Water treatment chemicals for reverse osmosis system
Alkyl epoxy carboxylate
Organic bisphosphonates scale inhibitor
With no biophosphonates technoloty to control desposition and scale
To stabilize halogen
Achieve maximum sedimentary control
Alkialine treatment solutions, to reduce or cancel acid dose
Thick water discharged eco-friendly cand reliable
Products explanation and useage
AE series is a Contain alkyl epoxy carboxylate alkaline solutions. Alkyl epoxy carboxylate is a non organic phosphonate CaCO3 inhibitor, it is the main component of AE series technique, and for special scale inhibitor use. AE technology in control calcium carbonate scaling is a major breakthrough. This product in the pH value of 9.0- 7.8 - open cooling water circulation system, still need to add certain inhibitor to control corrosion. Alkaline AE solutions apply wide, in langly er index (LSI) 2.8, scaling can very well control or deposite.
Organic bisphosphonates scale inhibitor in chlorine existence situation, easy to break down, or conversion, leading to carbonate controlling aspects is invalid. AE products in different concentrations of chlorine exists,can still inhibit sedimentary of calcium carbonate effectively. AE molecule can stabilize halogen.
Dosage and Usage explanation
AE series product correctly handling depends on many factors, such as potential fouling conditions, especially in a given installation conditions, according to the water hardness, alkalinity, PH value, concentration ratio circumstance, choose chemicals and the adding dosage according to different heat exchanger, sometimes need to add material corrosion, high calcium, high basicity can sometimes add less or not add corrosion inhibitors. Adding AE products in the cooling system should choose the place where large cooling water can be mixed quickly.
Dosage calculation according to dischage quantity,add 80-120PPM . In order to get the best effect, AE products should adopt net dosing way (not dilute). If must be diluted pls dilute with low hardness water
Pakeage:25KG/Plastic drum
Storage:AE products should storge under the middle temperature,avoiding freezing. If they were frozen,completely thawing and fully mixing before use.
No comments:
Post a Comment