Monday, August 1, 2011

Shengquan supply perfect quality APAM

1.Flocculating and thickening agent
2.PAM is easy to dissolve
3.Best Price and first quality
4.Large quantity discount
1.Overview
Polycrylamide is code named PAM, it is produced by the ions monomer and acrylamide with different
copolymerization ratio, it is a good watersoluble white particles of polymer, because of its
molecular chain is respectively with a number if positive, negative, neutral charge and genes of
strong adsorption, therefore neutralize the electric charge in the surface of suspended colloidal
particles in the processed water, then destroy its stability, colloidal particles of destabilization
mutually absorb in the bridging effect if polymer active genes, then form of large floc and quickly
sink, thus play the ultimate goal of separating solidliquid. Therefore gain the best effect using with
the inorganic coagulant.
2.The using methods and precautions
1>.It is suitable to make the concentration of 0.2% aqueous solution to use neutral water without salt.
2>.For the product applies to relatively wide rang of water PH value, the general dosage is of 0.1-
10ppm(0.1-10mg/L)
3>.Fully dissolved, Firstly, after the water being mixed up, the powder is required to be added slowly
and even to prevent massive flocculation and fish-eye phenomenon that will cause pipes and pumps to be blocked.
4>.Generally speaking, the 200rev-min of stirring speed is appropriate, the stirring time is no less than 60 minutes, increasing temperatur
e 20 30 degrees Celsius can accelerate the dissolution. The maximum temperature of liquid should
be less than 60 degrees.
5>.Determine the best dosage. Determine the optimal dosage by the experiment before using. If the
dosage is too low, it dose not work, the amount is too high, but counterproductive, when it exceed a
certain concentration, PAM not only do not flocculation, but disperse the using stability.
6>.The product should be stored in a cool, dry place to prevent moisture.
7>.The workable should always be washed with water to keep clean. Because of its viscosity, when
PAM which is scattered in the ground and touch water the floor will be smooth, should prevent acciden
ts caused by operator slipped.
8>.The product is lined with plastic bag, outer package is plastic laminating woven bag, the specificati
on is of 25kg per bag.

No comments:

Post a Comment