Factory price sales polyacrylamide

PAM for water and electricity,mining, coal preparation, paper making, textile, sugar, medicine, environmental protection
Summary
Products polyacrylamide (Polyacrylamide) called PAM, commonly known as flocculants or coagulant, is a linear polymer, molecular weight between 300-2500 million, and solid appearance of the product is white powder teeth, a colorless viscous liquid gel
like, soluble in water, almost insoluble in organic solvents.
The products w
idely used in water treatment and metallurgy, paper, petroleum, chemical, textile, sugar, medicine, washing, dressing and other fields.

Polyacrylamide mainly the following:
non-ionic polyacrylamide
cationic polyacrylamide
anionic polyacrylamide


Anionic polyacrylamide (APAM)
The main purpose
Industrial wastewater treatment: For suspended particles, representing a high concentration, particles with a positive charge, water PH value is neutral or alkaline water, iron and steel plant wastewater, electroplating plants and waste water, waste metallurgical, coal washing waste water treatment, the effect best. Drinking water treatment. Alcohol plant starch plant and the recovery of the loss of starch lees: Now a lot of starch, starch factory wastewater containing many are adding anionic polyacrylamide, flocculation and sedimentation of starch particles, and then precipitate by filter press filter press into a pie like, can be used for feed, ethanol plants also can be used anionic polyacrylamide alcohol dehydration, pressure filtration for recycling. Settlement for river mud. For the paper dry strength agent.
For paper chemicals, to help rate agent. In the paper pulp prior to the pump port-type storage pool with traces PAM-ASG-3 APAM can fill with water retention increased fines online 20-30%. Savings per ton of pulp 20-30kg.
For example: In the coal washing process produces a large number of wastewater discharged directly pollute the environment, must be recycled after the Qing Shen, recycling water, slime, also valuable, but not by natural settling, time and effort, while water is not clear.

Cationic polyacrylamide (CPAM)
The main purpose
1) for the sludge dewatering properties of sludge can be used according to the corresponding grades of the products can be effective before the sludge into the filter press sludge dewatering, dehydration, the resulting floc large, non-stick cloth, filter press without casual, stream cake thick, dehydration, high efficiency, the cake moisture content below 80%.
2) for domestic wastewater and organic waste water treatment or distribution of the products in the alkaline medium showed a cationic so that the suspended particles of sewage effluent with a negative charge to flocculation, clarification is very effective. Such as the production of grain alcohol, water, paper waste, urban sewage treatment plants, waste water, wastewater, wastewater from monosodium glutamate, sugar water, wastewater with high organic content, feed waste, textile printing and dyeing wastewater, using anionic polyacrylamide than , non-ionic polyacrylamide, or effect of inorganic salts several times or several times higher, because such waste generally with negative charge.
3) for the river water for tap water treatment flocculant, with less effective, low cost, in particular, and better use of inorganic coagulant compound, it will be the rule of the Yangtze, the Yellow River basin and other water plant efficient flocculant.
4) enhancer and other additives for paper making.
5) for the field by learning aids, such as clay anti-swelling agent, thickening agent used oil acidification.

Non-ionic polyacrylamide
The main purpose
1, mainly used as flocculants: Because of its molecular chain gene can contain a certain amount of adsorption of polar solid particles suspended in water, so that the particles form large flocs. It accelerates particles in suspension in the settlement, there are very obvious solution to speed up the clarification, for filtering and other effects, are widely used in chemical industry waste water, waste water treatment, municipal sewage treatment. Especially when the water is acidic, the use of this product is most appropriate. With inorganic flocculant iron, aluminum and other inorganic salts used in conjunction with polyethylene.
2, for the oil industry, oil, drilling mud, waste mud treatment, to prevent water channeling, reduced friction, enhanced oil recovery, enhanced oil recovery have been widely used.
3, for textile sizing agent, slurry, stable performance, down less pulp, fabric breakage rate is low, clean cloth.
4, for the paper industry, one is to increase filler and pigment retention rate. To reduce the wastage of raw materials and environmental pollution; second is to improve the strength of paper (including dry strength and wet strength), In addition, the use of PAM can also increase the tear resistance of paper and porous, to improve the visual and print performance, but also with packaging in the food and tea.
5, other industries.