manufacturing water treatment chemicals/corrosion prevention

cooling water chemicals
reverse osmosis chemcials
seawater desalination
boiler chemicals
MSDS can be supplied
Characteristic
Controls deposition and scale
Maximizes corrosion protection without heavy metals
minimizes acid feed
Stable in presence of halogens
Description and Use
HZ2330 controls the formation of corrosion and scale in open recirculating cooling water systems over the wide alkaline pH range (7-8.5). HZ2330 is versatile and have been successfully used in a broad range of systems operating under varying conditions.
Typical Applications
HZ2330 is designed for cooling water systems to operate at alkaline pH typically 8.0 or above. This means that acid feed and the costs and concerns associated with it may be reduced or eliminated. This inhibit the corrosion of mild steel and copper and its alloys. They effectively control common scales, such as calcium carbonate and calcium phosphate, calcium sulfate and fouling, due to iron and other suspended solids.
Treatment And Feeding Requirements
Dosage:The proper treatment level of HZ2330 depends on the individual formulation and needs of your system. The product should be fed in accordance with control parameters. For consistent protection, continuous feed if recommended.
Feedpoint: HZ2330 should be fed to a point in the cooling system where they can rapidly mix with the bulk cooling water.
Feed Equipment:
Tanks, pumps, piping and valves should be made of mild steel, stainless steel, polyethylene or most common plastics.
Dilution: For best results, HZ2330 should be fed neat. Dilutions, if necessary, are best made with low hardness water.
Packaging Information
25KG plastic drum or 230KG plastic drum or depend on the custom request.
Storage
Protect from freezing. If these products are frozen during shipment or storage, slight mixing may be required to ensure homogeneity.