PAM used for paper mill

PAM:
1.High-efficient flocculant effect
2.Widely used in all kinds of industrial wastewater and sewage treatment.

PAM
is a kind of organic polymer(white or light yellow powder), its density is 1.3 with thickening, flocculation, shearing, reduction, etc. PAM can be divided into three types: anionic type, cation type, nonionic type.
Anionic polyacrylamide (300-2000 million) m.w.

Scope of application:
Mainly used for sludge dewatering, solid-liquid separation and the coal dressing wastewater, and the recovery. Other applicable desulfurized wastewater flocculation and dehydration. Can be used in industrial wastewater, the urban sewage treatment.
Used in papermaking industry, can improve the wet strength, improve the paper fibers and small BaoLiuLv packing.
Used for oil drilling geological exploration, with mud materials.
Method of use:
This product is a concentration of aqueous 0.1% to use neutral excluding salt water advisable. This product will be dissolved, then stir evenly into the water, proper heating (< 60 ° c) can be accelerated to dissolve. Through the test, the product the best dosing quantity, adjust the water with optimal pH value. Storage and packing: packing solid product use polypropylene woven bags of 50kgs with inner plastic bags, 25 kg, Colloidal body use fiber barrels packaging, plastic, 200kg or 50kg per barrel. This product has hygroscopic, sealed in a cool and dry place, the temperature is lower than 35 degrees Celsius. Solid products and on the ground, avoid to prevent product after hygroscopic to become slippery.

Product technical specifications
Name
MolecularWeight(ten thousand)
Ion(%)
Solid Content(%)
remnant
list %
hydrolysis
Dissolve
Time
(min)
CPAM
------ ----
10-50
≥90
≤0.05
20-25
≤40
APAM
600-2000
--- --
≥90
≤0.05
20-30
≤60