestic sewage and industrial waste water.
Package and storage
The liquid is packed in polyethylene bucket and solid is packed in two-layer bag with the interior in plastic and the exterior in woven. The weight of each bag bag is 25kg
With certain causticity, the product shall be sealed and stored in the dry and ventilated place to prevent from rain, high temperature and strong sunlight. The shelf life of liquid product is 6 months and that of solid product is 12 months.
PAC
By a series of different degree of polymerization of inorganic polymer compound composition, main components for AL13O4 (OH) 24 (H2O) 127 + high polymer chain of charge of polyaluminium ion, water and electricity colloidal with efficiency and Bridges and flocculation function, which can effectively remove water turbidity, chroma, heavy metal ions and trace the organic toxicants.
Product characteristics,
1, flocculation body shape, active, acquired.
2, no need to add alkaline additives, if encounter ChaoXie, its effect is unchanged.
3 and optimal PH wide adaptability, and widely used.
4 and treated water salinity.
5, can remove heavy metals and radioactive substances in water pollution.
6 and high effective ingredients, storage and transportation.
Name
solid
Excellent article
First-class article
AL
2
o
3
%≥
30.0
28.0
Base saturability %
40-90
40-90
Water insoluble content
0.3
1.0
PH(1% water solution)
3.5-5.0
3.5-5.0
N %≤
0.01
As% ≤
0.0002
Pb%≤
0.001
Cd%≤
0.0002
Hg%≤
0.00001
Cr
6+
%≤
0.0005
High efficient flocculant
Widely used in drinking water, industrial water, sewage treatment,etc
Product name: Polyaluminium chloride(PAC)
Product performance and usage
The product is high-efficient, cheap and nontoxic inorganic high molecular compound. The liquid is colorless ;the solid is light yellow powder. Ti is easily soluble in water. In the hydrolytic process, it is accompanied with the chemical processes such as electrochemistry,
coagulation, absorption and precipitation. The product has the features including wide applicable range of PH value, large granule, and quick speed in sedimentation. It is widely
applied for treating the domestic drinking water, domestic sewage and industrial waste water.
Package and storage
The liquid is packed in polyethylene bucket and solid is packed in two-layer bag with the interior in plastic and the exterior in woven. The weight of each bag bag is 25kg
With certain causticity, the product shall be sealed and stored in the dry and ventilated place to prevent from rain, high temperature and strong sunlight. The shelf life of liquid product is 6 months and that of solid product is 12 months.
PAC
By a series of different degree of polymerization of inorganic polymer compound composition, main components for AL13O4 (OH) 24 (H2O) 127 + high polymer chain of charge of polyaluminium ion, water and electricity colloidal with efficiency and Bridges and flocculation function, which can effectively remove water turbidity, chroma, heavy metal ions and trace the organic toxicants.
Product characteristics,
1, flocculation body shape, active, acquired.
2, no need to add alkaline additives, if encounter ChaoXie, its effect is unchanged.
3 and optimal PH wide adaptability, and widely used.
4 and treated water salinity.
5, can remove heavy metals and radioactive substances in water pollution.
6 and high effective ingredients, storage and transportation.
Name
solid
Excellent article
First-class article
AL
2
o
3
%≥
30.0
28.0
Base saturability %
40-90
40-90
Water insoluble content
0.3
1.0
PH(1% water solution)
3.5-5.0
3.5-5.0
N %≤
0.01
As% ≤
0.0002
Pb%≤
0.001
Cd%≤
0.0002
Hg%≤
0.00001
Cr
6+
%≤
0.0005
Export Best of Anionic Polyacrylamide/polyacrylamide acrylamide polymer
1.polyacrylamide
2.with high molecular weight
3.good flocculant
4.sample is available
Anionic Polyacrylamid
Description:
The physical properties of polyacrylamide mainly depends on the behaviour in aqueous solution. Because of molecules chain gene containing amide groups or ions gene, the distinguishing feature is highly hydrophilic, and it can be dissolved in water in various proportions, and polyacrylamide aqueous solution on the electrolyte has a good tolerance, such as it is not sensitive with ammonium chloride, sodium sulfate, , and compatible.with surface active agen
Specification:
Anionic PAM
Cationic PAM
Molecular weight
5million-22million
Ion degree
20-80
Viscosity number
1600
Viscosity number
1200
Solid content
≥90%
Solid content%
90.5
Insoluble%
0.05-0.15
Insoluble%
≤0.1%
Apperence
white granule or powder
Apperence
White powder
Application:
It is mainly used:
1)Industrial wastewater treatment
2)Drinking water treatment
3)Starch ethanol plants and the loss of plant starch lees recovery
4)Oil displacement agent for the tertiary oil recovery
5)Water shutoff agent
6)Auxiliary of papermaking industry
About us :
Our company is well known as a reliable manufacture, mainly producing water treatment materials, such as Polyaluminium Chloride (PAC),PAM including APAM (Anionic Polyacrylamide) and CPAM (Cationic Polyacrylamide),
and activated carbon series ,i.e. Coconut shell activated carbon, nut shell activated carbon,
coal columnar activated and powder activated carbon .
2.with high molecular weight
3.good flocculant
4.sample is available
Anionic Polyacrylamid
Description:
The physical properties of polyacrylamide mainly depends on the behaviour in aqueous solution. Because of molecules chain gene containing amide groups or ions gene, the distinguishing feature is highly hydrophilic, and it can be dissolved in water in various proportions, and polyacrylamide aqueous solution on the electrolyte has a good tolerance, such as it is not sensitive with ammonium chloride, sodium sulfate, , and compatible.with surface active agen
Specification:
Anionic PAM
Cationic PAM
Molecular weight
5million-22million
Ion degree
20-80
Viscosity number
1600
Viscosity number
1200
Solid content
≥90%
Solid content%
90.5
Insoluble%
0.05-0.15
Insoluble%
≤0.1%
Apperence
white granule or powder
Apperence
White powder
Application:
It is mainly used:
1)Industrial wastewater treatment
2)Drinking water treatment
3)Starch ethanol plants and the loss of plant starch lees recovery
4)Oil displacement agent for the tertiary oil recovery
5)Water shutoff agent
6)Auxiliary of papermaking industry
About us :
Our company is well known as a reliable manufacture, mainly producing water treatment materials, such as Polyaluminium Chloride (PAC),PAM including APAM (Anionic Polyacrylamide) and CPAM (Cationic Polyacrylamide),
and activated carbon series ,i.e. Coconut shell activated carbon, nut shell activated carbon,
coal columnar activated and powder activated carbon .
Export Best of Anionic Polyacrylamide/polyacrylamide acrylamide polymer
1.polyacrylamide
2.molecular weight:5-22million
3.Solid content:more than 90%
Anionic Polyacrylamid
Description:
It is the white powder. The APAM with the molecular weight of 5-22 million has good water solubility, and it can be dissolved in water by arbitrary proportion but not in organic solvents. It has the characteristics of high-polymer electrolyte in the neutral and alkaline medium, and it is sensitive to the electrolyte salt. And it can be cross-linked into insoluble gel with the high valence metal ions.
Specification:
1.Appearance: white granular powder
2.Molecular weight(million): ≥18
3.Water insoluble(wt%): ≤0.1
4.Ion degree(%):≤5
5.Dissolving speed ( H): ≤ 2
6.Residual monomer (%): ≤ 0.1
7.Solid content(%): ≥ 88
Application:
(1) Industrial waste water treatment:
For the neutral or alkaline waste water with pH value of 7-14, large suspended particles and ions of positive charge, it has the best treating effect, such as the waste water from iron industry, electroplating factory, metallurgical industry, coal washing, etc..
(2) Drinking water treatment:
When the drinking water still does not meet the standard after the treatment of the precipitation and filtering, then the APAM can be used as the flocculant. Its dosage is 2%-5% of that of the inorganic flocculants, but the effect of former is dozens of times of that of latter.
(3) It can be used for the recycling of the loss of brewers' grains in the alcohol plant and starch in the starch factory.
(4) It can be used as the water block agent in the oil field, and also the oil-displacing agent during the tertiary recovery.
(5) It can be applied in the paper-making industry. It can be used as the dispersant, retention aid, etc. in the long fiber paper-making, and also the flocculant for the waste water from the paper-making.
About us :
Our company is well known as a reliable manufacture, mainly producing water treatment materials, such as Polyaluminium Chloride (PAC),PAM including APAM (Anionic Polyacrylamide) and CPAM (Cationic Polyacrylamide),
and activated carbon series ,i.e. Coconut shell activated carbon, nut shell activated carbon, coal columnar activated and powder activated carbon .
If you need any of our products ,please feel free to contact us.
Thanks for your attention!
2.molecular weight:5-22million
3.Solid content:more than 90%
Anionic Polyacrylamid
Description:
It is the white powder. The APAM with the molecular weight of 5-22 million has good water solubility, and it can be dissolved in water by arbitrary proportion but not in organic solvents. It has the characteristics of high-polymer electrolyte in the neutral and alkaline medium, and it is sensitive to the electrolyte salt. And it can be cross-linked into insoluble gel with the high valence metal ions.
Specification:
1.Appearance: white granular powder
2.Molecular weight(million): ≥18
3.Water insoluble(wt%): ≤0.1
4.Ion degree(%):≤5
5.Dissolving speed ( H): ≤ 2
6.Residual monomer (%): ≤ 0.1
7.Solid content(%): ≥ 88
Application:
(1) Industrial waste water treatment:
For the neutral or alkaline waste water with pH value of 7-14, large suspended particles and ions of positive charge, it has the best treating effect, such as the waste water from iron industry, electroplating factory, metallurgical industry, coal washing, etc..
(2) Drinking water treatment:
When the drinking water still does not meet the standard after the treatment of the precipitation and filtering, then the APAM can be used as the flocculant. Its dosage is 2%-5% of that of the inorganic flocculants, but the effect of former is dozens of times of that of latter.
(3) It can be used for the recycling of the loss of brewers' grains in the alcohol plant and starch in the starch factory.
(4) It can be used as the water block agent in the oil field, and also the oil-displacing agent during the tertiary recovery.
(5) It can be applied in the paper-making industry. It can be used as the dispersant, retention aid, etc. in the long fiber paper-making, and also the flocculant for the waste water from the paper-making.
About us :
Our company is well known as a reliable manufacture, mainly producing water treatment materials, such as Polyaluminium Chloride (PAC),PAM including APAM (Anionic Polyacrylamide) and CPAM (Cationic Polyacrylamide),
and activated carbon series ,i.e. Coconut shell activated carbon, nut shell activated carbon, coal columnar activated and powder activated carbon .
If you need any of our products ,please feel free to contact us.
Thanks for your attention!
Export qualified PAM flocculant
1.PAM is soluble in water
2.No corrosive
3.Good Flocculation effect
4.White granule powder
Water Treatment Flocculant polyacrylamide (PAM), also known as the 3rd flocculant is formed by the polymerization of acrylamide monomer in the organic polymer, colorless, tasteless, odorless, soluble in water, no corrosion. Polyacrylamide stable at room temperature, high temperature, frozen during the readily biodegradable, and reduces flocculation, so the storage and preparation of dosage, the temperature should be controlled at 2 ~ 55 , the flocculation effect is better, otherwise it will reduce the use of effect.
Flocculating mechanism are: polyacrylamide polar amide groups, amide groups by hydrogen bonds easily adsorbed in the sediment. In addition, polyacrylamide flocculants have a long molecular chain, the length of 100A °, but the chain width of only 1A °, a large number of level of long-chain absorption in the water with a huge surface area, the flocculation is good, also use long-chain bridging between the particles in the flocculation, floc formation of large particles, accelerated sedimentation.
APAM with acrylamide were together before adding alkali hydrolysis process, by granulation, drying, grinding, the product appearance of small white granules or powder-like solid. Anionic PAM flocculants applied to the surface of positively charged particles in the slurry, and cationic compared to its high molecular weight, molecular stretching in the water with larger, so it has good properties of the particles of floc. Suspended solids can be effectively used for mineral separation settlement. Except for blast furnace, aluminum, paper and other waste water treatment, also used in treatment of a city under treatment.
Name
MolecularWeight(ten thousand)
Ion(%)
Solid Content(%)
remnant
list %
hydrolysis
Dissolve
Time
(min)
CPAM
------ ----
10-50
≥90
≤0.05
20-25
≤40
APAM
600-2000
--- --
≥90
≤0.05
20-30
≤60
2.No corrosive
3.Good Flocculation effect
4.White granule powder
Water Treatment Flocculant polyacrylamide (PAM), also known as the 3rd flocculant is formed by the polymerization of acrylamide monomer in the organic polymer, colorless, tasteless, odorless, soluble in water, no corrosion. Polyacrylamide stable at room temperature, high temperature, frozen during the readily biodegradable, and reduces flocculation, so the storage and preparation of dosage, the temperature should be controlled at 2 ~ 55 , the flocculation effect is better, otherwise it will reduce the use of effect.
Flocculating mechanism are: polyacrylamide polar amide groups, amide groups by hydrogen bonds easily adsorbed in the sediment. In addition, polyacrylamide flocculants have a long molecular chain, the length of 100A °, but the chain width of only 1A °, a large number of level of long-chain absorption in the water with a huge surface area, the flocculation is good, also use long-chain bridging between the particles in the flocculation, floc formation of large particles, accelerated sedimentation.
APAM with acrylamide were together before adding alkali hydrolysis process, by granulation, drying, grinding, the product appearance of small white granules or powder-like solid. Anionic PAM flocculants applied to the surface of positively charged particles in the slurry, and cationic compared to its high molecular weight, molecular stretching in the water with larger, so it has good properties of the particles of floc. Suspended solids can be effectively used for mineral separation settlement. Except for blast furnace, aluminum, paper and other waste water treatment, also used in treatment of a city under treatment.
Name
MolecularWeight(ten thousand)
Ion(%)
Solid Content(%)
remnant
list %
hydrolysis
Dissolve
Time
(min)
CPAM
------ ----
10-50
≥90
≤0.05
20-25
≤40
APAM
600-2000
--- --
≥90
≤0.05
20-30
≤60
Exporting Large Quantity Polyacrylamide PAM
Polyacrylamide PAM
1) Timely shipment
2) Effective flocculation
3) Easily soluble in water
4) ISO 9001: 2000
Polyacrylamide PAM
Physical property
The physical property of PAM is mainly depended on the behavior in the aqueous solution.
The outstanding feature is high hydrophilic—can soluble in water by all kinds of proportion.
Its water solution can bear electrolyte well, such as not sensitive to sodium sulfate and
ammonia chloride, and is compatible to surfactant.
Chemical reaction
Side group of molecular-chain of PAM is activated amide group that can generate many
derivatives through chemical reaction, but it can’t proceed completely because of the
adjacent gene reaction.
Anionic polyacrylamide specifications:
Item
C1610
C1620
C1635
C1650
Ion content
Low
Middle
Middle
High
Molecular weight(per 10 thousand)
1000-1200
1000-1200
800-1000
800-1000
Solid content
Min 90%
Min 90%
Min 90%
Min 90%
Free monomer
Max 0.05%
Max 0.05%
Max 0.05%
Max0.05%
Dissolution time
Max 40
Max 40
Max 40
Max 40
1) Timely shipment
2) Effective flocculation
3) Easily soluble in water
4) ISO 9001: 2000
Polyacrylamide PAM
Physical property
The physical property of PAM is mainly depended on the behavior in the aqueous solution.
The outstanding feature is high hydrophilic—can soluble in water by all kinds of proportion.
Its water solution can bear electrolyte well, such as not sensitive to sodium sulfate and
ammonia chloride, and is compatible to surfactant.
Chemical reaction
Side group of molecular-chain of PAM is activated amide group that can generate many
derivatives through chemical reaction, but it can’t proceed completely because of the
adjacent gene reaction.
Anionic polyacrylamide specifications:
Item
C1610
C1620
C1635
C1650
Ion content
Low
Middle
Middle
High
Molecular weight(per 10 thousand)
1000-1200
1000-1200
800-1000
800-1000
Solid content
Min 90%
Min 90%
Min 90%
Min 90%
Free monomer
Max 0.05%
Max 0.05%
Max 0.05%
Max0.05%
Dissolution time
Max 40
Max 40
Max 40
Max 40
Exporting Rfine Polyaluminium Chloride PAC Water Grade
PAC
1.Fast flocculent setting speed
2.Wide scope to PH value
3.Obvious water purification effect
PAC
Application:
PAC is mainly used as the flocculant agent for the treatment of drinking water
and industrial wastewater (such as printing and dyeing water and pulping wastewater).
It also widely applies to precise casting, paper-making, tanning and other industries.
Main technical index:
Index name
Product grade
Drinking water
Non-drinking water
Al2O3
Min 29-32
Min 29-30
Basicity %
50-85
60-85
PH value
3.5-5
3.5-5
Content of water insoluble
Max 0.5-1.5
Max 1.5-3
Pb
PPm max 3.0
As
PPm max 0.5
Fe
PPm max 0.3
Hg
PPm max 0.2
Outstanding features:
Fast flocculent setting speed
Wide scope to PH value
Obvious water purification effect
1.Fast flocculent setting speed
2.Wide scope to PH value
3.Obvious water purification effect
PAC
Application:
PAC is mainly used as the flocculant agent for the treatment of drinking water
and industrial wastewater (such as printing and dyeing water and pulping wastewater).
It also widely applies to precise casting, paper-making, tanning and other industries.
Main technical index:
Index name
Product grade
Drinking water
Non-drinking water
Al2O3
Min 29-32
Min 29-30
Basicity %
50-85
60-85
PH value
3.5-5
3.5-5
Content of water insoluble
Max 0.5-1.5
Max 1.5-3
Pb
PPm max 3.0
As
PPm max 0.5
Fe
PPm max 0.3
Hg
PPm max 0.2
Outstanding features:
Fast flocculent setting speed
Wide scope to PH value
Obvious water purification effect
Exporting Well PAM @ Polyacrylamide
Polyacrylamide PAM:
1.Textile Auxiliary Agent
2.Sewage Water Treatment
3.Oil field profile controlling
Polyacrylamide PAM
Physical property
The physical property of PAM is mainly depended on the behavior in the aqueous solution. The outstanding feature is high hydrophilic—can soluble in water by all kinds of proportion.
Its water solution can bear electrolyte well, such as not sensitive to sodium sulfate and ammonia chloride, and is compatible to surfactant.
Chemical reaction
Side group of molecular-chain of PAM is activated amide group that can generate many derivatives through chemical reaction, but it can’t proceed completely because of the adjacent gene reaction.
Anionic polyacrylamide specifications:
Item
C1610
C1620
C1635
C1650
Ion content
Low
Middle
Middle
High
Molecular weight(per 10 thousand)
1000-1200
1000-1200
800-1000
800-1000
Solid content
Min 90%
Min 90%
Min 90%
Min 90%
Free monomer
Max 0.05%
Max 0.05%
Max 0.05%
Max0.05%
Dissolution time
Max 40
Max 40
Max 40
Max 40
Cationic polyacrylamide specifications:
Item
Data
Molecular weight (per 10 thousand)
800-1000
1000-1200
1300-1500
1600-2000
Ion content
25-45
45-55
55-60
65-75
Solid content
88±2%
88±2%
88±2%
88±2%
Hydrolysis degree
20-30
20-30
20-30
20-30
Residual monomer
Max 0.05%
Max 0.05%
Max 0.05%
Max 0.05%
Dissolution time
Max 2h
Max 2h
Max 2h
Max 2h
Appearance
White granules
1.Textile Auxiliary Agent
2.Sewage Water Treatment
3.Oil field profile controlling
Polyacrylamide PAM
Physical property
The physical property of PAM is mainly depended on the behavior in the aqueous solution. The outstanding feature is high hydrophilic—can soluble in water by all kinds of proportion.
Its water solution can bear electrolyte well, such as not sensitive to sodium sulfate and ammonia chloride, and is compatible to surfactant.
Chemical reaction
Side group of molecular-chain of PAM is activated amide group that can generate many derivatives through chemical reaction, but it can’t proceed completely because of the adjacent gene reaction.
Anionic polyacrylamide specifications:
Item
C1610
C1620
C1635
C1650
Ion content
Low
Middle
Middle
High
Molecular weight(per 10 thousand)
1000-1200
1000-1200
800-1000
800-1000
Solid content
Min 90%
Min 90%
Min 90%
Min 90%
Free monomer
Max 0.05%
Max 0.05%
Max 0.05%
Max0.05%
Dissolution time
Max 40
Max 40
Max 40
Max 40
Cationic polyacrylamide specifications:
Item
Data
Molecular weight (per 10 thousand)
800-1000
1000-1200
1300-1500
1600-2000
Ion content
25-45
45-55
55-60
65-75
Solid content
88±2%
88±2%
88±2%
88±2%
Hydrolysis degree
20-30
20-30
20-30
20-30
Residual monomer
Max 0.05%
Max 0.05%
Max 0.05%
Max 0.05%
Dissolution time
Max 2h
Max 2h
Max 2h
Max 2h
Appearance
White granules
FERRIC CHLORIDE ANHYDROUS
Formula: FeCl3
Trade mark: YUYUE Brand
Appearance: Greenish-brown crystal.
Ferric Chloride anhydrous is specially for water-treatment in industries, corrosive for electronic printed board.
1.Specification
ITEMS
STANDARD
RESULT
Ferric chloride (FeCl
3
) :
≥ 96%
96.8
Ferrous chloride(FeCl
2
) :
≤2.0%
1.7
Insoluble residue:
≤1.5%
1.3
2.usage
Especially for water-treatment in industries, corrosive for electronic printed board, chlorinating agent in metallurgical industry, oxidant and mordant in dye industry, and catalyst, oxidant, and chlorinating agent in organic synthesis, and also for making ferric salt, pigment as raw material.
3.Packing
in 50kg iron drum (21MT/FCL 20')
Trade mark: YUYUE Brand
Appearance: Greenish-brown crystal.
Ferric Chloride anhydrous is specially for water-treatment in industries, corrosive for electronic printed board.
1.Specification
ITEMS
STANDARD
RESULT
Ferric chloride (FeCl
3
) :
≥ 96%
96.8
Ferrous chloride(FeCl
2
) :
≤2.0%
1.7
Insoluble residue:
≤1.5%
1.3
2.usage
Especially for water-treatment in industries, corrosive for electronic printed board, chlorinating agent in metallurgical industry, oxidant and mordant in dye industry, and catalyst, oxidant, and chlorinating agent in organic synthesis, and also for making ferric salt, pigment as raw material.
3.Packing
in 50kg iron drum (21MT/FCL 20')
Subscribe to:
Posts (Atom)