Corrosion Inhibitor Intermediate

suitable for antisepsis of waste water reinjection equipment in oil recovery plant.
Corrosion Inhibitor Intermediate

1. Introduction
Normally, imidazoline is the corrosion ingredient of corrosion inhibitor, while we use bis-imidazoline as corrosion ingredients. There are two pairs of imidazoline molecule pentacyclic group and two adsorption groups in bis-inidazoline, so its adsorption is higher than the imidazoline.
2. Technical data sheet
Items
Index
Appearance
Yellow to red-brown liquid
PH value
9.0-11.0
Active ingredient(%)
≥55
Solubility
Miscible with water
Density(g/cm3)
1.00-1.15
3. Method and Use
a. Mix it with water according to 3:7 ratios,you can get corrosion inhibitor products.
b. Suitable for antisepsis of waste water reinjection equipment in oil recovery plant and atmospheric pressure, catalytic equipment in refinery.
c. Reference dosage 30-50ppm. Its inhibition rate is higher than 85%, corrosion rate is lower than 0.05mm / a. Add 30ppm in refinery, the iron ions can be reduced to below 2ppm.
4. Packing and storage
a. Net weight 200KG / drum.
b. Valid for one year.