DEFOAMER

DEFOAMER
WHITE EMULSION
BWF 160 DEFOAMER
CHEMICAL TYPE:
AN EMULSION OF DIMETHYL POLYSILOXANE (Silicon Type)
IONIC CHARGE: NON IONIC/ANIONIC
PHYSICAL SPECIFICATION
1. APPEARANCE
WHITE EMULSION (Water base)
2. WATER MISCIBILITY:
FORMS A GOOD DISPERSION
3. FLUIDITY:
VISCOSITY NOT GREATER THAN 1000 cPs @
20oC DIN 53019 100rpm
4. CLEANLINESS
NO PARTICLES AFTER SCREENING THROUGH
A 400 MICRON APERTURE SCREEN.
5. EMULSION PARTICLE SIZE
90% LESS THAN 100 MICRONS
6. WATER CONTENT
NOT GREATER THAN 85%
PURPOSE:
BWF160 is an foam control agent for
use in a wide range of aqueous industrial systems, particularly in textile processing and other surfactant systems.
APPLICATION:
Normally used as delivered. Where very small
quantities are to be added, it can be pre-diluted
with soft or distilled water. The level of addition
recommended is normally between 10 - 100 ppm
and should be optimized by trial.
STORAGE:
Store in closed containers. Avoid extremes of
temperature.
STABILITY:
6 months minimum
PACKAGING
200 litre or 1000 litre plastic containers