good faith management polyacrylamide

1)Easy to dissolve
2)High efficiency
3)High molecular
4)Reasonal Price, best quality
1. mainly for flocculation: Because of its molecular chain polarity genes contain a certain amount of solid particles suspended in water absorption, so that particles form large flocs. It speeds up the particles in suspension of settlement, there are very obvious solution to speed up the clarification, the promotion of filtering effects, widely used in chemical industry wastewater, wastewater treatment, municipal wastewater treatment. Especially when the water was acidic, the use of this product is most suitable. Flocculant with inorganic iron, polyethylene and aluminum salts used in conjunction.
2. for the oil industry, oil, drilling mud, waste mud treatment, to prevent water channeling, reducing friction, enhancing oil recovery, oil recovery is widely used.
3. for textile sizing agent, slurry, stable performance, falling less pulp, fabric breakage rate is low, clean cloth.
4. for the paper industry, first increase the filler and pigment retention. To reduce wastage of raw materials and environmental pollution; the second is to improve the paper strength (including dry strength and wet strength), In addition, the use of PAM can improve the tear resistance of paper and porous, to improve the visual and print performance, also used in the food and tea packaging in.
5. other industries, food industry, for sugar cane, sugar beet juice clarification and syrup production in the extraction of phosphorus float. Enzyme broth flocculation industry, also used to feed, protein recovery, stable quality, performance, recovery of protein powder on the chicken and the survival rate of weight, no adverse effects on egg production, synthetic resin coatings, civil engineering block grouting material water, building materials industry, improve the quality of cement, construction adhesives, sealing repair and blocking agent, soil improvement, electroplating, dyeing and printing industries.

good manufacturer of sodium gluconate 98%

1.Sodium Gluconate 98%
2.Sodium Gluconate as Detergent
3.Sodium Gluconate manufacturer
4.Sodium Gluconate CAS527-07-1
5.good
Sodium Gluconate

Description:
Tech grade Synonyms: Gluconic acid, sodium salt;
Gluconic scid, monosodium salt Molecular Formula:C6H11O7Na Molecular weight: 218.14 CAS No.: [527-07-1]
Performance and usage: (In Industry)
This product is widely used in textile dyeing, printing and metal surface water treatment, chelating agent, steel surface cleaning agent, cleaning agent for glass bottle,chelating agent for cement, plating and alumina dyeing industries.
Standard Packing:
Neutral packing, packed in plastic woven bags, 25kg per bag
20FCL 23.5T
Specification
:

Item
Standards
Assay
98% Min
Heavy metals(as Pb)
0.002% Max
Loss on drying
2.0% Max
Reducing substances
0.5% Max
Chloride(as Cl)
0.05% Max
Sulphate(as SO4)
0.05% Max
PH
6.2-7.8

good polyacrylamide of factory supplying (IVY)

Polyacrylamide
1.Cationic Polyacrylamide
2.Polymer
3.Wastewater Treatment Chemical
Polyacrylamide:


Polyacrylamide is a water soluble high-molecular polymer with a wide scope of usage.
uniform granule,good solubility
Specification
Cationic Polyacrylamide
ITEM
MOLECULAR WEIGHT
CATIONIC DEGREE
C8015
MEDIUM HIGH
LOW
C8020
MEDIUM HIGH
MEDIUM LOW
C8030
MEDIUM HIGH
MEDIUM HIGH
C8040
MEDIUM HIGH
HIGH
C8050
MEDIUM HIGH
ULTRA HIGH
C1205
LOW
HIGH
C1260
HIGH
ULTRA HIGH
C6040
MEDIUM
MEDIUM HIGH
C6050
HIGH
MEDIUM

good polyacrylamide pam as flocculant produced by Ouya

1,white powder or gel.
2,flocculating agent.
3,for treatment of wastewater and drinking water
4 HS: 9003-05-8



Anionic Polyacrylamid

Description:
The product is amde with the tecnoogy of pre-acrylamide alkaline hydrolysis and the procedure of granulation drying ,puverizing .The appearance feature of the product is white small particles or powder.


Specification:
Molecular weight (million)
18-25
15-17
10-14
8-10
6-8
4-5
Solid content (%)
≥90
≥90
≥90
≥90
≥90
≥90
Hydrolysis degree (%)
20-30
15-30
15-30
10-30
8-15
8-10
Residual monomer (%)
0.05-0.1
0.05-0.1
0.05-0.1
0.05-0.1
0.05-0.1
0.05-0.1
Effective pH value
7-14
7-14
7-14
7-14
7-14
7-14
Appearance
White powder/granule
Package: 25Kg Packed with woven bag innner-lined with PE bag or on the request of customers


Application:
Paper , leather and leather industry making industry, Drinking water purification,
Oil field , coal exploration
1. Paper , textile and leather making industry for the clarification of liquid caustic soda.
2. Drinking water purification, treatment of municipal sewage sludge, municipal solid waste and industrial effluent.
3.Oil field , coal exploration, geology, water conservancy,
4,Textile, carpet industry, sizing, quick-setting cement, synthetic resin coating.
sugar industry
5, Aquaculture feed additives and adhesives.


About us :

Our company is wellknown as a reliable manufacture, mainly producing water treatment materials. Such as Polyaluminium Chloride (PAC),PAM including (Anionic Polyacrylamide)APAM and CPAM (Cationic Polyacrylamide), and activated carbon series , i.e. Coconut shell activated carbon, nut shell activated carbon, coal columnar activated and powder activated carbon , with 2-shape: powder and columnar ,and materials: wood-based and coal-based.

good price pac polyaluminium chloride

pac polyaluminium chloride
1.(AL2O3)CONTENT: 30%
2.PAC drinking water treatment
3. supply by factory
4. free sample
pac polyaluminium chloride
Main characteristics:Compared with other coagulants, this product has the following strong points: 1, Wide range of application.
Main characteristics:Compared with other coagulants, this product has the following strong points: 1, Wide range of application.2, Good settling behavior. 3, Wide range of suitable PH value(5-9). 4. Stable settling behavior can be kept when the water temperature is low. 5, Degree of alkalisation is higher than other aluminium salt,iron salt,small corrosion to equipment.
Technical index and use: According to the improvement of people's requirement on water quality, our company has developed polyaluminum oxide series products:polyaluminium chloride,aluminium chlorhydroxide,ferric chloride,aluminium sulphate,compound iron etc..

Index name
Liquid
Solid
Top-grade
First-grade
Second-grade
Top-grade
First-grade
Second-grade
Appearance
Colorless
Light yellow
Light yellow
Relative density(20
o
C)
1.21
1.19
1.18

Alumina(Al
2
O
3
)% >
12.0
10.0
8.0
32.0
29.0
28.0
Basicity(B)%
60-85
50-85
60-85
Insoluble substance in water %≤
0.2
0.5
1.0
0.5
1.0
1.5
PH value(1% aqueous solution)
3.5-5.0
3.5-5.0
Sulfate radical(SO
4
2-
)% ≤
3.5
9.8
Ammonia nitrogen(N)%≤
0.01
0.02
0.03
0.03
0.06
0.09
Arsenic(As)% ≤
0.0002
0.0005
Manganese(Mn)% ≤
0.0025
0.0050
0.0075
0.0075
0.010
0.0015
Chrome(Cr
4
2-
)% ≤
0.0005
0.0015
Hydrargyrum(Hg)% ≤
0.00002
0.00002
Lead(Pb)% ≤
0.001
0.003
Cadmium(Cd)% ≤
0.0002
0.0006

good quality polyacrylamide with high molecular weight

1.acrylamide
2.with high molecular weight
3.as water treatment chemical








Anionic Polyacrylamid

Description:
It is an important water-soluble compound with the properties of flocculation,thickening,cut-resisting,block-reducing dispersing,etc ..These properties are varied with different derivative ions.So it is widely used in the field of oil extraction,mining selection,coat washing,metallurgy,chemical,papermaking,sugar refining,pharmaceutical,environment protection,construction materials and agriculture.

Specification:
1.Appearance: white granular powder
2.Molecular weight(million): ≥18
3.Water insoluble(wt%): ≤0.1
4.Ion degree(%):≤5
5.Dissolving speed ( H): ≤ 2
6.Residual monomer (%): ≤ 0.1
7.Solid content(%): ≥ 88

Application:
It is mianly used in the field of oil extraction, mining selection ,coat washing, metallurgy, chemical, papermaking, sugar refining,pharmaceutical,environment protection,construction materials and agriculture.

About us :
Our company is well known as a reliable manufacture, mainly producing water treatment materials, such as Polyaluminium Chloride (PAC),PAM including APAM (Anionic Polyacrylamide) and CPAM (Cationic Polyacrylamide),
and activated carbon series ,i.e. Coconut shell activated carbon, nut shell activated carbon,
coal columnar activated and powder activated carbon .
If you need any of our products ,please feel free to contact us.
Thanks for your attention!

good quality polyacrylamide with high molecular weight

1.polyacrylamide
2.with high molecular weight
3.good flocculant



Anionic Polyacrylamid

Description:
The product is amde with the tecnoogy of pre-acrylamide alkaline hydrolysis and the procedure of granulation drying ,puverizing .The appearance feature of the product is white small particles or powder.
Specification:
Features:
1) Appearance: white granule
2) Molecular weight: 5 - 22 million minimum
3) Granule: 20 - 100 mesh
4) Solid content: 88% minimum
5) Hydrolyzing degree: 10 - 20%, 20 - 30% or 30 - 40%
6) Dissolving time: 2 hours maximum (10°C)
7) Insoluble: 0.5% maximum
8) Monomer free: 0.05% maximum

Molecular weight (million)
18-25
15-17
10-14
8-10
6-8
4-5
Solid content (%)
≥90
≥90
≥90
≥90
≥90
≥90
Hydrolysis degree (%)
20-30
15-30
15-30
10-30
8-15
8-10
Residual monomer (%)
0.05-0.1
0.05-0.1
0.05-0.1
0.05-0.1
0.05-0.1
0.05-0.1
Package:
25Kg Packed with woven bag innner-lined with PE bag or on the request of customers

Application:
Paper , leather and leather industry making industry, Drinking water purification,
Oil field , coal exploration
1. Paper , textile and leather making industry for the clarification of liquid caustic soda.
2. Drinking water purification, treatment of municipal sewage sludge, municipal solid waste and industrial effluent.
3.Oil field , coal exploration, geology, water conservancy,
4,Textile, carpet industry, sizing, quick-setting cement, synthetic resin coating.
sugar industry
5, Aquaculture feed additives and adhesives.


About us :

Our company is wellknown as a reliable manufacture, mainly producing water treatment materials. Such as Polyaluminium Chloride (PAC),PAM including (Anionic Polyacrylamide)APAM and CPAM (Cationic Polyacrylamide), and activated carbon series , i.e. Coconut shell activated carbon, nut shell activated carbon, coal columnar activated and powder activated carbon , with 2-shape: powder and columnar ,and materials: wood-based and coal-based.

good quality 1u-2u high purity light coated caco3

caco3
1.light calicum carbonate
2.improve products' quality in terms of increasing twisting strength, adhesiveness, resistance
caco3, coated light calicum carbonate

Developed by our company and made from high-quality Calcium Carbonate. By selected activating agent and coupling agent, together with surface treat, we designed various types for different application.
JSH-1 (General use)
Widely used in various plastic product. It can replace portion of resin to reduce cost. For PVC, it can be blended into PVC resin with ratio of 10-24. For PP/PE, by mixing and activating, mixing ratio can be up to 10-25%. There is no need to change equipment and technology.

JSH-2 (Plastic use)
Widely used in plastic products with effect of quality-improving and cost-reduction. Adding CaCo3 will greatly increase production output and improve the processing capacity. For rigid PVC products,it can accelerate gelation, enhance cold impact strength, eliminate plate out, improve surface gloss. For PP/HDPE, it can enhance impact strength, yield value and tenacity.

Item
Premium grade
A grade
CaCO3 %

98.2
98.0
PH value

8.5
8.0~10.5
Volatile at 105oC

0.21
0.50
HCL insoluble matter %

0.16
0.20
Fe content %

0.08
0.10
Mn content %

0.004
0.006
Residue 125μm %

0.006
0.010
Residue 45μm %

0.14
0.30
Whiteness

93.6
90.0
Oil absorption g/100g

58
70
Activation degree %

98
95
Appearance

White powder
White powder

Aluminium sulphate for industry

aluminium sulphate
CAS: 10043-01-3
Specification: Al2O3:>17%; Fe:<0.005%; PH:>3.0;
Aluminium sulphate for industry
Specification:Al
2
O
3
;15.8-17%min
;
Fe:0.5%max;PH:3.0min
;
Water Insolubles:0.15%max
Grain size:15mm max
(Flakys)
Use: Used in papermaking ,printing and dye , tanning leather , fire-fighting equipment , drug and wood preservation ,etc
Packing:PP/PE 50kg/bag

good quality Anion PAM/9003-05-8

It is used to better get rid of suspending solid, BOD and phosphate in wasted water.
Usage:
It is used to better get rid of suspending solid, BOD and phosphate in wasted water. Elimination rate of suspending materials and BOD can be respectively improved to 66% and 23% by adding 0.25 mg/L hydrated PAM in primary desilter of wasted water. Elimination rate of suspending materials and BOD can be respectively improved to 87% and 91% by adding 0.3 mg/L anion flocculating agent in secondary disposing desilter of wasted water and phosphorous removal effect can be improved from the original 35% to 91%. During disposal of drinking water and wasted water of life, it is used for clarity of surface water and washing wasted water, and adjustment of filtrate. It is used to clarity coal washing water, flotate tailing, filtrate fime coal, dehydration of tailing(residue), clarity floatate tailing, thicken and filtrate fine mine, clarity hot solution of potash and floatate and processing solution, clarify floatate tailing of blue john and barite and it is also used to clarity crude brine of salt process and mud dehydration, and to dispose reclaimed water of phosphate mineral.
Technical index:
(In-house standard Q/PLQ001-2005)
Mark No
Molecular weight
(10 thousand)
Assay of solid
Effective PH scope
Hydrolyzation degree %
Content of residual monomer %
A01
150
88%
1-14
20-25
≤0.05
A02
600
88%
1-14
23-25
≤0.05
A03
800
88%
1-14
23-25
≤0.05
A04
1000
88%
1-14
23-25
≤0.05
A05
1200
88%
1-14
25-27
≤0.05
A06
1500
88%
1-14
25-27
≤0.05
A07
1800
90%
1-14
25-27
≤0.05
A08
2000
90%
1-14
27-30
≤0.05
A09
2400
90%
1-14
27-30
≤0.05

good quality anionic polyacrylamide

1.Used in municipal waste, industrial waste
2.Water-soluble polymer
3.Papermaking and coal washing process


Anionic Polyacrylamide
1.Description:
Anionic PAM is copolymerized by acrylamide and acrylate monomer ,which is a super high molecular
weight polymer, that is, from 5 million minimum to 20 million. Different model can be used according
to the different application and the requirement of clients for the products performance.
Secifications :

Solid
Content(%)
Degree of
hydrolysis
(%)
Dissolving Time(min)
Molecular Weight
(million)
Appearance
≥88
26
≤60
5~22
White powder

Note:This is just for your reference,we can produce the products as per your demand.

3.

Application:
1. Industrial wastewater treatment. The effect is significant especially for wastewater with neutral or alkaline pH value, large suspended particles, high concentration and positive charge, such as wastewater of steel plants, electroplating plants, metallurgical plants and the coal washing plant.
2. Drinking water treatment. Use this product to deal with raw water, which has advantages of small dose, low-cost, no secondary pollution, etc.
3. Papermaking additive. It can used as dispersant of long fiber paper, dry strengthen
agent, retention and drainage agent and flocculant for papermaking wastewater,etc.

About us :
Our company is well-known as a reliable manufacture, mainly producing water treatment materials, such as Polyaluminium Chloride (PAC),PAM including (Anionic Polyacrylamide)APAM and CPAM (Cationic Polyacrylamide), and activated carbon series ,i.e. Coconut shell activated carbon, nut shell activated carbon, coal columnar activated and powder activated carbon .
We can assure that we provide best products, reasonable price and perfect
service,we hope to establish
a long cooperation relationship with you .

good quality anionic polyacrylamide

1.Product: polyacrylamide PAM
2.Usage: water treatment
3.Type: cationic PAM and anionic PAM
4 Manufaturer





Anionic Polyacrylamide
1.Description:
Polyacrylamide (PAM) is a unidimensional with polymer, easily dissolved in water, and its water solution is almost transparent thick fluid with noncorrosivity and innocuity, and not belong to dangerous goods. Solid PAM is featured of moisture abosorbility, flocculability, bindability, thickening ability and good stability.

Secifications :
Molecular Weight (million)
(adjustable)
Degree of Hydrolysis
(adjustable)
Solid Content%
Effective PH Range
Residual Monomer Content%
20-22
35-40

≥88%

7-14
≤0.05%
18-20
25-35
15-18
20-25
10-15
18-20
8-10
15-18
5-8
12-15
3-5
6-12

1)Appearance: White particles
2)Ion degrees: 35
3)Solid content%: 90 (2% fluctuation)
4)Cationic degree%: 35
5)0.3 aqueous solution viscosity MPA. S: 400-2030
6)Residual Monomers: ≤0.02
7)Dissolution time: ≤2h
8)Analysis of project/molecular weight(10, 000): ≥900




Note:This is just for your reference,we can produce the products as per your demand.

3.

Application:
1.Industrial waste water disposal
2.Drinking water treatment
3.Recovery of lost starch and alcohol in starch factory/alcohol factory
4.The industrial sewage processes
5.Paper industry
6.Helps keeps filter aid
7.Intensifier may enhance
8.Dispersing agent
9.Flocculant
10.Oil field domain
11.In three extraction applications
12.Mining and metallurgy domain


About us :
Our company is well-known as a reliable manufacture, mainly producing water treatment materials, such as Polyaluminium Chloride (PAC),PAM including (Anionic Polyacrylamide)APAM and CPAM (Cationic Polyacrylamide), and activated carbon series ,i.e. Coconut shell activated carbon, nut shell activated carbon, coal columnar activated and powder activated carbon .
We can assure that we provide best products, reasonable price and perfect service,we hope to establish
a long cooperation relationship with you .

good quality coal based granular activated carbon

coal based granular activated carbon
a.remove the odor,and the smell
b.purify the water
Granular activated carbon

mainly used to purify water; it can not only remove the odor and heterochromatic color in water, but also remove the organic or inorganic impurities, to achieve the purpose of sterilization.
Uses: mainly used in water treatment in cold drinks, food industry, pharmaceutical industry, power plants and other industries of water, but also for the depth of industrial water and wastewater purification, can also be used in toxic gas purification, gas treatment, and solvent recovery and so on.
welcome to make a purchase!
thank you

Item
Indicators
Size
8-24 mesh
mg/g Iodine mg / g
800-1000
Strength %
≥94
Dry by degrees %
≤ 10
Burn residue %
≤ 5
g/cm3 Filling the proportion g/cm3
0.35-0.45
PH Value
6-8
Ml methylene blue decolorization ability
≥10

good quality polyacrylamide flocculants

polyacrylamide
1.best price with frist grade PAM
2.high molecular
3.prompt delivery
4.used for petroleum drilling
polyacrylamide
Secifications of
PAM:

1) Appearance: white granule
2) Molecular weight: 5 - 22 million minimum
3) Granule: 20 - 100 mesh
4) Solid content: 88% minimum
5) Hydrolyzing degree: 10 - 20%, 20 - 30% or 30 - 40%
6) Dissolving time: 2 hours maximum (10°C)
7) Insoluble: 0.5% maximum
8) Monomer free: 0.05% maximum

Polyacrylamide
called
PAM
, commonly known as flocculants or cohesion agent, sub-cation, anion type, the molecular weight between 400-1800 million, the product appearance is white or slightly yellow powder, soluble in water. In particular, acidic water, acid and organic matter and the red mud suspension turbidity from flocculation sedimentation and separation of the role of liquid mud, use less, water and low cost, flocculant can not be replaced by other products.

good quality polyaluminium chloride purifying water treatment /PAC

purifying water treatment /PAC
1.Better water adaptation
2.Stable precipitation effect
3.Factory price
good quality polyaluminium chloride purifying water treatment /PAC

1.product name:
Polyaluminium Chloride
2.molecular formula: [AL2(OH)nCL6-n](n 1-5.m≤10)
3.physicochemical property: yellow or white solid powder
4.product relative standard: GB/T 15892-2009

good selling Sodium Gluconate

1.manufacturer of Sodium Gluconate
2.Sodium Gluconate as Detergent
3.sodium gluconate in industrial grade
4.CAS 527-07-1
Product Name :
Sodium gluconate
Brief
Alias : sodium gluconate
Molecular formula : C
6
H
11
O
7
Na
Molecular weight : 218.14
Appearance: white/yellow crystal or powder
Specification

Properties
Specifications
Grade
Tech Grade
Description
White or Yellowish Crystal Powder
Identification
Meets the requirements
Loss on drying, %
0.5 Max
Purity,%
98.0Min
Reducing Substances,%
0.7Max
Heavy Metal(Pb), μg/g
10Max
Sulfate, μg/g
0.05 Max
Chloride, μg/g
0.07 Max
Lead, μg/g
2Max
Arsenic, μg/g
2 Max
PH
6.2-7.8

good-effection flocculant PAM(IVY)

PAM:
1.Cationic Polyacrylamide
2.Polymer
3.Wastewater Treatment Chemical
PAM:

Polyacrylamide is a water soluble high-molecular polymer with a wide scope of usage.
uniform granule,good solubility
Specification
Cationic Polyacrylamide
ITEM
MOLECULAR WEIGHT
CATIONIC DEGREE
C8015
MEDIUM HIGH
LOW
C8020
MEDIUM HIGH
MEDIUM LOW
C8030
MEDIUM HIGH
MEDIUM HIGH
C8040
MEDIUM HIGH
HIGH
C8050
MEDIUM HIGH
ULTRA HIGH
C1205
LOW
HIGH
C1260
HIGH
ULTRA HIGH
C6040
MEDIUM
MEDIUM HIGH
C6050
HIGH
MEDIUM

good-effection flocculant PAM(IVY)

PAM
1.Cationic Polyacrylamide
2.Polymer
3.Wastewater Treatment Chemical
PAM:

Polyacrylamide is a water soluble high-molecular polymer with a wide scope of usage.
uniform granule,good solubility
Specification
Cationic Polyacrylamide
ITEM
MOLECULAR WEIGHT
CATIONIC DEGREE
C8015
MEDIUM HIGH
LOW
C8020
MEDIUM HIGH
MEDIUM LOW
C8030
MEDIUM HIGH
MEDIUM HIGH
C8040
MEDIUM HIGH
HIGH
C8050
MEDIUM HIGH
ULTRA HIGH
C1205
LOW
HIGH
C1260
HIGH
ULTRA HIGH
C6040
MEDIUM
MEDIUM HIGH
C6050
HIGH
MEDIUM

granular activated carbon from coal for catalyst carrier

granular activated carbon from coal for catalyst carrier
1.abrasion resistance
2.high adsorption quality
3.for absorption


granular activated carbon from coal for catalyst carrier


ITEM
ED050-A
ED050-B
ED051-A
ED051-B
Mesh 6-12m % min
90
90
90
90
Abrasive resistance % min
95
95
95
95
Iodine Value mg/g min
1000
900
1000
900
Dry Decrement % max
10
10
10
10
Filling Density g/ml
0.5-0.55
0.5-0.55
0.45-0.5
0.45-0.5

Functions:
1.it's made of excellent anthracite and advanced process,high adsorption ability
2.recycle of all kinds of chemical fluxes
3.purification of air and poisonous gas,drinking water
4.air filtration for air conditioning system
5.high machinery capacity,regeneration,low cost

Aluminium sulphate for industry

aluminium sulphate
water purity .
Specification: Al2O3:>17%; Fe:<0.005%; PH:>3.0;
aluminium sulphate
CAS: 10043-01-3
Specification: Al
2
O
3
:>17%; Fe:<0.005%; PH:>3.0;
Insoluble matter in water:
<0.1%, As:<0.0005%; Pb:<0.002%
Granularity:
<
15mm
Use:
treatment of drinking water and industrial water, high-grade paper making and high-grade titanium pigment production.
Quality standard :
Item
Technical Requirement/ Index (Grade A)
Technical Requirement/ Index (Qualified Product)
AL
2
O
3
%>
17.00
15.80
Fe <
0.005
0.007
Insoluble matter in water %<
0.1
0.1
PH (1% solution) %>
3.0
3.0
Granularity mm
15
15

granular activated carbon used in purification system

1.coal-based granular activated carbon
2.With high-quality coal from Taixi
3.developed pore structure
4.high filtration rate
Product Name:
Granular
Activated Carbon Used in Purification System
Concentrated on it,we know more about it.

1.Material:
The granular coal activated carbon are produced and refined through shape ,carbonization and activation with qualified coal from TaiXi as raw material.



2.Strengths:
large specific surface area,developed pore structure, rational pore scattered,mighty adsorptive properties; equal particle scattered,high hardness













3.Applications:
water treatment, gas purification, solvent recovery ,chemical catalyst and carries, and desulphurization of flue gas .











4.Specs:
a.
Model No.
Size
diameter
Hardness
%
Iodine
(mg/g)
Ash
(%)
Moisture
(%)
TH-415
1.5mm
90min
900-1050
15max
15max

b.
Model No.
Size
daimeter
Hardness
%
Iodine
(mg/g)
Ash
%
Moisture
%
TH-440
4.0mm
90
900-1050
15max
15max



5.Picture of sample:


diameter

1.5mm


diameter 4.0mm




6.Certificate:
ISO9001:2008
6.Packing:
Related Information
1. The activated carbon is manufactured from selected grades of bituminous coal to produce adurable granular product capable of withstanding the abrasion associated with repeated backwashing,air scouring,and hydraulic transport.
2.The bituminous coal provides higher hardness relative to other raw materials reducing the generation of fines and product losses during backwashing
3.Coal is pulverized and reagglomrated with suitable binder:pore structure provides a product with a significant volume of high energy pores as measured by the trace capacity number,while still maintaining a high iodine number.
4.Coal based activated carbon has a high density resulting in a greater adsorption capacity per filter volume.Wets readily,and does not float,thus minimizing loss during backwash operations.Creates optimal transport paths for faster adsorption.

granular activated carbon

Coal based granular activated carbon
Particle size: 8X30
Iodine No.: 800-1200mg/g (ASTM)
Certificate:ISO9001:2008Processing:This carbon is made from high quility anthracite under strictly controlled conditions-- grind into powder-- use coal tar to bind powder-- extrude into cylindrical particles-- carbonize- activated-- break into necessary granular sizes.Feature:The carbon has high mechanical strength, low ash content. Hence low cost since no need of acid washing for some certain uses.
Coal based granular activated carbon
Particle size: 8X30
Iodine No.: 800-1200mg/g (ASTM)

granular activated carbon

A) The crevice is developed
B) With the bigger surface area
C) Adsorptive capacity
D) The mechanical strength is high
Coconut shell based activated carbon series of products are made from strictly selected coconut shells or apricot shells using special technology. They have many advantages, such as, large surface area, developed pore structure, good mechanical strength, good adsorption capacity, high recovery rate, etc. They can be divided into three categories based on state, they are amorphous granular, small particles and powdery. They are germicidal, bacteriostatic and antipyretic, and they can remove odor and the small amount of toxic and harmful substances in water. Water purified using this series of activated carbon products can be seen as drinking water. They are widely used in water purifying in drinking water, food, beverage, pharmacy, electron and other industries. They are also the best activated carbon products in core-filled, water-purification equipment, catalytic carrier, air purification, gas separation and metallurgical industry.

granular activated carbon

A) Huge specific surface area
B) Developed pore structure,
C) Highly developed porous structure
Coconut shell based activated carbon series of products are made from strictly selected coconut shells or apricot shells using special technology. They have many advantages, such as, large surface area, developed pore structure, good mechanical strength, good adsorption capacity, high recovery rate, etc. They can be divided into three categories based on state, they are amorphous granular, small particles and powdery. They are germicidal, bacteriostatic and antipyretic, and they can remove odor and the small amount of toxic and harmful substances in water. Water purified using this series of activated carbon products can be seen as drinking water. They are widely used in water purifying in drinking water, food, beverage, pharmacy, electron and other industries. They are also the best activated carbon products in core-filled, water-purification equipment, catalytic carrier, air purification, gas separation and metallurgical industry.

granular activated carbon

Coal based granular activated carbon
Particle size: 8X30
Iodine No.: 800-1200mg/g (ASTM)
Processing:This carbon is made from high quility anthracite under strictly controlled conditions-- grind into powder-- use coal tar to bind powder-- extrude into cylindrical particles-- carbonize- activated-- break into necessary granular sizes.Feature:The carbon has high mechanical strength, low ash content. Hence low cost since no need of acid washing for some certain uses.
Coal based granular activated carbon
Particle size: 8X30
Iodine No.: 800-1200mg/g (ASTM)

granular activated carbon

TYPE:A/B-G activated carbon
Developed porous structure,large specific surface area (esp large micropore volume), great hardness

Size
(mesh)
Hardness
(%)
Moisture
(%)
Ash(%)
M.B.Number
(mg/g)
Iodine Number(mg/g)
Bulk Density(g/L)
CTC (%)
Applications
8-16
93
5
8-15
190
1050
380-480
65
Air purification
Water purification
8-30
93
5
8-15
190
1050
380-480
65
4-8
90
5
8-15
190
1050
380-480
65
Catalyst carrier
Water purification
Adsorption process in liquid
8-16
95
5
8-13
180
1000
400-500
60
8-30
95
5
8-12
170
950
400-520
55
12-30
93
5
6-13
180
1000
400-520
60
12-40
93
5
6-12
170
950
400-520
55
4-8
93
5
6-13
180
1000
380-500
60
Air purification,
Industrial water treatment,
Decolorization,
Waste effluent treatment
4-10
93
5
6-13
180
1000
380-500
60
8-30
95
5
6-12
160
950
400-520
55
12-30
95
5
6-12
160
950
400-520
55
12-40
95
5
6-12
150
900
400-520
55

Our granular activated carbon has the above spec. And any specification falls between the ranges above could be reached and any special requirement is negotiable!

granular activated carbon

TYPE:A/B-G activated carbon
Developed porous structure,large specific surface area (esp large micropore volume), great hardness
Certificate :ISO9001:2008

Size
(mesh)
Hardness
(%)
Moisture
(%)
Ash(%)
M.B.Number
(mg/g)
Iodine Number(mg/g)
Bulk Density(g/L)
CTC (%)
Applications
8-16
93
5
8-15
190
1050
380-480
65
Air purification
Water purification
8-30
93
5
8-15
190
1050
380-480
65
4-8
90
5
8-15
190
1050
380-480
65
Catalyst carrier
Water purification
Adsorption process in liquid
8-16
95
5
8-13
180
1000
400-500
60
8-30
95
5
8-12
170
950
400-520
55
12-30
93
5
6-13
180
1000
400-520
60
12-40
93
5
6-12
170
950
400-520
55
4-8
93
5
6-13
180
1000
380-500
60
Air purification,
Industrial water treatment,
Decolorization,
Waste effluent treatment
4-10
93
5
6-13
180
1000
380-500
60
8-30
95
5
6-12
160
950
400-520
55
12-30
95
5
6-12
160
950
400-520
55
12-40
95
5
6-12
150
900
400-520
55

Our granular activated carbon has the above spec. And any specification falls between the ranges above could be reached and any special requirement is negotiable!

granular activated carbon

Coal based granular activated carbon
Particle size: 8X30
Iodine No.: 800-1200mg/g (ASTM)
Processing:This carbon is made from high quility anthracite under strictly controlled conditions-- grind into powder-- use coal tar to bind powder-- extrude into cylindrical particles-- carbonize- activated-- break into necessary granular sizes.Feature:The carbon has high mechanical strength, low ash content. Hence low cost since no need of acid washing for some certain uses.
Coal based granular activated carbon
Particle size: 8X30
Iodine No.: 800-1200mg/g (ASTM)

granular and pellet activated carbon

GB Test standard of activated carbon in China is drafted by our factory.
Certificate: NSF.
Management: ISO9001.
BV APPROVAL.

"XINHUA"brand activated carbon is made from strictly selected coal by using special technology. It is known as highly developed porous structure and large specific surface, especially micropore volume, high hardness, wear and impact resistance, and easy regeration. It has high capacity on the adsorption of organic solutes, free chlorine and harmful gas in air.
Our factory, SHANXI XINHUA CHEMICAL FACTORY, is the larggest coal-based activated carbon factory in Asia. Activated carbon is certified by NSF and ISO9001-2000. The test standard of activated carbon in China is drafted by our factory engineers. "XINHUA" activated carbon is widely used in many field in the world.

granulated activated carbon

TYPE:A/B-G activated carbon
Developed porous structure,large specific surface area (esp large micropore volume), great hardness

Size
(mesh)
Hardness
(%)
Moisture
(%)
Ash(%)
M.B.Number
(mg/g)
Iodine Number(mg/g)
Bulk Density(g/L)
CTC (%)
Applications
8-16
93
5
8-15
190
1050
380-480
65
Air purification
Water purification
8-30
93
5
8-15
190
1050
380-480
65
4-8
90
5
8-15
190
1050
380-480
65
Catalyst carrier
Water purification
Adsorption process in liquid
8-16
95
5
8-13
180
1000
400-500
60
8-30
95
5
8-12
170
950
400-520
55
12-30
93
5
6-13
180
1000
400-520
60
12-40
93
5
6-12
170
950
400-520
55
4-8
93
5
6-13
180
1000
380-500
60
Air purification,
Industrial water treatment,
Decolorization,
Waste effluent treatment
4-10
93
5
6-13
180
1000
380-500
60
8-30
95
5
6-12
160
950
400-520
55
12-30
95
5
6-12
160
950
400-520
55
12-40
95
5
6-12
150
900
400-520
55

Our granular activated carbon has the above spec. And any specification falls between the ranges above could be reached and any special requirement is negotiable!

Aluminium sulphate for water treatment

Aluminium sulphate for water treatment
CAS: 10043-01-3
Specification: Al2O3:>17%; Fe:<0.005%; PH:>3.0;
Aluminium sulphate for water treatment
CAS: 10043-01-3
Specification: Al
2
O
3
:>17%; Fe:<0.005%; PH:>3.0;
Insoluble matter in water:
<0.1%, As:<0.0005%; Pb:<0.002%
Granularity:
<
15mm
Use:
treatment of drinking water and industrial water, high-grade paper making and high-grade titanium pigment production.
Quality standard :
Item
Technical Requirement/ Index (Grade A)
Technical Requirement/ Index (Qualified Product)
AL
2
O
3
%>
17.00
15.80
Fe <
0.005
0.007
Insoluble matter in water %<
0.1
0.1
PH (1% solution) %>
3.0
3.0
Granularity mm
15
15

granule activated carbon for air purification YMT-997-998

1.high specific surface area,high adsorption quality
2.high abrasion resistance
3. competitive price
Analysis project
Test data
Iodine value mg/g ≥
900
Intensity % ≥
90
methylene blue value mg/g
140
Particle size(2.36mm-0.55mm) % ≥
95
Loss on drying % ≤
10
PH
5.5-6.5
Ash % ≤
6-12
Moisture %
3-5
Any specification falls between the ranges above could be reached and any special requirement is negotiable!
Functions:
1. Walnut shell, coconut shells, apricot shell based
YMT-997 series includes YMT-997Y, YMT-997T, YMT-997H
YMT-998 series includes YMT-998A, YMT-998B

2.large specific surface area, high adsorption quality
3. .used for decoloration in glucose and sugar industry,, sorbic acid, amino acid, citric acid decoloration, food and beverage decoloration, waste water decoloration and removing organic matter,medical,water treatment and air purification ,recovery of benzene, toluene, xylene, ethanol, ethers, gasoline, chloroform, carbon tetrachloride, etc.

Any question you are welcomed to Contact us. It is our responsibility to meet your needs and efficiently serve you.
Waiting for your early reply!
BEST REGARDS!

great ! Active Carbon

1.GOOD QUANLITY AND BEST PRICE ! SGS,CIQ,ISO INSPECTION
2.Carbon Content: Not less then 90%
Specifications for Activated Carbon:
Uniformity Co-Efficient:<= 1.25
Iodine Value:850
Particle Density:, Wated in water, g/cc:1.3-1.4
Effective Size( MM) :0.8-0.9
Moisture Content:5% ( Max)
Ash Content:8% ( Max)
Bulk Density( Kg/Cu.M):Not Less then 400
Mean Particular Diameter (MM):1.2-1.4
Carbon Content: Not less then 90%
Usage:
It is an essential industry product for sugar, medicine, food, fat, oil refinery, environmental protection, water treatment, organic acid, inorganic material, national defense, etc. And it also be catalyst. It has different forms of granule, pellet, cylinder and powder.

high effective Corrosion Inhibitor Intermediate chemical solvent

suitable for antisepsis of waste water reinjection equipment in oil recovery plant.
Corrosion Inhibitor Intermediate

1. Introduction
Normally, imidazoline is the corrosion ingredient of corrosion inhibitor, while we use bis-imidazoline as corrosion ingredients. There are two pairs of imidazoline molecule pentacyclic group and two adsorption groups in bis-inidazoline, so its adsorption is higher than the imidazoline.
2. Technical data sheet
Items
Index
Appearance
Yellow to red-brown liquid
PH value
9.0-11.0
Active ingredient(%)
≥55
Solubility
Miscible with water
Density(g/cm3)
1.00-1.15
3. Method and Use
a. Mix it with water according to 3:7 ratios,you can get corrosion inhibitor products.
b. Suitable for antisepsis of waste water reinjection equipment in oil recovery plant and atmospheric pressure, catalytic equipment in refinery.
c. Reference dosage 30-50ppm. Its inhibition rate is higher than 85%, corrosion rate is lower than 0.05mm / a. Add 30ppm in refinery, the iron ions can be reduced to below 2ppm.
4. Packing and storage
a. Net weight 200KG / drum.
b. Valid for one year.

high effective Corrosion Inhibitor Intermediate chemical solvent

suitable for antisepsis of waste water reinjection equipment in oil recovery plant.
Corrosion Inhibitor Intermediate

1. Introduction
Normally, imidazoline is the corrosion ingredient of corrosion inhibitor, while we use bis-imidazoline as corrosion ingredients. There are two pairs of imidazoline molecule pentacyclic group and two adsorption groups in bis-inidazoline, so its adsorption is higher than the imidazoline.
2. Technical data sheet
Items
Index
Appearance
Yellow to red-brown liquid
PH value
9.0-11.0
Active ingredient(%)
≥55
Solubility
Miscible with water
Density(g/cm3)
1.00-1.15
3. Method and Use
a. Mix it with water according to 3:7 ratios,you can get corrosion inhibitor products.
b. Suitable for antisepsis of waste water reinjection equipment in oil recovery plant and atmospheric pressure, catalytic equipment in refinery.
c. Reference dosage 30-50ppm. Its inhibition rate is higher than 85%, corrosion rate is lower than 0.05mm / a. Add 30ppm in refinery, the iron ions can be reduced to below 2ppm.
4. Packing and storage
a. Net weight 200KG / drum.
b. Valid for one year.

high effective Corrosion Inhibitor Intermediate chemical solvent

suitable for antisepsis of waste water reinjection equipment in oil recovery plant.
Corrosion Inhibitor Intermediate

1. Introduction
Normally, imidazoline is the corrosion ingredient of corrosion inhibitor, while we use bis-imidazoline as corrosion ingredients. There are two pairs of imidazoline molecule pentacyclic group and two adsorption groups in bis-inidazoline, so its adsorption is higher than the imidazoline.
2. Technical data sheet
Items
Index
Appearance
Yellow to red-brown liquid
PH value
9.0-11.0
Active ingredient(%)
≥55
Solubility
Miscible with water
Density(g/cm3)
1.00-1.15
3. Method and Use
a. Mix it with water according to 3:7 ratios,you can get corrosion inhibitor products.
b. Suitable for antisepsis of waste water reinjection equipment in oil recovery plant and atmospheric pressure, catalytic equipment in refinery.
c. Reference dosage 30-50ppm. Its inhibition rate is higher than 85%, corrosion rate is lower than 0.05mm / a. Add 30ppm in refinery, the iron ions can be reduced to below 2ppm.
4. Packing and storage
a. Net weight 200KG / drum.
b. Valid for one year.

high effective Corrosion Inhibitor Intermediate chemical solvent

suitable for antisepsis of waste water reinjection equipment in oil recovery plant.
Corrosion Inhibitor Intermediate

1. Introduction
Normally, imidazoline is the corrosion ingredient of corrosion inhibitor, while we use bis-imidazoline as corrosion ingredients. There are two pairs of imidazoline molecule pentacyclic group and two adsorption groups in bis-inidazoline, so its adsorption is higher than the imidazoline.
2. Technical data sheet
Items
Index
Appearance
Yellow to red-brown liquid
PH value
9.0-11.0
Active ingredient(%)
≥55
Solubility
Miscible with water
Density(g/cm3)
1.00-1.15
3. Method and Use
a. Mix it with water according to 3:7 ratios,you can get corrosion inhibitor products.
b. Suitable for antisepsis of waste water reinjection equipment in oil recovery plant and atmospheric pressure, catalytic equipment in refinery.
c. Reference dosage 30-50ppm. Its inhibition rate is higher than 85%, corrosion rate is lower than 0.05mm / a. Add 30ppm in refinery, the iron ions can be reduced to below 2ppm.
4. Packing and storage
a. Net weight 200KG / drum.
b. Valid for one year.

high effective Corrosion Inhibitor Intermediate chemical solvents

suitable for antisepsis of waste water reinjection equipment in oil recovery plant.
Corrosion Inhibitor Intermediate

1. Introduction
Normally, imidazoline is the corrosion ingredient of corrosion inhibitor, while we use bis-imidazoline as corrosion ingredients. There are two pairs of imidazoline molecule pentacyclic group and two adsorption groups in bis-inidazoline, so its adsorption is higher than the imidazoline.
2. Technical data sheet
Items
Index
Appearance
Yellow to red-brown liquid
PH value
9.0-11.0
Active ingredient(%)
≥55
Solubility
Miscible with water
Density(g/cm3)
1.00-1.15
3. Method and Use
a. Mix it with water according to 3:7 ratios,you can get corrosion inhibitor products.
b. Suitable for antisepsis of waste water reinjection equipment in oil recovery plant and atmospheric pressure, catalytic equipment in refinery.
c. Reference dosage 30-50ppm. Its inhibition rate is higher than 85%, corrosion rate is lower than 0.05mm / a. Add 30ppm in refinery, the iron ions can be reduced to below 2ppm.
4. Packing and storage
a. Net weight 200KG / drum.
b. Valid for one year.

high effective Corrosion Inhibitor Intermediate organic solvents

suitable for antisepsis of waste water reinjection equipment in oil recovery plant.
Corrosion Inhibitor Intermediate

1. Introduction
Normally, imidazoline is the corrosion ingredient of corrosion inhibitor, while we use bis-imidazoline as corrosion ingredients. There are two pairs of imidazoline molecule pentacyclic group and two adsorption groups in bis-inidazoline, so its adsorption is higher than the imidazoline.
2. Technical data sheet
Items
Index
Appearance
Yellow to red-brown liquid
PH value
9.0-11.0
Active ingredient(%)
≥55
Solubility
Miscible with water
Density(g/cm3)
1.00-1.15
3. Method and Use
a. Mix it with water according to 3:7 ratios,you can get corrosion inhibitor products.
b. Suitable for antisepsis of waste water reinjection equipment in oil recovery plant and atmospheric pressure, catalytic equipment in refinery.
c. Reference dosage 30-50ppm. Its inhibition rate is higher than 85%, corrosion rate is lower than 0.05mm / a. Add 30ppm in refinery, the iron ions can be reduced to below 2ppm.
4. Packing and storage
a. Net weight 200KG / drum.
b. Valid for one year.

high efficient CMC--carboxymethyl cellulose

Carboxymethyl cellulose
Usage:paint dyestuffs,paper dyestuffs,textile dyestuffs.oilfield,mining industry,drilling industry.
CMC
Properties
1.Thickening:CMC can produce high viscosity at low concentration.It also acts as lubricant.
2.Water retention:CMC is a water binder,helps incerase shelf life of food.
3.Suspending aid:CMC acts as emulsifier and suspension stabilizer,particularly in icings to contro ic crystal size.
4.Film forming:CMC can produce a film on the surface of fried food,eg.instant noodle,and prevent absorption of excessive vegetable oil.
5.Chemical stability:CMC is resistant to heat,light,mold and commonly used chemicals.
6.Physiologically inert:CMC as a food additive has no caloric value and can not be metabolized.
Characteristics
A. Finely distributed molecular weight,
B. High resistance to acid.
C. High resistance to salt,
D. High transparency,low free fibers.
E. Low gel.
Usage:
1. Printing & dyeing grade CMC featrues:
* good stability of viscosity,*good distributiion uniformity of degree of substitution,*good fluidity of solution,*high water scrubbing rate.
2. Oil drilling grade
Petroleum grade product features:
*high degree of substitution,good uniformity of substitution,*high transparency,viscosity and water loss can be controlled,*suitable for fresh water,sea water,satrated brine slurry,*stabilize soft soil structure,prevent collapse of wall of a well.*can improve mud-making volum,reduce filteration loss.* has excellent performance in drilling of oil.
3 Battery grade
*excellent hydrophilicity,*stable viscosity,high adhesive force,*good transparency and fluidity of aqueous solution,*low metal content.
4 Paper--making grade
CMC is a high--efficiency paper--making auxiliary,and features good moisture retention,dispersibility
CMC's application in paper--making industry
(1) pigment coating
* Control and regulate the rheology of coatings and dispersibility of pigments.
* Get pseudoplasticity of coatings.
* Improve the moisture retention of coatings.
* Has excellent film forming property.
(2) Intracytoplasm adding
* Improve jordaning efficiency,shorten pulping time.
* Regulate electric potential of pulp.
* Improve the retention rate of additives,fillers etc.
(3) Top sizing
* Has excellent rheology and film forming property.
* Improve the brightness and gloss of paper.
*Enhance the stiffness and smoothness of paper.
* Increase the surface strength and abrasion resistance of paper.

high efficient cationic PAM/Polyacrylamide

PAM:
1,best quality & best price
2,supply by factory
3,Polyacrylamide purity 100%
4,prompt delivery
Polyacrylamide PAM

Polyacrylamide called PAM
, commonly known as flocculants or cohesion agent, sub-cation, anion type, the molecular weight between 400-1800 million, the product appearance is white or slightly yellow powder, soluble in water. In particular, acidic water, acid and organic matter and the red mud suspension turbidity from flocculation sedimentation and separation of the role of liquid mud, use less, water and low cost, flocculant can not be replaced by other products.

Features of
PAM:

1) Appearance: white granule
2) Molecular weight: 5 - 22 million minimum
3) Granule: 20 - 100 mesh
4) Solid content: 88% minimum
5) Hydrolyzing degree: 10 - 20%, 20 - 30% or 30 - 40%
6) Dissolving time: 2 hours maximum (10°C)
7) Insoluble: 0.5% maximum
8) Monomer free: 0.05% maximum

We always do the best quality of
PAM
.

1240 coconut activated carbon

CTC: 50-90min high mechanical strength , low ash content , made from high quality anthracite under strictly controll condition.
This carbon is made from high quality coconut shell under strictly controlled conditions, after carbonization and activation, crush into necessary granular sizes. The carbon has high mechanical strength, low ash content . Also the carbon has high rate of adsorption , low bed resistance , readily regeneration and repeated utilization . The carbon is suitable for sugar decoloration, food processing, medicine, gold extraction etc.

Aluminium.Sulfate.non-ferrous

When kept is the air for a long time, dewater temperature is 86.5,dissolved in water, acid , alkaline, not dissolved in alcohol
Use: Mainly used for high grade Titanium pigments, covering films , coating and high grade paper, and industrial use od water, leather-making, printing , petro-auxiliary, and concrete.

high efficient cationic polyacrylamide

1.Good flocculation for water treatment
2.Used in water treatment,papermaking
3.Also used on textil









Cation polyacrylamide(PAM)
Description:
Cationic polyacrylamide is a white granule and it is a linear high molecular compound which is soluble in water. It is nontoxic, odorless and hygroscopic. Its outstanding feature is the high hydrophilicity
which enables it dissolves in water at any ratio while insolubilizes in organic solvents like ethanol and acetone. The active group with positive charge on the molecular chain has excellent effect of folcculation.
Different models of products can be chosen according to the properties of sludge. This product can clarify the solution and separate the solid and liquid rapidly by absorbing the solid particles suspending in
sewage which can make the particles agglomerate into large flocculate through bridging between particles or charge neutralization. Therefore, this product has a low application dosage, high level of dehydration
efficiency and low level of water content in sluge.


Applications

1. As a flocculating agent, mainly used in industrial solid-liquid separation process, including settlement, to clarify, concentrate and sludge dewatering processes, applications for all the major sectors are: urban sewage treatment, paper, food processing, petrochemical, metallurgical, processing, dyeing and the sugar and all kinds of industrial wastewater treatment.

2. In the paper industry can be used as dry strength agents, retention agents,filter aids,can be greatly improved as paper quality, enhance the physical strength of paper and reduce the loss of fiber or filler to accelerate the treatment, since enhanced retention to help filter effect can also be used in the treatment of white water at the same time, in the drinking process can play a significant flocculation.

3. Fiber cement (asbestos - cement products) will enable the forming of asbestos - cement products improved drainage; insulation board in, and fiber additives can increase the binding capacity.

4.In the mining, coal mining industry can be used for
waste water, coal washing waste water clarifier.

5. Can be used for dyeing wastewater, leather wastewater, oily wastewater treatment, so that turbidity removal, decolorization, to achieve the emission standards.

6. For the tap water in the river water treatment plant flocculants.
Index :

Name
MolecularWeight(ten thousand)
Ion degrees(%)
Solid Content(%)
remnant
list %
hydrolysis
Dissolve
Time
(min)
CPAM
------ ----
10-50
≥90
≤0.05
20-25
≤40
APAM
600-2000
--- --
≥90
≤0.05
20-30
≤60

The above technical indicators are just for your reference,we can manufacture according to your require.


About us :
Our company is well-known as a reliable manufacture, mainly producing water treatment
materials, such as Polyaluminium Chloride (PAC),PAM including
(Anionic Polyacrylamide)APAM and CPAM (Cationic Polyacrylamide), and activated carbon series ,i.e.
Coconut shell activated carbon, nut shell activated carbon, coal columnar
activated and powder activated carbon .
We can assure that we provide best products, reasonable price and perfect
service,we hope to establish a long cooperation relationship with you .
Thanks for your attention!

high efficient pure paper-making dispersant

Paper making dispersant: Low substitutability,high efficiency,reduce the unit consumption.With high quality and good price.so on





Paper-making dispersant
name
model
molecular weight
dispersant
Japan A110
2000
dispersant
Korea 4045
1800
dispersant
Ciba DP-5
2000
dispersant
Ciba 1275
1800
dispersant
France 3630
1600
dispersant
France 3530
1600
dispersant
France 926
1400
dispersant
Made in China
1800
dispersant
Made in China
1600
dispersant
Made in China
1500
PEO
SCAS

Note: each packet 25 kg, packaging by plastic woven bag lined with moistureproof film.Supplier burdens the packing charge.
Product description
Product name
dispersant
Product appearance
White footloose particles

unit
index
Test method
Solid content
%
>87%
QC-100A
Residual monomers
%
<0.1000
QC-200A
Theory anionic degrees
(molal %)
25-30%
QC-800A
insoluble
%
<2.00%
QC-151A
UL viscosity
CPS
5.40-6.20
QC-400A
PH(5g/L)

7+/-1
QC-130A
granularity>10meshes <100meshes
%
<2 <10

Solution appearance

Transparent or small white particles


Poly (PEO) executive standard
appearance
White powder(>15 meshes)
softening point
65°C~67°C
density
Apparent dencity 0.3~0.4(Kg/L)
True view density 1.15-1.22(Kg/L)
PH value
6-8(0.5%water solution)
purity
>99.6%
Packaging form: 10KG into corrugated cardboard box
This product is papermaking retention aid and filtration aid agent, its appearance is white tiny granules. With economic performance, easy to use, prompting fiber stretching dispersion, evenly into paper of excellent features. This product is a water soluble organic polymer, it is soluble in water and formation of high viscosity fluid, with low substitutability it can promote papermaking fiber into good dispersion and excellent paper molding effect, mainly is suitable for the produce of high-grade toilet paper, napkin, such as family life paper etc.
Character:
use simple and convenient, soluble in water.
Low substitutability, high efficiency, reduce the unit consumption, increase production.
Excellent paper molding results, it has remarkable effectiveness in viscosity and resistance to filter water aspects , promote fiber dispersion, make more thin sheets of paper, downy and uniform.
With other reagent have excellent mutual solubility.

high intensity coconut shell activated carbon for water treatment

A)Golden Activated Carbon
B)Iodine Value 1000mg/g min
C)Hardness 70% min
D)Factory direct selling

Nut

high intensity coconut shell activated carbon for water treatment
The products have developed pore structure, huge specific surface area, strong adsorptive properties and high intensity, widely used in treatment of kinds of water and extracting gold. They are used for decolorizing and reefing of monosodium, citric acid and wine, grease and oil.
The nut granular activated carbons are refined through carbonization and activation with apricot nutshell as raw material.

Indicator species
project
Coconut shell activated carbon
Apricot shell activated carbon
Project indicator species
Coconut shell activated carbon
Apricot shell activated carbon
Size


Iodine (mg / g) ≥
1000
900
≥ 24 mesh
≤ 1
≤ 1
Stupid adsorption value (mg / g) ≥
400
400
28-42
≥ 82
≥ 82
Acetic acid adsorption value (mg / g) ≥
500
500
≤ 48 mesh
≤5
≤5
Zinc acetate adsorption value (mg / g) ≥
7
6
Average particle size (mm)
0.44-0.49
0.44-0.49
Minimum flow of velocity (m / sec)
9-12.5
9-12.5
Strength (ball-milling method)
≥ 95
≥ 90
Fire Point
500 500
500 500
Filling density (g/cm2)
0.40-0.50
0.87-0.45
PH Value
5-7.5
5-9
Loss on drying
≤10 ≤ 10
≤10 ≤ 10




Very glad to welcome to our factory to visit and inspect.Please give us more advice so that we can do better .Thank you :)

high ion degree Cationic Pam For Sludge Dewatering

Cationic Pam
1.sludge dewatering
2.waste water treatment
3.as a kind flocculant used in waterworks
4.ISO9001-2000
Cationic Pam for sludge dewatering
Cationic pam is called flocculant poppularly, It appears white and lightyellow at solid, and colorless
vicous colloid at liquid.With this special structure, it can easily adsorb the suspended solids to purify
the water thoroughly. So it is widely used in metallurgy, papermaking, petroleum, chemical industry,
textiles and ore dressing for water treatment.

Cationic polymer flocculant is a water soluble linear polymer, and its molecular weight is between 400-1200million. It also casn be dissolved in methanol and ethanol, but can not be dissolved in ketones, esters, hydrocarbons and other organic solvents. Cationic CPF showed electropositive in acidic or alkaline medium, thus it is effective in the treatment of coagulation and sedimentation with the suspended particles in the negatively charged sewage water. Such as the production of monosodium glutamate factory,sugar-production wastewater, high content of organic wastewater, beverages-production wastewater,and printing and dyeing wastewater. In addition, cationic cpf also can be used as chemicals i oilfield,such as clay anti-swelling chemicals and thickning chemicals used in oilfield acidification, as well as enhancer chemicals used in papermaking.

1. As a flocculating agent
, mainly used in industrial solid-liquid separation process, including settlement, to clarify,concentrate and sludge dewatering processes,applications for all the major sectors are: urban sewage treatment,paper,food processing,petrochemical,metallurgical, processing, dyeing and the sugar and all kinds of industrial wastewater treatment.
Main advantages: effective, low dosage.


2. In the paper industry can be used as dry strength agents, retention agents,filter aids
,can be greatly improved as paper quality,enhance the physical strength of paper and reduce the loss of fiber or filler to accelerate the treatment, since enhanced retention to help filter effect can also be used in the
treatment of white water at the same time, in the deinking process can play a significant flocculation.
Main advantages: cost savings, improve the productive capacity of paper mills.


3. Fiber cement (asbestos - cement products)
will enable the forming of asbestos - cement products improved drainage; insulation board in, and fiber additives can increase the binding capacity.
Main advantages: cost savings, improve the asbestos slate billets, insulation board in the strength and fiber additives, binding capacity.

4.In the mining, coal mining industry
can be used for
waste water, coal washing waste water clarifier.
Main advantages: cost savings, high efficiency products.

5
.
Can be used for dyeing wastewater, leather wastewater, oily wastewater treatment
, so that turbidity removal,decolorization, to achieve the emission standards.

MODEL
MOLECULAR WEIGHT(MILLION)
DEGREE OF ION (%)
SOLUTION RATE (MIN)
SOLID CONTENT(%)
APPEARANCE
NUOERFLOC C-810
UL 4.2-5.2
20
5.-15
≥35
WHITE EMUOLSION
NUOERFLOC C-820
UL 4.2-5.2
40
5.-15
≥35
WHITE EMUOLSION
NUOERFLOC C-826
UL 4.2-5.2
60
5.-15
≥35
WHITE EMUOLSION
NUOERFLOC C-830
UL 4.2-5.2
80
5.-15
≥35
WHITE EMUOLSION


If our products are of interest to you, please let us know without fail;we will be happy to give our best quotatin upon receipt of your detailed requirements.

our tel:86-66738152

high molecular PAM in good quality(IVY)

PAM
1.Cationic Polyacrylamide
2.Polymer
3.Wastewater Treatment Chemical
PAM:


Polyacrylamide is a water soluble high-molecular polymer with a wide scope of usage.
uniform granule,good solubility
Specification
Cationic Polyacrylamide
ITEM
MOLECULAR WEIGHT
CATIONIC DEGREE
C8015
MEDIUM HIGH
LOW
C8020
MEDIUM HIGH
MEDIUM LOW
C8030
MEDIUM HIGH
MEDIUM HIGH
C8040
MEDIUM HIGH
HIGH
C8050
MEDIUM HIGH
ULTRA HIGH
C1205
LOW
HIGH
C1260
HIGH
ULTRA HIGH
C6040
MEDIUM
MEDIUM HIGH
C6050
HIGH
MEDIUM

high molecular PAM in good service (IVY)

PAM
1.Cationic Polyacrylamide
2.Polymer
3.Wastewater Treatment Chemical
PAM:


Polyacrylamide is a water soluble high-molecular polymer with a wide scope of usage.
uniform granule,good solubility
Specification
Cationic Polyacrylamide
ITEM
MOLECULAR WEIGHT
CATIONIC DEGREE
C8015
MEDIUM HIGH
LOW
C8020
MEDIUM HIGH
MEDIUM LOW
C8030
MEDIUM HIGH
MEDIUM HIGH
C8040
MEDIUM HIGH
HIGH
C8050
MEDIUM HIGH
ULTRA HIGH
C1205
LOW
HIGH
C1260
HIGH
ULTRA HIGH
C6040
MEDIUM
MEDIUM HIGH
C6050
HIGH
MEDIUM

high molecular PAM of wide usage (IVY)

PAM:
1.Cationic Polyacrylamide
2.Polymer
3.Wastewater Treatment Chemical
PAM:


Polyacrylamide is a water soluble high-molecular polymer with a wide scope of usage.
uniform granule,good solubility
Specification
Cationic Polyacrylamide
ITEM
MOLECULAR WEIGHT
CATIONIC DEGREE
C8015
MEDIUM HIGH
LOW
C8020
MEDIUM HIGH
MEDIUM LOW
C8030
MEDIUM HIGH
MEDIUM HIGH
C8040
MEDIUM HIGH
HIGH
C8050
MEDIUM HIGH
ULTRA HIGH
C1205
LOW
HIGH
C1260
HIGH
ULTRA HIGH
C6040
MEDIUM
MEDIUM HIGH
C6050
HIGH
MEDIUM

high molecular weight polyacrylamide(pam)/APAM

1,white powder or gel.
2,flocculating agent.
3,for treatment of wastewater and drinking water
4 HS: 9003-05-8



Anionic Polyacrylamid
The product is amde with the tecnoogy of pre-acrylamide alkaline hydrolysis and the procedure of granulation drying ,puverizing .The appearance feature of the product is white small particles or powder.
Specification:
Molecular weight (million)
18-25
15-17
10-14
8-10
6-8
4-5
Solid content (%)
≥90
≥90
≥90
≥90
≥90
≥90
Hydrolysis degree (%)
20-30
15-30
15-30
10-30
8-15
8-10
Residual monomer (%)
0.05-0.1
0.05-0.1
0.05-0.1
0.05-0.1
0.05-0.1
0.05-0.1
Effective pH value
7-14
7-14
7-14
7-14
7-14
7-14
Appearance
White powder/granule
Package: 25Kg Packed with woven bag innner-lined with PE bag or on the request of customers
Application:
Paper , leather and leather industry making industry, Drinking water purification,
Oil field , coal exploration
1. Paper , textile and leather making industry for the clarification of liquid caustic soda.
2. Drinking water purification, treatment of municipal sewage sludge, municipal solid waste and industrial effluent.
3.Oil field , coal exploration, geology, water conservancy,
4,Textile, carpet industry, sizing, quick-setting cement, synthetic resin coating.
sugar industry
5, Aquaculture feed additives and adhesives.
About us :

Our company is wellknown as a reliable manufacture, mainly producing water treatment materials. Such as Polyaluminium Chloride (PAC),PAM including (Anionic Polyacrylamide)APAM and CPAM (Cationic Polyacrylamide), and activated carbon series , i.e. Coconut shell activated carbon, nut shell activated carbon, coal columnar activated and powder activated carbon , with 2-shape: powder and columnar ,and materials: wood-based and coal-based.

high molecular weight polyacrylamide(pam)

1.polyacrylamide
2.with high molecular weight
3.good flocculant



Anionic Polyacrylamid
Description:
Polyacrylamide,abbreviation PAM,is a glassy solid,easy to adsorb water ; the absorbing speed are varied with different derivative ions.It is soluble in water and organic solvents as acetic acid,glycol,glycerin and amine.It will be decomposed after long time heating. Decomposed temperature is over 200oC.It can be carbonated into black powder at 210οC without oxygen.
It could be made to four series,e.g.,non-ion,cation,anion and mixed cation & anion.
Specification:
Features:
1) Appearance: white granule
2) Molecular weight: 5 - 22 million minimum
3) Granule: 20 - 100 mesh
4) Solid content: 88% minimum
5) Hydrolyzing degree: 10 - 20%, 20 - 30% or 30 - 40%
6) Dissolving time: 2 hours maximum (10°C)
7) Insoluble: 0.5% maximum
8) Monomer free: 0.05% maximum

Application:
1, Coal washing, mineral dressing such as silver, gold, copper and etc.
2, Used in textile, carpet industry, sizing, quick-setting cement, synthetic resin coating. Photosensitive polymers, adhesives, dispersing agent, as well as agricultural soil gel, slurry stabilizers, soil amendments;
3, Paper-making industry for the clarification of liquid caustic soda, fiber dispersing agent, can improve the beating, the filler retention agents, paper strengthening agent, can be used to improve the treatment rate and the white water recovery;
4, Used for drinking water purification, water purification, municipal sewage sludge, municipal solid waste and industrial effluent;
5, The sugar syrup for the industry to clarify the agent;
6, Can be used as aquaculture feed additives and adhesives;
7, Oil field water treatment to deal with the recovery of oil.

About us :
Our company is well known as a reliable manufacture, mainly producing water treatment materials, such as Polyaluminium Chloride (PAC),PAM including APAM (Anionic Polyacrylamide) and CPAM (Cationic Polyacrylamide),
and activated carbon series ,i.e. Coconut shell activated carbon, nut shell activated carbon, coal columnar activated and powder activated carbon .

high purity Anionic Polyacrylamide for the oil drill

1.polyacrylamide
2.with high molecular weight
3.good flocculant
4.sample is available



Anionic Polyacrylamid
Description:
The physical properties of polyacrylamide mainly depends on the behaviour in aqueous solution. Because of molecules chain gene containing amide groups or ions gene, the distinguishing feature is highly hydrophilic, and it can be dissolved in water in various proportions, and polyacrylamide aqueous solution on the electrolyte has a good tolerance, such as it is not sensitive with ammonium chloride, sodium sulfate, , and compatible.with surface active agen

Specification:
Anionic PAM
Cationic PAM
Molecular weight
5million-22million
Ion degree
20-80
Viscosity number
1600
Viscosity number
1200
Solid content
≥90%
Solid content%
90.5
Insoluble%
0.05-0.15
Insoluble%
≤0.1%
Apperence
white granule or powder
Apperence
White powder

Application:
It is mainly used:
1)Industrial wastewater treatment
2)Drinking water treatment
3)Starch ethanol plants and the loss of plant starch lees recovery
4)Oil displacement agent for the tertiary oil recovery
5)Water shutoff agent
6)Auxiliary of papermaking industry

About us :
Our company is well known as a reliable manufacture, mainly producing water treatment materials, such as Polyaluminium Chloride (PAC),PAM including APAM (Anionic Polyacrylamide) and CPAM (Cationic Polyacrylamide),
and activated carbon series ,i.e. Coconut shell activated carbon, nut shell activated carbon,
coal columnar activated and powder activated carbon .

Aluminum Sulfate-HQ

Usually, the crystal separated out from aqueous solution at the normal temperature.
Aluminum Sulfate
Molecular Formula:AL
2
(SO4)
3

Properties: including anhydrous and hydrous(18 crystal water) type. Usually, the crystal separated out from aqueous solution at the normal temperature is Al 2 (SO 4 ) 3 .18H 2 O; when weathering, the average molecular structure is Al 2 (SO 4 ) 3 .14H 2 O, may appear white powdery, with bright flake or crystalline flakelet, odorless, to change the taste from sweetness to slight astringency.
Uses: solidifying agent(to purify grease and water) and stabilizer in pasteurization of albumin(including: liquid or refrigerated whole egg, egg white or egg yolk), the maximum allowable use level(FAO/WHO.1984) is 0.036%.
Standard: HG2225-2001
State: flake or powder
Item
Standard
Result
Aluminum Oxide (AL
2
O
3
)%
15.6
15.8-17.0
Fe
2
O
3
1.0
0.015
PH
2.9
litmusless
Water-insoluble Matters
0.15
0.048
Packing: high-grade woven bag lined with plastic bag, net weight: 50kg or 25kg/bag; the shipping mark printing can be provided for the export packing according to the clients' requirements.

high purity Anionic Polyacrylamide for the oil drill

1.polyacrylamide
2.molecular weight:5-22million
3.Solid content:more than 90%




Anionic Polyacrylamid

Description:
It is the white powder. The APAM with the molecular weight of 5-22 million has good water solubility, and it can be dissolved in water by arbitrary proportion but not in organic solvents. It has the characteristics of high-polymer electrolyte in the neutral and alkaline medium, and it is sensitive to the electrolyte salt. And it can be cross-linked into insoluble gel with the high valence metal ions.

Specification:
1.Appearance: white granular powder
2.Molecular weight(million): ≥18
3.Water insoluble(wt%): ≤0.1
4.Ion degree(%):≤5
5.Dissolving speed ( H): ≤ 2
6.Residual monomer (%): ≤ 0.1
7.Solid content(%): ≥ 88

Application:
(1) Industrial waste water treatment:
For the neutral or alkaline waste water with pH value of 7-14, large suspended particles and ions of positive charge, it has the best treating effect, such as the waste water from iron industry, electroplating factory, metallurgical industry, coal washing, etc..
(2) Drinking water treatment:
When the drinking water still does not meet the standard after the treatment of the precipitation and filtering, then the APAM can be used as the flocculant. Its dosage is 2%-5% of that of the inorganic flocculants, but the effect of former is dozens of times of that of latter.
(3) It can be used for the recycling of the loss of brewers' grains in the alcohol plant and starch in the starch factory.
(4) It can be used as the water block agent in the oil field, and also the oil-displacing agent during the tertiary recovery.
(5) It can be applied in the paper-making industry. It can be used as the dispersant, retention aid, etc. in the long fiber paper-making, and also the flocculant for the waste water from the paper-making.

About us :
Our company is well known as a reliable manufacture, mainly producing water treatment materials, such as Polyaluminium Chloride (PAC),PAM including APAM (Anionic Polyacrylamide) and CPAM (Cationic Polyacrylamide),
and activated carbon series ,i.e. Coconut shell activated carbon, nut shell activated carbon, coal columnar activated and powder activated carbon .
If you need any of our products ,please feel free to contact us.
Thanks for your attention!

high purity Anionic Polyacrylamide for the oil drill

1.polyacrylamide
2.with high molecular weight
3.good flocculant
4.sample is available



Anionic Polyacrylamid
Description:
Polyacrylamide product details: PAM for the water-soluble polymers, insoluble in most organic solvents, has good flocculation, can reduce the friction between the liquid resistance, sub-divided by a non-ionic properties of ions, anions and cations And four types of gender-based

Specification:
Anionic PAM
Cationic PAM
Molecular weight
5million-22million
Ion degree
20-80
Viscosity number
1600
Viscosity number
1200
Solid content
≥90%
Solid content%
90.5
Insoluble%
0.05-0.15
Insoluble%
≤0.1%
Apperence
white granule or powder
Apperence
White powder

Application:
1, oil field exploration and development, geology, water conservancy,
coal exploration.
2, used for drinking water purification, water purification, municipal sewage sludge, municipal solid waste and industrial effluent;
3, paper-making industry for the clarification of liquid caustic soda, fiber dispersing agent, can improve the beating, the filler retention agents, paper strengthening agent, can be used to improve the treatment rate and the white water recovery;
4, used in textile, carpet industry, sizing, quick-setting cement, synthetic resin coating. Photosensitive polymers, adhesives, dispersing agent, as well as agricultural soil gel, slurry stabilizers, soil amendments;
5, the sugar syrup for the industry to clarify the agent;
6, can be used as aquaculture feed additives and adhesives;
7, oil field water treatment to deal with the recovery of oil.

About us :
Our company is well known as a reliable manufacture, mainly producing water treatment materials, such as Polyaluminium Chloride (PAC),PAM including APAM (Anionic Polyacrylamide) and CPAM (Cationic Polyacrylamide),
and activated carbon series ,i.e. Coconut shell activated carbon, nut shell activated carbon, coal columnar activated and powder activated carbon .

high purity Anionic Polyacrylamide for the oil drill

1,white powder or gel.
2,flocculating agent.
3,for treatment of wastewater and drinking water
4 HS: 9003-05-8



Anionic Polyacrylamid
The product is amde with the tecnoogy of pre-acrylamide alkaline hydrolysis and the procedure of granulation drying ,puverizing .The appearance feature of the product is white small particles or powder.
Specification:
Molecular weight (million)
18-25
15-17
10-14
8-10
6-8
4-5
Solid content (%)
≥90
≥90
≥90
≥90
≥90
≥90
Hydrolysis degree (%)
20-30
15-30
15-30
10-30
8-15
8-10
Residual monomer (%)
0.05-0.1
0.05-0.1
0.05-0.1
0.05-0.1
0.05-0.1
0.05-0.1
Effective pH value
7-14
7-14
7-14
7-14
7-14
7-14
Appearance
White powder/granule
Package: 25Kg Packed with woven bag innner-lined with PE bag or on the request of customers
Application:
Paper , leather and leather industry making industry, Drinking water purification,
Oil field , coal exploration
1. Paper , textile and leather making industry for the clarification of liquid caustic soda.
2. Drinking water purification, treatment of municipal sewage sludge, municipal solid waste and industrial effluent.
3.Oil field , coal exploration, geology, water conservancy,
4,Textile, carpet industry, sizing, quick-setting cement, synthetic resin coating.
sugar industry
5, Aquaculture feed additives and adhesives.
About us :

Our company is wellknown as a reliable manufacture, mainly producing water treatment materials. Such as Polyaluminium Chloride (PAC),PAM including (Anionic Polyacrylamide)APAM and CPAM (Cationic Polyacrylamide), and activated carbon series , i.e. Coconut shell activated carbon, nut shell activated carbon, coal columnar activated and powder activated carbon , with 2-shape: powder and columnar ,and materials: wood-based and coal-based.

high purity anion/polyacrylamide

1.polyacrylamide
2.with high molecular weight
3.good flocculant



Anionic Polyacrylamid

Description:
The product is amde with the tecnoogy of pre-acrylamide alkaline hydrolysis and the procedure of granulation drying ,puverizing .The appearance feature of the product is white small particles or powder.
Specification:
Features:
1) Appearance: white granule
2) Molecular weight: 5 - 22 million minimum
3) Granule: 20 - 100 mesh
4) Solid content: 88% minimum
5) Hydrolyzing degree: 10 - 20%, 20 - 30% or 30 - 40%
6) Dissolving time: 2 hours maximum (10°C)
7) Insoluble: 0.5% maximum
8) Monomer free: 0.05% maximum

Molecular weight (million)
18-25
15-17
10-14
8-10
6-8
4-5
Solid content (%)
≥90
≥90
≥90
≥90
≥90
≥90
Hydrolysis degree (%)
20-30
15-30
15-30
10-30
8-15
8-10
Residual monomer (%)
0.05-0.1
0.05-0.1
0.05-0.1
0.05-0.1
0.05-0.1
0.05-0.1
Package:
25Kg Packed with woven bag innner-lined with PE bag or on the request of customers

Application:
Paper , leather and leather industry making industry, Drinking water purification,
Oil field , coal exploration
1. Paper , textile and leather making industry for the clarification of liquid caustic soda.
2. Drinking water purification, treatment of municipal sewage sludge, municipal solid waste and industrial effluent.
3.Oil field , coal exploration, geology, water conservancy,
4,Textile, carpet industry, sizing, quick-setting cement, synthetic resin coating.
sugar industry
5, Aquaculture feed additives and adhesives.


About us :

Our company is wellknown as a reliable manufacture, mainly producing water treatment materials. Such as Polyaluminium Chloride (PAC),PAM including (Anionic Polyacrylamide)APAM and CPAM (Cationic Polyacrylamide), and activated carbon series , i.e. Coconut shell activated carbon, nut shell activated carbon, coal columnar activated and powder activated carbon , with 2-shape: powder and columnar ,and materials: wood-based and coal-based.

high purity anionic PAM/Polyacrylamide by Ouya

1. frist grade PAM
2.high molecular
3.used for petroleum drilling


Anionic Polyacrylamide

1.
Anionic PAM is copolymerized by acrylamide and acrylate monomer ,which is a super high molecular weight polymer, that is, 12 million minmum. Different model can be used according to the different application and the requirement of clients for the products performance.
Description:

Specification:
1) Appearance: white granule
2) Molecular weight: 5 - 22 million minimum
3) Granule: 20 - 100 mesh
4) Solid content: 88% minimum
5) Hydrolyzing degree: 10 - 20%, 20 - 30% or 30 - 40%
6) Dissolving time: 2 hours maximum (10°C)
7) Insoluble: 0.5% maximum
8) Monomer free: 0.05% maximum
Note:This is just for your reference,we can produce the products as per your demand.

3.Application:
It is mainly used:
1)Industrial wastewater treatment
2)Drinking water treatment
3)Starch ethanol plants and the loss of plant starch lees recovery
4)Oil displacement agent for the tertiary oil recovery
5)Water shutoff agent
6)Auxiliary of papermaking industry

About us :
Our company is well-known as a reliable manufacture, mainly producing water treatment materials, such as Polyaluminium Chloride (PAC),PAM including (Anionic Polyacrylamide)APAM and CPAM (Cationic Polyacrylamide), and activated carbon series ,i.e. Coconut shell activated carbon, nut shell activated carbon, coal columnar activated and powder activated carbon .
We can assure that we provide best products, reasonable price and perfect
service,we hope to establish
a long cooperation relationship with you .

high purity anionic PAM/Polyacrylamide

1.Product: polyacrylamide PAM
2.Usage: water treatment
3.Type: cationic PAM and anionic PAM
4 Manufaturer





Anionic Polyacrylamide
1.Description:
Polyacrylamide (PAM) is a unidimensional with polymer, easily dissolved in water, and its water solution is almost transparent thick fluid with noncorrosivity and innocuity, and not belong to dangerous goods. Solid PAM is featured of moisture abosorbility, flocculability, bindability, thickening ability and good stability.

Secifications :
Molecular Weight (million)
(adjustable)
Degree of Hydrolysis
(adjustable)
Solid Content%
Effective PH Range
Residual Monomer Content%
20-22
35-40

≥88%

7-14
≤0.05%
18-20
25-35
15-18
20-25
10-15
18-20
8-10
15-18
5-8
12-15
3-5
6-12

1)Appearance: White particles
2)Ion degrees: 35
3)Solid content%: 90 (2% fluctuation)
4)Cationic degree%: 35
5)0.3 aqueous solution viscosity MPA. S: 400-2030
6)Residual Monomers: ≤0.02
7)Dissolution time: ≤2h
8)Analysis of project/molecular weight(10, 000): ≥900




Note:This is just for your reference,we can produce the products as per your demand.

3.

Application:
1.Industrial waste water disposal
2.Drinking water treatment
3.Recovery of lost starch and alcohol in starch factory/alcohol factory
4.The industrial sewage processes
5.Paper industry
6.Helps keeps filter aid
7.Intensifier may enhance
8.Dispersing agent
9.Flocculant
10.Oil field domain
11.In three extraction applications
12.Mining and metallurgy domain


About us :
Our company is well-known as a reliable manufacture, mainly producing water treatment materials, such as Polyaluminium Chloride (PAC),PAM including (Anionic Polyacrylamide)APAM and CPAM (Cationic Polyacrylamide), and activated carbon series ,i.e. Coconut shell activated carbon, nut shell activated carbon, coal columnar activated and powder activated carbon .
We can assure that we provide best products, reasonable price and perfect service,we hope to establish
a long cooperation relationship with you .

high purity anionic PAM/Polyacrylamide

1) Appearance: white granule
2) Molecular weight: 5 - 22 million minimum
3) Granule: 20 - 100 mesh
4) Contact tracy
Polyacrylamide called PAM
, commonly known as flocculants or cohesion agent, sub-cation, anion type, the molecular weight between 400-1800 million, the product appearance is white or slightly yellow powder, soluble in water. In particular, acidic water, acid and organic matter and the red mud suspension turbidity from flocculation sedimentation and separation of the role of liquid mud, use less, water and low cost, flocculant can not be replaced by other products.

Features of
PAM:

1) Appearance: white granule
2) Molecular weight: 5 - 22 million minimum
3) Granule: 20 - 100 mesh
4) Solid content: 88% minimum
5) Hydrolyzing degree: 10 - 20%, 20 - 30% or 30 - 40%
6) Dissolving time: 2 hours maximum (10°C)
7) Insoluble: 0.5% maximum
8) Monomer free: 0.05% maximum

Any questions, contact tracy.