Activated alumina:
1) Uniform particles
2)ISO9001:2000 is certificated
3)Free samples are available
Product introduction
The activated alumina
; Chinese name. [English] active Alumina Alumina controller name, Reactive alumina, Um alumin controller (I) oxide catalyst in the noun "used in explanation of alumina usually only called" the activated alumina ", it is a kind of porous, high dispersion of solid material, a large surface area, its pore surface has required the catalytic properties, such as adsorption, surface activity, high thermal stability, etc, so widely used for chemical reaction and catalyst carriers.
[
editor this segment] purposes
High-performance activated alumina in monolithic refractories ingredients can bring benefits below: improving the body density, liquidity and strength, improve the second mullite relic, reduce the quantity and porosity. In addition, still can make the activated alumina desiccant, water quantity, the drying speed is fast, can regenerate (400-500K roasted). The activated alumina belongs to the category of alumina, mainly used in chemical, catalyst and DTC absorbent, catalytic carrier, according to different purposes, the raw material and preparation.
Product technical data
Index name
Al
2
o
3
%
Sio
2
%
Fe
2
o3
%
Na20
%
Burning reduction
%
Apparent density
g/ml
Specific surface area
M
2
/g
Hole volume
Ml/g
Crush strength
N/particle
Technical
requirements
≥92
≤
0.10
≤
0.04
≤
0.45
≤8
≤0.75
≥260
≥0.40
≥20
1-2mm
≥92
≤
0.10
≤
0.04
≤
0.45
≤8
≤0.75
≥260
≥0.40
≥40
2-3mm
≥92
≤
0.10
≤
0.04
≤
0.45
≤8
≤0.75
≥260
≥0.40
≥80
3-5mm
≥92
≤
0.10
≤
0.04
≤
0.45
≤8
≤0.75
≥260
≥0.40
≥100
4-6mm
≥92
≤
0.10
≤
0.04
≤
0.45
≤8
≤0.75
≥260
≥0.40
≥140
5-8mm
Saturday, August 20, 2011
PAC-Poly Aluminium Chloride
Polyaluminum Chloride PAC
1.white or yellow solid powder
2. There is a strong adsorption
3. Purifying effect is obvious
Polyaluminum Chloride PAC
Usage :
1. The solid product dissolved in water at 1:3, after it becomes the liquid,
Together with 10-30 times the concentration of water used after dilution to the required
2. The amount of raw water according to the different turbidity...
the general turbidity of the water in the 100-500mg / L, each dosage tons 10-20kg.
packing :inner layer of plastic bag ,outer layer of plastic film woven bag
Major specifications:
Names
Products degree
Drinking water
(1st class)
Non-drinking water
(2nd class)
AL2O3
Min 29-32
Min 29-30
Basicity%
50-85
60-85
PH
3.5-5
3.5-5
Water-insoluble
substances
Max 0.5-1.5
Max 1.5-3
Pb
PPm Max 3.0
00As
PPm Max 0.5
Fe
PPm Max 0.3
Hg
PPm Max 0.2
The specific dosage quantity of the flocculants:
Turbidity before treatment
30-100
100-250
250-400
400-1000
1000-5000
7500
Dosage (1mg/L)
2.51
3.44
4.45
6.13
12.47
19.9
Turbidity after treatment
3
3
5
5
6
8
1.white or yellow solid powder
2. There is a strong adsorption
3. Purifying effect is obvious
Polyaluminum Chloride PAC
Usage :
1. The solid product dissolved in water at 1:3, after it becomes the liquid,
Together with 10-30 times the concentration of water used after dilution to the required
2. The amount of raw water according to the different turbidity...
the general turbidity of the water in the 100-500mg / L, each dosage tons 10-20kg.
packing :inner layer of plastic bag ,outer layer of plastic film woven bag
Major specifications:
Names
Products degree
Drinking water
(1st class)
Non-drinking water
(2nd class)
AL2O3
Min 29-32
Min 29-30
Basicity%
50-85
60-85
PH
3.5-5
3.5-5
Water-insoluble
substances
Max 0.5-1.5
Max 1.5-3
Pb
PPm Max 3.0
00As
PPm Max 0.5
Fe
PPm Max 0.3
Hg
PPm Max 0.2
The specific dosage quantity of the flocculants:
Turbidity before treatment
30-100
100-250
250-400
400-1000
1000-5000
7500
Dosage (1mg/L)
2.51
3.44
4.45
6.13
12.47
19.9
Turbidity after treatment
3
3
5
5
6
8
PAC/polyaluminium chloride 30% granular
1.PAC/polyaluminium chloride 30%granular
1.Name:PAC/polyaluminium chloride granular
2.Packing: 25kgs/PE bags,25kgs polypropylene woven bags with inner plastic bags
3.Product performance and usage:The product is high-efficient,cheap and nontoxic inorganic high molecular compoumd.The liquid is colorless or light yellow and transparent,the solid is light yellow powder.It is easily soluble in water.In the hydrolytic process,it is accompanied with the chemical
process such as electrochemistry,coagulation,absorption and precipitation.The product has the features including wide applicable range of PH value,large granule,and quick speed in sedimentation.It is widely applied for treating the domestic drinking water,domestic sewage
and industrial waste water.
4.Package and storage:The liquid is packed in polyethylene bucket and the solid is packed in
two-layer bag with the interior in plastic and the exterior in woven.The weight of each bag is 25 Kg.With certain causticity,the product shall be sealed and stored in the dry and ventilated place to prevent from rain ,high temperature and strong sunglight.The shelf life of liquid product is 6 months and that of solid product is 12 months
. Package and storage
The liquid is packed in polyethylene bucket and the solid is packed in two-layer bag with the interior in plastic and the exterior in woven. The weight of each bag is 25 Kg.
With certain causticity, the product shall be sealed and stored in the dry and ventilated place to prevent from rain, high temperature and strong sunlight. The shelf life of liquid product is 6 months and that of solid product is 12 months.
Major quality indexes specifications
Index Name
Liquid
Solid
Aluminium oxide(Al2O3) %
10.0
30
Basicity%
40-90
40-90
PH (1% aqueous solution)
3.5-5.0
3.5-5.0
Water insoluble % ≤
0.3
1.0
aluminium oxide %≥30
basicity% 40-90
PH( 1% aqueous solution) 3.5-5.0
water insoluble %≤ 1.0
Main characteristics
1.The flocculation body takes shape quickly,good activeness,good
filterability.
2.Don't need alkalify to help,in case the deliquescence,its effect is
invariable.
Adapts in the PH value is wide,compatible,versatility.
4.Has processed in the water the salty share are few.
5.Can except the heavy mental and the radioactive sunstance adding
water pollution.
if you have question pls contact with me.
1.Name:PAC/polyaluminium chloride granular
2.Packing: 25kgs/PE bags,25kgs polypropylene woven bags with inner plastic bags
3.Product performance and usage:The product is high-efficient,cheap and nontoxic inorganic high molecular compoumd.The liquid is colorless or light yellow and transparent,the solid is light yellow powder.It is easily soluble in water.In the hydrolytic process,it is accompanied with the chemical
process such as electrochemistry,coagulation,absorption and precipitation.The product has the features including wide applicable range of PH value,large granule,and quick speed in sedimentation.It is widely applied for treating the domestic drinking water,domestic sewage
and industrial waste water.
4.Package and storage:The liquid is packed in polyethylene bucket and the solid is packed in
two-layer bag with the interior in plastic and the exterior in woven.The weight of each bag is 25 Kg.With certain causticity,the product shall be sealed and stored in the dry and ventilated place to prevent from rain ,high temperature and strong sunglight.The shelf life of liquid product is 6 months and that of solid product is 12 months
. Package and storage
The liquid is packed in polyethylene bucket and the solid is packed in two-layer bag with the interior in plastic and the exterior in woven. The weight of each bag is 25 Kg.
With certain causticity, the product shall be sealed and stored in the dry and ventilated place to prevent from rain, high temperature and strong sunlight. The shelf life of liquid product is 6 months and that of solid product is 12 months.
Major quality indexes specifications
Index Name
Liquid
Solid
Aluminium oxide(Al2O3) %
10.0
30
Basicity%
40-90
40-90
PH (1% aqueous solution)
3.5-5.0
3.5-5.0
Water insoluble % ≤
0.3
1.0
aluminium oxide %≥30
basicity% 40-90
PH( 1% aqueous solution) 3.5-5.0
water insoluble %≤ 1.0
Main characteristics
1.The flocculation body takes shape quickly,good activeness,good
filterability.
2.Don't need alkalify to help,in case the deliquescence,its effect is
invariable.
Adapts in the PH value is wide,compatible,versatility.
4.Has processed in the water the salty share are few.
5.Can except the heavy mental and the radioactive sunstance adding
water pollution.
if you have question pls contact with me.
PAC/polyaluminium chloride 30% granular
Polyaluminum Chloride PAC
1.white or yellow solid powder
2. There is a strong adsorption
3. Purifying effect is obvious
Polyaluminum Chloride PAC
Usage :
1. The solid product dissolved in water at 1:3, after it becomes the liquid,
Together with 10-30 times the concentration of water used after dilution to the required
2. The amount of raw water according to the different turbidity...
the general turbidity of the water in the 100-500mg / L, each dosage tons 10-20kg.
packing :inner layer of plastic bag ,outer layer of plastic film woven bag
Major specifications:
Names
Products degree
Drinking water
(1st class)
Non-drinking water
(2nd class)
AL2O3
Min 29-32
Min 29-30
Basicity%
50-85
60-85
PH
3.5-5
3.5-5
Water-insoluble
substances
Max 0.5-1.5
Max 1.5-3
Pb
PPm Max 3.0
00As
PPm Max 0.5
Fe
PPm Max 0.3
Hg
PPm Max 0.2
The specific dosage quantity of the flocculants:
Turbidity before treatment
30-100
100-250
250-400
400-1000
1000-5000
7500
Dosage (1mg/L)
2.51
3.44
4.45
6.13
12.47
19.9
Turbidity after treatment
3
3
5
5
6
8
1.white or yellow solid powder
2. There is a strong adsorption
3. Purifying effect is obvious
Polyaluminum Chloride PAC
Usage :
1. The solid product dissolved in water at 1:3, after it becomes the liquid,
Together with 10-30 times the concentration of water used after dilution to the required
2. The amount of raw water according to the different turbidity...
the general turbidity of the water in the 100-500mg / L, each dosage tons 10-20kg.
packing :inner layer of plastic bag ,outer layer of plastic film woven bag
Major specifications:
Names
Products degree
Drinking water
(1st class)
Non-drinking water
(2nd class)
AL2O3
Min 29-32
Min 29-30
Basicity%
50-85
60-85
PH
3.5-5
3.5-5
Water-insoluble
substances
Max 0.5-1.5
Max 1.5-3
Pb
PPm Max 3.0
00As
PPm Max 0.5
Fe
PPm Max 0.3
Hg
PPm Max 0.2
The specific dosage quantity of the flocculants:
Turbidity before treatment
30-100
100-250
250-400
400-1000
1000-5000
7500
Dosage (1mg/L)
2.51
3.44
4.45
6.13
12.47
19.9
Turbidity after treatment
3
3
5
5
6
8
PAC/polyaluminium chloride 30% powder
1.PAC/polyaluminium chloride 30% powder is high efficient.
2.PAC/polyaluminium chloride 30% powder is yellow solid.
1.Name:PAC/polyaluminium chloride powder
2.Packing: 25kgs/PE bags,25kgs polypropylene woven bags with inner plastic bags
3.Product performance and usage:The product is high-efficient,cheap and nontoxic inorganic high molecular compoumd.The liquid is colorless or light yellow and transparent,the solid is light yellow powder.It is easily soluble in water.In the hydrolytic process,it is accompanied with the chemical
process such as electrochemistry,coagulation,absorption and precipitation.The product has the features including wide applicable range of PH value,large granule,and quick speed in sedimentation.It is widely applied for treating the domestic drinking water,domestic sewage
and industrial waste water.
4.Package and storage:The liquid is packed in polyethylene bucket and the solid is packed in
two-layer bag with the interior in plastic and the exterior in woven.The weight of each bag is 25 Kg.With certain causticity,the product shall be sealed and stored in the dry and ventilated place to prevent from rain ,high temperature and strong sunglight.The shelf life of liquid product is 6 months and that of solid product is 12 months
Appearence
Solid power in yellow colour
Aluminium oxide(Al2O3 ) %
≥30
Basicity, %
40 -85
Water insoluble, %
≤0.3
PH ( 1% aqueous oxide)%
3.5-5.0
Fe, %
≤ 0.005
Sulpate, %
≤ 9.8
Pb, %
≤ 0.003
As, %
≤ 0.0005
Mn, %
≤ 0.045
Hg, %
≤ 0.0015
Cr6+, %
≤ 0.00002
Cd, %
≤ 0.0006
Main characteristics
1.The flocculation body takes shape quickly,good activeness,good
filterability.
2.Don't need alkalify to help,in case the deliquescence,its effect is
invariable.
Adapts in the PH value is wide,compatible,versatility.
4.Has processed in the water the salty share are few.
5.Can except the heavy mental and the radioactive sunstance adding
water pollution.
if you have question pls contact with me.
2.PAC/polyaluminium chloride 30% powder is yellow solid.
1.Name:PAC/polyaluminium chloride powder
2.Packing: 25kgs/PE bags,25kgs polypropylene woven bags with inner plastic bags
3.Product performance and usage:The product is high-efficient,cheap and nontoxic inorganic high molecular compoumd.The liquid is colorless or light yellow and transparent,the solid is light yellow powder.It is easily soluble in water.In the hydrolytic process,it is accompanied with the chemical
process such as electrochemistry,coagulation,absorption and precipitation.The product has the features including wide applicable range of PH value,large granule,and quick speed in sedimentation.It is widely applied for treating the domestic drinking water,domestic sewage
and industrial waste water.
4.Package and storage:The liquid is packed in polyethylene bucket and the solid is packed in
two-layer bag with the interior in plastic and the exterior in woven.The weight of each bag is 25 Kg.With certain causticity,the product shall be sealed and stored in the dry and ventilated place to prevent from rain ,high temperature and strong sunglight.The shelf life of liquid product is 6 months and that of solid product is 12 months
Appearence
Solid power in yellow colour
Aluminium oxide(Al2O3 ) %
≥30
Basicity, %
40 -85
Water insoluble, %
≤0.3
PH ( 1% aqueous oxide)%
3.5-5.0
Fe, %
≤ 0.005
Sulpate, %
≤ 9.8
Pb, %
≤ 0.003
As, %
≤ 0.0005
Mn, %
≤ 0.045
Hg, %
≤ 0.0015
Cr6+, %
≤ 0.00002
Cd, %
≤ 0.0006
Main characteristics
1.The flocculation body takes shape quickly,good activeness,good
filterability.
2.Don't need alkalify to help,in case the deliquescence,its effect is
invariable.
Adapts in the PH value is wide,compatible,versatility.
4.Has processed in the water the salty share are few.
5.Can except the heavy mental and the radioactive sunstance adding
water pollution.
if you have question pls contact with me.
PAC/polyaluminium chloride
1.PAC/polyaluminium chloride 30% is high efficient.
2.PAC/ /polyaluminium chloride is yellow solid.
1.Name:PAC/polyaluminium chloride
2.Packing: 25kgs/PE bags,25kgs polypropylene woven bags with inner plastic bags
3.Product performance and usage:The product is high-efficient,cheap and nontoxic inorganic high molecular compoumd.The liquid is colorless or light yellow and transparent,the solid is light yellow powder.It is easily soluble in water.In the hydrolytic process,it is accompanied with the chemical
process such as electrochemistry,coagulation,absorption and precipitation.The product has the features including wide applicable range of PH value,large granule,and quick speed in sedimentation.It is widely applied for treating the domestic drinking water,domestic sewage
and industrial waste water.
4.Package and storage:The liquid is packed in polyethylene bucket and the solid is packed in
two-layer bag with the interior in plastic and the exterior in woven.The weight of each bag is 25 Kg.With certain causticity,the product shall be sealed and stored in the dry and ventilated place to prevent from rain ,high temperature and strong sunglight.The shelf life of liquid product is 6 months and that of solid product is 12 months
Appearence
Solid power in yellow colour
Aluminium oxide(Al2O3 ) %
≥30
Basicity, %
40 -85
Water insoluble, %
≤0.3
PH ( 1% aqueous oxide)%
3.5-5.0
Fe, %
≤ 0.005
Sulpate, %
≤ 9.8
Pb, %
≤ 0.003
As, %
≤ 0.0005
Mn, %
≤ 0.045
Hg, %
≤ 0.0015
Cr6+, %
≤ 0.00002
Cd, %
≤ 0.0006
Main characteristics
1.The flocculation body takes shape quickly,good activeness,good
filterability.
2.Don't need alkalify to help,in case the deliquescence,its effect is
invariable.
Adapts in the PH value is wide,compatible,versatility.
4.Has processed in the water the salty share are few.
5.Can except the heavy mental and the radioactive sunstance adding
water pollution.
if you have question pls contact with me.
2.PAC/ /polyaluminium chloride is yellow solid.
1.Name:PAC/polyaluminium chloride
2.Packing: 25kgs/PE bags,25kgs polypropylene woven bags with inner plastic bags
3.Product performance and usage:The product is high-efficient,cheap and nontoxic inorganic high molecular compoumd.The liquid is colorless or light yellow and transparent,the solid is light yellow powder.It is easily soluble in water.In the hydrolytic process,it is accompanied with the chemical
process such as electrochemistry,coagulation,absorption and precipitation.The product has the features including wide applicable range of PH value,large granule,and quick speed in sedimentation.It is widely applied for treating the domestic drinking water,domestic sewage
and industrial waste water.
4.Package and storage:The liquid is packed in polyethylene bucket and the solid is packed in
two-layer bag with the interior in plastic and the exterior in woven.The weight of each bag is 25 Kg.With certain causticity,the product shall be sealed and stored in the dry and ventilated place to prevent from rain ,high temperature and strong sunglight.The shelf life of liquid product is 6 months and that of solid product is 12 months
Appearence
Solid power in yellow colour
Aluminium oxide(Al2O3 ) %
≥30
Basicity, %
40 -85
Water insoluble, %
≤0.3
PH ( 1% aqueous oxide)%
3.5-5.0
Fe, %
≤ 0.005
Sulpate, %
≤ 9.8
Pb, %
≤ 0.003
As, %
≤ 0.0005
Mn, %
≤ 0.045
Hg, %
≤ 0.0015
Cr6+, %
≤ 0.00002
Cd, %
≤ 0.0006
Main characteristics
1.The flocculation body takes shape quickly,good activeness,good
filterability.
2.Don't need alkalify to help,in case the deliquescence,its effect is
invariable.
Adapts in the PH value is wide,compatible,versatility.
4.Has processed in the water the salty share are few.
5.Can except the heavy mental and the radioactive sunstance adding
water pollution.
if you have question pls contact with me.
PAC30% with Ex-factory price
Name: poly aluminium chloride PAC
Appearance: slight yellow powder
High-efficient flocculant
PAC is yellow or light yellow solid powder, and soluble in water, there is a strong bridge adsorption. With the electrochemical process in the hydrolysis, condensation, adsorption and precipitation and other physical and chemical changes in the final generation [Al2 (OH) 3 (OH) 3] α ↓, to achieve the purpose of purification.
Features:
1, without adding other additives, fast and thick floc formation, activity, rapid sedimentation, high turbidity of the water purification effect is particularly evident.
2, meet the wide range of PH value, reduce the PH value of raw water is small, therefore no corrosion on the pipeline equipment.
3, Wastewater, remove COD, BOD and SS, detergency strong. Water effect is Al2 (SO4) 3 4-6 times, AlCl3 3-5 times. The amount is small, the effectiveness of large; low cost, effective.
PAC is mainly used for drinking water purification and industrial waste water, special water treatment (such as oily waste water, printing and dyeing wastewater, refining wastewater containing radioactive substances, including Pb, Cr and other toxic heavy metals and fluorine-containing waste water, etc.) In addition, oil drilling, leather, metallurgy, paper making also has a wide range of uses.
Name
solid
Excellent article
First-class article
AL
2
o
3
%≥
30.0
28.0
Base saturability %
40-90
40-90
Water content
0.3
1.0
PH(1% water solution)
3.5-5.0
3.5-5.0
N %≤
0.01
As% ≤
0.0002
Pb%≤
0.001
Cd%≤
0.0002
Hg%≤
0.00001
Cr
6+
%≤
0.0005
Appearance: slight yellow powder
High-efficient flocculant
PAC is yellow or light yellow solid powder, and soluble in water, there is a strong bridge adsorption. With the electrochemical process in the hydrolysis, condensation, adsorption and precipitation and other physical and chemical changes in the final generation [Al2 (OH) 3 (OH) 3] α ↓, to achieve the purpose of purification.
Features:
1, without adding other additives, fast and thick floc formation, activity, rapid sedimentation, high turbidity of the water purification effect is particularly evident.
2, meet the wide range of PH value, reduce the PH value of raw water is small, therefore no corrosion on the pipeline equipment.
3, Wastewater, remove COD, BOD and SS, detergency strong. Water effect is Al2 (SO4) 3 4-6 times, AlCl3 3-5 times. The amount is small, the effectiveness of large; low cost, effective.
PAC is mainly used for drinking water purification and industrial waste water, special water treatment (such as oily waste water, printing and dyeing wastewater, refining wastewater containing radioactive substances, including Pb, Cr and other toxic heavy metals and fluorine-containing waste water, etc.) In addition, oil drilling, leather, metallurgy, paper making also has a wide range of uses.
Name
solid
Excellent article
First-class article
AL
2
o
3
%≥
30.0
28.0
Base saturability %
40-90
40-90
Water content
0.3
1.0
PH(1% water solution)
3.5-5.0
3.5-5.0
N %≤
0.01
As% ≤
0.0002
Pb%≤
0.001
Cd%≤
0.0002
Hg%≤
0.00001
Cr
6+
%≤
0.0005
ACTIVATED CARBON FOR ELECTRIC POWER
These series of activated carbon in granular form are made from fruitshell or coal
1. Technology:
These series of activated carbon in granular form are made from fruitshell or coal, activated via high temperature water steam method, under the process of crushing, aftertreatment.
2. Characteristics:
These series of activated carbon with large surface area, developed pore structure, high adsorption, high strength, well washable, easy regeneration function.
3. Using fields:
Widely used in thermal power plants, petrochemical refineries in the water purification, desulfurization, deodorization, adsorption of gas changes and petroleum catalytic reforming .Also used in fine desulfurization of various sulfur gases; syngas, petroleum gas, coal gas, casing-head gas and so on. Especially used in ethylene gas, food grade carbon dioxide desulfurization .These series of
activated carbon have special effect for organic sulfur removal, it could be removed to below 1 ppm. the activated carbon can be regenerated ,easy to operate .One-time cost and operating cost are
very low .Such activated carbon has long working life and good using effection. It can also be used in the fine desulfurization which in the sulfur content of 250ppm in the gas. using airspeed at
300-500 hr/1 . Regeneration period, it is determined by the sulfur content from the entrance of the size .It may be from several weeks to several months.
1. Technology:
These series of activated carbon in granular form are made from fruitshell or coal, activated via high temperature water steam method, under the process of crushing, aftertreatment.
2. Characteristics:
These series of activated carbon with large surface area, developed pore structure, high adsorption, high strength, well washable, easy regeneration function.
3. Using fields:
Widely used in thermal power plants, petrochemical refineries in the water purification, desulfurization, deodorization, adsorption of gas changes and petroleum catalytic reforming .Also used in fine desulfurization of various sulfur gases; syngas, petroleum gas, coal gas, casing-head gas and so on. Especially used in ethylene gas, food grade carbon dioxide desulfurization .These series of
activated carbon have special effect for organic sulfur removal, it could be removed to below 1 ppm. the activated carbon can be regenerated ,easy to operate .One-time cost and operating cost are
very low .Such activated carbon has long working life and good using effection. It can also be used in the fine desulfurization which in the sulfur content of 250ppm in the gas. using airspeed at
300-500 hr/1 . Regeneration period, it is determined by the sulfur content from the entrance of the size .It may be from several weeks to several months.
PAFC for waste water treatment
PAFC is mainly produce by the Aluminum and Ferrum.It is a new complex macromolecule PAFC for water solution.
The high efficiency is a mainly characteristic of this product. Especially used at drinking water and industrial water solution of the low temperature condition.
PAFC developed and manufactured by our company is totally conformed with Health Supervision and Administration Procedure for Drinking Water through the test of He Nan Provincial Health control center. Issued by Manufacturing Licence of Domestic Products Related to Health and Safety of Drinking Water ,and its standard was up to par Nation water solution standard 2007. This products developed on the basis of in depth research of hydrolyze and coagulating mechanism of poly aluminum and iron salt, collect advantages of aluminum salt and iron salt ,can greatly improve the shapes of aluminium and iron ion and increase polymerization degree through introducing polyvalence anion, sulfate ion.
Item
Liquid
Solid
Relative density(20)
1.1
-
PH value(1% aqueous solution)
3.5-5.0
3.5-5.0
AL
2
O
3
%
10.0
30.0
Fe
2
O
3
%
1-2
2-3
Basicity,%
60-95
60-95
Water inoluble substance % max
0.3
1.0
As % max
0.0003
0.0006
Mn % max
0.045
0.10
Hg % max
0.00002
0.00006
Pb % ≤
0.001
0.003
SO2- %
3.5-9.6
3.5-10
The high efficiency is a mainly characteristic of this product. Especially used at drinking water and industrial water solution of the low temperature condition.
PAFC developed and manufactured by our company is totally conformed with Health Supervision and Administration Procedure for Drinking Water through the test of He Nan Provincial Health control center. Issued by Manufacturing Licence of Domestic Products Related to Health and Safety of Drinking Water ,and its standard was up to par Nation water solution standard 2007. This products developed on the basis of in depth research of hydrolyze and coagulating mechanism of poly aluminum and iron salt, collect advantages of aluminum salt and iron salt ,can greatly improve the shapes of aluminium and iron ion and increase polymerization degree through introducing polyvalence anion, sulfate ion.
Item
Liquid
Solid
Relative density(20)
1.1
-
PH value(1% aqueous solution)
3.5-5.0
3.5-5.0
AL
2
O
3
%
10.0
30.0
Fe
2
O
3
%
1-2
2-3
Basicity,%
60-95
60-95
Water inoluble substance % max
0.3
1.0
As % max
0.0003
0.0006
Mn % max
0.045
0.10
Hg % max
0.00002
0.00006
Pb % ≤
0.001
0.003
SO2- %
3.5-9.6
3.5-10
PAFC
PAFC is mainly produce by the Aluminum and Ferrum. It is a new complex macromolecule PAFC for water solution.
The high efficiency is a mainly characteristic of this product. Especially used at drinking water and industrial water solution of the low temperature condition.
PAFC developed and manufactured by our company is totally conformed with Health Supervision and Administration Procedure for Drinking Water through the test of He Nan Provincial Health control center. Issued by Manufacturing Licence of Domestic Products Related to Health and Safety of Drinking Water ,and its standard was up to par Nation water solution standard 2007. This products developed on the basis of in depth research of hydrolyze and coagulating mechanism of poly aluminum and iron salt, collect advantages of aluminum salt and iron salt ,can greatly improve the shapes of aluminium and iron ion and increase polymerization degree through introducing polyvalence anion, sulfate ion.
Item
Liquid
Solid
Relative density(20)
1.1
-
PH value(1% aqueous solution)
3.5-5.0
3.5-5.0
AL
2
O
3
%
10.0
30.0
Fe
2
O
3
%
1-2
2-3
Basicity,%
60-95
60-95
Water insoluble substance % max
0.3
1.0
As % max
0.0003
0.0006
Mn % max
0.045
0.10
Hg % max
0.00002
0.00006
Pb % ≤
0.001
0.003
SO2- %
3.5-9.6
3.5-10
The high efficiency is a mainly characteristic of this product. Especially used at drinking water and industrial water solution of the low temperature condition.
PAFC developed and manufactured by our company is totally conformed with Health Supervision and Administration Procedure for Drinking Water through the test of He Nan Provincial Health control center. Issued by Manufacturing Licence of Domestic Products Related to Health and Safety of Drinking Water ,and its standard was up to par Nation water solution standard 2007. This products developed on the basis of in depth research of hydrolyze and coagulating mechanism of poly aluminum and iron salt, collect advantages of aluminum salt and iron salt ,can greatly improve the shapes of aluminium and iron ion and increase polymerization degree through introducing polyvalence anion, sulfate ion.
Item
Liquid
Solid
Relative density(20)
1.1
-
PH value(1% aqueous solution)
3.5-5.0
3.5-5.0
AL
2
O
3
%
10.0
30.0
Fe
2
O
3
%
1-2
2-3
Basicity,%
60-95
60-95
Water insoluble substance % max
0.3
1.0
As % max
0.0003
0.0006
Mn % max
0.045
0.10
Hg % max
0.00002
0.00006
Pb % ≤
0.001
0.003
SO2- %
3.5-9.6
3.5-10
PAM Polyacrylamide
Polyacrylamide can be used as fining agent, residency agent, filtration aid and paper dry and wet intensity reinforcing agent
Polyacrylamide
Application Field
Use
Category
Aluminum Metallurgy, Production of and
Circulating Water, Removing Foreign Matters in Production Process, Red Mud Sedimentation and Separation
Improving Filtration Speed
;
Waste Water
Waste Water Processing
;
Leather making
Waste Water Processing
;
Clay and Ceramics
Concentration
Clay Production
Water Repeated Use
Coal Slurry , Concentrated Filtration
;
Oil Paint
Waste Water
;
Technique
Milk Product Technique
and Sludge Treatment
Electroplating
Treatment
;
and Fine Particle Filtration
;
Iron and Steel Industry
Gas Washing and Pickling Liquor Purification of in Steel Factory
;
Uranium Mine , Copper Mine and Other Mineral Treatment
Automobile Industry
Sewage Water Processing
Pharmacy
Waste Water Processing
Production of through Wet Method
Acid Liquid , Improving Filtration Speed, and Reducing Loss of in
Industry
;
Rubber Processing
Waste Water Processing
Waste Water Processing
;
Sugar Production
and Purification, Water Repeat Use of Water in Sugar Production
Paper-making
, Sludge Dewatering, Waste Water Processing
;
Oil Production
Well Drilling ; Tertiary Oil Recovery
Copper Mine Production
Fine Particle through , and Acid
Polyacrylamide
Application Field
Use
Category
Aluminum Metallurgy, Production of and
Circulating Water, Removing Foreign Matters in Production Process, Red Mud Sedimentation and Separation
Improving Filtration Speed
;
Waste Water
Waste Water Processing
;
Leather making
Waste Water Processing
;
Clay and Ceramics
Concentration
Clay Production
Water Repeated Use
Coal Slurry , Concentrated Filtration
;
Oil Paint
Waste Water
;
Technique
Milk Product Technique
and Sludge Treatment
Electroplating
Treatment
;
and Fine Particle Filtration
;
Iron and Steel Industry
Gas Washing and Pickling Liquor Purification of in Steel Factory
;
Uranium Mine , Copper Mine and Other Mineral Treatment
Automobile Industry
Sewage Water Processing
Pharmacy
Waste Water Processing
Production of through Wet Method
Acid Liquid , Improving Filtration Speed, and Reducing Loss of in
Industry
;
Rubber Processing
Waste Water Processing
Waste Water Processing
;
Sugar Production
and Purification, Water Repeat Use of Water in Sugar Production
Paper-making
, Sludge Dewatering, Waste Water Processing
;
Oil Production
Well Drilling ; Tertiary Oil Recovery
Copper Mine Production
Fine Particle through , and Acid
ACTIVATED CARBON FOR FOOD INDUSTRY
These series of activated carbon in powder and granular form are made from sawdust and fruit
1. Technology:
These series of activated carbon in powder and granular form are made from sawdust and fruit
shell, activated via physical and chemical methods, under the process of crushing, aftertreatment.
2. Characteristics:
These series of activated carbon with developed mesopore structure, high rapid filtering,
large adsorption volume, short filtering time, good hydrophoby etc.
3. Using fields:
Widely used in liquid phase adsorption,such as refining sugar,beverage,chemical industry,pharmaceutical industry, oil industry, dyeing industry, environmental protection etc. Especially suitable for food industry, sweetening agent such as cane sugar, beet sugar, aspartame, starch sugar,milk sugar, molasses, xylose, xylitol, maltose, glucose, and decolorization, removing colloid in hydrolyzed protein. Beverage such as Coca Cola, Pepsi, food additive, glucide, sodium glutamate, citric acid, pectin, glutin, essence and spice, activated clay etc. Also used for chemical inter- mediate, cystine, glycerin, itaconic acid, optical brightener, gallic acid, decolorization and removing smelling on dihydroxybenzene products, specially good effects on coloring matter with macromolecule adsorption and decolorization.
1. Technology:
These series of activated carbon in powder and granular form are made from sawdust and fruit
shell, activated via physical and chemical methods, under the process of crushing, aftertreatment.
2. Characteristics:
These series of activated carbon with developed mesopore structure, high rapid filtering,
large adsorption volume, short filtering time, good hydrophoby etc.
3. Using fields:
Widely used in liquid phase adsorption,such as refining sugar,beverage,chemical industry,pharmaceutical industry, oil industry, dyeing industry, environmental protection etc. Especially suitable for food industry, sweetening agent such as cane sugar, beet sugar, aspartame, starch sugar,milk sugar, molasses, xylose, xylitol, maltose, glucose, and decolorization, removing colloid in hydrolyzed protein. Beverage such as Coca Cola, Pepsi, food additive, glucide, sodium glutamate, citric acid, pectin, glutin, essence and spice, activated clay etc. Also used for chemical inter- mediate, cystine, glycerin, itaconic acid, optical brightener, gallic acid, decolorization and removing smelling on dihydroxybenzene products, specially good effects on coloring matter with macromolecule adsorption and decolorization.
PAM for water treatment
PAM
PAM emulsion
PAM water treatment.
No mineral oil,no surfactant,no secondary pollution.
PAM
JY FLOC C5700
Most Advanced Technology……….Highly Environmentally Friendly Chemicals
Product Description :water in water cationic polyacrylamide emulsion
JY FLOC C5700 is an advanced, high molecular weight cationic polymer in emulsion form,which does not contain any mineral oil or surfactants. JY FLOC C5700 has negligible toxicity to fish,daphnia,algae,and bacteria.It is quite safe to environment.
Typical Application
JY FLOC C5700 is designed to flocculate suspended solids, and is recommended for the following applications - non-potable raw water clarification, primary and secondary effluent clarification, paper making wastewater treatment, municipal wastewater treatment ,various kinds of industrial wastewater treatment ,oil wastewater clarification.
Product Advantages
-Advantages of (W/W) PAM emulsion over solid products: better solubility, higher efficiency, no powder pollution and realization of automatic addition,lower cost;
- Advantages of (W/W) PAM emulsion over (W/O) PAM emulsion: no oil components and surfactants, no secondary pollution to water, lower cost.
Recommended Treatment
Typical dosage rates for JY FLOC C5700 are as follows - As a flocculant for primary clarification, use 1 to 20 ppm. For in-line filtration, use 1 to 5 ppm. For sewage treatment, use 10 to 200 ppm. For oily wastewater clarification, use 1 to 10 ppm. For further technical assistance please contact JINYU.
Handling
Employees should utilize normal precautions when handling chemical products. The use of a face shield or safety goggles, gloves and apron are recommended when handling this product. JY FLOC C5700 is not toxic or corrosive product. If spilled on skin, into eyes or inhaled, emergent washing is a must. Washing with warm water is better.If the emulsion is spilled on the ground, collection of this emulsion is necessary. Collection of the mixture, after addition of dry sand, followed by washing with water, also works. Be very careful of the spilled emulsion because it is very slippery!The product is forbidden to eat! Review the Material Safety Data Sheet (MSDS) for this product prior to use.
Storage
Store in closed containers, at ambient temperatures. Long-term outside storage should be avoided when possible.
Packaging
JY FLOC C1510 is supplied in 250kg plastic drums or 1000kg IBC .
Typical Chemical and Physical Properties
Specific Gravity g/cm³. . . . . . . . . . . . . . . . . . . . . 1.20
Solubility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Soluble in water.
Appearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Milky white emulsion
Odor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Odorless
Boiling Point, °F . . . . . . . . . . . . . . . . . . . . . . . . . . 180 - 212
pH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.0 – 7.0
Charge degree 60%
©
2002 JINYU Waste Water Treatment ,China. T
el: (86)631-5583632 • Fax: (86)631-5584149
Add:CaoMiaoZi Town,Weihai,Shandong,China
PAM emulsion
PAM water treatment.
No mineral oil,no surfactant,no secondary pollution.
PAM
JY FLOC C5700
Most Advanced Technology……….Highly Environmentally Friendly Chemicals
Product Description :water in water cationic polyacrylamide emulsion
JY FLOC C5700 is an advanced, high molecular weight cationic polymer in emulsion form,which does not contain any mineral oil or surfactants. JY FLOC C5700 has negligible toxicity to fish,daphnia,algae,and bacteria.It is quite safe to environment.
Typical Application
JY FLOC C5700 is designed to flocculate suspended solids, and is recommended for the following applications - non-potable raw water clarification, primary and secondary effluent clarification, paper making wastewater treatment, municipal wastewater treatment ,various kinds of industrial wastewater treatment ,oil wastewater clarification.
Product Advantages
-Advantages of (W/W) PAM emulsion over solid products: better solubility, higher efficiency, no powder pollution and realization of automatic addition,lower cost;
- Advantages of (W/W) PAM emulsion over (W/O) PAM emulsion: no oil components and surfactants, no secondary pollution to water, lower cost.
Recommended Treatment
Typical dosage rates for JY FLOC C5700 are as follows - As a flocculant for primary clarification, use 1 to 20 ppm. For in-line filtration, use 1 to 5 ppm. For sewage treatment, use 10 to 200 ppm. For oily wastewater clarification, use 1 to 10 ppm. For further technical assistance please contact JINYU.
Handling
Employees should utilize normal precautions when handling chemical products. The use of a face shield or safety goggles, gloves and apron are recommended when handling this product. JY FLOC C5700 is not toxic or corrosive product. If spilled on skin, into eyes or inhaled, emergent washing is a must. Washing with warm water is better.If the emulsion is spilled on the ground, collection of this emulsion is necessary. Collection of the mixture, after addition of dry sand, followed by washing with water, also works. Be very careful of the spilled emulsion because it is very slippery!The product is forbidden to eat! Review the Material Safety Data Sheet (MSDS) for this product prior to use.
Storage
Store in closed containers, at ambient temperatures. Long-term outside storage should be avoided when possible.
Packaging
JY FLOC C1510 is supplied in 250kg plastic drums or 1000kg IBC .
Typical Chemical and Physical Properties
Specific Gravity g/cm³. . . . . . . . . . . . . . . . . . . . . 1.20
Solubility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Soluble in water.
Appearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Milky white emulsion
Odor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Odorless
Boiling Point, °F . . . . . . . . . . . . . . . . . . . . . . . . . . 180 - 212
pH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.0 – 7.0
Charge degree 60%
©
2002 JINYU Waste Water Treatment ,China. T
el: (86)631-5583632 • Fax: (86)631-5584149
Add:CaoMiaoZi Town,Weihai,Shandong,China
PAM polyacrylamide
Molecular weight: ion degree 30%-80%; Appearance:white transparent particles; Packing:25KG/woven bag
Specification
Items
Product Name
PAM Polyacrylamide
Appearance
White transparent particles
National Standard
GB 17514-2008
Molecular Weight
Ion degree 30%-80%
Size
≤ 1
Hydrolysis
25%-30%
Remain Monomer
≤0.05%
Solid Content
≥88%
PH Value
1~14
Package
25kg packed in two-layer-film and pp-woven plastic bag
Polyacrylamide, its another name PAM, which is a glassy solid. It is easy to absorb water; the speed of the adsorption should be different according to the features of the ramification plasma. It dissolves in water, also in acetate, glycol, glycerol and amine such kind of organic solvent. It can be decomposed through the long-time heat, and the temperature of the decomposition above 200. In the terms of anaerobic, it could be carbonized into black powder. According to the needs, PAM commonly knows as flocculants, cation, anionic, nonionic with mixer ionic composing four type of products.
Specification
Items
Product Name
PAM Polyacrylamide
Appearance
White transparent particles
National Standard
GB 17514-2008
Molecular Weight
Ion degree 30%-80%
Size
≤ 1
Hydrolysis
25%-30%
Remain Monomer
≤0.05%
Solid Content
≥88%
PH Value
1~14
Package
25kg packed in two-layer-film and pp-woven plastic bag
Polyacrylamide, its another name PAM, which is a glassy solid. It is easy to absorb water; the speed of the adsorption should be different according to the features of the ramification plasma. It dissolves in water, also in acetate, glycol, glycerol and amine such kind of organic solvent. It can be decomposed through the long-time heat, and the temperature of the decomposition above 200. In the terms of anaerobic, it could be carbonized into black powder. According to the needs, PAM commonly knows as flocculants, cation, anionic, nonionic with mixer ionic composing four type of products.
PAM (Flocculating agent)
They can be used as flocculating agent, thickening agent, paper strengthening agent etc., and are widely used in water treatment
Cpolyacrylamids (PAM) include HPAM, CPAM and NPAM. They can be used as flocculating agent, thickening agent, paper strengthening agent etc., and are widely used in water treatment, paper making, petroleum, coals, textiles and construction etc.
Properties: Molecular formula: (CH2CHCONH2)r
PAM is easily soluble in water, almost insoluble in benzene, phenylethane, esters and acetone; its aqueous solution is almost transparent liquid; non-dangerous, non-toxic, non-corrosive; it has good thermal stability at 100
o
C, but will be decomposed at above 150
o
C. Density: (g)ml 23
o
C 1.302; glass transition temperature: 153
o
C.
Spec.
Appearance: white granules
Solid content: ≥88%
Molecular Weight: 6-20 million
HPAM: ionicity: 20%-30%(adjustable)
CPAM: ionicity: 5--60%
NPAM: ionicity1-4%
Item
HPAM
CPAM
NPAM
Zwitterion
Appearance
white granules
white granules
white granules
white granules
Solid content,%
≥90
≥90
≥90
≥90
Molecular Weight.(10,000)
300-2000
300-1500
300-1500
300-1500
Ionicity,%
20-30
5-60
0-3
at any proportions
Insolubles %
≤0.1
≤0.1
≤0.1
≤0.1
Dissolving time (min)
≤40
≤90
≤60
≤90
Cpolyacrylamids (PAM) include HPAM, CPAM and NPAM. They can be used as flocculating agent, thickening agent, paper strengthening agent etc., and are widely used in water treatment, paper making, petroleum, coals, textiles and construction etc.
Properties: Molecular formula: (CH2CHCONH2)r
PAM is easily soluble in water, almost insoluble in benzene, phenylethane, esters and acetone; its aqueous solution is almost transparent liquid; non-dangerous, non-toxic, non-corrosive; it has good thermal stability at 100
o
C, but will be decomposed at above 150
o
C. Density: (g)ml 23
o
C 1.302; glass transition temperature: 153
o
C.
Spec.
Appearance: white granules
Solid content: ≥88%
Molecular Weight: 6-20 million
HPAM: ionicity: 20%-30%(adjustable)
CPAM: ionicity: 5--60%
NPAM: ionicity1-4%
Item
HPAM
CPAM
NPAM
Zwitterion
Appearance
white granules
white granules
white granules
white granules
Solid content,%
≥90
≥90
≥90
≥90
Molecular Weight.(10,000)
300-2000
300-1500
300-1500
300-1500
Ionicity,%
20-30
5-60
0-3
at any proportions
Insolubles %
≤0.1
≤0.1
≤0.1
≤0.1
Dissolving time (min)
≤40
≤90
≤60
≤90
PAM (polyacrylamide)
polyacrylamide(PAM) .
1Anionic polyacrylamide
2.Water treatment pam
3.High molecular weight polyacrylamide
4Paper making
polyacrylamide(PAM)
It is extensively used in fields such as petroleum, water treatment, paper making,mining and metallurgy,building material, textile, food processing, medicine and pharmaceuticals, and agriculture and forestry, etc. It has functions of flocculation, thickening, drag-reduction, gelation,
agglomeration, agglomeration, and scale inhibition, etc.
1Appearance:white granule
2>Molecular weight:5-22 million minimum
3>Granule:20-100 mesh
4>Solid content:88% minimum
5>Hydrolyzing degree:10-20%,20-30% or30-40%
6>Dissolving time: less than one hour (normal degree)
7>Insoluble:0.5% maximum
8>Monomer free:0.05% maximum
1Anionic polyacrylamide
2.Water treatment pam
3.High molecular weight polyacrylamide
4Paper making
polyacrylamide(PAM)
It is extensively used in fields such as petroleum, water treatment, paper making,mining and metallurgy,building material, textile, food processing, medicine and pharmaceuticals, and agriculture and forestry, etc. It has functions of flocculation, thickening, drag-reduction, gelation,
agglomeration, agglomeration, and scale inhibition, etc.
1Appearance:white granule
2>Molecular weight:5-22 million minimum
3>Granule:20-100 mesh
4>Solid content:88% minimum
5>Hydrolyzing degree:10-20%,20-30% or30-40%
6>Dissolving time: less than one hour (normal degree)
7>Insoluble:0.5% maximum
8>Monomer free:0.05% maximum
PAM ,keyuan specilized production
Anionic PAM
1.High-viscosity PAM
2.Flocculant and retention aid
Anionic PAM
PAM is a kind of organic polymer, white or light yellow powder, density is 1.3 with thickening, flocculation, shearing, reduction, etc, PAM valuable properties can be divided into three types: anionic, cation type, nonionic.
Anionic polyacrylamide (300-2000 million) m.w.
The purpose
1, sewage treatment when suspended sewage, the explicit acid polyacrylamide with nonionic flocculants as appropriate. PAM up at bridge role adsorption. Make a suspension of particles to purify the sewage flocculent precipitation. Also can be used for water purification, especially and inorganic flocculant used in water treatment, the best effect.
2 and fixing sand will not dissolve into the polyacrylamide ion concentration of 0.3% join crosslinking agent, spray on the desert may play sand fixing.
3 and oil from water plugging adjust nonionic polyacrylamide and lignocellulose, add certain chemical additives, widely used for oilfield profile plugging agent.
4, soil moisture agents for soil moisture agents and modification of polyacrylamide based raw materials.
Product technical specifications
Name
MolecularWeight(ten thousand)
Ion degrees(%)
Solid Content(%)
remnant
list %
hydrolysis
Dissolve
Time
(min)
CPAM
------ ----
10-50
≥90
≤0.05
20-25
≤40
APAM
600-2000
--- --
≥90
≤0.05
20-30
≤60
1.High-viscosity PAM
2.Flocculant and retention aid
Anionic PAM
PAM is a kind of organic polymer, white or light yellow powder, density is 1.3 with thickening, flocculation, shearing, reduction, etc, PAM valuable properties can be divided into three types: anionic, cation type, nonionic.
Anionic polyacrylamide (300-2000 million) m.w.
The purpose
1, sewage treatment when suspended sewage, the explicit acid polyacrylamide with nonionic flocculants as appropriate. PAM up at bridge role adsorption. Make a suspension of particles to purify the sewage flocculent precipitation. Also can be used for water purification, especially and inorganic flocculant used in water treatment, the best effect.
2 and fixing sand will not dissolve into the polyacrylamide ion concentration of 0.3% join crosslinking agent, spray on the desert may play sand fixing.
3 and oil from water plugging adjust nonionic polyacrylamide and lignocellulose, add certain chemical additives, widely used for oilfield profile plugging agent.
4, soil moisture agents for soil moisture agents and modification of polyacrylamide based raw materials.
Product technical specifications
Name
MolecularWeight(ten thousand)
Ion degrees(%)
Solid Content(%)
remnant
list %
hydrolysis
Dissolve
Time
(min)
CPAM
------ ----
10-50
≥90
≤0.05
20-25
≤40
APAM
600-2000
--- --
≥90
≤0.05
20-30
≤60
PAM @ Polyacrylamide for Water Treatment
Polyacrylamide PAM:
1.Textile Auxiliary Agent
2.Sewage Water Treatment
3.Oil field profile controlling
Polyacrylamide PAM
Physical property
The physical property of PAM is mainly depended on the behavior in the aqueous solution. The outstanding feature is high hydrophilic—can soluble in water by all kinds of proportion.
Its water solution can bear electrolyte well, such as not sensitive to sodium sulfate and ammonia chloride, and is compatible to surfactant.
Chemical reaction
Side group of molecular-chain of PAM is activated amide group that can generate many derivatives through chemical reaction, but it can’t proceed completely because of the adjacent gene reaction.
Anionic polyacrylamide specifications:
Item
C1610
C1620
C1635
C1650
Ion content
Low
Middle
Middle
High
Molecular weight(per 10 thousand)
1000-1200
1000-1200
800-1000
800-1000
Solid content
Min 90%
Min 90%
Min 90%
Min 90%
Free monomer
Max 0.05%
Max 0.05%
Max 0.05%
Max0.05%
Dissolution time
Max 40
Max 40
Max 40
Max 40
Cationic polyacrylamide specifications:
Item
Data
Molecular weight (per 10 thousand)
800-1000
1000-1200
1300-1500
1600-2000
Ion content
25-45
45-55
55-60
65-75
Solid content
88±2%
88±2%
88±2%
88±2%
Hydrolysis degree
20-30
20-30
20-30
20-30
Residual monomer
Max 0.05%
Max 0.05%
Max 0.05%
Max 0.05%
Dissolution time
Max 2h
Max 2h
Max 2h
Max 2h
Appearance
White granules
1.Textile Auxiliary Agent
2.Sewage Water Treatment
3.Oil field profile controlling
Polyacrylamide PAM
Physical property
The physical property of PAM is mainly depended on the behavior in the aqueous solution. The outstanding feature is high hydrophilic—can soluble in water by all kinds of proportion.
Its water solution can bear electrolyte well, such as not sensitive to sodium sulfate and ammonia chloride, and is compatible to surfactant.
Chemical reaction
Side group of molecular-chain of PAM is activated amide group that can generate many derivatives through chemical reaction, but it can’t proceed completely because of the adjacent gene reaction.
Anionic polyacrylamide specifications:
Item
C1610
C1620
C1635
C1650
Ion content
Low
Middle
Middle
High
Molecular weight(per 10 thousand)
1000-1200
1000-1200
800-1000
800-1000
Solid content
Min 90%
Min 90%
Min 90%
Min 90%
Free monomer
Max 0.05%
Max 0.05%
Max 0.05%
Max0.05%
Dissolution time
Max 40
Max 40
Max 40
Max 40
Cationic polyacrylamide specifications:
Item
Data
Molecular weight (per 10 thousand)
800-1000
1000-1200
1300-1500
1600-2000
Ion content
25-45
45-55
55-60
65-75
Solid content
88±2%
88±2%
88±2%
88±2%
Hydrolysis degree
20-30
20-30
20-30
20-30
Residual monomer
Max 0.05%
Max 0.05%
Max 0.05%
Max 0.05%
Dissolution time
Max 2h
Max 2h
Max 2h
Max 2h
Appearance
White granules
PAM @ Polyacrylamide for purification
Polyacrylamide PAM:
1.Textile Auxiliary Agent
2.Sewage Water Treatment
3.Oil field profile controlling
Polyacrylamide PAM
Physical property
The physical property of PAM is mainly depended on the behavior in the aqueous solution. The outstanding feature is high hydrophilic—can soluble in water by all kinds of proportion.
Its water solution can bear electrolyte well, such as not sensitive to sodium sulfate and ammonia chloride, and is compatible to surfactant.
Chemical reaction
Side group of molecular-chain of PAM is activated amide group that can generate many derivatives through chemical reaction, but it can’t proceed completely because of the adjacent gene reaction.
Anionic polyacrylamide specifications:
Item
C1610
C1620
C1635
C1650
Ion content
Low
Middle
Middle
High
Molecular weight(per 10 thousand)
1000-1200
1000-1200
800-1000
800-1000
Solid content
Min 90%
Min 90%
Min 90%
Min 90%
Free monomer
Max 0.05%
Max 0.05%
Max 0.05%
Max0.05%
Dissolution time
Max 40
Max 40
Max 40
Max 40
Cationic polyacrylamide specifications:
Item
Data
Molecular weight (per 10 thousand)
800-1000
1000-1200
1300-1500
1600-2000
Ion content
25-45
45-55
55-60
65-75
Solid content
88±2%
88±2%
88±2%
88±2%
Hydrolysis degree
20-30
20-30
20-30
20-30
Residual monomer
Max 0.05%
Max 0.05%
Max 0.05%
Max 0.05%
Dissolution time
Max 2h
Max 2h
Max 2h
Max 2h
Appearance
White granules
1.Textile Auxiliary Agent
2.Sewage Water Treatment
3.Oil field profile controlling
Polyacrylamide PAM
Physical property
The physical property of PAM is mainly depended on the behavior in the aqueous solution. The outstanding feature is high hydrophilic—can soluble in water by all kinds of proportion.
Its water solution can bear electrolyte well, such as not sensitive to sodium sulfate and ammonia chloride, and is compatible to surfactant.
Chemical reaction
Side group of molecular-chain of PAM is activated amide group that can generate many derivatives through chemical reaction, but it can’t proceed completely because of the adjacent gene reaction.
Anionic polyacrylamide specifications:
Item
C1610
C1620
C1635
C1650
Ion content
Low
Middle
Middle
High
Molecular weight(per 10 thousand)
1000-1200
1000-1200
800-1000
800-1000
Solid content
Min 90%
Min 90%
Min 90%
Min 90%
Free monomer
Max 0.05%
Max 0.05%
Max 0.05%
Max0.05%
Dissolution time
Max 40
Max 40
Max 40
Max 40
Cationic polyacrylamide specifications:
Item
Data
Molecular weight (per 10 thousand)
800-1000
1000-1200
1300-1500
1600-2000
Ion content
25-45
45-55
55-60
65-75
Solid content
88±2%
88±2%
88±2%
88±2%
Hydrolysis degree
20-30
20-30
20-30
20-30
Residual monomer
Max 0.05%
Max 0.05%
Max 0.05%
Max 0.05%
Dissolution time
Max 2h
Max 2h
Max 2h
Max 2h
Appearance
White granules
PAM Anionic
For water treatment, mining and paper mills
1.Appearance: white granule
2.Molecular weight: 5 - 22 million minimum
3. Granule: 20 - 100 mesh
4.Solid content: 88% minimum
5.Hydrolyzing degree: 10 - 20%, 20 - 30% or 30 - 40%
6.Dissolving time: 2 hours maximum (10°C)
7.Insoluble: 0.5% maximum
8.Monomer free: 0.05% maximum
1.Appearance: white granule
2.Molecular weight: 5 - 22 million minimum
3. Granule: 20 - 100 mesh
4.Solid content: 88% minimum
5.Hydrolyzing degree: 10 - 20%, 20 - 30% or 30 - 40%
6.Dissolving time: 2 hours maximum (10°C)
7.Insoluble: 0.5% maximum
8.Monomer free: 0.05% maximum
PAM Hongda Brand Surfactant
Surfactant
1,water adsorption min50%
2,surface area 200-260 sq m/g
3,adsorbent alumina
4,air desiccant
Surfactant
1,wiping off fluorine ion in water
2,adsorbing lubricating oil or oil stream in polluted oxygen, hydrogen and sulfur dioxide.
3,further drying to ethylene and propylene gas,oil cracking gas.
4,drying to fitting of hydrogen and air separation unit&instrument.
5,fluoride treatment of hydrogen peroxide,pollutants such as hydrogen sulfide, carbon dioxide, hydrogen fluoride and hydrocarbons.
6,mostly be fit for defluorination treatment of fluorinated water.
Note.as manufacturer, customerized specifications are available.
We can also offer activated carbon for customers,nutshell/coconut shell/wood powder/coal column
Active carbon(HD-AC01,02,04,05)
Working Principle
Gas or volatile solvent are adsorbed and attached to the solid surface
Specification(QB/216-1995)
name
8-14mm
3~5 mm
4~6 mm
5-7mm
specific gravity (g/ml)
min 0.72
0.66~0.72
0.65~0.70
0.63~0.68
hardness (mohs)
min 50
min 80
min100
min120
rate of wear (%)
max 0.35
max 0.3
max 0.3
max 0.25
specific surface area(sq m/g)
200~260
water adsorption (%)
min 50
moisture (%)
max 1.5
PAC
PAM
1,water adsorption min50%
2,surface area 200-260 sq m/g
3,adsorbent alumina
4,air desiccant
Surfactant
1,wiping off fluorine ion in water
2,adsorbing lubricating oil or oil stream in polluted oxygen, hydrogen and sulfur dioxide.
3,further drying to ethylene and propylene gas,oil cracking gas.
4,drying to fitting of hydrogen and air separation unit&instrument.
5,fluoride treatment of hydrogen peroxide,pollutants such as hydrogen sulfide, carbon dioxide, hydrogen fluoride and hydrocarbons.
6,mostly be fit for defluorination treatment of fluorinated water.
Note.as manufacturer, customerized specifications are available.
We can also offer activated carbon for customers,nutshell/coconut shell/wood powder/coal column
Active carbon(HD-AC01,02,04,05)
Working Principle
Gas or volatile solvent are adsorbed and attached to the solid surface
Specification(QB/216-1995)
name
8-14mm
3~5 mm
4~6 mm
5-7mm
specific gravity (g/ml)
min 0.72
0.66~0.72
0.65~0.70
0.63~0.68
hardness (mohs)
min 50
min 80
min100
min120
rate of wear (%)
max 0.35
max 0.3
max 0.3
max 0.25
specific surface area(sq m/g)
200~260
water adsorption (%)
min 50
moisture (%)
max 1.5
PAC
PAM
PAM In High Molecular Weight
PAM
1.For water treatment, mining and paper mills
2.Anionic Polymer
3.High molecular weight
4.95% min
PAM / Polyacrylamide
Popularly can be called flocculants, PAM has the molecular formula of +CH2-CHn, Linear polymers, molecular weight of 4,000,000—20,000,000, strong flocculation, easily soluble in water, dissolute above 120. It appears white and light-yellow at solid, colorless vicious colloid at liquid.
With this special structure, it can easily adsorb the suspended solids to purify the water thoroughly.
So it is widely used in metallurgy, papermaking, petroleum, chemical industry, textiles and ore dressing.
Application:
1,Mainly used as flocculants: The product is widely used in chemical industry wastewater, wastewater treatment, municipal wastewater treatment.
2,For the oil industry, oil, drilling mud, waste mud treatment, used it to prevent water channeling, reducing friction and enhancing oil recovery is widely used.
3,For textile sizing agent.
4,For the paper industry.
5,For other industries ,such as food industry, synthetic resin coating, civil engineering grouting material plugging, building materials industry, also it can improve the quality of electroplating industry.
Packaging & Delivery:
Packaging Detail:
Package: packed with Kraft bag,25kgs per bag (it is ok to pack the product as customer's requests )
Delivery Detail:
Within 10-15 days after received the deposit or original L/C.
Technical specifications
:
Anionic Polyacrylamide main indicator
Item
Type
C1610
C1620
C1635
C1650
Ion content
law
middle
middle
high
Molecular weight (per 10thousand)
1000-1200
1000-1200
800-1000
800-1000
Solid content/%≥
90
90
90
90
Free Monomer/%≤
0.05
0.05
0.05
0.05
Dissolution time(min)≤
40
40
40
40
Cationic Polyacrylamide main indicator
Item
Molecular weight (per 10 thousands)
800-1000
1000-1200
1300-1500
1600-2000
Ion content
25-45
45-55
55-60
65-75
Solid content%
88±2%
88±2%
88±2%
88±2%
Hydrolysis degree%
20-30
20-30
20-30
20-30
Residual monomer
≤0.05
≤0.05
≤0.05
≤0.05
Dissolution time
≤2h
≤2h
≤2h
≤2h
Appearance
White granular
White granular
White granular
White granular
1.For water treatment, mining and paper mills
2.Anionic Polymer
3.High molecular weight
4.95% min
PAM / Polyacrylamide
Popularly can be called flocculants, PAM has the molecular formula of +CH2-CHn, Linear polymers, molecular weight of 4,000,000—20,000,000, strong flocculation, easily soluble in water, dissolute above 120. It appears white and light-yellow at solid, colorless vicious colloid at liquid.
With this special structure, it can easily adsorb the suspended solids to purify the water thoroughly.
So it is widely used in metallurgy, papermaking, petroleum, chemical industry, textiles and ore dressing.
Application:
1,Mainly used as flocculants: The product is widely used in chemical industry wastewater, wastewater treatment, municipal wastewater treatment.
2,For the oil industry, oil, drilling mud, waste mud treatment, used it to prevent water channeling, reducing friction and enhancing oil recovery is widely used.
3,For textile sizing agent.
4,For the paper industry.
5,For other industries ,such as food industry, synthetic resin coating, civil engineering grouting material plugging, building materials industry, also it can improve the quality of electroplating industry.
Packaging & Delivery:
Packaging Detail:
Package: packed with Kraft bag,25kgs per bag (it is ok to pack the product as customer's requests )
Delivery Detail:
Within 10-15 days after received the deposit or original L/C.
Technical specifications
:
Anionic Polyacrylamide main indicator
Item
Type
C1610
C1620
C1635
C1650
Ion content
law
middle
middle
high
Molecular weight (per 10thousand)
1000-1200
1000-1200
800-1000
800-1000
Solid content/%≥
90
90
90
90
Free Monomer/%≤
0.05
0.05
0.05
0.05
Dissolution time(min)≤
40
40
40
40
Cationic Polyacrylamide main indicator
Item
Molecular weight (per 10 thousands)
800-1000
1000-1200
1300-1500
1600-2000
Ion content
25-45
45-55
55-60
65-75
Solid content%
88±2%
88±2%
88±2%
88±2%
Hydrolysis degree%
20-30
20-30
20-30
20-30
Residual monomer
≤0.05
≤0.05
≤0.05
≤0.05
Dissolution time
≤2h
≤2h
≤2h
≤2h
Appearance
White granular
White granular
White granular
White granular
PAM Polyacrylamide for Purification
Polyacrylamide PAM:
1.Textile Auxiliary Agent
2.Sewage Water Treatment
3.Oil field profile controlling
Polyacrylamide PAM
Physical property
The physical property of PAM is mainly depended on the behavior in the aqueous solution. The outstanding feature is high hydrophilic—can soluble in water by all kinds of proportion.
Its water solution can bear electrolyte well, such as not sensitive to sodium sulfate and ammonia chloride, and is compatible to surfactant.
Chemical reaction
Side group of molecular-chain of PAM is activated amide group that can generate many derivatives through chemical reaction, but it can’t proceed completely because of the adjacent gene reaction.
Anionic polyacrylamide specifications:
Item
C1610
C1620
C1635
C1650
Ion content
Low
Middle
Middle
High
Molecular weight(per 10 thousand)
1000-1200
1000-1200
800-1000
800-1000
Solid content
Min 90%
Min 90%
Min 90%
Min 90%
Free monomer
Max 0.05%
Max 0.05%
Max 0.05%
Max0.05%
Dissolution time
Max 40
Max 40
Max 40
Max 40
Cationic polyacrylamide specifications:
Item
Data
Molecular weight (per 10 thousand)
800-1000
1000-1200
1300-1500
1600-2000
Ion content
25-45
45-55
55-60
65-75
Solid content
88±2%
88±2%
88±2%
88±2%
Hydrolysis degree
20-30
20-30
20-30
20-30
Residual monomer
Max 0.05%
Max 0.05%
Max 0.05%
Max 0.05%
Dissolution time
Max 2h
Max 2h
Max 2h
Max 2h
Appearance
White granules
1.Textile Auxiliary Agent
2.Sewage Water Treatment
3.Oil field profile controlling
Polyacrylamide PAM
Physical property
The physical property of PAM is mainly depended on the behavior in the aqueous solution. The outstanding feature is high hydrophilic—can soluble in water by all kinds of proportion.
Its water solution can bear electrolyte well, such as not sensitive to sodium sulfate and ammonia chloride, and is compatible to surfactant.
Chemical reaction
Side group of molecular-chain of PAM is activated amide group that can generate many derivatives through chemical reaction, but it can’t proceed completely because of the adjacent gene reaction.
Anionic polyacrylamide specifications:
Item
C1610
C1620
C1635
C1650
Ion content
Low
Middle
Middle
High
Molecular weight(per 10 thousand)
1000-1200
1000-1200
800-1000
800-1000
Solid content
Min 90%
Min 90%
Min 90%
Min 90%
Free monomer
Max 0.05%
Max 0.05%
Max 0.05%
Max0.05%
Dissolution time
Max 40
Max 40
Max 40
Max 40
Cationic polyacrylamide specifications:
Item
Data
Molecular weight (per 10 thousand)
800-1000
1000-1200
1300-1500
1600-2000
Ion content
25-45
45-55
55-60
65-75
Solid content
88±2%
88±2%
88±2%
88±2%
Hydrolysis degree
20-30
20-30
20-30
20-30
Residual monomer
Max 0.05%
Max 0.05%
Max 0.05%
Max 0.05%
Dissolution time
Max 2h
Max 2h
Max 2h
Max 2h
Appearance
White granules
PAM Used In Mining Washing
PAC
a.)Good for water treatment
b)Very useful in paper making
c) Industrial treatment and recycling.
PAC
Main Application
Mine Washing:
The product can be used in coal washing tailing centrifugal separation, can be used in sedimentation and filtration of coal powder and coal mud, and can improve the recovery rate of coal powder and the filtration speed.
Textile Auxiliary Agent:
The product can be added with some other chemicals to prepare chemical grout, is used to starch textiles, can improve the adhesive property, penetrability and desizing performance, enables the textile to have electrostatic prevention performance, reduces the desizing rate, and reduces the starch mixing spots, cloth machine breaking efficiency, and falling objects.
Sewage Water Treatment:
When sewage water systems are acidophilic, it is more suitable to select nonionic-polyacrylamide, the product can be matched with flocculating agent PAC, aluminium sulphate and the like, and it has the best effect in water treatment.
Metallurgical Mineral Dressing
:
It can be used in floatation and smelting of Zinc, manganese and copper mines, its leachate and slag can be added into PAM to improve the separation efficiency.
Sand Prevention and Solidification:
The nonionic-polyacrylamide is dissolved into 0.3% concentration, cross-linking agent is added, and the product can be sprayed on desert to prevent and solidify
Cautions:
1) Dissolution operation shall be done in plastic, porcelain and stainless steel agitator tanks and far away from irons
2) It is required to place in cool dry rooms(below 35 celsius degree),and prevent high temperature and sunshine in transportation and storage.
a.)Good for water treatment
b)Very useful in paper making
c) Industrial treatment and recycling.
PAC
Main Application
Mine Washing:
The product can be used in coal washing tailing centrifugal separation, can be used in sedimentation and filtration of coal powder and coal mud, and can improve the recovery rate of coal powder and the filtration speed.
Textile Auxiliary Agent:
The product can be added with some other chemicals to prepare chemical grout, is used to starch textiles, can improve the adhesive property, penetrability and desizing performance, enables the textile to have electrostatic prevention performance, reduces the desizing rate, and reduces the starch mixing spots, cloth machine breaking efficiency, and falling objects.
Sewage Water Treatment:
When sewage water systems are acidophilic, it is more suitable to select nonionic-polyacrylamide, the product can be matched with flocculating agent PAC, aluminium sulphate and the like, and it has the best effect in water treatment.
Metallurgical Mineral Dressing
:
It can be used in floatation and smelting of Zinc, manganese and copper mines, its leachate and slag can be added into PAM to improve the separation efficiency.
Sand Prevention and Solidification:
The nonionic-polyacrylamide is dissolved into 0.3% concentration, cross-linking agent is added, and the product can be sprayed on desert to prevent and solidify
Cautions:
1) Dissolution operation shall be done in plastic, porcelain and stainless steel agitator tanks and far away from irons
2) It is required to place in cool dry rooms(below 35 celsius degree),and prevent high temperature and sunshine in transportation and storage.
PAM competitive price
1.PAM is white granule powder;
2.Molecular Weight:5 - 22 million
3.Packing:25kg/bag
PAM
Product description:
This product is water-soluble polymer. Insoluble in most organic solvents, good flocculation and reduce the friction between the liquid.
3) surface adsorption of molecular polyacrylamide: all kinds of adsorption polargroup particles.
4) enhancing effect: the polyacrylamide with computed by molecular chain mechanical, physics, chemistry, etc, will be dispersed phase involved together, forming mesh, thus enhanced role plays.
Scope of application:
Mainly used for sludge dewatering, solid-liquid separation and the coal dressing wastewater, and the recovery. Other applicable desulfurized wastewater flocculation and dehydration. Can be used in industrial wastewater, the urban sewage treatment.
Used in papermaking industry, can improve the wet strength, improve the paper fibers and small BaoLiuLv packing.
Used for oil drilling geological exploration, with mud materials.
Quality indicator:,
Appearance: white fine powder form.
Cation type cationic degree average molecular weight 0-100 million - 400
Anionic anion degrees from 0 to 100% 1500-2000 average molecular weight
Non-ionic average molecular weight of 1000-1500
Product technical specifications
Name
MolecularWeight(ten thousand)
Ion(%)
Solid Content(%)
remnant
list %
hydrolysis
Dissolve
Time
(min)
CPAM
------ ----
10-50
≥90
≤0.05
20-25
≤40
APAM
600-2000
--- --
≥90
≤0.05
20-30
≤60
2.Molecular Weight:5 - 22 million
3.Packing:25kg/bag
PAM
Product description:
This product is water-soluble polymer. Insoluble in most organic solvents, good flocculation and reduce the friction between the liquid.
3) surface adsorption of molecular polyacrylamide: all kinds of adsorption polargroup particles.
4) enhancing effect: the polyacrylamide with computed by molecular chain mechanical, physics, chemistry, etc, will be dispersed phase involved together, forming mesh, thus enhanced role plays.
Scope of application:
Mainly used for sludge dewatering, solid-liquid separation and the coal dressing wastewater, and the recovery. Other applicable desulfurized wastewater flocculation and dehydration. Can be used in industrial wastewater, the urban sewage treatment.
Used in papermaking industry, can improve the wet strength, improve the paper fibers and small BaoLiuLv packing.
Used for oil drilling geological exploration, with mud materials.
Quality indicator:,
Appearance: white fine powder form.
Cation type cationic degree average molecular weight 0-100 million - 400
Anionic anion degrees from 0 to 100% 1500-2000 average molecular weight
Non-ionic average molecular weight of 1000-1500
Product technical specifications
Name
MolecularWeight(ten thousand)
Ion(%)
Solid Content(%)
remnant
list %
hydrolysis
Dissolve
Time
(min)
CPAM
------ ----
10-50
≥90
≤0.05
20-25
≤40
APAM
600-2000
--- --
≥90
≤0.05
20-30
≤60
PAM for Paper Treatment
PAM
1.For water treatment, mining and paper mills
2.Anionic Polymer
3.High molecular weight
4.95% min
PAM / Polyacrylamide
Popularly can be called flocculants, PAM has the molecular formula of +CH2-CHn, Linear polymers, molecular weight of 4,000,000—20,000,000, strong flocculation, easily soluble in water, dissolute above 120. It appears white and light-yellow at solid, colorless vicious colloid at liquid.
With this special structure, it can easily adsorb the suspended solids to purify the water thoroughly.
So it is widely used in metallurgy, papermaking, petroleum, chemical industry, textiles and ore dressing.
Application:
1,Mainly used as flocculants: The product is widely used in chemical industry wastewater, wastewater treatment, municipal wastewater treatment.
2,For the oil industry, oil, drilling mud, waste mud treatment, used it to prevent water channeling, reducing friction and enhancing oil recovery is widely used.
3,For textile sizing agent.
4,For the paper industry.
5,For other industries ,such as food industry, synthetic resin coating, civil engineering grouting material plugging, building materials industry, also it can improve the quality of electroplating industry.
Packaging & Delivery:
Packaging Detail:
Package: packed with Kraft bag,25kgs per bag (it is ok to pack the product as customer's requests )
Delivery Detail:
Within 10-15 days after received the deposit or original L/C.
Technical specifications
:
Anionic Polyacrylamide main indicator
Item
Type
C1610
C1620
C1635
C1650
Ion content
law
middle
middle
high
Molecular weight (per 10thousand)
1000-1200
1000-1200
800-1000
800-1000
Solid content/%≥
90
90
90
90
Free Monomer/%≤
0.05
0.05
0.05
0.05
Dissolution time(min)≤
40
40
40
40
Cationic Polyacrylamide main indicator
Item
Molecular weight (per 10 thousands)
800-1000
1000-1200
1300-1500
1600-2000
Ion content
25-45
45-55
55-60
65-75
Solid content%
88±2%
88±2%
88±2%
88±2%
Hydrolysis degree%
20-30
20-30
20-30
20-30
Residual monomer
≤0.05
≤0.05
≤0.05
≤0.05
Dissolution time
≤2h
≤2h
≤2h
≤2h
Appearance
White granular
White granular
White granular
White granular
1.For water treatment, mining and paper mills
2.Anionic Polymer
3.High molecular weight
4.95% min
PAM / Polyacrylamide
Popularly can be called flocculants, PAM has the molecular formula of +CH2-CHn, Linear polymers, molecular weight of 4,000,000—20,000,000, strong flocculation, easily soluble in water, dissolute above 120. It appears white and light-yellow at solid, colorless vicious colloid at liquid.
With this special structure, it can easily adsorb the suspended solids to purify the water thoroughly.
So it is widely used in metallurgy, papermaking, petroleum, chemical industry, textiles and ore dressing.
Application:
1,Mainly used as flocculants: The product is widely used in chemical industry wastewater, wastewater treatment, municipal wastewater treatment.
2,For the oil industry, oil, drilling mud, waste mud treatment, used it to prevent water channeling, reducing friction and enhancing oil recovery is widely used.
3,For textile sizing agent.
4,For the paper industry.
5,For other industries ,such as food industry, synthetic resin coating, civil engineering grouting material plugging, building materials industry, also it can improve the quality of electroplating industry.
Packaging & Delivery:
Packaging Detail:
Package: packed with Kraft bag,25kgs per bag (it is ok to pack the product as customer's requests )
Delivery Detail:
Within 10-15 days after received the deposit or original L/C.
Technical specifications
:
Anionic Polyacrylamide main indicator
Item
Type
C1610
C1620
C1635
C1650
Ion content
law
middle
middle
high
Molecular weight (per 10thousand)
1000-1200
1000-1200
800-1000
800-1000
Solid content/%≥
90
90
90
90
Free Monomer/%≤
0.05
0.05
0.05
0.05
Dissolution time(min)≤
40
40
40
40
Cationic Polyacrylamide main indicator
Item
Molecular weight (per 10 thousands)
800-1000
1000-1200
1300-1500
1600-2000
Ion content
25-45
45-55
55-60
65-75
Solid content%
88±2%
88±2%
88±2%
88±2%
Hydrolysis degree%
20-30
20-30
20-30
20-30
Residual monomer
≤0.05
≤0.05
≤0.05
≤0.05
Dissolution time
≤2h
≤2h
≤2h
≤2h
Appearance
White granular
White granular
White granular
White granular
PAM for Water Treatment In Paper Making Industry
PAM for Water Treatment
a.)Good for water treatment
b)Very useful in paper making
c) Industrial treatment and recycling.
PAM for Water Treatment
Non-ionic polyacrylamide is formed by the homopolymerization of acrylamide. It has high purity ,good fuction,wide uses, and its main usages are as follows:
1) It is the raw mateials used for the changed pam, for example, anionic pam .we can get them from the hydrolysis by choosing different types of nonionic pam.
2) Textile industry auxiliary .It can be made into slurry chemicals by adding other additives. For textile sizing, can improve the adhesion, penetration and performance of pulp removal, the fabric has anti-static, reduce sizing rate, plasma cutter to reduce plaque, cloth breakage rate and litter.
3) Agent for the wastewater treatment.
4) Agent for the desert treatment
5) Good way for soil improvement in the dry area.
6) Agent for oil field plugging
7) Can be use in architecture, and paint for interior wall.
Wastewater treatment agent, the textile industry, combating desertification and sand-fixation, soil moisture agent, can also be used in the construction industry, construction glue, interior wall paint and so on.
Specifications
Appearance: white granular powder
Molecular weight(million): ≥18
Water insoluble(wt%): ≤0.1
Ion degree(%):≤5
Dissolving speed ( H): ≤ 2
Residual monomer (%): ≤ 0.1
Solid content(%): ≥ 88
a.)Good for water treatment
b)Very useful in paper making
c) Industrial treatment and recycling.
PAM for Water Treatment
Non-ionic polyacrylamide is formed by the homopolymerization of acrylamide. It has high purity ,good fuction,wide uses, and its main usages are as follows:
1) It is the raw mateials used for the changed pam, for example, anionic pam .we can get them from the hydrolysis by choosing different types of nonionic pam.
2) Textile industry auxiliary .It can be made into slurry chemicals by adding other additives. For textile sizing, can improve the adhesion, penetration and performance of pulp removal, the fabric has anti-static, reduce sizing rate, plasma cutter to reduce plaque, cloth breakage rate and litter.
3) Agent for the wastewater treatment.
4) Agent for the desert treatment
5) Good way for soil improvement in the dry area.
6) Agent for oil field plugging
7) Can be use in architecture, and paint for interior wall.
Wastewater treatment agent, the textile industry, combating desertification and sand-fixation, soil moisture agent, can also be used in the construction industry, construction glue, interior wall paint and so on.
Specifications
Appearance: white granular powder
Molecular weight(million): ≥18
Water insoluble(wt%): ≤0.1
Ion degree(%):≤5
Dissolving speed ( H): ≤ 2
Residual monomer (%): ≤ 0.1
Solid content(%): ≥ 88
PAM for amylum plants (IVY)
PAM
1.Cationic Polyacrylamide
2.Polymer
3.Wastewater Treatment Chemical
PAM
Polyacrylamide is a water soluble high-molecular polymer with a wide scope of usage.
uniform granule,good solubility
Specification
Cationic Polyacrylamide
ITEM
MOLECULAR WEIGHT
CATIONIC DEGREE
C8015
MEDIUM HIGH
LOW
C8020
MEDIUM HIGH
MEDIUM LOW
C8030
MEDIUM HIGH
MEDIUM HIGH
C8040
MEDIUM HIGH
HIGH
C8050
MEDIUM HIGH
ULTRA HIGH
C1205
LOW
HIGH
C1260
HIGH
ULTRA HIGH
C6040
MEDIUM
MEDIUM HIGH
C6050
HIGH
MEDIUM
1.Cationic Polyacrylamide
2.Polymer
3.Wastewater Treatment Chemical
PAM
Polyacrylamide is a water soluble high-molecular polymer with a wide scope of usage.
uniform granule,good solubility
Specification
Cationic Polyacrylamide
ITEM
MOLECULAR WEIGHT
CATIONIC DEGREE
C8015
MEDIUM HIGH
LOW
C8020
MEDIUM HIGH
MEDIUM LOW
C8030
MEDIUM HIGH
MEDIUM HIGH
C8040
MEDIUM HIGH
HIGH
C8050
MEDIUM HIGH
ULTRA HIGH
C1205
LOW
HIGH
C1260
HIGH
ULTRA HIGH
C6040
MEDIUM
MEDIUM HIGH
C6050
HIGH
MEDIUM
PAM for improving water quality
Polyacrylamide(PAM)
Usage:Water Treatment Chemical
High molecular weight
Polyacrylamide(PAM)
Use properties
1) : flocculation PAM can make the suspended material through electric bridge, adsorption, flocculation effect since.
2) springiness: mechanical, through the role of physical and chemical, adhesive.
3) reduction of PAM: can effectively reduce the friction resistance, water flow can trace PAM resistance reduction of 50-80.
4) thickening of PAM: in neutral and acid conditions were, when thickening in 10 PH PAM above to hydrolysis. A half mesh structure, increase
Thick will be more apparent.
PAM principle of introduction
1) flocculation mechanism for flocculation PAM: when BeiXu and surface properties of species, especially the dynamic potential, viscosity, turbidity and suspension PH value, particle surface of potential, is the reason to join polymerization particle surface charge instead PAM, can reduce hydraulic. And potentials,
PAM: 2) adsorption chain Bridges in different particles on the surface, the granular form between polymer bridge, make granules form micelles and settlement.
PAM: 3) surface adsorption of molecules of adsorption polargroup particles.
PAM: 4) improved chain and computed by various machinery, physics, chemistry, etc, will be dispersed phase involved together, forming mesh, thus enhanced role plays.
PAM is water-soluble polymer, insoluble in most organic solvents, good flocculation sex, can reduce the friction resistance between liquid, according to the properties of ionic, can be divided into the points, anionic, cationic and gender type four types.
Product technical specifications
Name
MolecularWeight(ten thousand)
Ion degrees(%)
Solid Content(%)
remnant
list %
hydrolysis
Dissolve
Time
(min)
CPAM
------ ----
10-50
≥90
≤0.05
20-25
≤40
APAM
600-2000
--- --
≥90
≤0.05
20-30
≤60
Usage:Water Treatment Chemical
High molecular weight
Polyacrylamide(PAM)
Use properties
1) : flocculation PAM can make the suspended material through electric bridge, adsorption, flocculation effect since.
2) springiness: mechanical, through the role of physical and chemical, adhesive.
3) reduction of PAM: can effectively reduce the friction resistance, water flow can trace PAM resistance reduction of 50-80.
4) thickening of PAM: in neutral and acid conditions were, when thickening in 10 PH PAM above to hydrolysis. A half mesh structure, increase
Thick will be more apparent.
PAM principle of introduction
1) flocculation mechanism for flocculation PAM: when BeiXu and surface properties of species, especially the dynamic potential, viscosity, turbidity and suspension PH value, particle surface of potential, is the reason to join polymerization particle surface charge instead PAM, can reduce hydraulic. And potentials,
PAM: 2) adsorption chain Bridges in different particles on the surface, the granular form between polymer bridge, make granules form micelles and settlement.
PAM: 3) surface adsorption of molecules of adsorption polargroup particles.
PAM: 4) improved chain and computed by various machinery, physics, chemistry, etc, will be dispersed phase involved together, forming mesh, thus enhanced role plays.
PAM is water-soluble polymer, insoluble in most organic solvents, good flocculation sex, can reduce the friction resistance between liquid, according to the properties of ionic, can be divided into the points, anionic, cationic and gender type four types.
Product technical specifications
Name
MolecularWeight(ten thousand)
Ion degrees(%)
Solid Content(%)
remnant
list %
hydrolysis
Dissolve
Time
(min)
CPAM
------ ----
10-50
≥90
≤0.05
20-25
≤40
APAM
600-2000
--- --
≥90
≤0.05
20-30
≤60
PAM for water treatment (IVY)
PAM:
1.Anionic Polyacrylamide
2.Polymer
3.Wastewater Treatment Chemical
PAM:
Polyacrylamide is a water soluble high-molecular polymer with a wide scope of usage.
uniform granule,good solubility
Specification
Cationic Polyacrylamide
ITEM
MOLECULAR WEIGHT
CATIONIC DEGREE
C8015
MEDIUM HIGH
LOW
C8020
MEDIUM HIGH
MEDIUM LOW
C8030
MEDIUM HIGH
MEDIUM HIGH
C8040
MEDIUM HIGH
HIGH
C8050
MEDIUM HIGH
ULTRA HIGH
C1205
LOW
HIGH
C1260
HIGH
ULTRA HIGH
C6040
MEDIUM
MEDIUM HIGH
C6050
HIGH
MEDIUM
1.Anionic Polyacrylamide
2.Polymer
3.Wastewater Treatment Chemical
PAM:
Polyacrylamide is a water soluble high-molecular polymer with a wide scope of usage.
uniform granule,good solubility
Specification
Cationic Polyacrylamide
ITEM
MOLECULAR WEIGHT
CATIONIC DEGREE
C8015
MEDIUM HIGH
LOW
C8020
MEDIUM HIGH
MEDIUM LOW
C8030
MEDIUM HIGH
MEDIUM HIGH
C8040
MEDIUM HIGH
HIGH
C8050
MEDIUM HIGH
ULTRA HIGH
C1205
LOW
HIGH
C1260
HIGH
ULTRA HIGH
C6040
MEDIUM
MEDIUM HIGH
C6050
HIGH
MEDIUM
PAM in best quality& service(IVY)
PAM
1.Cationic Polyacrylamide
2.Polymer
3.Wastewater Treatment Chemical
PAM:
Polyacrylamide is a water soluble high-molecular polymer with a wide scope of usage.
uniform granule,good solubility
Specification
Cationic Polyacrylamide
ITEM
MOLECULAR WEIGHT
CATIONIC DEGREE
C8015
MEDIUM HIGH
LOW
C8020
MEDIUM HIGH
MEDIUM LOW
C8030
MEDIUM HIGH
MEDIUM HIGH
C8040
MEDIUM HIGH
HIGH
C8050
MEDIUM HIGH
ULTRA HIGH
C1205
LOW
HIGH
C1260
HIGH
ULTRA HIGH
C6040
MEDIUM
MEDIUM HIGH
C6050
HIGH
MEDIUM
1.Cationic Polyacrylamide
2.Polymer
3.Wastewater Treatment Chemical
PAM:
Polyacrylamide is a water soluble high-molecular polymer with a wide scope of usage.
uniform granule,good solubility
Specification
Cationic Polyacrylamide
ITEM
MOLECULAR WEIGHT
CATIONIC DEGREE
C8015
MEDIUM HIGH
LOW
C8020
MEDIUM HIGH
MEDIUM LOW
C8030
MEDIUM HIGH
MEDIUM HIGH
C8040
MEDIUM HIGH
HIGH
C8050
MEDIUM HIGH
ULTRA HIGH
C1205
LOW
HIGH
C1260
HIGH
ULTRA HIGH
C6040
MEDIUM
MEDIUM HIGH
C6050
HIGH
MEDIUM
PAM in good service (IVY)
PAM
1.Cationic Polyacrylamide
2.Polymer
3.Wastewater Treatment Chemical
PAM:
Polyacrylamide is a water soluble high-molecular polymer with a wide scope of usage.
uniform granule,good solubility
Specification
Cationic Polyacrylamide
ITEM
MOLECULAR WEIGHT
CATIONIC DEGREE
C8015
MEDIUM HIGH
LOW
C8020
MEDIUM HIGH
MEDIUM LOW
C8030
MEDIUM HIGH
MEDIUM HIGH
C8040
MEDIUM HIGH
HIGH
C8050
MEDIUM HIGH
ULTRA HIGH
C1205
LOW
HIGH
C1260
HIGH
ULTRA HIGH
C6040
MEDIUM
MEDIUM HIGH
C6050
HIGH
MEDIUM
1.Cationic Polyacrylamide
2.Polymer
3.Wastewater Treatment Chemical
PAM:
Polyacrylamide is a water soluble high-molecular polymer with a wide scope of usage.
uniform granule,good solubility
Specification
Cationic Polyacrylamide
ITEM
MOLECULAR WEIGHT
CATIONIC DEGREE
C8015
MEDIUM HIGH
LOW
C8020
MEDIUM HIGH
MEDIUM LOW
C8030
MEDIUM HIGH
MEDIUM HIGH
C8040
MEDIUM HIGH
HIGH
C8050
MEDIUM HIGH
ULTRA HIGH
C1205
LOW
HIGH
C1260
HIGH
ULTRA HIGH
C6040
MEDIUM
MEDIUM HIGH
C6050
HIGH
MEDIUM
AKD tended to promote neuter glue
AKD tended to promote neuter glue
The products with spray starch effectively in the membrane, as well as paper, the printing
AKD tended to promote neuter glue
1.product introduction
Surface of a paper-making industry is a medicine to increase of paper and board of strength and surface water, pretty, the pressure and smooth and printed on paper surface with performance, etc with a product. this product as with the fibre quality, good and the water, and have relatively strong pressure to increase the ability to function after monomers cooperative with fine features.
2.PRODUCT PERFORMANCE AND CHARACTERISTIC
Under a process, products and fiber good, kind and keep up with starch and other add additive used, the dye is the consistency and coordination, significantly enhance the effect of paper and of tube of flow of water and the pressure on the strength to improve the surface of the page , strength and resistant to water in a substitute for the baptized it and add the paper, a paper back to the phenomenon of which get damp excellent machinery and stability in the operating process of bubbles a little, not to set off for another,It with starch on the surface with a rubber consumption, lower costs, which worked advantages can substitute for imported products.
3.application
The products with spray starch effectively in the membrane, as well as paper, the printing surface of the strength and become, at the same time can also reduce costs and was able to increase production efficiency. in cases of boards and paper surface of tube of adhesive, apply for the baptized in a significant increase and its resistance to water down. the intensity and
4.product technical specification
Appearance milky brown a liquid to a
Effective ingredient 26.0 ± 1.0%
pH4.0
Viscosity ( 25 °C ) 8cps
5.STORAGE
25kg/Barrel
6.technical support
zhanghong Mobile 13563803298 Tel 0538-8920388 QQ 648821027
The products with spray starch effectively in the membrane, as well as paper, the printing
AKD tended to promote neuter glue
1.product introduction
Surface of a paper-making industry is a medicine to increase of paper and board of strength and surface water, pretty, the pressure and smooth and printed on paper surface with performance, etc with a product. this product as with the fibre quality, good and the water, and have relatively strong pressure to increase the ability to function after monomers cooperative with fine features.
2.PRODUCT PERFORMANCE AND CHARACTERISTIC
Under a process, products and fiber good, kind and keep up with starch and other add additive used, the dye is the consistency and coordination, significantly enhance the effect of paper and of tube of flow of water and the pressure on the strength to improve the surface of the page , strength and resistant to water in a substitute for the baptized it and add the paper, a paper back to the phenomenon of which get damp excellent machinery and stability in the operating process of bubbles a little, not to set off for another,It with starch on the surface with a rubber consumption, lower costs, which worked advantages can substitute for imported products.
3.application
The products with spray starch effectively in the membrane, as well as paper, the printing surface of the strength and become, at the same time can also reduce costs and was able to increase production efficiency. in cases of boards and paper surface of tube of adhesive, apply for the baptized in a significant increase and its resistance to water down. the intensity and
4.product technical specification
Appearance milky brown a liquid to a
Effective ingredient 26.0 ± 1.0%
pH4.0
Viscosity ( 25 °C ) 8cps
5.STORAGE
25kg/Barrel
6.technical support
zhanghong Mobile 13563803298 Tel 0538-8920388 QQ 648821027
PAM manufacturer
1.Sewage treatment
2.Quality assurance and fast delivery
3.PAM has strong flocculation effect
PAM principle of introduction
1) flocculation mechanism: polyacrylamide for flocculation, BeiXu and surface properties of species, especially the dynamic potential, viscosity, turbidity and suspension PH value, particle surface of potential, is the reason to join polymerization particle surface charge instead PAM, can reduce hydraulic. And potentials,
2) adsorption of polyacrylamide molecular chain Bridges: fixed in different particles on the surface, the granular form between polymer bridge, make granules form micelles and settlement.
3) surface adsorption of molecular polyacrylamide: all kinds of adsorption polargroup particles.
4) enhancing effect: the polyacrylamide with computed by molecular chain mechanical, physics, chemistry, etc, will be dispersed phase involved together, forming mesh, thus enhanced role plays.
Product technical specifications
Name
MolecularWeight(ten thousand)
Ion
(%)
Solid Content(%)
remnant
list %
hydrolysis
Dissolve
Time
(min)
CPAM
------ ----
10-50
≥90
≤0.05
20-25
≤40
APAM
600-2000
--- --
≥90
≤0.05
20-30
≤60
2.Quality assurance and fast delivery
3.PAM has strong flocculation effect
PAM principle of introduction
1) flocculation mechanism: polyacrylamide for flocculation, BeiXu and surface properties of species, especially the dynamic potential, viscosity, turbidity and suspension PH value, particle surface of potential, is the reason to join polymerization particle surface charge instead PAM, can reduce hydraulic. And potentials,
2) adsorption of polyacrylamide molecular chain Bridges: fixed in different particles on the surface, the granular form between polymer bridge, make granules form micelles and settlement.
3) surface adsorption of molecular polyacrylamide: all kinds of adsorption polargroup particles.
4) enhancing effect: the polyacrylamide with computed by molecular chain mechanical, physics, chemistry, etc, will be dispersed phase involved together, forming mesh, thus enhanced role plays.
Product technical specifications
Name
MolecularWeight(ten thousand)
Ion
(%)
Solid Content(%)
remnant
list %
hydrolysis
Dissolve
Time
(min)
CPAM
------ ----
10-50
≥90
≤0.05
20-25
≤40
APAM
600-2000
--- --
≥90
≤0.05
20-30
≤60
PAM oil field accessory ingredient
PAM
1.pam is easy to dissolve
2.best Price and first quality
3.pam's certificate:ISO9001
PAM
water treatment chemicals has a high purity and a fast dissolving speed.It isused to Industry sewage treatment,paper-making industry.water treatment
pam Features:
1) Appearance: white granule
2) Molecular weight: 5 - 22 million minimum
3) Granule: 20 - 100 mesh
4) Solid content: 88% minimum
5) Hydrolyzing degree: 10 - 20%, 20 - 30% or 30 - 40%
6) Dissolving time: 2 hours maximum (10°C)
7) Insoluble: 0.5% maximum
8) Monomer free: 0.05% maximum
pam applications
1, oil field exploration and development, geology, water conservancy,
coal exploration.
2, used for drinking water purification, water purification, municipal sewage sludge, municipal solid waste and industrial effluent;
3, paper-making industry for the clarification of liquid caustic soda, fiber dispersing agent, can improve the beating, the filler retention agents, paper strengthening agent, can be used to improve the treatment rate and the white water recovery;
4, used in textile, carpet industry, sizing, quick-setting cement, synthetic resin coating. Photosensitive polymers, adhesives, dispersing agent, as well as agricultural soil gel, slurry stabilizers, soil amendments;
5, the sugar syrup for the industry to clarify the agent;
6, can be used as aquaculture feed additives and adhesives;
7, oil field water treatment to deal with the recovery of oil.
Polyacrylamide anion type PAM quality indexes:
Item
C1610
C1620
C1635
C1650
Ion Density
low
Middle
Middle
High
Molecular Weight (ten thousand)
1000-1200
1000-1200
800-1000
800-1000
Solid Content ≥%
90
90
90
90
Free Monomer≤%
0.05
0.05
0.05
0.05
Dissolved Time ≤min
40
40
40
40
Polyacrylamide cation type PAM quality indexes:
Test Item/Molecular Weight
800-1000
1000-1200
1300-1500
1600-2000
Ion Density
25-45
45-55
55-60
65-75
Solid Content %
88±2%
88±2%
88±2%
88±2%
Hydrolysis Degree %
20-30
20-30
20-30
20-30
Remain Monomer
≤0.05
≤0.05
≤0.05
≤0.05
Dissolved Time
≤2h
≤2h
≤2h
≤2h
1.pam is easy to dissolve
2.best Price and first quality
3.pam's certificate:ISO9001
PAM
water treatment chemicals has a high purity and a fast dissolving speed.It isused to Industry sewage treatment,paper-making industry.water treatment
pam Features:
1) Appearance: white granule
2) Molecular weight: 5 - 22 million minimum
3) Granule: 20 - 100 mesh
4) Solid content: 88% minimum
5) Hydrolyzing degree: 10 - 20%, 20 - 30% or 30 - 40%
6) Dissolving time: 2 hours maximum (10°C)
7) Insoluble: 0.5% maximum
8) Monomer free: 0.05% maximum
pam applications
1, oil field exploration and development, geology, water conservancy,
coal exploration.
2, used for drinking water purification, water purification, municipal sewage sludge, municipal solid waste and industrial effluent;
3, paper-making industry for the clarification of liquid caustic soda, fiber dispersing agent, can improve the beating, the filler retention agents, paper strengthening agent, can be used to improve the treatment rate and the white water recovery;
4, used in textile, carpet industry, sizing, quick-setting cement, synthetic resin coating. Photosensitive polymers, adhesives, dispersing agent, as well as agricultural soil gel, slurry stabilizers, soil amendments;
5, the sugar syrup for the industry to clarify the agent;
6, can be used as aquaculture feed additives and adhesives;
7, oil field water treatment to deal with the recovery of oil.
Polyacrylamide anion type PAM quality indexes:
Item
C1610
C1620
C1635
C1650
Ion Density
low
Middle
Middle
High
Molecular Weight (ten thousand)
1000-1200
1000-1200
800-1000
800-1000
Solid Content ≥%
90
90
90
90
Free Monomer≤%
0.05
0.05
0.05
0.05
Dissolved Time ≤min
40
40
40
40
Polyacrylamide cation type PAM quality indexes:
Test Item/Molecular Weight
800-1000
1000-1200
1300-1500
1600-2000
Ion Density
25-45
45-55
55-60
65-75
Solid Content %
88±2%
88±2%
88±2%
88±2%
Hydrolysis Degree %
20-30
20-30
20-30
20-30
Remain Monomer
≤0.05
≤0.05
≤0.05
≤0.05
Dissolved Time
≤2h
≤2h
≤2h
≤2h
PAM polyacrylamide
1. we can offer PAM.
2. cationic, anionic, nonionic, PAM
3. free sample
4. 95%
we can offer PAM.
4 types of PAM cationic, anionic, nonionic, PAM
Polyacrylamide PAM
1.strong water-soluble
2.thermal stability
3.Non-dangerous, non-toxic, non-corrosive
4,8-24million
Polyacrylamide PAM
Product performance
1. It is mainly used for sludge dewatering,beneficiation, coal washing and separation of solid and liquid.
2. It can be used for disposal of industrial sewage and daily waste water.
3. It is excellent for paper making and oil field development.
Quality Index
Index
Cation microemulsion
Anion microemulsion
Non-ion microemulsion
Zwitterion microemulsion
Appearance
Semitransparent white emulsion
Molecular weight Ionization rate
8-12 million
Over 20 million
8-12 million
1-6 million
Solid content
40-50%
30-40%
20-30%
≤30%
30-40%
Cation 10-50%
Anion 10-25%
≤30%
Effective PH value
1-10
7-14
1-8
1-14
Insoluble substances
None
None
None
None
Residual monomer
≤0.1%
≤0.1%
≤0.1%
≤0.1%
Solubility(normal temperature)
3 minutes
3 minutes
3 minutes
3 minutes
Usage
1.Working concentration of cation and zwitterions microemulsions shall be 0.1-0.3% cation and anion are 0.05-0.3%
2.Tests shall be done to choose needed quantity for different objects.
Cautions
1. Dissolution operation shall be done in plastic, porcelain and stainless steel agitator tanks and far away from irons
2. It is required to place in cool dry rooms(below 35 celsius degree),and prevent high temperature and sunshine in transportation and storage.
2. cationic, anionic, nonionic, PAM
3. free sample
4. 95%
we can offer PAM.
4 types of PAM cationic, anionic, nonionic, PAM
Polyacrylamide PAM
1.strong water-soluble
2.thermal stability
3.Non-dangerous, non-toxic, non-corrosive
4,8-24million
Polyacrylamide PAM
Product performance
1. It is mainly used for sludge dewatering,beneficiation, coal washing and separation of solid and liquid.
2. It can be used for disposal of industrial sewage and daily waste water.
3. It is excellent for paper making and oil field development.
Quality Index
Index
Cation microemulsion
Anion microemulsion
Non-ion microemulsion
Zwitterion microemulsion
Appearance
Semitransparent white emulsion
Molecular weight Ionization rate
8-12 million
Over 20 million
8-12 million
1-6 million
Solid content
40-50%
30-40%
20-30%
≤30%
30-40%
Cation 10-50%
Anion 10-25%
≤30%
Effective PH value
1-10
7-14
1-8
1-14
Insoluble substances
None
None
None
None
Residual monomer
≤0.1%
≤0.1%
≤0.1%
≤0.1%
Solubility(normal temperature)
3 minutes
3 minutes
3 minutes
3 minutes
Usage
1.Working concentration of cation and zwitterions microemulsions shall be 0.1-0.3% cation and anion are 0.05-0.3%
2.Tests shall be done to choose needed quantity for different objects.
Cautions
1. Dissolution operation shall be done in plastic, porcelain and stainless steel agitator tanks and far away from irons
2. It is required to place in cool dry rooms(below 35 celsius degree),and prevent high temperature and sunshine in transportation and storage.
PAM polyacrylamide
1. we can offer PAM.
2. cationic, anionic, nonionic, PAM
3. free sample
4. 95%
we can offer PAM.
1.PAM about 95%
2.PAM, Anionic Polyacrylamide
3.white granule and powder
4.Molecular weight: 5 - 25million
5.Monomer free: 0.05% max
Anionic PAM, Polyacrylamide
Features:
1) Appearance: white granule
2) Molecular weight: 5 - 22 million minimum
3) Granule: 20 - 100 mesh
4) Solid content: 88% minimum
5) Hydrolyzing degree: 10 - 20%, 20 - 30% or 30 - 40%
6) Dissolving time: 2 hours maximum (10°C)
7) Insoluble: 0.5% maximum
8) Monomer free: 0.05% maximum
Packing:
25kg/plastic enhanced paper bags with inner plastic bag, 25kg/PE bags
2. cationic, anionic, nonionic, PAM
3. free sample
4. 95%
we can offer PAM.
1.PAM about 95%
2.PAM, Anionic Polyacrylamide
3.white granule and powder
4.Molecular weight: 5 - 25million
5.Monomer free: 0.05% max
Anionic PAM, Polyacrylamide
Features:
1) Appearance: white granule
2) Molecular weight: 5 - 22 million minimum
3) Granule: 20 - 100 mesh
4) Solid content: 88% minimum
5) Hydrolyzing degree: 10 - 20%, 20 - 30% or 30 - 40%
6) Dissolving time: 2 hours maximum (10°C)
7) Insoluble: 0.5% maximum
8) Monomer free: 0.05% maximum
Packing:
25kg/plastic enhanced paper bags with inner plastic bag, 25kg/PE bags
PAM polyacrylamide
1.PAM
2.Polyacrylamide
3.Sludge dewatering
4.Coagulant aid
5.PAM for paper making
PAM
This product is technically named Polyacrylamide, which is a water soluble macromolecular polymer. It is insoluble in most organic solvents. It generates a good flocculation and reduces the resistance between liquids.
Item
Index
Appearance
white sand-like powder or colorless transparent colloid
Molecular Weight
4-13 million
Anionic Degree
0-100%
Note:We can supply different Molecular Weight and Cationic Degree as customer request.
1.It is recommended to prepare the product in water solution at 0.1% concentration. It is proposed to use the neutral and desalted water.
2.The product should be scattered evenly in the stirred water, and the dissolving can be accelerated by warming the water (below 60°C).
3.The most economical dosage can be determined based by a preliminary test.
4.The solid product is packed in inner plastic bags and further in polypropylene woven bags with each bag containing 25Kg.The colloidal product is packed in inner plastic bags and further in fiber plate drums with each drum containing 50Kg or 200Kg.
5.This product is hygroscopic, so it is should be sealed and stored in a dry and cool place below 35°C.
6.The solid product should be prevented from leaking on the ground because the hygroscopic powder can make the floor slippery.
2.Polyacrylamide
3.Sludge dewatering
4.Coagulant aid
5.PAM for paper making
PAM
This product is technically named Polyacrylamide, which is a water soluble macromolecular polymer. It is insoluble in most organic solvents. It generates a good flocculation and reduces the resistance between liquids.
Item
Index
Appearance
white sand-like powder or colorless transparent colloid
Molecular Weight
4-13 million
Anionic Degree
0-100%
Note:We can supply different Molecular Weight and Cationic Degree as customer request.
1.It is recommended to prepare the product in water solution at 0.1% concentration. It is proposed to use the neutral and desalted water.
2.The product should be scattered evenly in the stirred water, and the dissolving can be accelerated by warming the water (below 60°C).
3.The most economical dosage can be determined based by a preliminary test.
4.The solid product is packed in inner plastic bags and further in polypropylene woven bags with each bag containing 25Kg.The colloidal product is packed in inner plastic bags and further in fiber plate drums with each drum containing 50Kg or 200Kg.
5.This product is hygroscopic, so it is should be sealed and stored in a dry and cool place below 35°C.
6.The solid product should be prevented from leaking on the ground because the hygroscopic powder can make the floor slippery.
PAM polyacrylamide
1. we can offer PAM.
2. cationic, anionic, nonionic, PAM
3. free sample
4. 95%
we can offer PAM.
1. Anionic pam
2.Water pam
3.pam flocculant
4.ploymer
5.waste water treatment chemicals
1.PAM about 95%
2.PAM, Anionic Polyacrylamide
3.white granule
4.Molecular weight: 5 - 25million
5.Monomer free: 0.05% max
Anionic PAM, Polyacrylamide
Features:
1) Appearance: white granule
2) Molecular weight: 5 - 22 million minimum
3) Granule: 20 - 100 mesh
4) Solid content: 88% minimum
5) Hydrolyzing degree: 10 - 20%, 20 - 30% or 30 - 40%
6) Dissolving time: 2 hours maximum (10°C)
7) Insoluble: 0.5% maximum
8) Monomer free: 0.05% maximum
Packing:
25kg/plastic enhanced paper bags with inner plastic bag, 25kg/PE bags
2. cationic, anionic, nonionic, PAM
3. free sample
4. 95%
we can offer PAM.
1. Anionic pam
2.Water pam
3.pam flocculant
4.ploymer
5.waste water treatment chemicals
1.PAM about 95%
2.PAM, Anionic Polyacrylamide
3.white granule
4.Molecular weight: 5 - 25million
5.Monomer free: 0.05% max
Anionic PAM, Polyacrylamide
Features:
1) Appearance: white granule
2) Molecular weight: 5 - 22 million minimum
3) Granule: 20 - 100 mesh
4) Solid content: 88% minimum
5) Hydrolyzing degree: 10 - 20%, 20 - 30% or 30 - 40%
6) Dissolving time: 2 hours maximum (10°C)
7) Insoluble: 0.5% maximum
8) Monomer free: 0.05% maximum
Packing:
25kg/plastic enhanced paper bags with inner plastic bag, 25kg/PE bags
PAM strengthening agent RB-307
1. good effect of retention,
2.anti-high temperture ability
3.good electric conductance.
PAM strengthening agent RB-307
1. specification:
Appearance thick water solution
Solid contents 15±0.5 %
pH 3.0-5.0
Viscosity25: 3,000-12,000mPa.s
Density25: 1.04
Ionicity amphoteric ion
2. characteristic:
1) It remains stable strengthening effect when the paper making conditions changed, low dosage.
2) Can keep good strengthening effect in environment of clear water cycle system especially with high temperature and high conductivity.
3) It can be used as a strong retention aids for chemicals.
4) Particularly suitable for the domestic pulp systems of high usage of waste paper, and the neutral system with small amount of aluminum sulfate.
3. Usage
1) Dilute (usually in 15-30 time) with ordinary clean water. (Please do not use the water with a lot of impurity such as white water etc.)Please add into the pulp as evenly dispersed as possible.
2) The add position must be the place where the product and the pulp can mix evenly. Generally it is added in stork porportioner or proportioning box.
3 ) The container and piping which we recommend are FRPon containers will cause corrosion and sticky,
4) Do not be used with other chemicals
5).The quality of the expired products will be declined.
6) Being acidic, please flush with running water in case of the skin contact Flush and get medical attention in case of eye contact. Spit it out and get medical attention in case of mis-drinking.
2.anti-high temperture ability
3.good electric conductance.
PAM strengthening agent RB-307
1. specification:
Appearance thick water solution
Solid contents 15±0.5 %
pH 3.0-5.0
Viscosity25: 3,000-12,000mPa.s
Density25: 1.04
Ionicity amphoteric ion
2. characteristic:
1) It remains stable strengthening effect when the paper making conditions changed, low dosage.
2) Can keep good strengthening effect in environment of clear water cycle system especially with high temperature and high conductivity.
3) It can be used as a strong retention aids for chemicals.
4) Particularly suitable for the domestic pulp systems of high usage of waste paper, and the neutral system with small amount of aluminum sulfate.
3. Usage
1) Dilute (usually in 15-30 time) with ordinary clean water. (Please do not use the water with a lot of impurity such as white water etc.)Please add into the pulp as evenly dispersed as possible.
2) The add position must be the place where the product and the pulp can mix evenly. Generally it is added in stork porportioner or proportioning box.
3 ) The container and piping which we recommend are FRPon containers will cause corrosion and sticky,
4) Do not be used with other chemicals
5).The quality of the expired products will be declined.
6) Being acidic, please flush with running water in case of the skin contact Flush and get medical attention in case of eye contact. Spit it out and get medical attention in case of mis-drinking.
Friday, August 19, 2011
PAM used for paper mill
PAM:
1.High-efficient flocculant effect
2.Widely used in all kinds of industrial wastewater and sewage treatment.
PAM
is a kind of organic polymer(white or light yellow powder), its density is 1.3 with thickening, flocculation, shearing, reduction, etc. PAM can be divided into three types: anionic type, cation type, nonionic type.
Anionic polyacrylamide (300-2000 million) m.w.
Scope of application:
Mainly used for sludge dewatering, solid-liquid separation and the coal dressing wastewater, and the recovery. Other applicable desulfurized wastewater flocculation and dehydration. Can be used in industrial wastewater, the urban sewage treatment.
Used in papermaking industry, can improve the wet strength, improve the paper fibers and small BaoLiuLv packing.
Used for oil drilling geological exploration, with mud materials.
Method of use:
This product is a concentration of aqueous 0.1% to use neutral excluding salt water advisable. This product will be dissolved, then stir evenly into the water, proper heating (< 60 ° c) can be accelerated to dissolve. Through the test, the product the best dosing quantity, adjust the water with optimal pH value. Storage and packing: packing solid product use polypropylene woven bags of 50kgs with inner plastic bags, 25 kg, Colloidal body use fiber barrels packaging, plastic, 200kg or 50kg per barrel. This product has hygroscopic, sealed in a cool and dry place, the temperature is lower than 35 degrees Celsius. Solid products and on the ground, avoid to prevent product after hygroscopic to become slippery.
Product technical specifications
Name
MolecularWeight(ten thousand)
Ion(%)
Solid Content(%)
remnant
list %
hydrolysis
Dissolve
Time
(min)
CPAM
------ ----
10-50
≥90
≤0.05
20-25
≤40
APAM
600-2000
--- --
≥90
≤0.05
20-30
≤60
1.High-efficient flocculant effect
2.Widely used in all kinds of industrial wastewater and sewage treatment.
PAM
is a kind of organic polymer(white or light yellow powder), its density is 1.3 with thickening, flocculation, shearing, reduction, etc. PAM can be divided into three types: anionic type, cation type, nonionic type.
Anionic polyacrylamide (300-2000 million) m.w.
Scope of application:
Mainly used for sludge dewatering, solid-liquid separation and the coal dressing wastewater, and the recovery. Other applicable desulfurized wastewater flocculation and dehydration. Can be used in industrial wastewater, the urban sewage treatment.
Used in papermaking industry, can improve the wet strength, improve the paper fibers and small BaoLiuLv packing.
Used for oil drilling geological exploration, with mud materials.
Method of use:
This product is a concentration of aqueous 0.1% to use neutral excluding salt water advisable. This product will be dissolved, then stir evenly into the water, proper heating (< 60 ° c) can be accelerated to dissolve. Through the test, the product the best dosing quantity, adjust the water with optimal pH value. Storage and packing: packing solid product use polypropylene woven bags of 50kgs with inner plastic bags, 25 kg, Colloidal body use fiber barrels packaging, plastic, 200kg or 50kg per barrel. This product has hygroscopic, sealed in a cool and dry place, the temperature is lower than 35 degrees Celsius. Solid products and on the ground, avoid to prevent product after hygroscopic to become slippery.
Product technical specifications
Name
MolecularWeight(ten thousand)
Ion(%)
Solid Content(%)
remnant
list %
hydrolysis
Dissolve
Time
(min)
CPAM
------ ----
10-50
≥90
≤0.05
20-25
≤40
APAM
600-2000
--- --
≥90
≤0.05
20-30
≤60
PAM used in water purification, paper-making(IVY)
Polyacrylamide
1.Cationic Polyacrylamide
2.Polymer
3.Wastewater Treatment Chemical
Polyacrylamide
Polyacrylamide is a water soluble high-molecular polymer with a wide scope of usage.
uniform granule,good solubility
Specification
Cationic Polyacrylamide
ITEM
MOLECULAR WEIGHT
CATIONIC DEGREE
C8015
MEDIUM HIGH
LOW
C8020
MEDIUM HIGH
MEDIUM LOW
C8030
MEDIUM HIGH
MEDIUM HIGH
C8040
MEDIUM HIGH
HIGH
C8050
MEDIUM HIGH
ULTRA HIGH
C1205
LOW
HIGH
C1260
HIGH
ULTRA HIGH
C6040
MEDIUM
MEDIUM HIGH
C6050
HIGH
MEDIUM
1.Cationic Polyacrylamide
2.Polymer
3.Wastewater Treatment Chemical
Polyacrylamide
Polyacrylamide is a water soluble high-molecular polymer with a wide scope of usage.
uniform granule,good solubility
Specification
Cationic Polyacrylamide
ITEM
MOLECULAR WEIGHT
CATIONIC DEGREE
C8015
MEDIUM HIGH
LOW
C8020
MEDIUM HIGH
MEDIUM LOW
C8030
MEDIUM HIGH
MEDIUM HIGH
C8040
MEDIUM HIGH
HIGH
C8050
MEDIUM HIGH
ULTRA HIGH
C1205
LOW
HIGH
C1260
HIGH
ULTRA HIGH
C6040
MEDIUM
MEDIUM HIGH
C6050
HIGH
MEDIUM
PAM with competitive price
PAM is an important water-soluble compound with the properties of flocculation ,thickening ,cut-resisting ,etc.
PAM
PAM is a kind of organic polymer, white or light yellow powder, density is 1.3 with thickening, flocculation, shearing, reduction, etc, PAM valuable properties can be divided into three types: anionic, cation type, nonionic.
Anionic polyacrylamide (300-2000 million) m.w.
Flocculating mechanism are: polyacrylamide polar amide groups, amide groups by hydrogen bonds easily adsorbed in the sediment. In addition, polyacrylamide flocculants have a long molecular chain, the length of 100A °, but the chain width of only 1A °, a large number of level of long-chain absorption in the water with a huge surface area, the flocculation is good, also use long-chain bridging between the particles in the flocculation, floc formation of large particles, accelerated sedimentation.
APAM with acrylamide were together before adding alkali hydrolysis process, by granulation, drying, grinding, the product appearance of small white granules or powder-like solid. Anionic PAM flocculants applied to the surface of positively charged particles in the slurry, and cationic compared to its high molecular weight, molecular stretching in the water with larger, so it has good properties of the particles of floc. Suspended solids can be effectively used for mineral separation settlement. Except for blast furnace, aluminum, paper and other waste water treatment, also used in treatment of a city under treatment.
Name
MolecularWeight(ten thousand)
Ion(%)
Solid Content(%)
remnant
list %
hydrolysis
Dissolve
Time
(min)
CPAM
------ ----
10-50
90min
≤0.05
20-25
≤40
APAM
600-2000
--- --
90min
≤0.05
20-30
≤60
PAM
PAM is a kind of organic polymer, white or light yellow powder, density is 1.3 with thickening, flocculation, shearing, reduction, etc, PAM valuable properties can be divided into three types: anionic, cation type, nonionic.
Anionic polyacrylamide (300-2000 million) m.w.
Flocculating mechanism are: polyacrylamide polar amide groups, amide groups by hydrogen bonds easily adsorbed in the sediment. In addition, polyacrylamide flocculants have a long molecular chain, the length of 100A °, but the chain width of only 1A °, a large number of level of long-chain absorption in the water with a huge surface area, the flocculation is good, also use long-chain bridging between the particles in the flocculation, floc formation of large particles, accelerated sedimentation.
APAM with acrylamide were together before adding alkali hydrolysis process, by granulation, drying, grinding, the product appearance of small white granules or powder-like solid. Anionic PAM flocculants applied to the surface of positively charged particles in the slurry, and cationic compared to its high molecular weight, molecular stretching in the water with larger, so it has good properties of the particles of floc. Suspended solids can be effectively used for mineral separation settlement. Except for blast furnace, aluminum, paper and other waste water treatment, also used in treatment of a city under treatment.
Name
MolecularWeight(ten thousand)
Ion(%)
Solid Content(%)
remnant
list %
hydrolysis
Dissolve
Time
(min)
CPAM
------ ----
10-50
90min
≤0.05
20-25
≤40
APAM
600-2000
--- --
90min
≤0.05
20-30
≤60
AKD wax
AKD wax is used in paper-making .
Technical Data Sheet
Specifications:
PURITY: ≥90%
MELTING POINT:
48-50
FFA(FREE FATTY ACID): ≤2.0%
WEIGHT LOSS: ≤1.5%
APPEARANCE: GRANULAR IVORY-WHITE,YELLOWISH SOLID
ACIDITY: 2.15%
ALKY LENGTH: C16/C18=40/60
Packing & storage:
Standard export package is 25kg woven bag with PE liner.
Store in dry,ventilated place, with temperature not exceeding 35 .
AKD wax is used in paper-making .
Technical Data Sheet
Specifications:
PURITY: ≥90%
MELTING POINT:
48-50
FFA(FREE FATTY ACID): ≤2.0%
WEIGHT LOSS: ≤1.5%
APPEARANCE: GRANULAR IVORY-WHITE,YELLOWISH SOLID
ACIDITY: 2.15%
ALKY LENGTH: C16/C18=40/60
Packing & storage:
Standard export package is 25kg woven bag with PE liner.
Store in dry,ventilated place, with temperature not exceeding 35 .
AKD wax is used in paper-making .
PAM with ex-factory price
1.PAM is white powder;
2.Have strong flocculation effect
3.Water treatment chemicals
PAM flocculation mechanism is: the polyacrylamide with polarity amide groups, the hydrogen bonding interaction was borrowed in groups to surface sediment particle adsorption. In addition, PAM flocculant has long molecular chain, its length is the chain, but the 100A °, big width only 1A ° magnitude of long chain in the water surface, with huge adsorption of its flocculation effect is good, still can use long chain Bridges between particles in flocculation, big particles, accelerate flocculating sedimentation.
Main purpose:
1, used for sludge dewatering, 2, used for sewage and organic wastewater treatment, Three, use of water of river water plant water treatment flocculant. Usage, the effect is good, the cost is low. Especially, and the inorganic flocculant with better use. It will be along the Yangtze river, the Yellow River basin and the other the waterworks flocculent efficiency.
Non ionic polyacrylamide
This company is non ionic polyacrylamide with acrylamide homopolymerization and into. High purity, good performance, high molecular weight dissolved.
Name
MolecularWeight(ten thousand)
Ion
(%)
Solid Content(%)
remnant
list %
hydrolysis
Dissolve
Time
(min)
CPAM
------ ----
10-50
≥90
≤0.05
20-25
≤40
APAM
600-2000
--- --
≥90
≤0.05
20-30
≤60
2.Have strong flocculation effect
3.Water treatment chemicals
PAM flocculation mechanism is: the polyacrylamide with polarity amide groups, the hydrogen bonding interaction was borrowed in groups to surface sediment particle adsorption. In addition, PAM flocculant has long molecular chain, its length is the chain, but the 100A °, big width only 1A ° magnitude of long chain in the water surface, with huge adsorption of its flocculation effect is good, still can use long chain Bridges between particles in flocculation, big particles, accelerate flocculating sedimentation.
Main purpose:
1, used for sludge dewatering, 2, used for sewage and organic wastewater treatment, Three, use of water of river water plant water treatment flocculant. Usage, the effect is good, the cost is low. Especially, and the inorganic flocculant with better use. It will be along the Yangtze river, the Yellow River basin and the other the waterworks flocculent efficiency.
Non ionic polyacrylamide
This company is non ionic polyacrylamide with acrylamide homopolymerization and into. High purity, good performance, high molecular weight dissolved.
Name
MolecularWeight(ten thousand)
Ion
(%)
Solid Content(%)
remnant
list %
hydrolysis
Dissolve
Time
(min)
CPAM
------ ----
10-50
≥90
≤0.05
20-25
≤40
APAM
600-2000
--- --
≥90
≤0.05
20-30
≤60
PAM--Cationic Polyacrylamide powder for water treatment
1.Used in industrial solid-liquid separation process
2.Water treatment PAM
3.flocculant
1.Cationic Polyacrylamide XDLY-8050
2.ISO9001&14001
3.Export and Import Right.
4.MSDS & SGS Inspecti,
The main applications include erban sewage treatment / paper making / food processing / petrochemical / metallurgical / mineral dressing/dyeing / sugarmaking and all kinds of industrial wastewater treament.
The antiswell agent / thickener for oilfied acidization etc.
2.Water treatment PAM
3.flocculant
1.Cationic Polyacrylamide XDLY-8050
2.ISO9001&14001
3.Export and Import Right.
4.MSDS & SGS Inspecti,
The main applications include erban sewage treatment / paper making / food processing / petrochemical / metallurgical / mineral dressing/dyeing / sugarmaking and all kinds of industrial wastewater treament.
The antiswell agent / thickener for oilfied acidization etc.
PAM--Cationic Polyacrylamide powder
1.Used in industrial solid-liquid separation process
2.Water treatment PAM
3.flocculant
1.Cationic Polyacrylamide XDLY-8050
2.ISO9001&14001
3.Export and Import Right.
4.MSDS & SGS Inspecti,
The main applications include erban sewage treatment / paper making / food processing / petrochemical / metallurgical / mineral dressing/dyeing / sugarmaking and all kinds of industrial wastewater treament.
The antiswell agent / thickener for oilfied acidization etc.
2.Water treatment PAM
3.flocculant
1.Cationic Polyacrylamide XDLY-8050
2.ISO9001&14001
3.Export and Import Right.
4.MSDS & SGS Inspecti,
The main applications include erban sewage treatment / paper making / food processing / petrochemical / metallurgical / mineral dressing/dyeing / sugarmaking and all kinds of industrial wastewater treament.
The antiswell agent / thickener for oilfied acidization etc.
PAM/Polyacrylamide
1) Appearance: white granule
2) Molecular weight: 5 - 22 million minimum
3) Granule: 20 - 100 mesh
4) Contact tracy
Polyacrylamide called PAM
, commonly known as flocculants or cohesion agent, sub-cation, anion type, the molecular weight between 400-1800 million, the product appearance is white or slightly yellow powder, soluble in water. In particular, acidic water, acid and organic matter and the red mud suspension turbidity from flocculation sedimentation and separation of the role of liquid mud, use less, water and low cost, flocculant can not be replaced by other products.
Features of
PAM:
1) Appearance: white granule
2) Molecular weight: 5 - 22 million minimum
3) Granule: 20 - 100 mesh
4) Solid content: 88% minimum
5) Hydrolyzing degree: 10 - 20%, 20 - 30% or 30 - 40%
6) Dissolving time: 2 hours maximum (10°C)
7) Insoluble: 0.5% maximum
8) Monomer free: 0.05% maximum
Any questions, contact tracy.
2) Molecular weight: 5 - 22 million minimum
3) Granule: 20 - 100 mesh
4) Contact tracy
Polyacrylamide called PAM
, commonly known as flocculants or cohesion agent, sub-cation, anion type, the molecular weight between 400-1800 million, the product appearance is white or slightly yellow powder, soluble in water. In particular, acidic water, acid and organic matter and the red mud suspension turbidity from flocculation sedimentation and separation of the role of liquid mud, use less, water and low cost, flocculant can not be replaced by other products.
Features of
PAM:
1) Appearance: white granule
2) Molecular weight: 5 - 22 million minimum
3) Granule: 20 - 100 mesh
4) Solid content: 88% minimum
5) Hydrolyzing degree: 10 - 20%, 20 - 30% or 30 - 40%
6) Dissolving time: 2 hours maximum (10°C)
7) Insoluble: 0.5% maximum
8) Monomer free: 0.05% maximum
Any questions, contact tracy.
PAM/polyacrylamide(factory direct )
PAM/polyacrylamide(factory direct )
1.used for paper /oil/textile/water treatment industry
2.big discount
3.free sample
PAM/polyacrylamide(factory direct )
Polyacrylamide is one of the best flocculant used in oil drilling, water treatment, mineral processing, paper industry.
Usage: Polyacrylamide is one of the best flocculant used in oil drilling, water treatment, mineral processing, paper industry.
Polyacrylamide, one of the best flocculant, is a water soluble high-molecual polymer with a wide scope of usage. Our Polyacrylamide includes Anionic Polyacrylamide, Cationic Polyacrylamide and Nonionic Polyacrylamide. It can be used as displacement agent for EOR(enhance oil recovery), flocculant for water treatment, dehydration agent for sewage sludge.
Specification:
Cationic CPF
Analysis of the project
500 min
600 min
700 min
900 min
Ion degrees
25--45
45--55
55--60
65--75
Solid content
90+/-2%
90+/-2%
90+/-2%
90+/-2%
Hydrolysis degree
20--25%
20--25%
20--25%
20--25%
0.3% aqueous solution ciscosity MPA.S
400-700
400-800
400-1600
400-2030
Residual monomers
0.02 max
0.02 max
0.02 max
0.02 max
Dissolution time
2 h max
2 h max
2 h max
2 h max
Anionic PAM
Analysis of the project
800-1000
1000-12000
1300-1500
1600-2000
Dissolution time
2 h max
2 h max
2 h max
2 h max
Solid content
88+/-2%
90+/-2%
90+/-2%
90+/-2%
Hydrolysis degree
20--30%
20--25%
20--25%
20--25%
Residual monomers
0.05 max
0.02 max
0.02 max
0.02 max
Package:
25KG/PPP BAG, loading in 20mt/20' fcl
Payment terms: L/C at sight or 50%T/T in advance and 50% balance against the copy of origin B/L in three working days
We are also capable of producing products according to buyers' specificatios. If you are interested in our products, please feel free to contact us and we will give you our lowest quotations. Waiting for cooperating with you
1.used for paper /oil/textile/water treatment industry
2.big discount
3.free sample
PAM/polyacrylamide(factory direct )
Polyacrylamide is one of the best flocculant used in oil drilling, water treatment, mineral processing, paper industry.
Usage: Polyacrylamide is one of the best flocculant used in oil drilling, water treatment, mineral processing, paper industry.
Polyacrylamide, one of the best flocculant, is a water soluble high-molecual polymer with a wide scope of usage. Our Polyacrylamide includes Anionic Polyacrylamide, Cationic Polyacrylamide and Nonionic Polyacrylamide. It can be used as displacement agent for EOR(enhance oil recovery), flocculant for water treatment, dehydration agent for sewage sludge.
Specification:
Cationic CPF
Analysis of the project
500 min
600 min
700 min
900 min
Ion degrees
25--45
45--55
55--60
65--75
Solid content
90+/-2%
90+/-2%
90+/-2%
90+/-2%
Hydrolysis degree
20--25%
20--25%
20--25%
20--25%
0.3% aqueous solution ciscosity MPA.S
400-700
400-800
400-1600
400-2030
Residual monomers
0.02 max
0.02 max
0.02 max
0.02 max
Dissolution time
2 h max
2 h max
2 h max
2 h max
Anionic PAM
Analysis of the project
800-1000
1000-12000
1300-1500
1600-2000
Dissolution time
2 h max
2 h max
2 h max
2 h max
Solid content
88+/-2%
90+/-2%
90+/-2%
90+/-2%
Hydrolysis degree
20--30%
20--25%
20--25%
20--25%
Residual monomers
0.05 max
0.02 max
0.02 max
0.02 max
Package:
25KG/PPP BAG, loading in 20mt/20' fcl
Payment terms: L/C at sight or 50%T/T in advance and 50% balance against the copy of origin B/L in three working days
We are also capable of producing products according to buyers' specificatios. If you are interested in our products, please feel free to contact us and we will give you our lowest quotations. Waiting for cooperating with you
ALGAECIDE 10
Broad-Spectrum non foaming algaecide
Use for swimming pools & cooling water systems
CAS NO. 25988-97-0
ALGAECIDE 10
IDENTIFICATION
N,N-Dimethyl-2-hydroxypropylammonium chloride polymer
Poly(2-hydroxypropyl dimethyl ammonium chloride)
M.F. (C
5
H
12
ClNO)n
CAS NO. 25988-97-0
SPECIFICATION
APPEARANCE Colorless to Light yellow clear liquid
CONCENTRATION % 10 Min
DENSITY(20
o
C) g/cm
3
1.015 1.035
PH 6.0 8.0
APPLICATION
Cationic polymeric non foaming biocide for use:
Water treatment in industrial cooling water systems
Algaecide for swimming pools, holding ponds, reservoirs / tanks of industrial fresh water systems
USUAL PACKAGE
1L plastic bottle, 12 bottles per carton
4L/ 5L/ 25L plastic bottle, 4 bottles per carton
220Kg net PE drum, 4 drums on one pallet
Or according to customers requirements
Use for swimming pools & cooling water systems
CAS NO. 25988-97-0
ALGAECIDE 10
IDENTIFICATION
N,N-Dimethyl-2-hydroxypropylammonium chloride polymer
Poly(2-hydroxypropyl dimethyl ammonium chloride)
M.F. (C
5
H
12
ClNO)n
CAS NO. 25988-97-0
SPECIFICATION
APPEARANCE Colorless to Light yellow clear liquid
CONCENTRATION % 10 Min
DENSITY(20
o
C) g/cm
3
1.015 1.035
PH 6.0 8.0
APPLICATION
Cationic polymeric non foaming biocide for use:
Water treatment in industrial cooling water systems
Algaecide for swimming pools, holding ponds, reservoirs / tanks of industrial fresh water systems
USUAL PACKAGE
1L plastic bottle, 12 bottles per carton
4L/ 5L/ 25L plastic bottle, 4 bottles per carton
220Kg net PE drum, 4 drums on one pallet
Or according to customers requirements
PAPE
PAPE :as scale inhibitor for oilfield (recommended as alternatives of Nalco Visco 953) and industrial cool water system.
Polyhydric alcohol phosphate ester
(PAPE)
Structural Formula:
Specification:
items
index
Appearance
Colorless or light yellow transparent liquid
Solid content %
50.0 min
Total phosphoric acidPO
4
3-
%
30.0 min
Organophosphonic acidPO
4
3-
%
15 min
pH1 solution
2.0-3.0
APPLICATIONS:
PAPE
can be used as scale inhibitor for oilfield (recommended as alternatives of Nalco Visco 953) and industrial cool water system.
Packing:
Normally In 250kg net Plastic Drum, IBC drum can also be used as required. Storage for ten months in room shady and dry place.
Polyhydric alcohol phosphate ester
(PAPE)
Structural Formula:
Specification:
items
index
Appearance
Colorless or light yellow transparent liquid
Solid content %
50.0 min
Total phosphoric acidPO
4
3-
%
30.0 min
Organophosphonic acidPO
4
3-
%
15 min
pH1 solution
2.0-3.0
APPLICATIONS:
PAPE
can be used as scale inhibitor for oilfield (recommended as alternatives of Nalco Visco 953) and industrial cool water system.
Packing:
Normally In 250kg net Plastic Drum, IBC drum can also be used as required. Storage for ten months in room shady and dry place.
PASP water treatment chemicals
1.PASP used as scale and corrosion inhibitor.
2.PASP as one of the water treatment chemicals.
Sodium of Polyaspartic Acid (PASP) water treatment chemicals
CAS No. 181828-06-8,35608-40-6
Molecular weight: 1000-5000
Structural Formula:
Specification:
Items
index
Appearance
Amber transparent liquid
Solid content %
40.0 min
Density (20)g/cm
3
1.2 min
pH(1% water solution)
9.0-11.0
Applications:
PASP
can be used as scale and corrosion inhibitor in industrial circulating cool water system, boiler water, reverse osmosis, oilfield water and desalination plant.
PASP
can be used in agricultural as nutrient absorption intensifier to improve the production of vegetable, melon and fruit, and flowers. When used together with pesticide, its effects will be improved.
Packing:
Normally In 200 - 250kg net plastic drum, IBC's can also be used as required.
2.PASP as one of the water treatment chemicals.
Sodium of Polyaspartic Acid (PASP) water treatment chemicals
CAS No. 181828-06-8,35608-40-6
Molecular weight: 1000-5000
Structural Formula:
Specification:
Items
index
Appearance
Amber transparent liquid
Solid content %
40.0 min
Density (20)g/cm
3
1.2 min
pH(1% water solution)
9.0-11.0
Applications:
PASP
can be used as scale and corrosion inhibitor in industrial circulating cool water system, boiler water, reverse osmosis, oilfield water and desalination plant.
PASP
can be used in agricultural as nutrient absorption intensifier to improve the production of vegetable, melon and fruit, and flowers. When used together with pesticide, its effects will be improved.
Packing:
Normally In 200 - 250kg net plastic drum, IBC's can also be used as required.
PASP
PASP:as scale and corrosion inhibitor
PASP:used in agricultural as nutrient absorption intensifier to improve the production .
Sodium of Polyaspartic Acid (PASP)
CAS No. 181828-06-8,
35608-40-6
Molecular weight: 1000-5000
Structural Formula:
Specification:
Items
index
Appearance
Amber transparent liquid
Solid content %
40.0 min
Density g/cm
3
1.2 min
pH(1% water solution)
9.0-11.0
APPLICATIONS:
PASP can be used as scale and corrosion inhibitor in industrial circulating cool water system, boiler water, reverse osmosis, oilfield water and desalination plant.
PASP can be used in agricultural as nutrient absorption intensifier to improve the production of vegetable, melon and fruit, and flowers. When used together with pesticide, its effects will be improved.
Packing:
Normally In 200 - 250kg net Plastic Drum, IBC's can also be used as required.
PASP:used in agricultural as nutrient absorption intensifier to improve the production .
Sodium of Polyaspartic Acid (PASP)
CAS No. 181828-06-8,
35608-40-6
Molecular weight: 1000-5000
Structural Formula:
Specification:
Items
index
Appearance
Amber transparent liquid
Solid content %
40.0 min
Density g/cm
3
1.2 min
pH(1% water solution)
9.0-11.0
APPLICATIONS:
PASP can be used as scale and corrosion inhibitor in industrial circulating cool water system, boiler water, reverse osmosis, oilfield water and desalination plant.
PASP can be used in agricultural as nutrient absorption intensifier to improve the production of vegetable, melon and fruit, and flowers. When used together with pesticide, its effects will be improved.
Packing:
Normally In 200 - 250kg net Plastic Drum, IBC's can also be used as required.
PBTC (2-Phosphonobutane-1, 2, 4-Tricarboxylic Acid)
PBTC: Appearance: Cloroless liquid,
Active content: 49% - 51%
Iron: 10 ppm max
Ph (1% ): 2 max
Density: 1.27 min
PBTC
CAS No. 37971-36-1
Molecular Formula: C
7
H
11
O
9
P Molecular weight: 270.13
Properties:
PBTCA or PBTC has low content of phosphoric,
has structural features of both phosphoric acid and carboxylic acid group,
which enable its excellent scale and corrosion inhibition properties.
Its antiscale property under high temperature is far better
than that of organophosphines.
It can improve zinc salt solubility,
has good chlorine oxidation tolerance and good composite synergy.
Specification:
TEST ITEMS
STANDARD
RESULT
Appearance
Colorless or
Light yellow transparent liquid.
Clear colourless liquid
Active content
50.0 min.
50.06
Organophosphate content
17%-19%
17.6
Phosphorous Acid(as PO
3
3-
);%
0.5 Max.
0.12
Phosphoric Acid(as PO
4
3-
);%
0.2 Max.
0.06
Density(20°C);g/cm
3
1.27 Min.
1.29
PH
Value(1% water solution)
1.5-2.0
1.9
Chloride(Cl);ppm
10 Max.
3.0
Chelation
330mgCa/g Ph11
364
Iron(Fe);ppm
10 Max.
3.0
Usage:
PTBCA is a high efficient agent as scale and corrosion inhibitor.
It is the excellent stabilizer for zinc salt.
It is widely used in circulating cool water system and oilfield refill water system
as scale and corrosion inhibitor,
suitable to composite with zinc salt and copolymer.
It can be used in situations of high temperature,
high hardness, high alkali and high concentration index. In lavation fields,
it is used as chelating agent and metal detergent.
PBTCA is usually used together with zinc salt, copolymer, organophosphine,
imidazole and other Water Treatment Chemicals.
When used alone, the dosage of 5-15mg/L is preferred.
Package and Storage:
Normally In 250kg net Plastic Drum, IBC drum, ISo-tank can also be used as required.
Storage for one year in room shady and dry place.
Safety Protection:
Acidity, Avoid contact with eye and skin, once contacted, flush with water.
Active content: 49% - 51%
Iron: 10 ppm max
Ph (1% ): 2 max
Density: 1.27 min
PBTC
CAS No. 37971-36-1
Molecular Formula: C
7
H
11
O
9
P Molecular weight: 270.13
Properties:
PBTCA or PBTC has low content of phosphoric,
has structural features of both phosphoric acid and carboxylic acid group,
which enable its excellent scale and corrosion inhibition properties.
Its antiscale property under high temperature is far better
than that of organophosphines.
It can improve zinc salt solubility,
has good chlorine oxidation tolerance and good composite synergy.
Specification:
TEST ITEMS
STANDARD
RESULT
Appearance
Colorless or
Light yellow transparent liquid.
Clear colourless liquid
Active content
50.0 min.
50.06
Organophosphate content
17%-19%
17.6
Phosphorous Acid(as PO
3
3-
);%
0.5 Max.
0.12
Phosphoric Acid(as PO
4
3-
);%
0.2 Max.
0.06
Density(20°C);g/cm
3
1.27 Min.
1.29
PH
Value(1% water solution)
1.5-2.0
1.9
Chloride(Cl);ppm
10 Max.
3.0
Chelation
330mgCa/g Ph11
364
Iron(Fe);ppm
10 Max.
3.0
Usage:
PTBCA is a high efficient agent as scale and corrosion inhibitor.
It is the excellent stabilizer for zinc salt.
It is widely used in circulating cool water system and oilfield refill water system
as scale and corrosion inhibitor,
suitable to composite with zinc salt and copolymer.
It can be used in situations of high temperature,
high hardness, high alkali and high concentration index. In lavation fields,
it is used as chelating agent and metal detergent.
PBTCA is usually used together with zinc salt, copolymer, organophosphine,
imidazole and other Water Treatment Chemicals.
When used alone, the dosage of 5-15mg/L is preferred.
Package and Storage:
Normally In 250kg net Plastic Drum, IBC drum, ISo-tank can also be used as required.
Storage for one year in room shady and dry place.
Safety Protection:
Acidity, Avoid contact with eye and skin, once contacted, flush with water.
PBTCA water chemicals
1.PBTCA as scale & corrosion inhibitor .
2.PBTCA used in cooling, boiler & field water treatment .
2-Phosphonobutane-1,2,4-Tricarboxylic acid
PBTCA (water chemicals)
Abbreviation:
PBTCA
CAS No. 37971-36-1
Molecular weight:270
Structural Formula:
Specification:
items
index
Appearance
Colorless or light yellow transparent liquid
Active acid %
50.0 min
Phosphorous acid(as PO
3
3-
)%
0.8 max
Phosphorous acid(as PO
4
3-
)%
0.5 max
Density (20) g/cm
3
1.27 min
pH(1% solution)
1.5~2.0
APPLICATIONS:
PBTCA
is mainly used as Scale & Corrosion Inhibitor in Cooling, Boiler & Field Water Treatment .
Packing:
Normally In 250kg net Plastic Drum, IBC's can also be used as required.
2.PBTCA used in cooling, boiler & field water treatment .
2-Phosphonobutane-1,2,4-Tricarboxylic acid
PBTCA (water chemicals)
Abbreviation:
PBTCA
CAS No. 37971-36-1
Molecular weight:270
Structural Formula:
Specification:
items
index
Appearance
Colorless or light yellow transparent liquid
Active acid %
50.0 min
Phosphorous acid(as PO
3
3-
)%
0.8 max
Phosphorous acid(as PO
4
3-
)%
0.5 max
Density (20) g/cm
3
1.27 min
pH(1% solution)
1.5~2.0
APPLICATIONS:
PBTCA
is mainly used as Scale & Corrosion Inhibitor in Cooling, Boiler & Field Water Treatment .
Packing:
Normally In 250kg net Plastic Drum, IBC's can also be used as required.
AMINO,TRIS(METHYLENE PHOSPHONIC ACID) (ATMP)
AMINO,TRIS(METHYLENE PHOSPHONIC ACID) (ATMP)Content (ATMP%) 50
Phosphorous acid(%) 3.0
AMINO,TRIS(METHYLENE PHOSPHONIC ACID) (ATMP)
It is a transparent sticky liquid in light yellow or colorless with density 1.33 g/cm3.. Antiscaling agent for circulation cooling water system and boiler water, also for the oil pipeline with high-hardness, high-minization and worse-quality water. Less than 10mg/l each time as antiscaling agent; about 100mg/l each time as slow corrodent; and less than 5mg/l when mixing polycarboxylic acid water treatment agents.
Molecular Formula:
C
3
H
3
NO
9
P
3
Molecular Weight:299.05038
CAS RN: [6419-19-8]
Specifications:
Items
Target
Content (ATMP%) ≥
50
Phosphorous acid(%)≤
3.0
Phosphoric acid(%)≤
0.8
Chloride(%) ≤
2.0
PH(1%aqueous solution) ≤
2.0 ± 0.5
Density(20°C)g/cm3 ≥
1.28
Colour
Transparent sticky liquid in light yellow or colorless
Production: 300 tons per year
Package: Plastic barrel, net weight 25kg(or net weight 250kg).
Phosphorous acid(%) 3.0
AMINO,TRIS(METHYLENE PHOSPHONIC ACID) (ATMP)
It is a transparent sticky liquid in light yellow or colorless with density 1.33 g/cm3.. Antiscaling agent for circulation cooling water system and boiler water, also for the oil pipeline with high-hardness, high-minization and worse-quality water. Less than 10mg/l each time as antiscaling agent; about 100mg/l each time as slow corrodent; and less than 5mg/l when mixing polycarboxylic acid water treatment agents.
Molecular Formula:
C
3
H
3
NO
9
P
3
Molecular Weight:299.05038
CAS RN: [6419-19-8]
Specifications:
Items
Target
Content (ATMP%) ≥
50
Phosphorous acid(%)≤
3.0
Phosphoric acid(%)≤
0.8
Chloride(%) ≤
2.0
PH(1%aqueous solution) ≤
2.0 ± 0.5
Density(20°C)g/cm3 ≥
1.28
Colour
Transparent sticky liquid in light yellow or colorless
Production: 300 tons per year
Package: Plastic barrel, net weight 25kg(or net weight 250kg).
PBTCA water treatment system
1.PBTCA as scale & corrosion inhibitor .
2.PBTCA as one of the water treatment system.
2-Phosphonobutane-1,2,4-Tricarboxylic acid
PBTCA water treatment system
Abbreviation:PBTCA
CAS No. 37971-36-1
Molecular weight:270
Structural Formula:
Specification:
items
index
Appearance
Colorless or light yellow transparent liquid
Active acid %
50.0 min
Phosphorous acid(as PO
3
3-
)%
0.8 max
Phosphorous acid(as PO
4
3-
)%
0.5 max
Density (20) g/cm
3
1.27 min
pH(1% solution)
1.5~2.0
Applications:
PBTCA
mainly used as scale & corrosion inhibitor in cooling, boiler & field water treatment .
Packing:
Normally in 250kg net plastic drum, IBC's can also be used as required.
2.PBTCA as one of the water treatment system.
2-Phosphonobutane-1,2,4-Tricarboxylic acid
PBTCA water treatment system
Abbreviation:PBTCA
CAS No. 37971-36-1
Molecular weight:270
Structural Formula:
Specification:
items
index
Appearance
Colorless or light yellow transparent liquid
Active acid %
50.0 min
Phosphorous acid(as PO
3
3-
)%
0.8 max
Phosphorous acid(as PO
4
3-
)%
0.5 max
Density (20) g/cm
3
1.27 min
pH(1% solution)
1.5~2.0
Applications:
PBTCA
mainly used as scale & corrosion inhibitor in cooling, boiler & field water treatment .
Packing:
Normally in 250kg net plastic drum, IBC's can also be used as required.
PBTCA chemical products
1.PBTCA as scale & corrosion inhibitor .
2.PBTCA as one of the chemical products.
3.PBTCA used in cooling, boiler & field .
2-Phosphonobutane-1,2,4-Tricarboxylic acid
PBTCA (chemical products)
Abbreviation:PBTCA
CAS No. 37971-36-1
Molecular weight:270
Structural Formula:
Specification:
items
index
Appearance
Colorless or light yellow transparent liquid
Active acid %
50.0 min
Phosphorous acid(as PO
3
3-
)%
0.8 max
Phosphorous acid(as PO
4
3-
)%
0.5 max
Density (20) g/cm
3
1.27 min
pH(1% solution)
1.5~2.0
Applications:
PBTCA
mainly used as scale & corrosion inhibitor in cooling, boiler & field water treatment .
Packing:
Normally In 250kg net plastic drum, IBC's can also be used as required.
2.PBTCA as one of the chemical products.
3.PBTCA used in cooling, boiler & field .
2-Phosphonobutane-1,2,4-Tricarboxylic acid
PBTCA (chemical products)
Abbreviation:PBTCA
CAS No. 37971-36-1
Molecular weight:270
Structural Formula:
Specification:
items
index
Appearance
Colorless or light yellow transparent liquid
Active acid %
50.0 min
Phosphorous acid(as PO
3
3-
)%
0.8 max
Phosphorous acid(as PO
4
3-
)%
0.5 max
Density (20) g/cm
3
1.27 min
pH(1% solution)
1.5~2.0
Applications:
PBTCA
mainly used as scale & corrosion inhibitor in cooling, boiler & field water treatment .
Packing:
Normally In 250kg net plastic drum, IBC's can also be used as required.
PBTCA chemicals
PBTCA is mainly used as Scale & Corrosion Inhibitor in Cooling, Boiler & Field Water Treatment.
2-Phosphonobutane-1,2,4-Tricarboxylic acid(
PBTCA)
CAS No. 37971-36-1
Abbreviation:PBTCA
Molecular weight:270
Structural Formula:
Specification:
items
index
Appearance
Colorless or light yellow transparent liquid
Active acid %
50.0 min
Phosphorous acid(as PO
3
3-
)%
0.8 max
Phosphorous acid(as PO
4
3-
)%
0.5 max
Density (20) g/cm
3
1.27 min
pH(1% solution)
1.5~2.0
APPLICATIONS:
It is mainly used as Scale & Corrosion Inhibitor in Cooling, Boiler & Field Water Treatment .
Packing:
Normally In 250kg net Plastic Drum, IBC's can also be used as required.
2-Phosphonobutane-1,2,4-Tricarboxylic acid(
PBTCA)
CAS No. 37971-36-1
Abbreviation:PBTCA
Molecular weight:270
Structural Formula:
Specification:
items
index
Appearance
Colorless or light yellow transparent liquid
Active acid %
50.0 min
Phosphorous acid(as PO
3
3-
)%
0.8 max
Phosphorous acid(as PO
4
3-
)%
0.5 max
Density (20) g/cm
3
1.27 min
pH(1% solution)
1.5~2.0
APPLICATIONS:
It is mainly used as Scale & Corrosion Inhibitor in Cooling, Boiler & Field Water Treatment .
Packing:
Normally In 250kg net Plastic Drum, IBC's can also be used as required.
PBTCA chemicals
1.PBTCA as scale&corrosion inhibitor .
2.PBTCA as one of the chemicals.
3.PBTCA used in cooling, boiler & field water .
2-Phosphonobutane-1,2,4-Tricarboxylic acid
PBTCA chemicals
Abbreviation:PBTCA
CAS No. 37971-36-1
Molecular weight:270
Structural Formula:
Specification:
items
index
Appearance
Colorless or light yellow transparent liquid
Active acid %
50.0 min
Phosphorous acid(as PO
3
3-
)%
0.8 max
Phosphorous acid(as PO
4
3-
)%
0.5 max
Density (20) g/cm
3
1.27 min
pH(1% solution)
1.5~2.0
Applications:
PBTCA
is mainly used as scale & corrosion inhibitor in cooling, boiler & field water treatment .
Packing:
Normally in 250kg net plastic drum, IBC's can also be used as required.
2.PBTCA as one of the chemicals.
3.PBTCA used in cooling, boiler & field water .
2-Phosphonobutane-1,2,4-Tricarboxylic acid
PBTCA chemicals
Abbreviation:PBTCA
CAS No. 37971-36-1
Molecular weight:270
Structural Formula:
Specification:
items
index
Appearance
Colorless or light yellow transparent liquid
Active acid %
50.0 min
Phosphorous acid(as PO
3
3-
)%
0.8 max
Phosphorous acid(as PO
4
3-
)%
0.5 max
Density (20) g/cm
3
1.27 min
pH(1% solution)
1.5~2.0
Applications:
PBTCA
is mainly used as scale & corrosion inhibitor in cooling, boiler & field water treatment .
Packing:
Normally in 250kg net plastic drum, IBC's can also be used as required.
PBTCA water chemicals
1.PBTCA used as scale&corrosion inhibitor.
2.PBTCA as one of the water chemicals.
3.PBTCA used in cooling,boiler&field water.
2-Phosphonobutane-1,2,4-Tricarboxylic acid
PBTCA water chemicals
Abbreviation:PBTCA
CAS No. 37971-36-1
Molecular weight:270
Structural Formula:
Specification:
items
index
Appearance
Colorless or light yellow transparent liquid
Active acid %
50.0 min
Phosphorous acid(as PO
3
3-
)%
0.8 max
Phosphorous acid(as PO
4
3-
)%
0.5 max
Density (20) g/cm
3
1.27 min
pH(1% solution)
1.5~2.0
Applications:
PBTCA is mainly used as scale & corrosion inhibitor in cooling, boiler & field water treatment .
Packing:
Normally In 250kg net plastic drum, IBC's can also be used as required.
2.PBTCA as one of the water chemicals.
3.PBTCA used in cooling,boiler&field water.
2-Phosphonobutane-1,2,4-Tricarboxylic acid
PBTCA water chemicals
Abbreviation:PBTCA
CAS No. 37971-36-1
Molecular weight:270
Structural Formula:
Specification:
items
index
Appearance
Colorless or light yellow transparent liquid
Active acid %
50.0 min
Phosphorous acid(as PO
3
3-
)%
0.8 max
Phosphorous acid(as PO
4
3-
)%
0.5 max
Density (20) g/cm
3
1.27 min
pH(1% solution)
1.5~2.0
Applications:
PBTCA is mainly used as scale & corrosion inhibitor in cooling, boiler & field water treatment .
Packing:
Normally In 250kg net plastic drum, IBC's can also be used as required.
PBTCA water chemicals
1.PBTCA used as scale&corrosion inhibitor.
2.PBTCA as one of the water chemicals.
3.PBTCA used in cooling,boiler&field water.
2-Phosphonobutane-1,2,4-Tricarboxylic acid
PBTCA water chemicals
Abbreviation:PBTCA
CAS No. 37971-36-1
Molecular weight:270
Structural Formula:
Specification:
items
index
Appearance
Colorless or light yellow transparent liquid
Active acid %
50.0 min
Phosphorous acid(as PO
3
3-
)%
0.8 max
Phosphorous acid(as PO
4
3-
)%
0.5 max
Density (20) g/cm
3
1.27 min
pH(1% solution)
1.5~2.0
Applications:
PBTCA is mainly used as scale & corrosion inhibitor in cooling, boiler & field water treatment .
Packing:
Normally in 250kg net plastic drum, IBC's can also be used as required.
2.PBTCA as one of the water chemicals.
3.PBTCA used in cooling,boiler&field water.
2-Phosphonobutane-1,2,4-Tricarboxylic acid
PBTCA water chemicals
Abbreviation:PBTCA
CAS No. 37971-36-1
Molecular weight:270
Structural Formula:
Specification:
items
index
Appearance
Colorless or light yellow transparent liquid
Active acid %
50.0 min
Phosphorous acid(as PO
3
3-
)%
0.8 max
Phosphorous acid(as PO
4
3-
)%
0.5 max
Density (20) g/cm
3
1.27 min
pH(1% solution)
1.5~2.0
Applications:
PBTCA is mainly used as scale & corrosion inhibitor in cooling, boiler & field water treatment .
Packing:
Normally in 250kg net plastic drum, IBC's can also be used as required.