Alumina Ball
a).white globular porosity particles with symmetrical particle size
b).non-poisonous, no smell
c).strong ability
Alumina Ball
(1). The products are white globular porosity particles with symmetrical particle size.
(2). They will remain original shape when absorbing water and they are non-poisonous, no smell, odorless and insoluble to water and organic solvents.
(3). In certain operating conditions, its dry-depth reaches below 70 degrees of dew-point temperature.
(4). applications:
a. It can be used as deacidificated regenerant of transformer oil and gas drying of oxygen industry, textile Industry and electronic industry, and air drying of automatic instrument and meter.
b. It is also used as drying agent and cleaning agent in fertilizer and petrochemical industry (dew point reaches-40 degrees) and dew point reaches -55 degrees of pressure swing adsorption of space division industry.
In one word, it is an efficient drying agent of deep drying in trace water.
Specific indexes as follows:
Serial number
Index projects
Index requirement
1
Appearance
White
2
Particle size (mm)
1.5-2.4 3-5 5-8
3
Intensity (N/ , average value)
Min150
4
Bulk specific weight (g/cm
3
)
0.7-0.8
5
Pore volume (cm
3
/g)
min0.38
6
Wear rate (%)
max0.6
7
Specific surface area (m
2
/g)
min300
8
Sodium oxide content (Na
2
O, %)
max1.0
9
Water absorption rate (%)
min50
10
Alumina content (AL
2
O
3
)
min92
11
Static adsorption capacity % (RH=60)
min16.8
Saturday, August 6, 2011
Refine Processing Zeolite Widely Used
Zeolite
1.ISO9001
2.High exchange capacity
3.Strong adsorption
4.Lower cost&better service
Zeolite
Instruction:
prevent molecular sieve from exposing directly to the air.
Waring:
molecular sieve adsorption activity is an exothermic reaction,any contact to human body is dangerous.
1. Natural clinoptilolite filter Natural zeolite
is aluminosilicate, the appearance is white or bolarious.
It belongs to weakly acidic cationic exchange agent. After add the activated component, make it has better ion exchange or adsorption ability, and the adsorption energy also increase accordingly.
This kind of filter is mainly used for small boiler water conditioning, removing the calcium,magnesium ions in the water, in order to reduce the boiler scale formation and less the corrosion, at the same prolong the service life of the boiler.
In the waste water treatment, it can wipe off phosphorus, lead and hexavalent chromium. Invalided zeolite can be also used concentrated brine counter-current.
Natural clinoptilolite filter's chemical and physical index:
Proportion(g/cm3)
2.2-2.6
Silt Content%
≤1.0
Volumeweight(g/cm3)
1.6
Moisture%
≤1.5
Ware Rate%
<1.0
Sodium ion Exchange Ability
≥800
2. Activation zeolite filter Activation zeolite filter
is made by the natural zeolite after special activation.
The adsorption ability and the ion exchange capacity is better than the natural zeolite.
It is not only dislodge turbidity, chroma and peculiar smell, but also can adsorb harmful metals in the water(chrome, cadmium, nickel, zinc, mercury, iron ions) and organic in the water(phenol, phosphate radical ion). This product is conductive to dislodge various micro pollutants and has no harmful substances.
Therefore, activation zeolite filter is the ideal material for industrial water, waste water treatment and tap water filtration.
Performance Analysis:
Density g/cm3
1.8-2.2
Filtering Velocity m/h
4-12
Volumeweight g/cm3
1.4
Wear Rate%
<0.5
Pore Ratio%
≥50
Broken Rate%
<1.0
Specific Surface Area m2/g
500-800
Silt Content%
<1.0
Hydrochloric Acid Solute Rate%
≤0.1
All Exchange Work Capacity mg/g
2.2-2.5
1.ISO9001
2.High exchange capacity
3.Strong adsorption
4.Lower cost&better service
Zeolite
Instruction:
prevent molecular sieve from exposing directly to the air.
Waring:
molecular sieve adsorption activity is an exothermic reaction,any contact to human body is dangerous.
1. Natural clinoptilolite filter Natural zeolite
is aluminosilicate, the appearance is white or bolarious.
It belongs to weakly acidic cationic exchange agent. After add the activated component, make it has better ion exchange or adsorption ability, and the adsorption energy also increase accordingly.
This kind of filter is mainly used for small boiler water conditioning, removing the calcium,magnesium ions in the water, in order to reduce the boiler scale formation and less the corrosion, at the same prolong the service life of the boiler.
In the waste water treatment, it can wipe off phosphorus, lead and hexavalent chromium. Invalided zeolite can be also used concentrated brine counter-current.
Natural clinoptilolite filter's chemical and physical index:
Proportion(g/cm3)
2.2-2.6
Silt Content%
≤1.0
Volumeweight(g/cm3)
1.6
Moisture%
≤1.5
Ware Rate%
<1.0
Sodium ion Exchange Ability
≥800
2. Activation zeolite filter Activation zeolite filter
is made by the natural zeolite after special activation.
The adsorption ability and the ion exchange capacity is better than the natural zeolite.
It is not only dislodge turbidity, chroma and peculiar smell, but also can adsorb harmful metals in the water(chrome, cadmium, nickel, zinc, mercury, iron ions) and organic in the water(phenol, phosphate radical ion). This product is conductive to dislodge various micro pollutants and has no harmful substances.
Therefore, activation zeolite filter is the ideal material for industrial water, waste water treatment and tap water filtration.
Performance Analysis:
Density g/cm3
1.8-2.2
Filtering Velocity m/h
4-12
Volumeweight g/cm3
1.4
Wear Rate%
<0.5
Pore Ratio%
≥50
Broken Rate%
<1.0
Specific Surface Area m2/g
500-800
Silt Content%
<1.0
Hydrochloric Acid Solute Rate%
≤0.1
All Exchange Work Capacity mg/g
2.2-2.5
Acid Dyes Fixing Agent
1.Acid Dyes Fixing Agent
2.High concentrate;low consumption
3.Resistance to chlorine up to 30PPM
4.Increase washing fastness
Acid Dyes Fixing Agent LA-60
Acid Dyes Fixing Agent
High concentrate;low consumption
Resistance to chlorine up to 30PPM
Increase washing fastness
Acidic fixing agent is suitable for wool, polyamide, silk, etc that dyes with anionic dye(acidic dye,metallizeddye).
The washing fastness and perspiration fastness of the treated dyed material have
been greatly improved, so do the colour changing of the fabrics after fixing.
Typical Data
Composition
Sulfonate condensation
Appearance
Dark brown liquid
Ionization character
Anionic
solubility
Soluble in water
PH value
2-3
Stability
Resistant to acid, alkali, electrolytes and hard water
Properties
1. No change on the fabric shade, little effect on feel.
2. Can be dying and fixing at the same time, shorten the process.
3. Increase washing fastness to level 4, wet friction and perspiration have been greatly improved.
4. Another characteristic of the product is that it's good at acid resistance.
5.Resistance to chlorine up to 30PPM, An environmentally friendly non-formaldehyde fixing agent.
Application
The suggested application amount for dipping process is 1-2%
O.W.F of Acid Dyes Fixing Agent for pale shade, and 2-3%
O.W.F for medium shade, 3-4% O.W.F of LA-60
for deep shade,
with liquor ratio 1:15-20 at 80°C for 20 minutes;
Packing & Storage
125KG in one plastic drum; Sealed at room temperature can be stored for 6 months.
Notice
Reactive dyes color fastness not only depends on dyestuff concentration
but also on washing after dyeing. Dyed fabrics must be fully washed (washing, soaping,
then re-washing).
Deep colored textile fabrics should be fixed after soaping at high temperature and washing.
Remarks
All technical information quoted above is based on our experience, but it is only for reference of
using this product and not given with guarantee and obligation. As the different application
conditions of every factory, the user should make a trial before use.
Then confirm the best technics suitable for you.
2.High concentrate;low consumption
3.Resistance to chlorine up to 30PPM
4.Increase washing fastness
Acid Dyes Fixing Agent LA-60
Acid Dyes Fixing Agent
High concentrate;low consumption
Resistance to chlorine up to 30PPM
Increase washing fastness
Acidic fixing agent is suitable for wool, polyamide, silk, etc that dyes with anionic dye(acidic dye,metallizeddye).
The washing fastness and perspiration fastness of the treated dyed material have
been greatly improved, so do the colour changing of the fabrics after fixing.
Typical Data
Composition
Sulfonate condensation
Appearance
Dark brown liquid
Ionization character
Anionic
solubility
Soluble in water
PH value
2-3
Stability
Resistant to acid, alkali, electrolytes and hard water
Properties
1. No change on the fabric shade, little effect on feel.
2. Can be dying and fixing at the same time, shorten the process.
3. Increase washing fastness to level 4, wet friction and perspiration have been greatly improved.
4. Another characteristic of the product is that it's good at acid resistance.
5.Resistance to chlorine up to 30PPM, An environmentally friendly non-formaldehyde fixing agent.
Application
The suggested application amount for dipping process is 1-2%
O.W.F of Acid Dyes Fixing Agent for pale shade, and 2-3%
O.W.F for medium shade, 3-4% O.W.F of LA-60
for deep shade,
with liquor ratio 1:15-20 at 80°C for 20 minutes;
Packing & Storage
125KG in one plastic drum; Sealed at room temperature can be stored for 6 months.
Notice
Reactive dyes color fastness not only depends on dyestuff concentration
but also on washing after dyeing. Dyed fabrics must be fully washed (washing, soaping,
then re-washing).
Deep colored textile fabrics should be fixed after soaping at high temperature and washing.
Remarks
All technical information quoted above is based on our experience, but it is only for reference of
using this product and not given with guarantee and obligation. As the different application
conditions of every factory, the user should make a trial before use.
Then confirm the best technics suitable for you.
Refined Poly Aluminium Chloride PAC 28%
Poly aluminium Chloride PAC 28%
1. Low impurity
2. High molecular weight
3. Superior coagulating effect
Poly aluminium Chloride PAC 28%
Application
Poly Aluminium Chloride(PAC) can be used in the clarification of drinking water, polluted industrial wastewater and industrial sewege.
Usage
1. Solid PAC should be used after being dissolved in water and the dilution ratio is generally 2%-20%( weight percentage )
2. The dosage is generally 1-15g per ton. Meanwhile, the specific dosage should be subject to users' actual experiment considering the specific water quality and turbidity.
Introduction and promise:
Tenorchem can supply PAC/Poly aluminum chloride 60000MT/YEAR,and we own self importing & exporting rights.You may rest assured of top-grade products & best price & most convenient service.
Cautions
1. It cannot be stored together with other chemical reagents.
2. The storage period of solid PAC should be 2 years while being stored in ventilated and dry place. The performance will not change even through being damped.
Key technical indexes:
Item
Polyaluminium Chloride
Liquid Type
Solid Type
Relative Density(20°C)
1.19
PH Value(1%aqueous solution)
3.5-4.5
3.5-4.5
Al2O3 Content
10.0
29
Ferric Oxide Content
1-2
2-3
Basicity %
60-95
60-95
Water Insoluble Content %
<0.3
<0.1
As %
<0.0003
<0.0006
Mn %
≤0.045
≤0.01
Pb %
≤0.001
≤0.003
Hg %
≤0.00002
≤0.00006
SO4 %
3.5-9.6
3.5-10.0
1. Low impurity
2. High molecular weight
3. Superior coagulating effect
Poly aluminium Chloride PAC 28%
Application
Poly Aluminium Chloride(PAC) can be used in the clarification of drinking water, polluted industrial wastewater and industrial sewege.
Usage
1. Solid PAC should be used after being dissolved in water and the dilution ratio is generally 2%-20%( weight percentage )
2. The dosage is generally 1-15g per ton. Meanwhile, the specific dosage should be subject to users' actual experiment considering the specific water quality and turbidity.
Introduction and promise:
Tenorchem can supply PAC/Poly aluminum chloride 60000MT/YEAR,and we own self importing & exporting rights.You may rest assured of top-grade products & best price & most convenient service.
Cautions
1. It cannot be stored together with other chemical reagents.
2. The storage period of solid PAC should be 2 years while being stored in ventilated and dry place. The performance will not change even through being damped.
Key technical indexes:
Item
Polyaluminium Chloride
Liquid Type
Solid Type
Relative Density(20°C)
1.19
PH Value(1%aqueous solution)
3.5-4.5
3.5-4.5
Al2O3 Content
10.0
29
Ferric Oxide Content
1-2
2-3
Basicity %
60-95
60-95
Water Insoluble Content %
<0.3
<0.1
As %
<0.0003
<0.0006
Mn %
≤0.045
≤0.01
Pb %
≤0.001
≤0.003
Hg %
≤0.00002
≤0.00006
SO4 %
3.5-9.6
3.5-10.0
Refined 4A Zeolite Filter Media
Zeolite
1.ISO9001
2.High exchange capacity
3.Strong adsorption
4.Lower cost&better service
Zeolite
Instruction:
prevent molecular sieve from exposing directly to the air.
Waring:
molecular sieve adsorption activity is an exothermic reaction,any contact to human body is dangerous.
1. Natural clinoptilolite filter Natural zeolite
is aluminosilicate, the appearance is white or bolarious.
It belongs to weakly acidic cationic exchange agent. After add the activated component, make it has better ion exchange or adsorption ability, and the adsorption energy also increase accordingly.
This kind of filter is mainly used for small boiler water conditioning, removing the calcium,magnesium ions in the water, in order to reduce the boiler scale formation and less the corrosion, at the same prolong the service life of the boiler.
In the waste water treatment, it can wipe off phosphorus, lead and hexavalent chromium. Invalided zeolite can be also used concentrated brine counter-current.
Natural clinoptilolite filter's chemical and physical index:
Proportion(g/cm3)
2.2-2.6
Silt Content%
≤1.0
Volumeweight(g/cm3)
1.6
Moisture%
≤1.5
Ware Rate%
<1.0
Sodium ion Exchange Ability
≥800
2. Activation zeolite filter Activation zeolite filter
is made by the natural zeolite after special activation.
The adsorption ability and the ion exchange capacity is better than the natural zeolite.
It is not only dislodge turbidity, chroma and peculiar smell, but also can adsorb harmful metals in the water(chrome, cadmium, nickel, zinc, mercury, iron ions) and organic in the water(phenol, phosphate radical ion). This product is conductive to dislodge various micro pollutants and has no harmful substances.
Therefore, activation zeolite filter is the ideal material for industrial water, waste water treatment and tap water filtration.
Performance Analysis:
Density g/cm3
1.8-2.2
Filtering Velocity m/h
4-12
Volumeweight g/cm3
1.4
Wear Rate%
<0.5
Pore Ratio%
≥50
Broken Rate%
<1.0
Specific Surface Area m2/g
500-800
Silt Content%
<1.0
Hydrochloric Acid Solute Rate%
≤0.1
All Exchange Work Capacity mg/g
2.2-2.5
1.ISO9001
2.High exchange capacity
3.Strong adsorption
4.Lower cost&better service
Zeolite
Instruction:
prevent molecular sieve from exposing directly to the air.
Waring:
molecular sieve adsorption activity is an exothermic reaction,any contact to human body is dangerous.
1. Natural clinoptilolite filter Natural zeolite
is aluminosilicate, the appearance is white or bolarious.
It belongs to weakly acidic cationic exchange agent. After add the activated component, make it has better ion exchange or adsorption ability, and the adsorption energy also increase accordingly.
This kind of filter is mainly used for small boiler water conditioning, removing the calcium,magnesium ions in the water, in order to reduce the boiler scale formation and less the corrosion, at the same prolong the service life of the boiler.
In the waste water treatment, it can wipe off phosphorus, lead and hexavalent chromium. Invalided zeolite can be also used concentrated brine counter-current.
Natural clinoptilolite filter's chemical and physical index:
Proportion(g/cm3)
2.2-2.6
Silt Content%
≤1.0
Volumeweight(g/cm3)
1.6
Moisture%
≤1.5
Ware Rate%
<1.0
Sodium ion Exchange Ability
≥800
2. Activation zeolite filter Activation zeolite filter
is made by the natural zeolite after special activation.
The adsorption ability and the ion exchange capacity is better than the natural zeolite.
It is not only dislodge turbidity, chroma and peculiar smell, but also can adsorb harmful metals in the water(chrome, cadmium, nickel, zinc, mercury, iron ions) and organic in the water(phenol, phosphate radical ion). This product is conductive to dislodge various micro pollutants and has no harmful substances.
Therefore, activation zeolite filter is the ideal material for industrial water, waste water treatment and tap water filtration.
Performance Analysis:
Density g/cm3
1.8-2.2
Filtering Velocity m/h
4-12
Volumeweight g/cm3
1.4
Wear Rate%
<0.5
Pore Ratio%
≥50
Broken Rate%
<1.0
Specific Surface Area m2/g
500-800
Silt Content%
<1.0
Hydrochloric Acid Solute Rate%
≤0.1
All Exchange Work Capacity mg/g
2.2-2.5
Refined Activated Alumina for Desiccant
Defluoridation and desiccant activated alumina
(1) smooth surface
(2) great mechnical strength
(3) best quality
(4)price low
activated alumina
It is used for high fluoride water and a kind of molecular adsorbent
with great specific surface area.
Key technical indexes
Index names
appearance
Bulk specific weight (g/cm
3
)
Specific surface area (m
2
/g)
Pore volume
(cm
3
/g)
Compressive strength
(n/balls)
Wear rate
(W/W, 5%)
AA-102-1
1.6-2.4mm
Min 0.70
Min 300
Min 0.38
Min 35
Max 0.60
AA-102-2
2-3mm
Min 0.70
Min 300
Min 0.38
Min 80
Max 0.60
AA-102-3
3-5mm
Min 0.70
Min 300
Min 0.38
Min 80
Max 0.60
AA-102-4
5-8mm
Min 0.70
Min 300
Min 0.38
Min 80
Max 0.60
Desiccant activated alumina are white globular porosity particles with symmetrical particle size,
They will remain original shape when absorbing water and they are non-poisonous,
no smell, odorless and insoluble to water and organic solvents.
It can be used as deacidificated regenerant of transformer oil and gas drying of
oxygen industry, textile Industry and electronic industry, and air drying of automatic
instrument and meter.
Specific indexes as follows:
Serial number
Index projects
Index requirement
1
Appearance
White
2
Particle size (mm)
1.5-2.4 3-5 5-8
3
Intensity (N/ , average value)
Min150
4
Bulk specific weight (g/cm
3
)
0.7-0.8
5
Pore volume (cm
3
/g)
min0.38
6
Wear rate (%)
max0.6
7
Specific surface area (m
2
/g)
min300
8
Sodium oxide content (Na
2
O, %)
max1.0
9
Water absorption rate (%)
min50
10
Alumina content (AL
2
O
3
)
min92
11
Static adsorption capacity % (RH=60)
min16.8
(1) smooth surface
(2) great mechnical strength
(3) best quality
(4)price low
activated alumina
It is used for high fluoride water and a kind of molecular adsorbent
with great specific surface area.
Key technical indexes
Index names
appearance
Bulk specific weight (g/cm
3
)
Specific surface area (m
2
/g)
Pore volume
(cm
3
/g)
Compressive strength
(n/balls)
Wear rate
(W/W, 5%)
AA-102-1
1.6-2.4mm
Min 0.70
Min 300
Min 0.38
Min 35
Max 0.60
AA-102-2
2-3mm
Min 0.70
Min 300
Min 0.38
Min 80
Max 0.60
AA-102-3
3-5mm
Min 0.70
Min 300
Min 0.38
Min 80
Max 0.60
AA-102-4
5-8mm
Min 0.70
Min 300
Min 0.38
Min 80
Max 0.60
Desiccant activated alumina are white globular porosity particles with symmetrical particle size,
They will remain original shape when absorbing water and they are non-poisonous,
no smell, odorless and insoluble to water and organic solvents.
It can be used as deacidificated regenerant of transformer oil and gas drying of
oxygen industry, textile Industry and electronic industry, and air drying of automatic
instrument and meter.
Specific indexes as follows:
Serial number
Index projects
Index requirement
1
Appearance
White
2
Particle size (mm)
1.5-2.4 3-5 5-8
3
Intensity (N/ , average value)
Min150
4
Bulk specific weight (g/cm
3
)
0.7-0.8
5
Pore volume (cm
3
/g)
min0.38
6
Wear rate (%)
max0.6
7
Specific surface area (m
2
/g)
min300
8
Sodium oxide content (Na
2
O, %)
max1.0
9
Water absorption rate (%)
min50
10
Alumina content (AL
2
O
3
)
min92
11
Static adsorption capacity % (RH=60)
min16.8
Refined Activated Alumina for Water Treatment
Activated Alumina
1.high purity and low dust balls
2.smooth sulface balls
3.Large BET
4.high crush strength
Activated Alumina
Activated alumina
has much micro-paths
, so
the specific surface is large
. It can be used as absorbent desiccant and catalyst carrier. It is also a kind of trace water desiccant and the pole-molecular absorbent, according to the absorbed molecular polarization, the attachment force is strong for water, oxide, acetic acid, alkali etc.
Three main uses of this product:
1. Used for reclaiming degradation product in the working fluid in hydrogen peroxide production by Anthraquinone method, especially in the plants of palladium catalyst and three-component nickel catalyst, there is no other better method for degradation except Aluminum oxide, this kind of special absorbers, which is indispensable to hydrogen peroxide production.
2. Used for deep drying of gas or liquid phase of petrochemicals and adsorption drying by automatic instruments.
3. Used as defluorination in production of alkylbenzene or fordefuorainting in drinking water. It has been used by some home factories and approved that it accords with the technology demands perfectly.
1.high purity and low dust balls
2.smooth sulface balls
3.Large BET
4.high crush strength
Activated Alumina
Activated alumina
has much micro-paths
, so
the specific surface is large
. It can be used as absorbent desiccant and catalyst carrier. It is also a kind of trace water desiccant and the pole-molecular absorbent, according to the absorbed molecular polarization, the attachment force is strong for water, oxide, acetic acid, alkali etc.
Three main uses of this product:
1. Used for reclaiming degradation product in the working fluid in hydrogen peroxide production by Anthraquinone method, especially in the plants of palladium catalyst and three-component nickel catalyst, there is no other better method for degradation except Aluminum oxide, this kind of special absorbers, which is indispensable to hydrogen peroxide production.
2. Used for deep drying of gas or liquid phase of petrochemicals and adsorption drying by automatic instruments.
3. Used as defluorination in production of alkylbenzene or fordefuorainting in drinking water. It has been used by some home factories and approved that it accords with the technology demands perfectly.
Refined Cationic PAM (Flocculant)
PAM
1.Cationic Polyacrylamide
2.White crystal powder
3.Ion Degree:10%-60%;solid content:95%min
4.Origin: in China
1.PAM
2.PAM, Anionic Polyacrylamide
3.Appearance: white granule
4.Molecular weight: 5 - 25million
5.Monomer free: 0.05% max
Anionic PAM, Polyacrylamide
Features:
1) Appearance: white granule
2) Molecular weight: 5 - 22 million minimum
3) Granule: 20 - 100 mesh
4) Solid content: 88% minimum
5) Hydrolyzing degree: 10 - 20%, 20 - 30% or 30 - 40%
6) Dissolving time: 2 hours maximum (10°C)
7) Insoluble: 0.5% maximum
8) Monomer free: 0.05% maximum
.
Application:
(1) used for drinking water purification, water purification, municipal sewage sludge, municipal solid waste and industrial effluent;
(2) oil field exploration and development, geology, water conservancy,coal exploration.
(3) paper-making industry for the clarification of liquid caustic soda, fiber dispersing agent, can improve the beating, the filler retention agents, paper strengthening agent, can be used to improve the treatment rate and the white water recovery;
(4) used in textile, carpet industry, sizing, quick-setting cement, synthetic resin coating. Photosensitive polymers, adhesives, dispersing agent, as well as agricultural soil gel, slurry stabilizers, soil amendments;
(5) the sugar syrup for the industry to clarify the agent;
Polyacrylamide anion type PAM quality indexes:
Item
C1610
C1620
C1635
C1650
Ion Density
low
Middle
Middle
High
Molecular Weight (ten thousand)
1000-1200
1000-1200
800-1000
800-1000
Solid Content ≥%
90
90
90
90
Free Monomer≤%
0.05
0.05
0.05
0.05
Dissolved Time ≤min
40
40
40
40
Polyacrylamide cation type PAM quality indexes:
Test Item/Molecular Weight
800-1000
1000-1200
1300-1500
1600-2000
Ion Density
25-45
45-55
55-60
65-75
Solid Content %
88±2%
88±2%
88±2%
88±2%
Hydrolysis Degree %
20-30
20-30
20-30
20-30
Remain Monomer
≤0.05
≤0.05
≤0.05
≤0.05
Dissolved Time
≤2h
≤2h
≤2h
≤2h
1.Cationic Polyacrylamide
2.White crystal powder
3.Ion Degree:10%-60%;solid content:95%min
4.Origin: in China
1.PAM
2.PAM, Anionic Polyacrylamide
3.Appearance: white granule
4.Molecular weight: 5 - 25million
5.Monomer free: 0.05% max
Anionic PAM, Polyacrylamide
Features:
1) Appearance: white granule
2) Molecular weight: 5 - 22 million minimum
3) Granule: 20 - 100 mesh
4) Solid content: 88% minimum
5) Hydrolyzing degree: 10 - 20%, 20 - 30% or 30 - 40%
6) Dissolving time: 2 hours maximum (10°C)
7) Insoluble: 0.5% maximum
8) Monomer free: 0.05% maximum
.
Application:
(1) used for drinking water purification, water purification, municipal sewage sludge, municipal solid waste and industrial effluent;
(2) oil field exploration and development, geology, water conservancy,coal exploration.
(3) paper-making industry for the clarification of liquid caustic soda, fiber dispersing agent, can improve the beating, the filler retention agents, paper strengthening agent, can be used to improve the treatment rate and the white water recovery;
(4) used in textile, carpet industry, sizing, quick-setting cement, synthetic resin coating. Photosensitive polymers, adhesives, dispersing agent, as well as agricultural soil gel, slurry stabilizers, soil amendments;
(5) the sugar syrup for the industry to clarify the agent;
Polyacrylamide anion type PAM quality indexes:
Item
C1610
C1620
C1635
C1650
Ion Density
low
Middle
Middle
High
Molecular Weight (ten thousand)
1000-1200
1000-1200
800-1000
800-1000
Solid Content ≥%
90
90
90
90
Free Monomer≤%
0.05
0.05
0.05
0.05
Dissolved Time ≤min
40
40
40
40
Polyacrylamide cation type PAM quality indexes:
Test Item/Molecular Weight
800-1000
1000-1200
1300-1500
1600-2000
Ion Density
25-45
45-55
55-60
65-75
Solid Content %
88±2%
88±2%
88±2%
88±2%
Hydrolysis Degree %
20-30
20-30
20-30
20-30
Remain Monomer
≤0.05
≤0.05
≤0.05
≤0.05
Dissolved Time
≤2h
≤2h
≤2h
≤2h
Refined Flocculants water treatment Zwitterionic Pam
water treatment
1.Good quality Sewage treatment auxiliaries
2.Best Price,first quality
3.Certificate:ISO9001:2000
Zwitterionic PAM
Production art:
The zwitterionic PAM is made by the vinyl amide, cationic monomer vinyl, and acrylamide. By infuriated spectroscopy analysis, it not only has the negative carboxyl charge after hydrolysis, but also has vinyl positive charge on the constitutes both have the positive charge on the molecular chain and have negative charge of the zwitterionic irregular polymers.
Main usage:
1) Plugging agent, it is test by the oil field. The agent is more effective than other single ion agent.
2) The most update water treatment chemical. When it is used on many wastewater treatment scenes, it can reduce more surface press than anionic PAM or the cationic PAM.
3) Sludge dewatering agent .Because much complexer the Sewage Disposal, the higher requirement it need in the wastewater treatment. Especially for the refinery and chemical industry, the effect will be more outstanding.
4) Paper making industry usage, it has special function in the filter aid and retention, for it can improve the running water speed under the net. Also it can reduce the fiber packing loss, can effect to the wet system. Into the paper on the smoothness, strength, and both sides have to promote and compensate.
Model
Molecular weight (10000)
Cation
Anionic degree
Solubility h
Solid Content
PH effective scope
Appearance
PAM-2A-1
800-1000
5-20
10
≤2
≥89
1-14
White powder or granular
PAM-2A-2
600-800
5-20
25
≤2
≥89
1-14
White powder or granular
PAM-2A-3
400-600
50
10
≤2
≥89
1-14
White powder or granular
1.Good quality Sewage treatment auxiliaries
2.Best Price,first quality
3.Certificate:ISO9001:2000
Zwitterionic PAM
Production art:
The zwitterionic PAM is made by the vinyl amide, cationic monomer vinyl, and acrylamide. By infuriated spectroscopy analysis, it not only has the negative carboxyl charge after hydrolysis, but also has vinyl positive charge on the constitutes both have the positive charge on the molecular chain and have negative charge of the zwitterionic irregular polymers.
Main usage:
1) Plugging agent, it is test by the oil field. The agent is more effective than other single ion agent.
2) The most update water treatment chemical. When it is used on many wastewater treatment scenes, it can reduce more surface press than anionic PAM or the cationic PAM.
3) Sludge dewatering agent .Because much complexer the Sewage Disposal, the higher requirement it need in the wastewater treatment. Especially for the refinery and chemical industry, the effect will be more outstanding.
4) Paper making industry usage, it has special function in the filter aid and retention, for it can improve the running water speed under the net. Also it can reduce the fiber packing loss, can effect to the wet system. Into the paper on the smoothness, strength, and both sides have to promote and compensate.
Model
Molecular weight (10000)
Cation
Anionic degree
Solubility h
Solid Content
PH effective scope
Appearance
PAM-2A-1
800-1000
5-20
10
≤2
≥89
1-14
White powder or granular
PAM-2A-2
600-800
5-20
25
≤2
≥89
1-14
White powder or granular
PAM-2A-3
400-600
50
10
≤2
≥89
1-14
White powder or granular
Refined Hongda coal-based columnar activated carbon
Coal-based columnar activated carbon
1.high-quality anthracite
2.proper pore structure
3.iodine value/more than 800mg/g
Coal-based columnar activated carbon
1. It uses high-quality anthracite as raw material.
It is produced by a series of refined process with advanced technology.
2. The products are black cylindrical particles with proper pore structure.
3. Characteristics:
good adsorptive ability
great mechanical intensity
renewable easily and low cost, etc.
4. It is used in the purification of toxic gas masks, waste gases treatment,
water treatment and solvent recycling of industrial and domestic water, etc.
Analysis of physical and chemical properties:
Analysis projects
Test data
Analysis projects
Test date
Iodine value
More than 800mg/g
Intensity
More than 92%
Specific surface area
More than
850m
2
/g
Methylene blue value
120-150mg/g
Total pore volume
More than
0.8 cm
3
/g
Residual chlorine adsorptive rate
Min 85%
Filling density
0.45-0.75g/cm
3
Note: as manufacturer, customized specifications are available.
1.high-quality anthracite
2.proper pore structure
3.iodine value/more than 800mg/g
Coal-based columnar activated carbon
1. It uses high-quality anthracite as raw material.
It is produced by a series of refined process with advanced technology.
2. The products are black cylindrical particles with proper pore structure.
3. Characteristics:
good adsorptive ability
great mechanical intensity
renewable easily and low cost, etc.
4. It is used in the purification of toxic gas masks, waste gases treatment,
water treatment and solvent recycling of industrial and domestic water, etc.
Analysis of physical and chemical properties:
Analysis projects
Test data
Analysis projects
Test date
Iodine value
More than 800mg/g
Intensity
More than 92%
Specific surface area
More than
850m
2
/g
Methylene blue value
120-150mg/g
Total pore volume
More than
0.8 cm
3
/g
Residual chlorine adsorptive rate
Min 85%
Filling density
0.45-0.75g/cm
3
Note: as manufacturer, customized specifications are available.
Refined Powder Poly Aluminium Chloride PAC 30%
Poly aluminium Chloride PAC 30%
1,water purification effect is obvious
2,flock speed is quick
3,a new type flocculant
Poly aluminium Chloride PAC 30%
is based on polyaluminium chloride, ferric oxide, aluminium salt and malysite after coagulation treatment.
It combines the advantages of aluminium salt and malysite, for the aluminium ion and iron ion's form improving remarkably.
Liquid type:
It is the brown or brick red transparent body and deposit- free.
Solid type:
It is sepia or brick red powder and crystal grain, easily soluble in water.
Application
Poly Aluminium Chloride(PAC) can be used in the clarification of drinking water, polluted industrial wastewater and industrial sewege.
Usage
1. Solid PAC should be used after being dissolved in water and the dilution ratio is generally 2%-20%( weight percentage )
2. The dosage is generally 1-15g per ton. Meanwhile, the specific dosage should be subject to users' actual experiment considering the specific water quality and turbidity.
Cautions
1. It cannot be stored together with other chemical reagents.
2. The storage period of solid PAC should be 2 years while being stored in ventilated and dry place. The performance will not change even through being damped.
Key technical indexes:
Item
Polyaluminium Chloride
Liquid Type
Solid Type
Relative Density(20°C)
1.19
PH Value(1%aqueous solution)
3.5-4.5
3.5-4.5
Al2O3 Content
10.0
29
Ferric Oxide Content
1-2
2-3
Basicity %
60-95
60-95
Water Insoluble Content %
<0.3
<0.1
As %
<0.0003
<0.0006
Mn %
≤0.045
≤0.01
Pb %
≤0.001
≤0.003
Hg %
≤0.00002
≤0.00006
SO4 %
3.5-9.6
3.5-10.0
1,water purification effect is obvious
2,flock speed is quick
3,a new type flocculant
Poly aluminium Chloride PAC 30%
is based on polyaluminium chloride, ferric oxide, aluminium salt and malysite after coagulation treatment.
It combines the advantages of aluminium salt and malysite, for the aluminium ion and iron ion's form improving remarkably.
Liquid type:
It is the brown or brick red transparent body and deposit- free.
Solid type:
It is sepia or brick red powder and crystal grain, easily soluble in water.
Application
Poly Aluminium Chloride(PAC) can be used in the clarification of drinking water, polluted industrial wastewater and industrial sewege.
Usage
1. Solid PAC should be used after being dissolved in water and the dilution ratio is generally 2%-20%( weight percentage )
2. The dosage is generally 1-15g per ton. Meanwhile, the specific dosage should be subject to users' actual experiment considering the specific water quality and turbidity.
Cautions
1. It cannot be stored together with other chemical reagents.
2. The storage period of solid PAC should be 2 years while being stored in ventilated and dry place. The performance will not change even through being damped.
Key technical indexes:
Item
Polyaluminium Chloride
Liquid Type
Solid Type
Relative Density(20°C)
1.19
PH Value(1%aqueous solution)
3.5-4.5
3.5-4.5
Al2O3 Content
10.0
29
Ferric Oxide Content
1-2
2-3
Basicity %
60-95
60-95
Water Insoluble Content %
<0.3
<0.1
As %
<0.0003
<0.0006
Mn %
≤0.045
≤0.01
Pb %
≤0.001
≤0.003
Hg %
≤0.00002
≤0.00006
SO4 %
3.5-9.6
3.5-10.0
Refined poly aluminium chloride For Drinking Water
1)Best price Poly aluminium Chloride
2)poly aluminium chloride Al2O3: 28% 30% 33%
3)GB/T ISO9001:2008
free sample PAC
Best selling in Europe Poly aluminium Chloride
Poly aluminium chloride
FOB Tianjin Price: USD255-350 per ton
minum Chloride,
Features:
1) Made from pure raw material
2) Used for drinking water treatment and paper mills as retention agent
3) Appearance: solid powder, yellow
4) Al
2
O
3
: 30% (min.)
5) Basicity: 50.0% ~ 85.0%
6) Insolubles: 0.5% (max.)
7) PH (1% water solution): 3.5 ~ 5.0
8) SO
4
2-
: 3.5% (max.)
9) N: 0.09% (max.)
10) As: 0.0005% max
11) Mn: 0.045% (max.)
12) Cr
6+
: 0.0015% (max.)
13) Hg: 0.00002% (max.)
14) Pb: 0.003% (max.)
15) Cd: 0.0006% (max.)
16) Fe: 0.008% (max.)
Discription :
PAC (Poly aluminium Chloride) abbreviate to the PAC. Often referred to aluminum chlorideor or mixing mud agent, which is a water-soluble inorganic polymers between ALCL3 and AL(OH) 3, the chemical formula is [AL2 (OH) NCL6- NLm] ,'m' refer to the extent of polymerization, 'n' stand for the neutral level of poly aluminium chloride products.
2)poly aluminium chloride Al2O3: 28% 30% 33%
3)GB/T ISO9001:2008
free sample PAC
Best selling in Europe Poly aluminium Chloride
Poly aluminium chloride
FOB Tianjin Price: USD255-350 per ton
minum Chloride,
Features:
1) Made from pure raw material
2) Used for drinking water treatment and paper mills as retention agent
3) Appearance: solid powder, yellow
4) Al
2
O
3
: 30% (min.)
5) Basicity: 50.0% ~ 85.0%
6) Insolubles: 0.5% (max.)
7) PH (1% water solution): 3.5 ~ 5.0
8) SO
4
2-
: 3.5% (max.)
9) N: 0.09% (max.)
10) As: 0.0005% max
11) Mn: 0.045% (max.)
12) Cr
6+
: 0.0015% (max.)
13) Hg: 0.00002% (max.)
14) Pb: 0.003% (max.)
15) Cd: 0.0006% (max.)
16) Fe: 0.008% (max.)
Discription :
PAC (Poly aluminium Chloride) abbreviate to the PAC. Often referred to aluminum chlorideor or mixing mud agent, which is a water-soluble inorganic polymers between ALCL3 and AL(OH) 3, the chemical formula is [AL2 (OH) NCL6- NLm] ,'m' refer to the extent of polymerization, 'n' stand for the neutral level of poly aluminium chloride products.
Refined poly aluminium chloride For Drinking Water
1)Best price Poly aluminium Chloride
2)poly aluminium chloride Al2O3: 28% 30% 33%
3)GB/T ISO9001:2008 ploy aluminum chloride
Best selling in Europe Poly aluminium Chloride
Poly aluminium chloride
FOB Tianjin Price: USD255-350 per ton
minum Chloride, poly aluminium chloride
Features:
1) Made from pure raw material
2) Used for drinking water treatment and paper mills as retention agent
3) Appearance: solid powder, yellow
4) Al
2
O
3
: 30% (min.)
5) Basicity: 50.0% ~ 85.0%
6) Insolubles: 0.5% (max.)
7) PH (1% water solution): 3.5 ~ 5.0
8) SO
4
2-
: 3.5% (max.)
9) N: 0.09% (max.)
10) As: 0.0005% max
11) Mn: 0.045% (max.)
12) Cr
6+
: 0.0015% (max.)
13) Hg: 0.00002% (max.)
14) Pb: 0.003% (max.)
15) Cd: 0.0006% (max.)
16) Fe: 0.008% (max.)
Discription :
PAC (Poly aluminium Chloride) abbreviate to the PAC. Often referred to aluminum chlorideor or mixing mud agent, which is a water-soluble inorganic polymers between ALCL3 and AL(OH) 3, the chemical formula is [AL2 (OH) NCL6- NLm] ,'m' refer to the extent of polymerization, 'n' stand for the neutral level of PAC products.
2)poly aluminium chloride Al2O3: 28% 30% 33%
3)GB/T ISO9001:2008 ploy aluminum chloride
Best selling in Europe Poly aluminium Chloride
Poly aluminium chloride
FOB Tianjin Price: USD255-350 per ton
minum Chloride, poly aluminium chloride
Features:
1) Made from pure raw material
2) Used for drinking water treatment and paper mills as retention agent
3) Appearance: solid powder, yellow
4) Al
2
O
3
: 30% (min.)
5) Basicity: 50.0% ~ 85.0%
6) Insolubles: 0.5% (max.)
7) PH (1% water solution): 3.5 ~ 5.0
8) SO
4
2-
: 3.5% (max.)
9) N: 0.09% (max.)
10) As: 0.0005% max
11) Mn: 0.045% (max.)
12) Cr
6+
: 0.0015% (max.)
13) Hg: 0.00002% (max.)
14) Pb: 0.003% (max.)
15) Cd: 0.0006% (max.)
16) Fe: 0.008% (max.)
Discription :
PAC (Poly aluminium Chloride) abbreviate to the PAC. Often referred to aluminum chlorideor or mixing mud agent, which is a water-soluble inorganic polymers between ALCL3 and AL(OH) 3, the chemical formula is [AL2 (OH) NCL6- NLm] ,'m' refer to the extent of polymerization, 'n' stand for the neutral level of PAC products.
Acid copper plating functional intermeidate SPS cas no. 27206-35-5
Acid copper plating functional intermeidate SPS cas no. 27206-35-5
Acid Copper plating intermediate
Acid copper plating functional intermeidate SPSCopper functional and decorative plating intermediate SPS
Chemical name
Bis-(sodium sulfopropyl)-disulfide
Empirical formula
C6H12O6S4Na2
Molecular weight
354.4
CAS No.
27206-35-5
Characteristic:
Appearance
White or yellowish powder
Assay
95.0%
PH
3-7(38%water solution)
Concentration in the bath
10-100mg/L
Application
Brightener in copper baths for decorative and functional deposits
Nickel Plating Chemicals
Lasting Brightener and leveling agent
BOZ, BEO, BMP...
Fast Brightener and Leveling agent
PA, PAP, PME..
Brighter and Strong/Lasting leveling agent
DEP, PABS, TC-DEP..
Stronger Leveling agent
PPS, PPS-OH..
Auxiliary & Assistant Brightener
ALS, VS, EHS,BBI..
Impurity Tolerance
ATPN , SSO3, PN, PZN, FEZX ..
Brighter and leveling agent at low area light
POPDH, PS, POPS,..
Low foam wetting agent
TC-EHS, MA-80, ..
Semi-Bright
HD-M, HD-N, TCA, ..
Zinc Plating Chemicals
Acid Zinc Plating
BAR, OCBA, OCT-5, OCT-15..
Alkaline Zinc Plating
WT. BPC 48, DPE,IMZE,JC-9, IMC,H1,HETM...
Copper Plating Chemicals
Alkaline Copper plating (Brightener& leveling agent)
CB-1, CB-4, CB-5,CB-6...
Acid Copper Plating
SPS, PZ-1,PZ-2, PZ-3, PAC, BY-1, PAE-9, Polyether-8, Water-soluble M, H1, P-6000, PNP, UPS, DPS, ZPS, MPS, ...
Fine Chemicals
1,3-PS, EDTP, Q75, Propargyl Chloride, Basic Chromic Sulfate, Chromiun Nitrate....
Acid Copper plating intermediate
Acid copper plating functional intermeidate SPSCopper functional and decorative plating intermediate SPS
Chemical name
Bis-(sodium sulfopropyl)-disulfide
Empirical formula
C6H12O6S4Na2
Molecular weight
354.4
CAS No.
27206-35-5
Characteristic:
Appearance
White or yellowish powder
Assay
95.0%
PH
3-7(38%water solution)
Concentration in the bath
10-100mg/L
Application
Brightener in copper baths for decorative and functional deposits
Nickel Plating Chemicals
Lasting Brightener and leveling agent
BOZ, BEO, BMP...
Fast Brightener and Leveling agent
PA, PAP, PME..
Brighter and Strong/Lasting leveling agent
DEP, PABS, TC-DEP..
Stronger Leveling agent
PPS, PPS-OH..
Auxiliary & Assistant Brightener
ALS, VS, EHS,BBI..
Impurity Tolerance
ATPN , SSO3, PN, PZN, FEZX ..
Brighter and leveling agent at low area light
POPDH, PS, POPS,..
Low foam wetting agent
TC-EHS, MA-80, ..
Semi-Bright
HD-M, HD-N, TCA, ..
Zinc Plating Chemicals
Acid Zinc Plating
BAR, OCBA, OCT-5, OCT-15..
Alkaline Zinc Plating
WT. BPC 48, DPE,IMZE,JC-9, IMC,H1,HETM...
Copper Plating Chemicals
Alkaline Copper plating (Brightener& leveling agent)
CB-1, CB-4, CB-5,CB-6...
Acid Copper Plating
SPS, PZ-1,PZ-2, PZ-3, PAC, BY-1, PAE-9, Polyether-8, Water-soluble M, H1, P-6000, PNP, UPS, DPS, ZPS, MPS, ...
Fine Chemicals
1,3-PS, EDTP, Q75, Propargyl Chloride, Basic Chromic Sulfate, Chromiun Nitrate....
Refined superfine Solid Polymer Ferric Sulfate SPFS
SPFS is a flocculant in purification of municipal water, industrial water, waste water, domestic sewage and sludge dewatering.
Based on the product of Polymer Ferric Sulphate, we develop a new inorganic polymer to decolor the sewage of dyeing and printing industry, it has no the defects of Polymer Ferric Sulphate. It solution is weak acid.
Properties:
1, New type, high quality, high iron salts of inorganic polymer flocculants.
2, Coagulation excellent, alum dense, fast settlement.
3, excellent water effect, good water quality, aluminum, chlorine, and heavy metal ion are not included, non-toxic, harmless, safe.
4, turbidity remove, decolorization, oil off, dehydration, sterilization, deodorant, algal removal, remove the COD,BOD and heavy metal ion.
5, PH value of water
bodies
meet the range of 4-11, the best PH valuerange is 6-9, after purified, the PH value and alkalinity in the raw water has small changes, it has small corrosion to equipment.
6, it has visible effect to raw water purify for slight polluted, with algae, low temperature, low turbidity. It is preferred to high turbidity raw water purification.
7, dosage is small, low cost, handling charge can save 20%-50%.
Specifications
1,Condensate settlement rate
2,alum large, with excellent dewatering performance
3, better than the GB14591-2006
Sulfate, molecular formula:,-based company developed an efficient flocculant. The mechanism of its water: hydrolysis can produce a variety of high and multi-core complex ion, colloidal particles suspended in water in the electrical and, lower point and to promote cohesion between particles, while producing adsorption, bridging crosslinking. Its role is characterized by: condensate settlement rate, alum large, with excellent dewatering performance. Indicators met or better than the GB14591-2006 "Water Treatment PFS" requirements. Use PFSP of tons of sewage treatment can significantly reduce drug costs.
Item
Recommended dosage
Item
Recommended dosage
Municipal water
1:20000-1:200000
Paper board making effluent
1:5000-1:10000
Industrial water
1:20000-1:200000
Mechanical processing effluent
1:5000-1:12000
Domestic sewage
1:10000-1:50000
Chemical plant effluent
1:3000-1:10000
Power plant effluent
1:10000-1:30000
Oil drilling effluent
1:3000-1:10000
Coal washery effluent
1:10000-1:30000
Paint making effluent
1:3000-1:8000
Steel plant effluent
1:10000-1:20000
Scouring effluent
1:2000-1:8000
Mineral separation effluent
1:8000-1:20000
Leather fabricating effluent
1:2000-1:6000
Metallurgy effluent
1:8000-20000
Dye & printing effluent
1:2000-1:6000
Food processing effluent
1:8000-1:20000
Papermaking effluent
1:2000-1:6000
Electroplating effluent
1:5000-1:10000
Sludge dehydration
1:100-1:1000
Based on the product of Polymer Ferric Sulphate, we develop a new inorganic polymer to decolor the sewage of dyeing and printing industry, it has no the defects of Polymer Ferric Sulphate. It solution is weak acid.
Properties:
1, New type, high quality, high iron salts of inorganic polymer flocculants.
2, Coagulation excellent, alum dense, fast settlement.
3, excellent water effect, good water quality, aluminum, chlorine, and heavy metal ion are not included, non-toxic, harmless, safe.
4, turbidity remove, decolorization, oil off, dehydration, sterilization, deodorant, algal removal, remove the COD,BOD and heavy metal ion.
5, PH value of water
bodies
meet the range of 4-11, the best PH valuerange is 6-9, after purified, the PH value and alkalinity in the raw water has small changes, it has small corrosion to equipment.
6, it has visible effect to raw water purify for slight polluted, with algae, low temperature, low turbidity. It is preferred to high turbidity raw water purification.
7, dosage is small, low cost, handling charge can save 20%-50%.
Specifications
1,Condensate settlement rate
2,alum large, with excellent dewatering performance
3, better than the GB14591-2006
Sulfate, molecular formula:,-based company developed an efficient flocculant. The mechanism of its water: hydrolysis can produce a variety of high and multi-core complex ion, colloidal particles suspended in water in the electrical and, lower point and to promote cohesion between particles, while producing adsorption, bridging crosslinking. Its role is characterized by: condensate settlement rate, alum large, with excellent dewatering performance. Indicators met or better than the GB14591-2006 "Water Treatment PFS" requirements. Use PFSP of tons of sewage treatment can significantly reduce drug costs.
Item
Recommended dosage
Item
Recommended dosage
Municipal water
1:20000-1:200000
Paper board making effluent
1:5000-1:10000
Industrial water
1:20000-1:200000
Mechanical processing effluent
1:5000-1:12000
Domestic sewage
1:10000-1:50000
Chemical plant effluent
1:3000-1:10000
Power plant effluent
1:10000-1:30000
Oil drilling effluent
1:3000-1:10000
Coal washery effluent
1:10000-1:30000
Paint making effluent
1:3000-1:8000
Steel plant effluent
1:10000-1:20000
Scouring effluent
1:2000-1:8000
Mineral separation effluent
1:8000-1:20000
Leather fabricating effluent
1:2000-1:6000
Metallurgy effluent
1:8000-20000
Dye & printing effluent
1:2000-1:6000
Food processing effluent
1:8000-1:20000
Papermaking effluent
1:2000-1:6000
Electroplating effluent
1:5000-1:10000
Sludge dehydration
1:100-1:1000
Refractory Ball
Refractory Ball
High strength, long use period
Chemical stability, it will not react with our materials
Refractory Ball
Refractory ball usually used in shift converter and reformer in ammonia plant. Refractory ball has a lot of advantages, such as:
High strength, long use period
Chemical stability, it won’t react with our materials
Good performance of resistance high temperature, resistance high temperature up to 1900°C
Technical
Specification
Index
Unit
Data
Al
2
O
3
%
≥65
Fe
2
O
3
%
≤1.6
Pore Volume
%
≤24
Compressive strength
kg/cm
2
≥ 900
Refractoriness
°C
≥1800
Bulk Density
kg/m
3
≥1386
Specific Gravity
kg/m
3
≥2350
Refractoriness °C under load of 2kg/cm
2
°C
≥1500
LOI
%
≤0.1
Application
Specially used in the high-low temperature shift furnace, converter, hydrogenation shift furnace, desulfurization furnace, etc
Used in the hot wind furnace and heat up shift appliance in steel plant.
Package
Plastic bag, each bag 25kg net.
High strength, long use period
Chemical stability, it will not react with our materials
Refractory Ball
Refractory ball usually used in shift converter and reformer in ammonia plant. Refractory ball has a lot of advantages, such as:
High strength, long use period
Chemical stability, it won’t react with our materials
Good performance of resistance high temperature, resistance high temperature up to 1900°C
Technical
Specification
Index
Unit
Data
Al
2
O
3
%
≥65
Fe
2
O
3
%
≤1.6
Pore Volume
%
≤24
Compressive strength
kg/cm
2
≥ 900
Refractoriness
°C
≥1800
Bulk Density
kg/m
3
≥1386
Specific Gravity
kg/m
3
≥2350
Refractoriness °C under load of 2kg/cm
2
°C
≥1500
LOI
%
≤0.1
Application
Specially used in the high-low temperature shift furnace, converter, hydrogenation shift furnace, desulfurization furnace, etc
Used in the hot wind furnace and heat up shift appliance in steel plant.
Package
Plastic bag, each bag 25kg net.
Refractory Ball
Refractory Ball
High strength, long use period
Chemical stability, it will not react with our materials
Refractory Ball
Refractory ball usually used in shift converter and reformer in ammonia plant. Refractory ball has a lot of advantages, such as:
High strength, long use period
Chemical stability, it won’t react with our materials
Good performance of resistance high temperature, resistance high temperature up to 1900°C
Technical
Specification
Index
Unit
Data
Al
2
O
3
%
≥65
Fe
2
O
3
%
≤1.6
Pore Volume
%
≤24
Compressive strength
kg/cm
2
≥ 900
Refractoriness
°C
≥1800
Bulk Density
kg/m
3
≥1386
Specific Gravity
kg/m
3
≥2350
Refractoriness °C under load of 2kg/cm
2
°C
≥1500
LOI
%
≤0.1
Application
Specially used in the high-low temperature shift furnace, converter, hydrogenation shift furnace, desulfurization furnace, etc
Used in the hot wind furnace and heat up shift appliance in steel plant.
Package
Plastic bag, each bag 25kg net.
High strength, long use period
Chemical stability, it will not react with our materials
Refractory Ball
Refractory ball usually used in shift converter and reformer in ammonia plant. Refractory ball has a lot of advantages, such as:
High strength, long use period
Chemical stability, it won’t react with our materials
Good performance of resistance high temperature, resistance high temperature up to 1900°C
Technical
Specification
Index
Unit
Data
Al
2
O
3
%
≥65
Fe
2
O
3
%
≤1.6
Pore Volume
%
≤24
Compressive strength
kg/cm
2
≥ 900
Refractoriness
°C
≥1800
Bulk Density
kg/m
3
≥1386
Specific Gravity
kg/m
3
≥2350
Refractoriness °C under load of 2kg/cm
2
°C
≥1500
LOI
%
≤0.1
Application
Specially used in the high-low temperature shift furnace, converter, hydrogenation shift furnace, desulfurization furnace, etc
Used in the hot wind furnace and heat up shift appliance in steel plant.
Package
Plastic bag, each bag 25kg net.
Refractory Ball
Refractory Ball
1.Professional manufacturer & exporter of refractory ball
2.Used in shift converter & reformer
Refractory Ball
Refractory ball usually used in shift converter and reformer in ammonia plant. Refractory ball has a lot of advantages, such as:
High strength, long use period
Chemical stability, it won’t react with our materials
Good performance of resistance high temperature, resistance high temperature up to 1900°C
Technical
Specification
Index
Unit
Data
Al
2
O
3
%
≥65
Fe
2
O
3
%
≤1.6
Pore Volume
%
≤24
Compressive strength
kg/cm
2
≥ 900
Refractoriness
°C
≥1800
Bulk Density
kg/m
3
≥1386
Specific Gravity
kg/m
3
≥2350
Refractoriness °C under load of 2kg/cm
2
°C
≥1500
LOI
%
≤0.1
Application
Specially used in the high-low temperature shift furnace, converter, hydrogenation shift furnace, desulfurization furnace, etc
Used in the hot wind furnace and heat up shift appliance in steel plant.
Package
Plastic bag, each bag 25kg net.
1.Professional manufacturer & exporter of refractory ball
2.Used in shift converter & reformer
Refractory Ball
Refractory ball usually used in shift converter and reformer in ammonia plant. Refractory ball has a lot of advantages, such as:
High strength, long use period
Chemical stability, it won’t react with our materials
Good performance of resistance high temperature, resistance high temperature up to 1900°C
Technical
Specification
Index
Unit
Data
Al
2
O
3
%
≥65
Fe
2
O
3
%
≤1.6
Pore Volume
%
≤24
Compressive strength
kg/cm
2
≥ 900
Refractoriness
°C
≥1800
Bulk Density
kg/m
3
≥1386
Specific Gravity
kg/m
3
≥2350
Refractoriness °C under load of 2kg/cm
2
°C
≥1500
LOI
%
≤0.1
Application
Specially used in the high-low temperature shift furnace, converter, hydrogenation shift furnace, desulfurization furnace, etc
Used in the hot wind furnace and heat up shift appliance in steel plant.
Package
Plastic bag, each bag 25kg net.
Refractory Ball
Refractory Ball
1.Professional manufacturer & exporter of refractory ball
2.Used in shift converter & reformer
Refractory Ball
Refractory ball usually used in shift converter and reformer in ammonia plant. Refractory ball has a lot of advantages, such as:
High strength, long use period
Chemical stability, it won’t react with our materials
Good performance of resistance high temperature, resistance high temperature up to 1900°C
Technical
Specification
Index
Unit
Data
Al
2
O
3
%
≥65
Fe
2
O
3
%
≤1.6
Pore Volume
%
≤24
Compressive strength
kg/cm
2
≥ 900
Refractoriness
°C
≥1800
Bulk Density
kg/m
3
≥1386
Specific Gravity
kg/m
3
≥2350
Refractoriness °C under load of 2kg/cm
2
°C
≥1500
LOI
%
≤0.1
Application
Specially used in the high-low temperature shift furnace, converter, hydrogenation shift furnace, desulfurization furnace, etc
Used in the hot wind furnace and heat up shift appliance in steel plant.
Package
Plastic bag, each bag 25kg net.
1.Professional manufacturer & exporter of refractory ball
2.Used in shift converter & reformer
Refractory Ball
Refractory ball usually used in shift converter and reformer in ammonia plant. Refractory ball has a lot of advantages, such as:
High strength, long use period
Chemical stability, it won’t react with our materials
Good performance of resistance high temperature, resistance high temperature up to 1900°C
Technical
Specification
Index
Unit
Data
Al
2
O
3
%
≥65
Fe
2
O
3
%
≤1.6
Pore Volume
%
≤24
Compressive strength
kg/cm
2
≥ 900
Refractoriness
°C
≥1800
Bulk Density
kg/m
3
≥1386
Specific Gravity
kg/m
3
≥2350
Refractoriness °C under load of 2kg/cm
2
°C
≥1500
LOI
%
≤0.1
Application
Specially used in the high-low temperature shift furnace, converter, hydrogenation shift furnace, desulfurization furnace, etc
Used in the hot wind furnace and heat up shift appliance in steel plant.
Package
Plastic bag, each bag 25kg net.
Refractory Ball
Refractory Ball
1.Professional manufacturer & exporter of refractory ball
2.Used in shift converter & reformer
Refractory Ball
Refractory ball usually used in shift converter and reformer in ammonia plant. Refractory ball has a lot of advantages, such as:
High strength, long use period
Chemical stability, it won’t react with our materials
Good performance of resistance high temperature, resistance high temperature up to 1900°C
Technical
Specification
Index
Unit
Data
Al
2
O
3
%
≥65
Fe
2
O
3
%
≤1.6
Pore Volume
%
≤24
Compressive strength
kg/cm
2
≥ 900
Refractoriness
°C
≥1800
Bulk Density
kg/m
3
≥1386
Specific Gravity
kg/m
3
≥2350
Refractoriness °C under load of 2kg/cm
2
°C
≥1500
LOI
%
≤0.1
Application
Specially used in the high-low temperature shift furnace, converter, hydrogenation shift furnace, desulfurization furnace, etc
Used in the hot wind furnace and heat up shift appliance in steel plant.
Package
Plastic bag, each bag 25kg net.
1.Professional manufacturer & exporter of refractory ball
2.Used in shift converter & reformer
Refractory Ball
Refractory ball usually used in shift converter and reformer in ammonia plant. Refractory ball has a lot of advantages, such as:
High strength, long use period
Chemical stability, it won’t react with our materials
Good performance of resistance high temperature, resistance high temperature up to 1900°C
Technical
Specification
Index
Unit
Data
Al
2
O
3
%
≥65
Fe
2
O
3
%
≤1.6
Pore Volume
%
≤24
Compressive strength
kg/cm
2
≥ 900
Refractoriness
°C
≥1800
Bulk Density
kg/m
3
≥1386
Specific Gravity
kg/m
3
≥2350
Refractoriness °C under load of 2kg/cm
2
°C
≥1500
LOI
%
≤0.1
Application
Specially used in the high-low temperature shift furnace, converter, hydrogenation shift furnace, desulfurization furnace, etc
Used in the hot wind furnace and heat up shift appliance in steel plant.
Package
Plastic bag, each bag 25kg net.
Renewable easily--Nutshell activated carbon
Nutshell activated carbon
1.produced by physical methods and refined management.
2.great intensity, epigranular
Nutshell activated carbon
(1).Nutshell activated carbon can be used in liquid phrase and gas phrase adsorption, the purification of tap water, industrial water, electroplating wastewater, purified water, beverages, food, and medical water as well as the preparation of electronic ultrapure water.
(2).In addition, it is also used in other aspects, such as, de-colorization, decontamination and odor elimination of fat, oils, gasoline and diesel oil and purification, deodorization, and decontamination of wines and beverages.
(3).Analysis of physical and chemical properties:
Phenol adsorption
Min 450mg/g
Bulk specific weight
0.5-0.65g/ cm
3
Intensity
Min 80-95%
Total pore volume
o.7-1 cm
3
/g
Iodine value
700-1000mg/g
Specific surface area
590-1500m
2
/g
Methylene blue value
100-150mg/g
PH value
8-10
1.produced by physical methods and refined management.
2.great intensity, epigranular
Nutshell activated carbon
(1).Nutshell activated carbon can be used in liquid phrase and gas phrase adsorption, the purification of tap water, industrial water, electroplating wastewater, purified water, beverages, food, and medical water as well as the preparation of electronic ultrapure water.
(2).In addition, it is also used in other aspects, such as, de-colorization, decontamination and odor elimination of fat, oils, gasoline and diesel oil and purification, deodorization, and decontamination of wines and beverages.
(3).Analysis of physical and chemical properties:
Phenol adsorption
Min 450mg/g
Bulk specific weight
0.5-0.65g/ cm
3
Intensity
Min 80-95%
Total pore volume
o.7-1 cm
3
/g
Iodine value
700-1000mg/g
Specific surface area
590-1500m
2
/g
Methylene blue value
100-150mg/g
PH value
8-10
Renowned Coconut shell activated carbon
Coconut shell activated carobon
1.high-quality coconut shell
2.high adsorptive ability
3.durable in use
Coconut shell activated carbon
Coconut shell activated carbon uses high-quality coconut shells as raw
material and it is produced by physical methods and refined management.
The characteristics of it are large specific area, great intensity,
epigranular, developed pore structure and strong adsorption property.
Application:
De-colorization, decontamination and odor elimination of fat, oils, gasoline and diesel oil.
Purification, deodorization, and decontamination of wines, beverages are also widely used.
Purification, refinement and de-colorization of fine chemicals,
pharmaceutical chemicals and biological pharmacy process.
The purification, de-colorization, odor removal and COD reduction filter
of environmental engineering wastewater and sanitary wastewater.
Analysis of physical and chemical properties:
Projects
Test data
Projects
Test data
Particle size
Mixed
Specific gravity
2-2.2g/cm3
Phenol adsorptive rate
Min 450mg/g
Bulk specific weight
0.5-0.65g/cm3
Intensity
Min 80-95%
Total pore volume
0.7-1 cm3/g
Iodine value
700-1000mg/g
Specific surface area
590-1500m2/g
Methylene blue value
100-150mg/g
PH value
8-10
Half-dechlorination value
Max 5cm
Ash content
Max 8-12%
Moisture
Max 3%
Specific heat
-1.00J/g.°C
Note: as manufacturer, customized specifications are available.
1.high-quality coconut shell
2.high adsorptive ability
3.durable in use
Coconut shell activated carbon
Coconut shell activated carbon uses high-quality coconut shells as raw
material and it is produced by physical methods and refined management.
The characteristics of it are large specific area, great intensity,
epigranular, developed pore structure and strong adsorption property.
Application:
De-colorization, decontamination and odor elimination of fat, oils, gasoline and diesel oil.
Purification, deodorization, and decontamination of wines, beverages are also widely used.
Purification, refinement and de-colorization of fine chemicals,
pharmaceutical chemicals and biological pharmacy process.
The purification, de-colorization, odor removal and COD reduction filter
of environmental engineering wastewater and sanitary wastewater.
Analysis of physical and chemical properties:
Projects
Test data
Projects
Test data
Particle size
Mixed
Specific gravity
2-2.2g/cm3
Phenol adsorptive rate
Min 450mg/g
Bulk specific weight
0.5-0.65g/cm3
Intensity
Min 80-95%
Total pore volume
0.7-1 cm3/g
Iodine value
700-1000mg/g
Specific surface area
590-1500m2/g
Methylene blue value
100-150mg/g
PH value
8-10
Half-dechlorination value
Max 5cm
Ash content
Max 8-12%
Moisture
Max 3%
Specific heat
-1.00J/g.°C
Note: as manufacturer, customized specifications are available.
Resine Cloroetileniche Clorurate(CPE Resin)-REACH.SGS,ISO
Chlorinated Polyethene Resin
Resine Cloroetileniche Clorurate
Impacted modifier.
Rubber type
film,waterproof roll material
We ,Weifang Gaoxin Chemical co.,Ltd producing CPE Resin used for Profile, door,window and pvc,ABS Compounds' impacted modifier,and Main mateiral of film, rubber, Waterproof file. and so on.
CPVC Resin used for CPVC Pipe and fittings,Or cpvc compounds, CPVC pipe and fittings.,
HCPE Resin used for adhesive and coatings, instead another kind CPVC Resin. to produce PVC/UPVC adhesive and Coatings ..we have opened large market in the world. who are intersted ,just call me or send e mail to me
By way, talkonline it's ok .
Chlorinated Polyethene Resin (Resine Cloroetileniche Clorurate)
CPE135 A B Resin
Impacted modifier.Rubber type
film,waterproof roll material
Europe REACH
The properties of CPE135A: Chlorinated polyethylene resin
Good anti-ading property and exellent weatherability ,ozone resistance
CPE 135A SPECIFICATIONS
ITEM
UNIT
INDEX
Chlorine content
%
35±1
Thermal decomposition temperature
≥165
Volatile Matter Content
%
≤0.3
Remains Crystallinity
%
≤5
Tearing Strength
Mpa
≥8.0
Rate of filtration(36mesh)
%
≥99
Shore Hardness A
°
≤57
Apparent Density
g/ml
≥0.55
Impurity Particle
Pc/50g
10
Whiteness E457
°
≥86
Uses:
Mainly used for producing PVC profiles, U-PVC waterpipe&sewer pipe, cold curved pipe line, PVC blowing board and PVC extrusion board.
Features:
1) good anti-aging property and excellent weatherability. It could be used under harsh climate and environment, and it is fully resistant to ozone.
2) good anti-combustion, no self ignition
3) good low temperature flexibility. It could remain flexible under-20. It may be used as impact modifier in UPVC product.
4) excellent endurance to chemicals. It is inert to many chemical reagents and corrosion resistant to various acids and alkalis.
5) good processing ability. It is easy to be shaped
6) extremely safe for operation. CPE is harmless to human body and the environment
7) excellent stability
Applicants:
Excellent performance as a result of the above CPE is widely used in PVC plastic profile, sheet, pipe, pipe fittings, waterproof material, wire and cable jacket, seals, PVC plastic such as the extrusion of laminated rubber.
Resine Cloroetileniche Clorurate
Impacted modifier.
Rubber type
film,waterproof roll material
We ,Weifang Gaoxin Chemical co.,Ltd producing CPE Resin used for Profile, door,window and pvc,ABS Compounds' impacted modifier,and Main mateiral of film, rubber, Waterproof file. and so on.
CPVC Resin used for CPVC Pipe and fittings,Or cpvc compounds, CPVC pipe and fittings.,
HCPE Resin used for adhesive and coatings, instead another kind CPVC Resin. to produce PVC/UPVC adhesive and Coatings ..we have opened large market in the world. who are intersted ,just call me or send e mail to me
By way, talkonline it's ok .
Chlorinated Polyethene Resin (Resine Cloroetileniche Clorurate)
CPE135 A B Resin
Impacted modifier.Rubber type
film,waterproof roll material
Europe REACH
The properties of CPE135A: Chlorinated polyethylene resin
Good anti-ading property and exellent weatherability ,ozone resistance
CPE 135A SPECIFICATIONS
ITEM
UNIT
INDEX
Chlorine content
%
35±1
Thermal decomposition temperature
≥165
Volatile Matter Content
%
≤0.3
Remains Crystallinity
%
≤5
Tearing Strength
Mpa
≥8.0
Rate of filtration(36mesh)
%
≥99
Shore Hardness A
°
≤57
Apparent Density
g/ml
≥0.55
Impurity Particle
Pc/50g
10
Whiteness E457
°
≥86
Uses:
Mainly used for producing PVC profiles, U-PVC waterpipe&sewer pipe, cold curved pipe line, PVC blowing board and PVC extrusion board.
Features:
1) good anti-aging property and excellent weatherability. It could be used under harsh climate and environment, and it is fully resistant to ozone.
2) good anti-combustion, no self ignition
3) good low temperature flexibility. It could remain flexible under-20. It may be used as impact modifier in UPVC product.
4) excellent endurance to chemicals. It is inert to many chemical reagents and corrosion resistant to various acids and alkalis.
5) good processing ability. It is easy to be shaped
6) extremely safe for operation. CPE is harmless to human body and the environment
7) excellent stability
Applicants:
Excellent performance as a result of the above CPE is widely used in PVC plastic profile, sheet, pipe, pipe fittings, waterproof material, wire and cable jacket, seals, PVC plastic such as the extrusion of laminated rubber.
Ro chemicals/MP flocculant for drinking water purification
1.ro chemicals for drinking water
2.high quality in competitive price
3.MSDS
4.ISO certificate
5.chemicals prepare is ok
1.water treatment chemicals manufacturer
2.supply you the effective chemicals in low price.
3.first-class quality can match with famous brands.
4.cooling water chemicals,reverse osmosis chemicals,cooling tower chemicals
seawater mollusk biocide ,steam boiler chemicals
2.high quality in competitive price
3.MSDS
4.ISO certificate
5.chemicals prepare is ok
1.water treatment chemicals manufacturer
2.supply you the effective chemicals in low price.
3.first-class quality can match with famous brands.
4.cooling water chemicals,reverse osmosis chemicals,cooling tower chemicals
seawater mollusk biocide ,steam boiler chemicals
Acrylamide 98%
Approved by Ministry of Environment Protection of PRC, and qualified to apply for Clearance Notification for toxic chemicals
Acrylamide Solid
Molecular formula:
CH
2
CHCONH
2
Properties:
White crystals,colorless,toxic proportion:1.122(20/4
)
Melting:
84-85°C
Boiling point:
99-104°C
Method of manufacturing:
Acrylamide solution crystallize,filtrate and dry at low temperatures.
Technical Index
:
ITEM
INDEX
Appearance
White crystal powder
Assay %
98
Inhibitor
0
Conductivity of 40% solvent(us/cm)
8-12
PH of 40% solvent (test paper)
5.5-7.5
Usage:
Its polymer or co-polymer can be used as flocculant,mud conditioner,blocking agent,mineral dressing agent,textile treatment agent,intensifier and water treatment agent.
Package:
25kgs in PE bag lined 3-in-1 composite bag
Shelf life: 12 months.
Cautions:
(1) Its solution is toxic , do not touch with human directly
(2)This product is easy to sublimate,must pay attention to the seal.
Acrylamide Solid
Molecular formula:
CH
2
CHCONH
2
Properties:
White crystals,colorless,toxic proportion:1.122(20/4
)
Melting:
84-85°C
Boiling point:
99-104°C
Method of manufacturing:
Acrylamide solution crystallize,filtrate and dry at low temperatures.
Technical Index
:
ITEM
INDEX
Appearance
White crystal powder
Assay %
98
Inhibitor
0
Conductivity of 40% solvent(us/cm)
8-12
PH of 40% solvent (test paper)
5.5-7.5
Usage:
Its polymer or co-polymer can be used as flocculant,mud conditioner,blocking agent,mineral dressing agent,textile treatment agent,intensifier and water treatment agent.
Package:
25kgs in PE bag lined 3-in-1 composite bag
Shelf life: 12 months.
Cautions:
(1) Its solution is toxic , do not touch with human directly
(2)This product is easy to sublimate,must pay attention to the seal.
Ronica
Anti-foaming agent also can be used as foam inhibitor and anti-static agent.
Tianjin Hero-Land S&T Development Co., Ltd is specialized in producing chemicals for rubber, paper, water treatment, oil, textile and leather. We hope to build business relation with you in long term, and you will not be disappointed with the quality and price.
Antifoaming Agent S-909
1. Brief Product Introduction:
The S-series defoamer, produced by our company, is a kind of nonionic waterless defoamer. Its main component is organic silicon, and making a better effect of antifoaming by working along with reactant esters, ethers, alkanes and other synergistic ingredients. Because of its low moisture content, it is applicable to oil phase and waterless reaction phase. Besides, its ingredients are all inert materials. In general reaction condition, it will not participate in chemical reactions. In addition, the product can also be diluted with water as 1:10~50 for forming short-lived one, which makes a wider range of applications.
2. Performance Index:
Appearance
PH
Moisture
Relative density
Water white to light yellow transparent liquid
5~7 (original solution)
≤
0.5%
0.80-1.00
3. Usage and characteristics:
1. The product can also be diluted with water as 1:10~50 for forming short-lived one, which makes a wider range of applications.
2. The product can dissolve in many organic solvents, and it can be used as defoamer and anti-static agent.
3. Its ingredients are all inert materials. In general reaction condition, it will not participate in chemical reactions.
4. Using method recommended:
1. You can use the original solution directly.
2. It can also be used by mixing with water.
Note: The dilute solution is not very stable. If you use it after diluting, please do not store the dilute solution (better to use it as soon as diluting).
5. Packing and storage:
1. Packing in 180kg/drum.
2. The product is with low-temperature resistance. Under condition of -20°C, it is still semi-transparent flowing liquid. Churning evenly, without affecting the performance.
6. Toxicity and safety:
1. General toxicity, if splashing on skin, please washing with water and soap. But if splashing into eyes, please rinsing with clear water on time, and go to hospital for treatment in an emergency.
2. Containing flammable components, it can not reach to fire. If on fire, please put out fire by using powder fire extinguisher.
Tianjin Hero-Land S&T Development Co., Ltd is specialized in producing chemicals for rubber, paper, water treatment, oil, textile and leather. We hope to build business relation with you in long term, and you will not be disappointed with the quality and price.
Antifoaming Agent S-909
1. Brief Product Introduction:
The S-series defoamer, produced by our company, is a kind of nonionic waterless defoamer. Its main component is organic silicon, and making a better effect of antifoaming by working along with reactant esters, ethers, alkanes and other synergistic ingredients. Because of its low moisture content, it is applicable to oil phase and waterless reaction phase. Besides, its ingredients are all inert materials. In general reaction condition, it will not participate in chemical reactions. In addition, the product can also be diluted with water as 1:10~50 for forming short-lived one, which makes a wider range of applications.
2. Performance Index:
Appearance
PH
Moisture
Relative density
Water white to light yellow transparent liquid
5~7 (original solution)
≤
0.5%
0.80-1.00
3. Usage and characteristics:
1. The product can also be diluted with water as 1:10~50 for forming short-lived one, which makes a wider range of applications.
2. The product can dissolve in many organic solvents, and it can be used as defoamer and anti-static agent.
3. Its ingredients are all inert materials. In general reaction condition, it will not participate in chemical reactions.
4. Using method recommended:
1. You can use the original solution directly.
2. It can also be used by mixing with water.
Note: The dilute solution is not very stable. If you use it after diluting, please do not store the dilute solution (better to use it as soon as diluting).
5. Packing and storage:
1. Packing in 180kg/drum.
2. The product is with low-temperature resistance. Under condition of -20°C, it is still semi-transparent flowing liquid. Churning evenly, without affecting the performance.
6. Toxicity and safety:
1. General toxicity, if splashing on skin, please washing with water and soap. But if splashing into eyes, please rinsing with clear water on time, and go to hospital for treatment in an emergency.
2. Containing flammable components, it can not reach to fire. If on fire, please put out fire by using powder fire extinguisher.
Ronica
This product is soluble in water and ethanol,
2. Emulsifier for natural synthetic rubber and asphalt
Cation Surfactant 1231
1. Brief Product Introduction:
1. This product is soluble in water and ethanol,
2. Emulsifier for natural synthetic rubber and asphalt
3. Fungicide for water flood field.
4. Foaming agent for fire extinction.
2. Performance Index:
Ingredient: Dodecyltrimethylammonium chloride
CAS: 112-00-5
Appearance: water white to pale yellow liquid
Active matter content (%): 30 ± 2
Free amine content (%):
≤
2.0
PH value10%/aqueous solution 6.0~8.0
2. Emulsifier for natural synthetic rubber and asphalt
Cation Surfactant 1231
1. Brief Product Introduction:
1. This product is soluble in water and ethanol,
2. Emulsifier for natural synthetic rubber and asphalt
3. Fungicide for water flood field.
4. Foaming agent for fire extinction.
2. Performance Index:
Ingredient: Dodecyltrimethylammonium chloride
CAS: 112-00-5
Appearance: water white to pale yellow liquid
Active matter content (%): 30 ± 2
Free amine content (%):
≤
2.0
PH value10%/aqueous solution 6.0~8.0
Rubber Accelerator M
1,Being a general type of accelerator.
2,Rapid promoting function for rubber.
3,High quality with competitive price.
Properties:
Light yellow powder or granular, a bitter taste, specific gravity: 1.42-1.52, melting point: ≥170°C,easily soluble in ethyl acetate, acetone, sodium hydroxide and dilute solution of sodium carbonate, soluble in ethanol, insoluble in water and gasoline. Stable in storage.
Product specification:
Item
High Quality
First Grade
Qualified
Appearance (visual)
Light yellow powder
Initial welting point °C≥
173.0
171.0
170.0
Heating loss %≤
0.30
0.40
0.50
Ash %≤
0.30
0.30
0.30
Sieve residue (100um) ≤
0.50
0.50
0.10
2,Rapid promoting function for rubber.
3,High quality with competitive price.
Properties:
Light yellow powder or granular, a bitter taste, specific gravity: 1.42-1.52, melting point: ≥170°C,easily soluble in ethyl acetate, acetone, sodium hydroxide and dilute solution of sodium carbonate, soluble in ethanol, insoluble in water and gasoline. Stable in storage.
Product specification:
Item
High Quality
First Grade
Qualified
Appearance (visual)
Light yellow powder
Initial welting point °C≥
173.0
171.0
170.0
Heating loss %≤
0.30
0.40
0.50
Ash %≤
0.30
0.30
0.30
Sieve residue (100um) ≤
0.50
0.50
0.10
Rubber Accelerator TMTD
1,Being a general type of accelerator.
2,Rapid promoting function for rubber.
3,High quality with competitive price.
Properties:
Light yellow powder or granular, a bitter taste, specific gravity: 1.42-1.52, melting point: ≥170°C,easily soluble in ethyl acetate, acetone, sodium hydroxide and dilute solution of sodium carbonate, soluble in ethanol, insoluble in water and gasoline. Stable in storage.
Product specification:
Item
High Quality
First Grade
Qualified
Appearance (visual)
Light yellow powder
Initial welting point °C≥
173.0
171.0
170.0
Heating loss %≤
0.30
0.40
0.50
Ash %≤
0.30
0.30
0.30
Sieve residue (100um) ≤
0.50
0.50
0.10
2,Rapid promoting function for rubber.
3,High quality with competitive price.
Properties:
Light yellow powder or granular, a bitter taste, specific gravity: 1.42-1.52, melting point: ≥170°C,easily soluble in ethyl acetate, acetone, sodium hydroxide and dilute solution of sodium carbonate, soluble in ethanol, insoluble in water and gasoline. Stable in storage.
Product specification:
Item
High Quality
First Grade
Qualified
Appearance (visual)
Light yellow powder
Initial welting point °C≥
173.0
171.0
170.0
Heating loss %≤
0.30
0.40
0.50
Ash %≤
0.30
0.30
0.30
Sieve residue (100um) ≤
0.50
0.50
0.10
Rubber Accelerator cable chemical
1,Being a general type of accelerator.
2,Rapid promoting function for rubber.
3,High quality with competitive price.
Properties:
Light yellow powder or granular, a bitter taste, specific gravity: 1.42-1.52, melting point: ≥170°C,easily soluble in ethyl acetate, acetone, sodium hydroxide and dilute solution of sodium carbonate, soluble in ethanol, insoluble in water and gasoline. Stable in storage.
Product specification:
Item
High Quality
First Grade
Qualified
Appearance (visual)
Light yellow powder
Initial welting point °C≥
173.0
171.0
170.0
Heating loss %≤
0.30
0.40
0.50
Ash %≤
0.30
0.30
0.30
Sieve residue (100um) ≤
0.50
0.50
0.10
2,Rapid promoting function for rubber.
3,High quality with competitive price.
Properties:
Light yellow powder or granular, a bitter taste, specific gravity: 1.42-1.52, melting point: ≥170°C,easily soluble in ethyl acetate, acetone, sodium hydroxide and dilute solution of sodium carbonate, soluble in ethanol, insoluble in water and gasoline. Stable in storage.
Product specification:
Item
High Quality
First Grade
Qualified
Appearance (visual)
Light yellow powder
Initial welting point °C≥
173.0
171.0
170.0
Heating loss %≤
0.30
0.40
0.50
Ash %≤
0.30
0.30
0.30
Sieve residue (100um) ≤
0.50
0.50
0.10
Rubber Accelerator for electric cable
1,Being a general type of accelerator.
2,Rapid promoting function for rubber.
3,High quality with competitive price.
Properties:
Light yellow powder or granular, a bitter taste, specific gravity: 1.42-1.52, melting point: ≥170°C,easily soluble in ethyl acetate, acetone, sodium hydroxide and dilute solution of sodium carbonate, soluble in ethanol, insoluble in water and gasoline. Stable in storage.
Product specification:
Item
High Quality
First Grade
Qualified
Appearance (visual)
Light yellow powder
Initial welting point °C≥
173.0
171.0
170.0
Heating loss %≤
0.30
0.40
0.50
Ash %≤
0.30
0.30
0.30
Sieve residue (100um) ≤
0.50
0.50
0.10
2,Rapid promoting function for rubber.
3,High quality with competitive price.
Properties:
Light yellow powder or granular, a bitter taste, specific gravity: 1.42-1.52, melting point: ≥170°C,easily soluble in ethyl acetate, acetone, sodium hydroxide and dilute solution of sodium carbonate, soluble in ethanol, insoluble in water and gasoline. Stable in storage.
Product specification:
Item
High Quality
First Grade
Qualified
Appearance (visual)
Light yellow powder
Initial welting point °C≥
173.0
171.0
170.0
Heating loss %≤
0.30
0.40
0.50
Ash %≤
0.30
0.30
0.30
Sieve residue (100um) ≤
0.50
0.50
0.10
Rubber Accelerator rubber chemical
1,Being a general type of accelerator.
2,Rapid promoting function for rubber.
3,High quality with competitive price.
Rubber Accelerators M
Melting Point °C---------------------------------170.0Min
Ash %----------------------------------------------0.30Max
Heating Reduction-----------------------------0.50Max
150 mesh screen residues %--------------0.10Max
Rubber Accelerators D
Melting Point °C---------------------------------144.0Min
Ash %---------------------------------------------0.30Max
Heating Reduction----------------------------0.30Max
150 mesh screen residues %-------------0.10Max
Rubber Accelerators DM
Melting Point °C--------------------------------- 165.0Min
Ash %----------------------------------------------0.50Max
Heating Reduction-----------------------------0.40Max
150 mesh screen residues %--------------0.10Max
2,Rapid promoting function for rubber.
3,High quality with competitive price.
Rubber Accelerators M
Melting Point °C---------------------------------170.0Min
Ash %----------------------------------------------0.30Max
Heating Reduction-----------------------------0.50Max
150 mesh screen residues %--------------0.10Max
Rubber Accelerators D
Melting Point °C---------------------------------144.0Min
Ash %---------------------------------------------0.30Max
Heating Reduction----------------------------0.30Max
150 mesh screen residues %-------------0.10Max
Rubber Accelerators DM
Melting Point °C--------------------------------- 165.0Min
Ash %----------------------------------------------0.50Max
Heating Reduction-----------------------------0.40Max
150 mesh screen residues %--------------0.10Max
Rubber Accelerator tyre chemical
1,Being a general type of accelerator.
2,Rapid promoting function for rubber.
3,High quality with competitive price.
Properties:
Light yellow powder or granular, a bitter taste, specific gravity: 1.42-1.52, melting point: ≥170°C,easily soluble in ethyl acetate, acetone, sodium hydroxide and dilute solution of sodium carbonate, soluble in ethanol, insoluble in water and gasoline. Stable in storage.
Product specification:
Item
High Quality
First Grade
Qualified
Appearance (visual)
Light yellow powder
Initial welting point °C≥
173.0
171.0
170.0
Heating loss %≤
0.30
0.40
0.50
Ash %≤
0.30
0.30
0.30
Sieve residue (100um) ≤
0.50
0.50
0.10
2,Rapid promoting function for rubber.
3,High quality with competitive price.
Properties:
Light yellow powder or granular, a bitter taste, specific gravity: 1.42-1.52, melting point: ≥170°C,easily soluble in ethyl acetate, acetone, sodium hydroxide and dilute solution of sodium carbonate, soluble in ethanol, insoluble in water and gasoline. Stable in storage.
Product specification:
Item
High Quality
First Grade
Qualified
Appearance (visual)
Light yellow powder
Initial welting point °C≥
173.0
171.0
170.0
Heating loss %≤
0.30
0.40
0.50
Ash %≤
0.30
0.30
0.30
Sieve residue (100um) ≤
0.50
0.50
0.10
Rubber Accelerator (M / DM / D / TMTD)
Rubber Accelerator
1.MF: C7H5NS2
2.White;light yellow powder
3.High quality with competitive price
Rubber Accelerator (M / DM / D / TMTD)
For the manufacture of cables, wires, tires and other rubber products
Accelerator for natural rubber and synthetic rubber D medium-speed accelerator, mainly used to produce tires, rubber, shoes and other rubber products
Accelerator for natural rubber and synthetic rubber D medium-speed accelerator, mainly used to produce tires, rubber, shoes and other rubber products
DM accelerator for natural rubber, synthetic rubber, reclaimed rubber general purpose accelerator, mainly used to produce tires, inner tubes, tape, rubber overshoes and general industrial products.
Rubber accelerator is mainly used for manufacture of accelerator tires, inner tubes, tape, rubber shoes and other industrial rubber products accelerator TMTD as natural rubber, synthetic rubber and latex ultra accelerator.
Items
Specification
M
DM
D
TMTD
Melting Point °C
170.0Min
165.0Min
144.0Min
140.0Min
Ash %
0.30Max
0.50Max
0.30Max
0.50Max
Heating Reduction
0.50Max
0.40Max
0.30Max
0.40Max
150 mesh Screen Residues %
0.10Max
0.10Max
0.10Max
0.10Max
1.MF: C7H5NS2
2.White;light yellow powder
3.High quality with competitive price
Rubber Accelerator (M / DM / D / TMTD)
For the manufacture of cables, wires, tires and other rubber products
Accelerator for natural rubber and synthetic rubber D medium-speed accelerator, mainly used to produce tires, rubber, shoes and other rubber products
Accelerator for natural rubber and synthetic rubber D medium-speed accelerator, mainly used to produce tires, rubber, shoes and other rubber products
DM accelerator for natural rubber, synthetic rubber, reclaimed rubber general purpose accelerator, mainly used to produce tires, inner tubes, tape, rubber overshoes and general industrial products.
Rubber accelerator is mainly used for manufacture of accelerator tires, inner tubes, tape, rubber shoes and other industrial rubber products accelerator TMTD as natural rubber, synthetic rubber and latex ultra accelerator.
Items
Specification
M
DM
D
TMTD
Melting Point °C
170.0Min
165.0Min
144.0Min
140.0Min
Ash %
0.30Max
0.50Max
0.30Max
0.50Max
Heating Reduction
0.50Max
0.40Max
0.30Max
0.40Max
150 mesh Screen Residues %
0.10Max
0.10Max
0.10Max
0.10Max
Rubber Accelerator D (DPG)97% 99%
1.Rubber Accelerator D (DPG)
2.Purity:97% 99%
3.CAS:102-06-7
4.ISO9001:2008 Quality.
5.Large manufacturer in China
White to light gray powder. The density is 1.29. S
.
Item
First Grade
Qualified Grade
Appearance(Visual inspection)
white or Light-gray powder
Initial M.P., P
ο
PC ≥
142.0
140.0
Loss on drying % ≤
0.40
0.50
Ash % ≤
0.30
0.40
Residues on (150μm) % ≤
0.10
0.10
Can be used as a single accelerator, as a secondary accelerator or as a sulphur donor in most
sulphur-cured elastomers. Scorchy and gives fast cure rates. Produces an excellent vulcanisation plateau with good
heat aging and compression set resistance in sulphurless and EV cure systems Good color retention is obtained in
non-black vulcanisation. A valuable secondary accelerator
2.Purity:97% 99%
3.CAS:102-06-7
4.ISO9001:2008 Quality.
5.Large manufacturer in China
White to light gray powder. The density is 1.29. S
.
Item
First Grade
Qualified Grade
Appearance(Visual inspection)
white or Light-gray powder
Initial M.P., P
ο
PC ≥
142.0
140.0
Loss on drying % ≤
0.40
0.50
Ash % ≤
0.30
0.40
Residues on (150μm) % ≤
0.10
0.10
Can be used as a single accelerator, as a secondary accelerator or as a sulphur donor in most
sulphur-cured elastomers. Scorchy and gives fast cure rates. Produces an excellent vulcanisation plateau with good
heat aging and compression set resistance in sulphurless and EV cure systems Good color retention is obtained in
non-black vulcanisation. A valuable secondary accelerator
Acrylamide liquid
Chemical Name: Acrylamide
Molecular Formula: C3H5NO
Formula Weight: 71.08
CAS No.: 79-06-1
MOL File: Mol file
Technical Specifications:
Specification of Acrylamide Aqueous Solution
Item
Index
40%
30%
Appearance
Colorless transparent fluid
Colorless transparent fluid
Content (Chemical method)
40
30
Polymerization inhibitor
According to the requirements of customers
According to the requirements of customers
Elextrical conductivity(us/cm)
≤200
30,50
PH
6-7
6-7
Specification of solid Acrylamide :
Item
Index
Appearance
White crystal
Content %
98.0 min
Moisture %
2 max
Polymerization Inhibitor
2 ppm max
Color(10% Aq.Solution)
Colorless Transparent
Conductivity (10% solution,us/cm)
20 max
Molecular Formula: C3H5NO
Formula Weight: 71.08
CAS No.: 79-06-1
MOL File: Mol file
Technical Specifications:
Specification of Acrylamide Aqueous Solution
Item
Index
40%
30%
Appearance
Colorless transparent fluid
Colorless transparent fluid
Content (Chemical method)
40
30
Polymerization inhibitor
According to the requirements of customers
According to the requirements of customers
Elextrical conductivity(us/cm)
≤200
30,50
PH
6-7
6-7
Specification of solid Acrylamide :
Item
Index
Appearance
White crystal
Content %
98.0 min
Moisture %
2 max
Polymerization Inhibitor
2 ppm max
Color(10% Aq.Solution)
Colorless Transparent
Conductivity (10% solution,us/cm)
20 max
Rubber Accelerator M
1,Being a general type of accelerator.
2,Rapid promoting function for rubber.
3,High quality with competitive price.
White to light gray powder. The density is 1.29. S
.
Item
First Grade
Qualified Grade
Appearance(Visual inspection)
white or Light-gray powder
Initial M.P., P
ο
PC ≥
142.0
140.0
Loss on drying % ≤
0.40
0.50
Ash % ≤
0.30
0.40
Residues on (150μm) % ≤
0.10
0.10
Can be used as a single accelerator, as a secondary accelerator or as a sulphur donor in most
sulphur-cured elastomers. Scorchy and gives fast cure rates. Produces an excellent vulcanisation plateau with good
heat aging and compression set resistance in sulphurless and EV cure systems Good color retention is obtained in
non-black vulcanisation. A valuable secondary accelerator
2,Rapid promoting function for rubber.
3,High quality with competitive price.
White to light gray powder. The density is 1.29. S
.
Item
First Grade
Qualified Grade
Appearance(Visual inspection)
white or Light-gray powder
Initial M.P., P
ο
PC ≥
142.0
140.0
Loss on drying % ≤
0.40
0.50
Ash % ≤
0.30
0.40
Residues on (150μm) % ≤
0.10
0.10
Can be used as a single accelerator, as a secondary accelerator or as a sulphur donor in most
sulphur-cured elastomers. Scorchy and gives fast cure rates. Produces an excellent vulcanisation plateau with good
heat aging and compression set resistance in sulphurless and EV cure systems Good color retention is obtained in
non-black vulcanisation. A valuable secondary accelerator
Rubber Accelerator M
1,Being a general type of accelerator.
2,Rapid promoting function for rubber.
3,High quality with competitive price.
Properties:
Light yellow powder or granular, a bitter taste, specific gravity: 1.42-1.52, melting point: ≥170°C,easily soluble in ethyl acetate, acetone, sodium hydroxide and dilute solution of sodium carbonate, soluble in ethanol, insoluble in water and gasoline. Stable in storage.
Product specification:
Item
High Quality
First Grade
Qualified
Appearance (visual)
Light yellow powder
Initial welting point °C≥
173.0
171.0
170.0
Heating loss %≤
0.30
0.40
0.50
Ash %≤
0.30
0.30
0.30
Sieve residue (100um) ≤
0.50
0.50
0.10
Application:
Being a general type of accelerator. This product has rapid promoting function for natural rubber and common valcanized rubber.
It has a wide vulcanization range, can be used alone or together with other accelerators, easily decomposed in rubber and does not pollute. Mainly used for production of tires, rubber shoes and other rubber industry products.
Package and Storage:
The outer is a woven bag, the inner is a plasti
2,Rapid promoting function for rubber.
3,High quality with competitive price.
Properties:
Light yellow powder or granular, a bitter taste, specific gravity: 1.42-1.52, melting point: ≥170°C,easily soluble in ethyl acetate, acetone, sodium hydroxide and dilute solution of sodium carbonate, soluble in ethanol, insoluble in water and gasoline. Stable in storage.
Product specification:
Item
High Quality
First Grade
Qualified
Appearance (visual)
Light yellow powder
Initial welting point °C≥
173.0
171.0
170.0
Heating loss %≤
0.30
0.40
0.50
Ash %≤
0.30
0.30
0.30
Sieve residue (100um) ≤
0.50
0.50
0.10
Application:
Being a general type of accelerator. This product has rapid promoting function for natural rubber and common valcanized rubber.
It has a wide vulcanization range, can be used alone or together with other accelerators, easily decomposed in rubber and does not pollute. Mainly used for production of tires, rubber shoes and other rubber industry products.
Package and Storage:
The outer is a woven bag, the inner is a plasti
Rubber Accelerator TMTD
1,Being a general type of accelerator.
2,Rapid promoting function for rubber.
3,High quality with competitive price.
White to light gray powder. The density is 1.29. S
.
Item
First Grade
Qualified Grade
Appearance(Visual inspection)
white or Light-gray powder
Initial M.P., P
ο
PC ≥
142.0
140.0
Loss on drying % ≤
0.40
0.50
Ash % ≤
0.30
0.40
Residues on (150μm) % ≤
0.10
0.10
Can be used as a single accelerator, as a secondary accelerator or as a sulphur donor in most
sulphur-cured elastomers. Scorchy and gives fast cure rates. Produces an excellent vulcanisation plateau with good
heat aging and compression set resistance in sulphurless and EV cure systems Good color retention is obtained in
non-black vulcanisation. A valuable secondary accelerator
2,Rapid promoting function for rubber.
3,High quality with competitive price.
White to light gray powder. The density is 1.29. S
.
Item
First Grade
Qualified Grade
Appearance(Visual inspection)
white or Light-gray powder
Initial M.P., P
ο
PC ≥
142.0
140.0
Loss on drying % ≤
0.40
0.50
Ash % ≤
0.30
0.40
Residues on (150μm) % ≤
0.10
0.10
Can be used as a single accelerator, as a secondary accelerator or as a sulphur donor in most
sulphur-cured elastomers. Scorchy and gives fast cure rates. Produces an excellent vulcanisation plateau with good
heat aging and compression set resistance in sulphurless and EV cure systems Good color retention is obtained in
non-black vulcanisation. A valuable secondary accelerator
Rubber Accelerator ZDTP-1
1,Being a general type of accelerator.
2,Rapid promoting function for rubber.
3,High quality with competitive price.
White to light gray powder. The density is 1.29. S
.
Item
First Grade
Qualified Grade
Appearance(Visual inspection)
white or Light-gray powder
Initial M.P., P
ο
PC ≥
142.0
140.0
Loss on drying % ≤
0.40
0.50
Ash % ≤
0.30
0.40
Residues on (150μm) % ≤
0.10
0.10
Can be used as a single accelerator, as a secondary accelerator or as a sulphur donor in most
sulphur-cured elastomers. Scorchy and gives fast cure rates. Produces an excellent vulcanisation plateau with good
heat aging and compression set resistance in sulphurless and EV cure systems Good color retention is obtained in
non-black vulcanisation. A valuable secondary accelerator
2,Rapid promoting function for rubber.
3,High quality with competitive price.
White to light gray powder. The density is 1.29. S
.
Item
First Grade
Qualified Grade
Appearance(Visual inspection)
white or Light-gray powder
Initial M.P., P
ο
PC ≥
142.0
140.0
Loss on drying % ≤
0.40
0.50
Ash % ≤
0.30
0.40
Residues on (150μm) % ≤
0.10
0.10
Can be used as a single accelerator, as a secondary accelerator or as a sulphur donor in most
sulphur-cured elastomers. Scorchy and gives fast cure rates. Produces an excellent vulcanisation plateau with good
heat aging and compression set resistance in sulphurless and EV cure systems Good color retention is obtained in
non-black vulcanisation. A valuable secondary accelerator
Friday, August 5, 2011
Rubber Accelerator chemical
1,Being a general type of accelerator.
2,Rapid promoting function for rubber.
3,High quality with competitive price.
Rubber Accelerators M
Melting Point °C---------------------------------170.0Min
Ash %----------------------------------------------0.30Max
Heating Reduction-----------------------------0.50Max
150 mesh screen residues %--------------0.10Max
Rubber Accelerators D
Melting Point °C---------------------------------144.0Min
Ash %---------------------------------------------0.30Max
Heating Reduction----------------------------0.30Max
150 mesh screen residues %-------------0.10Max
Rubber Accelerators DM
Melting Point °C--------------------------------- 165.0Min
Ash %----------------------------------------------0.50Max
Heating Reduction-----------------------------0.40Max
150 mesh screen residues %--------------0.10Max
2,Rapid promoting function for rubber.
3,High quality with competitive price.
Rubber Accelerators M
Melting Point °C---------------------------------170.0Min
Ash %----------------------------------------------0.30Max
Heating Reduction-----------------------------0.50Max
150 mesh screen residues %--------------0.10Max
Rubber Accelerators D
Melting Point °C---------------------------------144.0Min
Ash %---------------------------------------------0.30Max
Heating Reduction----------------------------0.30Max
150 mesh screen residues %-------------0.10Max
Rubber Accelerators DM
Melting Point °C--------------------------------- 165.0Min
Ash %----------------------------------------------0.50Max
Heating Reduction-----------------------------0.40Max
150 mesh screen residues %--------------0.10Max
Rubber Accelerator for rubber
1,Being a general type of accelerator.
2,Rapid promoting function for rubber.
3,High quality with competitive price.
Rubber Accelerators M
Melting Point °C---------------------------------170.0Min
Ash %----------------------------------------------0.30Max
Heating Reduction-----------------------------0.50Max
150 mesh screen residues %--------------0.10Max
Rubber Accelerators D
Melting Point °C---------------------------------144.0Min
Ash %---------------------------------------------0.30Max
Heating Reduction----------------------------0.30Max
150 mesh screen residues %-------------0.10Max
Rubber Accelerators DM
Melting Point °C--------------------------------- 165.0Min
Ash %----------------------------------------------0.50Max
Heating Reduction-----------------------------0.40Max
150 mesh screen residues %--------------0.10Max
2,Rapid promoting function for rubber.
3,High quality with competitive price.
Rubber Accelerators M
Melting Point °C---------------------------------170.0Min
Ash %----------------------------------------------0.30Max
Heating Reduction-----------------------------0.50Max
150 mesh screen residues %--------------0.10Max
Rubber Accelerators D
Melting Point °C---------------------------------144.0Min
Ash %---------------------------------------------0.30Max
Heating Reduction----------------------------0.30Max
150 mesh screen residues %-------------0.10Max
Rubber Accelerators DM
Melting Point °C--------------------------------- 165.0Min
Ash %----------------------------------------------0.50Max
Heating Reduction-----------------------------0.40Max
150 mesh screen residues %--------------0.10Max
Rubber Accelerator for tyre
1,Being a general type of accelerator.
2,Rapid promoting function for rubber.
3,High quality with competitive price.
Rubber Accelerators M
Melting Point °C---------------------------------170.0Min
Ash %----------------------------------------------0.30Max
Heating Reduction-----------------------------0.50Max
150 mesh screen residues %--------------0.10Max
Rubber Accelerators D
Melting Point °C---------------------------------144.0Min
Ash %---------------------------------------------0.30Max
Heating Reduction----------------------------0.30Max
150 mesh screen residues %-------------0.10Max
Rubber Accelerators DM
Melting Point °C--------------------------------- 165.0Min
Ash %----------------------------------------------0.50Max
Heating Reduction-----------------------------0.40Max
150 mesh screen residues %--------------0.10Max
2,Rapid promoting function for rubber.
3,High quality with competitive price.
Rubber Accelerators M
Melting Point °C---------------------------------170.0Min
Ash %----------------------------------------------0.30Max
Heating Reduction-----------------------------0.50Max
150 mesh screen residues %--------------0.10Max
Rubber Accelerators D
Melting Point °C---------------------------------144.0Min
Ash %---------------------------------------------0.30Max
Heating Reduction----------------------------0.30Max
150 mesh screen residues %-------------0.10Max
Rubber Accelerators DM
Melting Point °C--------------------------------- 165.0Min
Ash %----------------------------------------------0.50Max
Heating Reduction-----------------------------0.40Max
150 mesh screen residues %--------------0.10Max
Rubber Accelerator
Rubber accelerator
1)All varieties( M,DM,D,TMTD)
2)Low price
3)Fast delivery
4)Good reputation
Specifications:
Rubber accelerator
1)All varieties( M,DM,D,TMTD)
2)Low price
3)Fast delivery
4)Good reputation
Rubber Accelerator
Professional supplier for accelerators M,DM,CZ,NS,MBS,TT, DZ
Creating value for customers
Rubber accelerator
Thiazoles
MBT(M)
MBTS(DM)
ZMBT(MZ)
DBM(DNBT)
Sulphenamides
CBS(CZ)
TBBS(NS)
NOBS(MBS,MOR)
DCBS(DZ)
Guanidines
DPG(D)
DOTG
Thiurams
TMTD(TT)
TETD
TMTM(TS)
DPTT(TRA)
Dithiocarbamates
ZDMC(PZ)
ZDBC(BZ)
ZDEC(ZDC)
ZEPC(PX)
ZBEC(DBZ)
Thioureas
ETU(NA-22)
DETU
CA
1)All varieties( M,DM,D,TMTD)
2)Low price
3)Fast delivery
4)Good reputation
Specifications:
Rubber accelerator
1)All varieties( M,DM,D,TMTD)
2)Low price
3)Fast delivery
4)Good reputation
Rubber Accelerator
Professional supplier for accelerators M,DM,CZ,NS,MBS,TT, DZ
Creating value for customers
Rubber accelerator
Thiazoles
MBT(M)
MBTS(DM)
ZMBT(MZ)
DBM(DNBT)
Sulphenamides
CBS(CZ)
TBBS(NS)
NOBS(MBS,MOR)
DCBS(DZ)
Guanidines
DPG(D)
DOTG
Thiurams
TMTD(TT)
TETD
TMTM(TS)
DPTT(TRA)
Dithiocarbamates
ZDMC(PZ)
ZDBC(BZ)
ZDEC(ZDC)
ZEPC(PX)
ZBEC(DBZ)
Thioureas
ETU(NA-22)
DETU
CA
Rubber Antioxidant rubber chemical
1,Being a general type of accelerator.
2,Rapid promoting function for rubber.
3,High quality with competitive price.
Rubber Antioxidant4010NA
Item
Specifications
Appearance
White to dark purple brown pastilles
Assay (%)Min
95
Initial Melting Point ()Min.
70
Heat Loss (%)Max.
0.3
Ash (%)Max.
0.2
2,Rapid promoting function for rubber.
3,High quality with competitive price.
Rubber Antioxidant4010NA
Item
Specifications
Appearance
White to dark purple brown pastilles
Assay (%)Min
95
Initial Melting Point ()Min.
70
Heat Loss (%)Max.
0.3
Ash (%)Max.
0.2
Rubber Antioxidant 2246
Rubber Antioxidant
2246
Trade with Trust, Sincerity & Honesty
Creating value for customers.
Rubber Antioxidant 2246
CAS No.:119-47-1
Items
Standard
Initial Melting Point min
124
Heating Loss % max
0.3
Ash % max
0.1
Dalian Richon Chem Co.,
Ltd. Established in 1990, has become one of the Chinese leading suppliers in international market.
With superior standards, an outstanding supply capability, and complete service, Richon will enable its customers to be the most competitive in their market place. Richon's wish is to be your reliable source partner in China.
The activities of our company have expanded significantly over the past years to a point where Richon's products are sold regularly to its partner all over the world - East & Southeast Asia, European Union, North America and South America. We not only supply consistent high quality products but also use our special packing which are praised and approved by many of our customers for its deliberate appearance and durable using. With so long exporting experience and abundant technical skills, we can assure you of follow-up service and after-sales technical support.
Based on our management philosophy, "Creating Value for the customers", we would like to provide our customers by high quality products and satisfied services. We hope to find more chances to cooperate with local and international partners.
2246
Trade with Trust, Sincerity & Honesty
Creating value for customers.
Rubber Antioxidant 2246
CAS No.:119-47-1
Items
Standard
Initial Melting Point min
124
Heating Loss % max
0.3
Ash % max
0.1
Dalian Richon Chem Co.,
Ltd. Established in 1990, has become one of the Chinese leading suppliers in international market.
With superior standards, an outstanding supply capability, and complete service, Richon will enable its customers to be the most competitive in their market place. Richon's wish is to be your reliable source partner in China.
The activities of our company have expanded significantly over the past years to a point where Richon's products are sold regularly to its partner all over the world - East & Southeast Asia, European Union, North America and South America. We not only supply consistent high quality products but also use our special packing which are praised and approved by many of our customers for its deliberate appearance and durable using. With so long exporting experience and abundant technical skills, we can assure you of follow-up service and after-sales technical support.
Based on our management philosophy, "Creating Value for the customers", we would like to provide our customers by high quality products and satisfied services. We hope to find more chances to cooperate with local and international partners.
Acrylic Acid-2-Acrylamido-2-Methylpropane Sulfonic Acid Copolymer (AA/AMPS) water treatment chemical copolymer
AA/AMPS water treatment chemical
1.ISO 9001:2000
2.Manufacture since 1988
3.Solid content %30 min
AA/AMPS water treatment chemical
CAS No. 40623-75-4
Properties:
AA/AMPS is the copolymer of acrylic acid and 2-acrylanmido-2-methylpropanesulfonic acid (AMPS). Due to including carboxylic group (scale inhibition and dispersion) and sulfonic acid group (strong polarity) in this copolymer, AA/AMPS has high calcium tolerance and good scale inhibition for calcium phosphate, calcium carbonate and zinc scale. When built with organophosphines, the synergic effect is obvious. AA/AMPS is suitable to be used in water quality of high pH and high alkaline, it is one of the ideal scale inhibitor and dispersant on high concentration index.
Specification:
items
index
Appearance
Colorless or light yellow clear liquid
Solid content %
40 min
Free monomer (as AA)%
0.8 max
Density (20°C)g/cm
3
1.15 min
pH(1% solution)
3.5-4.5
Viscosity mpa.s
90-200
Usage:
AA/AMPS can be used as scale inhibitor and dispersant in open circulating cool water system, oilfield refill water system, metallurgy system and iron & steel plants to prevent sediment of ferric oxide. When built with organophosphorines and zinc salt, the suitable pH value is 7.0~9.5.AA/AMPS can also be used as dyeing auxiliaries for textile.
Package and Storage:
Normally In 250kg net Plastic Drum, IBC drum can also be used as required.Storage for ten months in room shady and dry place.
1.ISO 9001:2000
2.Manufacture since 1988
3.Solid content %30 min
AA/AMPS water treatment chemical
CAS No. 40623-75-4
Properties:
AA/AMPS is the copolymer of acrylic acid and 2-acrylanmido-2-methylpropanesulfonic acid (AMPS). Due to including carboxylic group (scale inhibition and dispersion) and sulfonic acid group (strong polarity) in this copolymer, AA/AMPS has high calcium tolerance and good scale inhibition for calcium phosphate, calcium carbonate and zinc scale. When built with organophosphines, the synergic effect is obvious. AA/AMPS is suitable to be used in water quality of high pH and high alkaline, it is one of the ideal scale inhibitor and dispersant on high concentration index.
Specification:
items
index
Appearance
Colorless or light yellow clear liquid
Solid content %
40 min
Free monomer (as AA)%
0.8 max
Density (20°C)g/cm
3
1.15 min
pH(1% solution)
3.5-4.5
Viscosity mpa.s
90-200
Usage:
AA/AMPS can be used as scale inhibitor and dispersant in open circulating cool water system, oilfield refill water system, metallurgy system and iron & steel plants to prevent sediment of ferric oxide. When built with organophosphorines and zinc salt, the suitable pH value is 7.0~9.5.AA/AMPS can also be used as dyeing auxiliaries for textile.
Package and Storage:
Normally In 250kg net Plastic Drum, IBC drum can also be used as required.Storage for ten months in room shady and dry place.
Rubber Antioxidant 4020
Rubber antioxidant 4020
Melting point, min: 44C
Assay Value 95%min
Heating loss 0.5% max
Ash content 0.3% max
RUBBER ANTIOXIDANT
4020
Common chemical name. N- (1,3-dimethyl-butyl)-N’-phenyl-p- phenylenediamine
Execute standard
.HG/T3644-1999
Structure formula
.
CAS
.793-24-8
Quality specification.
Assay Value.95%min;
Appearance. purple-brown granule;
Melting point.44.0 min
Heating loss.0.5% max
Ash content.0.3% max
Main identity and appl
ication
— Atioxidant 4020 applied including charge tyre parts,solid tyre,conveyer belt,glue pipe,cable,automobile cushion bracket,rubber slipknot and currency rubber industry produce, these products are in persist and intermittence state which need to defend for ozone. It can be used to make tyre, adhisive tape and common industry products. And it is mainly used in meridian tyre .
— Rubber antioxidant 4020(6PPD) has got an excellent property of protection against fatigue and flexible cracking. Widely used in all sorts of rubber products and tyre especially the meridian tyre.
— It has got an excellent property of protection against fatigue and flexible cracking.
— May be tinted for identification. Soluble in benzene, chloroform , carbon disulfide , acetone , ethyl alcohol. Insoluble in water.
Composition data
The quantity to be used is generally between 0.5 and 1.5 PHR (per hundred rubber ). And not more than 3 PHR (per hundred rubber).
typical use data
Fetus wall
Brass steel-wire curtain cloth glue
NR/SBR conveyance glue
NR/SBR V type trigon tape
Nr motor arm
4020(6PPD)
2-4
2
1-2
2
1-2
RD
1-2
-
1
-
0-1
Repel ozone paraffin
1-3
-
-
-
-
Packing and storage
Packed in kraft paper bag lined with PP woven 25kg per bag with plastic bag inside and storage in cool and dry conditions. The temperature of warehouse to be lowed 35C. Net weight: 25kg/ bag or at buy's request.. Not very easy for storage. Shift life- one year. Container transport with pallets and avoid rough handling and raining delivery.
Melting point, min: 44C
Assay Value 95%min
Heating loss 0.5% max
Ash content 0.3% max
RUBBER ANTIOXIDANT
4020
Common chemical name. N- (1,3-dimethyl-butyl)-N’-phenyl-p- phenylenediamine
Execute standard
.HG/T3644-1999
Structure formula
.
CAS
.793-24-8
Quality specification.
Assay Value.95%min;
Appearance. purple-brown granule;
Melting point.44.0 min
Heating loss.0.5% max
Ash content.0.3% max
Main identity and appl
ication
— Atioxidant 4020 applied including charge tyre parts,solid tyre,conveyer belt,glue pipe,cable,automobile cushion bracket,rubber slipknot and currency rubber industry produce, these products are in persist and intermittence state which need to defend for ozone. It can be used to make tyre, adhisive tape and common industry products. And it is mainly used in meridian tyre .
— Rubber antioxidant 4020(6PPD) has got an excellent property of protection against fatigue and flexible cracking. Widely used in all sorts of rubber products and tyre especially the meridian tyre.
— It has got an excellent property of protection against fatigue and flexible cracking.
— May be tinted for identification. Soluble in benzene, chloroform , carbon disulfide , acetone , ethyl alcohol. Insoluble in water.
Composition data
The quantity to be used is generally between 0.5 and 1.5 PHR (per hundred rubber ). And not more than 3 PHR (per hundred rubber).
typical use data
Fetus wall
Brass steel-wire curtain cloth glue
NR/SBR conveyance glue
NR/SBR V type trigon tape
Nr motor arm
4020(6PPD)
2-4
2
1-2
2
1-2
RD
1-2
-
1
-
0-1
Repel ozone paraffin
1-3
-
-
-
-
Packing and storage
Packed in kraft paper bag lined with PP woven 25kg per bag with plastic bag inside and storage in cool and dry conditions. The temperature of warehouse to be lowed 35C. Net weight: 25kg/ bag or at buy's request.. Not very easy for storage. Shift life- one year. Container transport with pallets and avoid rough handling and raining delivery.
Rubber Antioxidant 6PPD(4020)
1,Manufacturer experienced,Stable,environmental
2,ISO9001,ISO14001
3,REACH pre-register
4,Powder,Granular,Masterbatch
has been in Rubber and Plastic Field for
over 10 years
. We knows the supply Situation in China and the overseas customers' need clearly and exactly.
With the sole agent agreement for certain overseas market with the
top manufacturers in China
, NURCHEM can supply the High Quality products on Competitive Prices, Stable Supply and
On-Time Delivery
.
====================================================================================
Rubber Antioxidant 6PPD(4020)
CHEMICAL
NAME
N(1,3-Dimthylbutyl)-N-Phenyl-P-Phenylenediamine
Excellent for dynamic and intermittent ozone resistance; SBR stabilizer; monomer polymerization inhibitor. Provides flex fatigue and oxidation resistance even at low concentrations.
PRODUCT SPECIFICATIONS
Appearance:
Pastilles
Purity (GC)
(%) min.
96.0
Melting Point
(°C) min.
45.0
Solidifying Point
(°C) min.
45.5
Heating Loss
(%) max.
0.50
Ash
(%) max.
0.15
TYPICAL PROPERTIES
Density at 20
o
C
Kg/m
3
986-1000
PACKAGING:
Bag:
20kg
Or other kind of package clients need
====================================================================================
has been in Rubber and Plastic Field for
over 10 years
. We knows the supply Situation in China and the overseas customers' need clearly and exactly.
With the sole agent agreement for certain overseas market with the
top manufacturers in China
, NURCHEM can supply the High Quality products on Competitive Prices, Stable Supply and
On-Time Delivery
.
====================================================================================
Rubber Antioxidant 6PPD(4020)
CHEMICAL
NAME
N(1,3-Dimthylbutyl)-N-Phenyl-P-Phenylenediamine
Excellent for dynamic and intermittent ozone resistance; SBR stabilizer; monomer polymerization inhibitor. Provides flex fatigue and oxidation resistance even at low concentrations.
PRODUCT SPECIFICATIONS
Appearance:
Pastilles
Purity (GC)
(%) min.
96.0
Melting Point
(°C) min.
45.0
Solidifying Point
(°C) min.
45.5
Heating Loss
(%) max.
0.50
Ash
(%) max.
0.15
TYPICAL PROPERTIES
Density at 20
o
C
Kg/m
3
986-1000
PACKAGING:
Bag:
20kg
Or other kind of package clients need
====================================================================================
2,ISO9001,ISO14001
3,REACH pre-register
4,Powder,Granular,Masterbatch
has been in Rubber and Plastic Field for
over 10 years
. We knows the supply Situation in China and the overseas customers' need clearly and exactly.
With the sole agent agreement for certain overseas market with the
top manufacturers in China
, NURCHEM can supply the High Quality products on Competitive Prices, Stable Supply and
On-Time Delivery
.
====================================================================================
Rubber Antioxidant 6PPD(4020)
CHEMICAL
NAME
N(1,3-Dimthylbutyl)-N-Phenyl-P-Phenylenediamine
Excellent for dynamic and intermittent ozone resistance; SBR stabilizer; monomer polymerization inhibitor. Provides flex fatigue and oxidation resistance even at low concentrations.
PRODUCT SPECIFICATIONS
Appearance:
Pastilles
Purity (GC)
(%) min.
96.0
Melting Point
(°C) min.
45.0
Solidifying Point
(°C) min.
45.5
Heating Loss
(%) max.
0.50
Ash
(%) max.
0.15
TYPICAL PROPERTIES
Density at 20
o
C
Kg/m
3
986-1000
PACKAGING:
Bag:
20kg
Or other kind of package clients need
====================================================================================
has been in Rubber and Plastic Field for
over 10 years
. We knows the supply Situation in China and the overseas customers' need clearly and exactly.
With the sole agent agreement for certain overseas market with the
top manufacturers in China
, NURCHEM can supply the High Quality products on Competitive Prices, Stable Supply and
On-Time Delivery
.
====================================================================================
Rubber Antioxidant 6PPD(4020)
CHEMICAL
NAME
N(1,3-Dimthylbutyl)-N-Phenyl-P-Phenylenediamine
Excellent for dynamic and intermittent ozone resistance; SBR stabilizer; monomer polymerization inhibitor. Provides flex fatigue and oxidation resistance even at low concentrations.
PRODUCT SPECIFICATIONS
Appearance:
Pastilles
Purity (GC)
(%) min.
96.0
Melting Point
(°C) min.
45.0
Solidifying Point
(°C) min.
45.5
Heating Loss
(%) max.
0.50
Ash
(%) max.
0.15
TYPICAL PROPERTIES
Density at 20
o
C
Kg/m
3
986-1000
PACKAGING:
Bag:
20kg
Or other kind of package clients need
====================================================================================
Rubber Antioxidant A
Antioxidant RD(TMQ,TDQ,TQ)
Chemical Composition2,2,4-trimethy1-1,2-dihydroquinoline
Antioxidant RD(TMQ,TDQ,TQ)
Chemical Composition2,2,4-trimethy1-1,2-dihydroquinoline
Product Data
Chemical name: 2,2,4-trimethyl-1,2-dihydroquinoline content
Specification:
Item
Specification
Appearance
Amber to browns flake or granular
Initial M.P. (Min)
80-100
Loss on drying (Max) %
0.30
Ash (Max) %
0.30
Properties: This product in brown piece of amber, poisonless, Soluble in benzene, chloroform, carbon disulfide and acetone, but not soluble in water. Its toxicity is light, pollution is low, fine solution with rubber. This product is combustible, when storing and transporting, always pay attention to fireproof and dampproof
Application:The product is particular excellent kinds of general-purpose ammonia anti-ageing agent. It particular suit to full-steel, semi-steel radial ply tire and it apply to many kinds of the tires, rubber tube, gummed tape, rubber overshoes and general industrial rubber products and also suits to emulsion products.
Package &storage:
25kg paper bag in lined with plastic bag. It should be stored in a cool well-ventilated area.
Storage:
Chemical Composition2,2,4-trimethy1-1,2-dihydroquinoline
Antioxidant RD(TMQ,TDQ,TQ)
Chemical Composition2,2,4-trimethy1-1,2-dihydroquinoline
Product Data
Chemical name: 2,2,4-trimethyl-1,2-dihydroquinoline content
Specification:
Item
Specification
Appearance
Amber to browns flake or granular
Initial M.P. (Min)
80-100
Loss on drying (Max) %
0.30
Ash (Max) %
0.30
Properties: This product in brown piece of amber, poisonless, Soluble in benzene, chloroform, carbon disulfide and acetone, but not soluble in water. Its toxicity is light, pollution is low, fine solution with rubber. This product is combustible, when storing and transporting, always pay attention to fireproof and dampproof
Application:The product is particular excellent kinds of general-purpose ammonia anti-ageing agent. It particular suit to full-steel, semi-steel radial ply tire and it apply to many kinds of the tires, rubber tube, gummed tape, rubber overshoes and general industrial rubber products and also suits to emulsion products.
Package &storage:
25kg paper bag in lined with plastic bag. It should be stored in a cool well-ventilated area.
Storage:
Rubber Antioxidant MB
1,Manufacturer experienced,Stable,environmental
2,ISO9001,ISO14001
3,REACH pre-register
4,Powder,Granular,Masterbatch
Rubber Antioxidant MB
Chemical Name:
2- Mercaptobenzimidazole
Molecular Structure:
Molecular Formula:
C
7
H
6
N
2
S
Molecular Weight:
150.2
CAS#:
583-39-1
Specifications:
Item
Specifications
Power
Dust suppressed power
Granules
Appearance
Light-yellow or white Power crystals (Granules)
Initial Melting Point , °C Min.
285.0
285.0
285.0
Heat Loss, % Max.
0.50
0.50
0.50
Ash, % Max.
0.50
0.50
0.50
Residue on 150 µm Sieve, % Max.
0.10
0.10
-
Addtitive, %
-
1.0 - 2.0
0.5 - 1.5
Properties
Light-yellow or white Power crystals, bitterness, relative density is 1.42 ± 0.02g/cm
3
, soluble in alcohol, acetone and ethyl acetate, difficully soluble in gasoline petrol and dichloromethane, insoluble in carbon tetrachloride, benzene and water, non-toxic.
Applications:
Antioxidant MB can effectively protect the pollution of copper and deal with the bad effect of over-vulcanization. It has an acation of delay to the accelerator M, DM, TMTD, etc. There are better actions when it is used with antioxident . Change less in color, it can be used in wire, cable and transparent or color rubber products and it also can be used as heat stabilizer of polyethylene and polypropylene.
Storage:
Store closed containers in a cool, dry, well-ventilated area. Avoid exposure to direct sunlight.
Packing:
Coextruded paper bags lined with polyethylene film bags. Net weight 25 kg per bag.
2,ISO9001,ISO14001
3,REACH pre-register
4,Powder,Granular,Masterbatch
Rubber Antioxidant MB
Chemical Name:
2- Mercaptobenzimidazole
Molecular Structure:
Molecular Formula:
C
7
H
6
N
2
S
Molecular Weight:
150.2
CAS#:
583-39-1
Specifications:
Item
Specifications
Power
Dust suppressed power
Granules
Appearance
Light-yellow or white Power crystals (Granules)
Initial Melting Point , °C Min.
285.0
285.0
285.0
Heat Loss, % Max.
0.50
0.50
0.50
Ash, % Max.
0.50
0.50
0.50
Residue on 150 µm Sieve, % Max.
0.10
0.10
-
Addtitive, %
-
1.0 - 2.0
0.5 - 1.5
Properties
Light-yellow or white Power crystals, bitterness, relative density is 1.42 ± 0.02g/cm
3
, soluble in alcohol, acetone and ethyl acetate, difficully soluble in gasoline petrol and dichloromethane, insoluble in carbon tetrachloride, benzene and water, non-toxic.
Applications:
Antioxidant MB can effectively protect the pollution of copper and deal with the bad effect of over-vulcanization. It has an acation of delay to the accelerator M, DM, TMTD, etc. There are better actions when it is used with antioxident . Change less in color, it can be used in wire, cable and transparent or color rubber products and it also can be used as heat stabilizer of polyethylene and polypropylene.
Storage:
Store closed containers in a cool, dry, well-ventilated area. Avoid exposure to direct sunlight.
Packing:
Coextruded paper bags lined with polyethylene film bags. Net weight 25 kg per bag.
Rubber Antioxidant TMQ(TQ)
ANTIOXIDANT TMQ(RD)
Apperance:Amber to browns flake or granular
CAS:26780-96-1
Packing:25kg paper bag
ANTIOXIDANT TMQ(RD)
Chemical Composition: 2,2,4-trimethy1-1,2-dihydroquinoline
Product Data:
Chemical name: 2,2,4-trimethyl-1,2-dihydroquinoline content
Specification:
Item
Specification
Appearance
Amber to browns flake or granular
Initial M.P. (Min)
80-100
Loss on drying (Max) %
0.30
Ash (Max) %
0.30
Properties:
This product in brown piece of amber, poisonless, Soluble in benzene, chloroform, carbon disulfide and acetone, but not soluble in water. Its toxicity is light, pollution is low, fine solution with rubber. This product is combustible, when storing and transporting, always pay attention to fireproof and dampproof
Application:
The product is particular excellent kinds of general-purpose ammonia anti-ageing agent. It particular suit to full-steel, semi-steel radial ply tire and it apply to many kinds of the tires, rubber tube, gummed tape, rubber overshoes and general industrial rubber products and also suits to emulsion products.
Package &storage:
25kg paper bag in lined with plastic bag. It should be stored in a cool well-ventilated area.
Storage:
Keep container tightly closed in a cool, well-ventilated place. The recommended maximum storage life is 2 years when stored under normal conditions
Credit Group was established in 2003, located in Beijing. We are professional manufacturer of cross linking peroxide, rubber accelerator, rubber antioxidant, Silicone rubber and so on..
Our main products are:
Rubber Accelerator: Such as MBT,MBTS, CBS, TMQ, DPG, TMTD, ZDBC, PX, DETU, DTDM;
Rubber Antioxidant: Such as:MB, MBZ, 6PPD, IPPD, D, TMQ;
Silicone rubber for any kind of usage;
Light Stabilizer; Fumed silica;
Crosslinking agent like:Di(2,4-dichlorobenzoyl) peroxide; ...
View more
>>
Basic Information
Business Type:
Manufacturer, Trading Company
Product/Service (We Sell):
additives for polymers,polymer additives,silicone rubber,fumed silica,crosslinking peroxide,rubber accelerator,antioxidant,chemical additive,additives for PVC,vulcanization accelerator,chemical auxiliary,plastic additive
Number of Employees:
11 - 50 People
Trade & Market
Main Markets:
North America
South America
Eastern Europe
Southeast Asia
Africa
Oceania
Mid East
Eastern Asia
Western Europe
Total Annual Sales Volume:
US$2.5 Million - US$5 Million
Export Percentage:
51% - 60%
Factory Information
QA/QC:
Third Parties
Management Certification:
ISO 9001:2000 ISO 14001:2004
Contract Manufacturing:
OEM Service Offered Buyer Label Offered
Apperance:Amber to browns flake or granular
CAS:26780-96-1
Packing:25kg paper bag
ANTIOXIDANT TMQ(RD)
Chemical Composition: 2,2,4-trimethy1-1,2-dihydroquinoline
Product Data:
Chemical name: 2,2,4-trimethyl-1,2-dihydroquinoline content
Specification:
Item
Specification
Appearance
Amber to browns flake or granular
Initial M.P. (Min)
80-100
Loss on drying (Max) %
0.30
Ash (Max) %
0.30
Properties:
This product in brown piece of amber, poisonless, Soluble in benzene, chloroform, carbon disulfide and acetone, but not soluble in water. Its toxicity is light, pollution is low, fine solution with rubber. This product is combustible, when storing and transporting, always pay attention to fireproof and dampproof
Application:
The product is particular excellent kinds of general-purpose ammonia anti-ageing agent. It particular suit to full-steel, semi-steel radial ply tire and it apply to many kinds of the tires, rubber tube, gummed tape, rubber overshoes and general industrial rubber products and also suits to emulsion products.
Package &storage:
25kg paper bag in lined with plastic bag. It should be stored in a cool well-ventilated area.
Storage:
Keep container tightly closed in a cool, well-ventilated place. The recommended maximum storage life is 2 years when stored under normal conditions
Credit Group was established in 2003, located in Beijing. We are professional manufacturer of cross linking peroxide, rubber accelerator, rubber antioxidant, Silicone rubber and so on..
Our main products are:
Rubber Accelerator: Such as MBT,MBTS, CBS, TMQ, DPG, TMTD, ZDBC, PX, DETU, DTDM;
Rubber Antioxidant: Such as:MB, MBZ, 6PPD, IPPD, D, TMQ;
Silicone rubber for any kind of usage;
Light Stabilizer; Fumed silica;
Crosslinking agent like:Di(2,4-dichlorobenzoyl) peroxide; ...
View more
>>
Basic Information
Business Type:
Manufacturer, Trading Company
Product/Service (We Sell):
additives for polymers,polymer additives,silicone rubber,fumed silica,crosslinking peroxide,rubber accelerator,antioxidant,chemical additive,additives for PVC,vulcanization accelerator,chemical auxiliary,plastic additive
Number of Employees:
11 - 50 People
Trade & Market
Main Markets:
North America
South America
Eastern Europe
Southeast Asia
Africa
Oceania
Mid East
Eastern Asia
Western Europe
Total Annual Sales Volume:
US$2.5 Million - US$5 Million
Export Percentage:
51% - 60%
Factory Information
QA/QC:
Third Parties
Management Certification:
ISO 9001:2000 ISO 14001:2004
Contract Manufacturing:
OEM Service Offered Buyer Label Offered
Rubber Antioxidant for rubber
1,Being a general type of accelerator.
2,Rapid promoting function for rubber.
3,High quality with competitive price.
Rubber Antioxidant4010NA
Item
Specifications
Appearance
White to dark purple brown pastilles
Assay (%)Min
95
Initial Melting Point ()Min.
70
Heat Loss (%)Max.
0.3
Ash (%)Max.
0.2
2,Rapid promoting function for rubber.
3,High quality with competitive price.
Rubber Antioxidant4010NA
Item
Specifications
Appearance
White to dark purple brown pastilles
Assay (%)Min
95
Initial Melting Point ()Min.
70
Heat Loss (%)Max.
0.3
Ash (%)Max.
0.2
Rubber Antioxidant
1,Being a general type of accelerator.
2,Rapid promoting function for rubber.
3,High quality with competitive price.
Rubber Antioxidant4010NA
Item
Specifications
Appearance
White to dark purple brown pastilles
Assay (%)Min
95
Initial Melting Point ()Min.
70
Heat Loss (%)Max.
0.3
Ash (%)Max.
0.2
2,Rapid promoting function for rubber.
3,High quality with competitive price.
Rubber Antioxidant4010NA
Item
Specifications
Appearance
White to dark purple brown pastilles
Assay (%)Min
95
Initial Melting Point ()Min.
70
Heat Loss (%)Max.
0.3
Ash (%)Max.
0.2
Rubber Grade Carbon Black(N220/330/550/660)
1. Black powder or Granular
2. Tire tread,high quality industrial rubber products etc
3.timely delivery
4.free sample
Carbon black
Items
N220
N330
N550
N660
Iodine Absorption Number g/kg
121+/-5
82+/-5
43+/-4
36+/-4
DBP Absorption Number10 m/kg
114+/-5
102+/-5
121+/-5
90+/-5
DBP Absorption Number of Compressed Sample10 m/kg
93-107
81-95
81-95
68-82
CTAB Surface Area 10 m /kg
106-116
79-87
38-46
31-39
Nitrogen Surface Area
114-124
78-88
38-46
30-40
Tint Strength
110-120
98-108
-
-
Heating Loss
3.0
2.5
2.5
1.5
Ash
0.5
0.5
0.5
0.5
Tensile Strength Map≥
-0.8
-1.5
-3.5
-3.5
Extension%
+10
-10
-10
+10
Map Modulus at 300%
-2.5+/-1.3
-1.7+/-1.3
-1.7+/-1.3
-3.5+/-1.3
Usage: Tyre and other rubber product, master patch for rubber, plastic, ink and paint
2. Tire tread,high quality industrial rubber products etc
3.timely delivery
4.free sample
Carbon black
Items
N220
N330
N550
N660
Iodine Absorption Number g/kg
121+/-5
82+/-5
43+/-4
36+/-4
DBP Absorption Number10 m/kg
114+/-5
102+/-5
121+/-5
90+/-5
DBP Absorption Number of Compressed Sample10 m/kg
93-107
81-95
81-95
68-82
CTAB Surface Area 10 m /kg
106-116
79-87
38-46
31-39
Nitrogen Surface Area
114-124
78-88
38-46
30-40
Tint Strength
110-120
98-108
-
-
Heating Loss
3.0
2.5
2.5
1.5
Ash
0.5
0.5
0.5
0.5
Tensile Strength Map≥
-0.8
-1.5
-3.5
-3.5
Extension%
+10
-10
-10
+10
Map Modulus at 300%
-2.5+/-1.3
-1.7+/-1.3
-1.7+/-1.3
-3.5+/-1.3
Usage: Tyre and other rubber product, master patch for rubber, plastic, ink and paint
Rubber Sheeting Deoxidizer
1. PH value was neutral
2. No corrosion
3. No burnning
4. No poisonous
5.Safety and environment
USE
During printing, CS-PE9 deoxidizer can restore the cupped surface of offset printing rubber sheeting (including air cushion rubber sheet), rapidly remove the dirt, ink imprint, and oxide film, and prolong its service life.
Characteristics
With soft cotton cloth or brush pen dipping the product, clean the cupped place, and several minutes later, the cupped place will be restored, and the dosage depends on the cupped surface size. As to the cleaning of ink print, oil dirt and ink block and bright film, the dosage depends on practical conditions.
2. No corrosion
3. No burnning
4. No poisonous
5.Safety and environment
USE
During printing, CS-PE9 deoxidizer can restore the cupped surface of offset printing rubber sheeting (including air cushion rubber sheet), rapidly remove the dirt, ink imprint, and oxide film, and prolong its service life.
Characteristics
With soft cotton cloth or brush pen dipping the product, clean the cupped place, and several minutes later, the cupped place will be restored, and the dosage depends on the cupped surface size. As to the cleaning of ink print, oil dirt and ink block and bright film, the dosage depends on practical conditions.
Rubber accelerator D
1.Rubber accelerator D/DPG
2.ISO 9001:2000
3.Shipment within 10 days on receipt of deposit
4.Payment:TT, L/C
5.MOQ: 2 MTS
Accelerator DPG
SPECIFICATION:
Item
Powder
Oil powder
Granule
Appearance
Gray-white powder
Gray-white powder
Gray-white granule
Initial M.P. (Min) ≥ °C
145.0
145.0
145.0
Loss on drying (Max) ≤ %
0.30
0.40
0.30
Ash (Max) ≤ %
0.30
0.40
0.30
Residues on 150μm sieve, % ≤
0.10
0.10
-
Oil content, %
-
0.0-2.0
-
Granular diameter mm
-
-
1.5
Properties:
No odor or poison. Specific gravity:1.13--1.23. Soluble in chloroform, toluene benzene and ethanol; Insoluble in gasoline and water. Not hygroscopic.
Application:
Used as a secondary accelerator with thiazoles and sulphenamides in NR and SBR compounds. Exhibits better storage stability compared to thiuram and dithiocarbamates but is not so active. DPG can be used in latex as secondary gelling agent (foam stabilizer) in the silico-flouride foam process.
Packing:
In 25kgs bag.
Storage:
Keep container tightly closed in a cool, well-ventilated place. The recommended maximum storage life is 2 years when stored under normal conditions.
2.ISO 9001:2000
3.Shipment within 10 days on receipt of deposit
4.Payment:TT, L/C
5.MOQ: 2 MTS
Accelerator DPG
SPECIFICATION:
Item
Powder
Oil powder
Granule
Appearance
Gray-white powder
Gray-white powder
Gray-white granule
Initial M.P. (Min) ≥ °C
145.0
145.0
145.0
Loss on drying (Max) ≤ %
0.30
0.40
0.30
Ash (Max) ≤ %
0.30
0.40
0.30
Residues on 150μm sieve, % ≤
0.10
0.10
-
Oil content, %
-
0.0-2.0
-
Granular diameter mm
-
-
1.5
Properties:
No odor or poison. Specific gravity:1.13--1.23. Soluble in chloroform, toluene benzene and ethanol; Insoluble in gasoline and water. Not hygroscopic.
Application:
Used as a secondary accelerator with thiazoles and sulphenamides in NR and SBR compounds. Exhibits better storage stability compared to thiuram and dithiocarbamates but is not so active. DPG can be used in latex as secondary gelling agent (foam stabilizer) in the silico-flouride foam process.
Packing:
In 25kgs bag.
Storage:
Keep container tightly closed in a cool, well-ventilated place. The recommended maximum storage life is 2 years when stored under normal conditions.
(20 Years Professional,Bottom Price!!!)Columnar Activated Carbon For Wastewater Purification
1.Lodine volume:more than 800mg/g
2.20 years activated carbon product history
3.Pass ISO 9001
4.High quality, lower price
Coal-based columnar activated carbon
Processed from the use of advanced technology refined appearance black cylindrical particle; with appropriate pore structure and good adsorption properties, high mechanical strength, easy to repeated regeneration, cost and low; for the toxic gas purification, gas processing, industrial and domestic water purification treatment, solvent recovery and so on.
Specifications
Analysis Project
Test Data
Analysis Project
Test Data
Iodine volume
>800mg/g
Strength
>92%
BET
>850m
2
/g
Methylene blue value
120-150mg/g
The total pore volume
>0.8cm
3
/g
The remaining chlorine adsorption rate
≥85%
Packing density
0.45-0.55g/cm3
The table size is divided into1.0, 1.5, 2.0, 3.0, 4.0. Other indicators can be adjusted with the user requirements
Functions
(activated carbon):
1.large speicific surface area,high adsorption
2.mainly used for refining sugar,medical,beverage,wine
3.also used for decoloration,purification of organic solvent
4.high machinery capacity,regeneration,low cost
2.20 years activated carbon product history
3.Pass ISO 9001
4.High quality, lower price
Coal-based columnar activated carbon
Processed from the use of advanced technology refined appearance black cylindrical particle; with appropriate pore structure and good adsorption properties, high mechanical strength, easy to repeated regeneration, cost and low; for the toxic gas purification, gas processing, industrial and domestic water purification treatment, solvent recovery and so on.
Specifications
Analysis Project
Test Data
Analysis Project
Test Data
Iodine volume
>800mg/g
Strength
>92%
BET
>850m
2
/g
Methylene blue value
120-150mg/g
The total pore volume
>0.8cm
3
/g
The remaining chlorine adsorption rate
≥85%
Packing density
0.45-0.55g/cm3
The table size is divided into1.0, 1.5, 2.0, 3.0, 4.0. Other indicators can be adjusted with the user requirements
Functions
(activated carbon):
1.large speicific surface area,high adsorption
2.mainly used for refining sugar,medical,beverage,wine
3.also used for decoloration,purification of organic solvent
4.high machinery capacity,regeneration,low cost
1 mm spherical activated carbon
Coal based spherical activated carbon
Particle size: 1mm
CTC: 40-85%
This kind of activated carbon is made of different coal as per customers' requirement and its usage. Being added fix quantity of binder, it can be produced to spherical of different diameter after the process of molding, carbonizing and activation. It has desirable mechanical strength, excellent adsorption, pretty low pass-resistance, equally pore volume distributing and high roundners of granule.
Coal based spherical activated carbon
Type
Iodine number (mg/g)
Benzene adsorption(%)
CCL4(%)
Ash (%)
Moisture (%)
Size (mm)
B/A-S
950-1100
30-90
40-85
8-15
3-5
Φ1
Particle size: 1mm
CTC: 40-85%
This kind of activated carbon is made of different coal as per customers' requirement and its usage. Being added fix quantity of binder, it can be produced to spherical of different diameter after the process of molding, carbonizing and activation. It has desirable mechanical strength, excellent adsorption, pretty low pass-resistance, equally pore volume distributing and high roundners of granule.
Coal based spherical activated carbon
Type
Iodine number (mg/g)
Benzene adsorption(%)
CCL4(%)
Ash (%)
Moisture (%)
Size (mm)
B/A-S
950-1100
30-90
40-85
8-15
3-5
Φ1
Acrylic Acid-2-Acrylamido-2-Methylpropane Sulfonic Acid Copolymer (AA/AMPS) water treatment chemical
AA/AMPS water treatment chemical
1.ISO 9001:2000
2.Manufacture since 1988
3.Solid content %30 min
(AA/AMPS) water treatment chemical
CAS No. 40623-75-4
Properties:
AA/AMPS is the copolymer of acrylic acid and 2-acrylanmido-2-methylpropanesulfonic acid (AMPS). Due to including carboxylic group (scale inhibition and dispersion) and sulfonic acid group (strong polarity) in this copolymer, AA/AMPS has high calcium tolerance and good scale inhibition for calcium phosphate, calcium carbonate and zinc scale. When built with organophosphines, the synergic effect is obvious. AA/AMPS is suitable to be used in water quality of high pH and high alkaline, it is one of the ideal scale inhibitor and dispersant on high concentration index.
Specification:
items
index
Appearance
Colorless or light yellow clear liquid
Solid content %
40 min
Free monomer (as AA)%
0.8 max
Density (20°C)g/cm
3
1.15 min
pH(1% solution)
3.5-4.5
Viscosity mpa.s
90-200
Usage:
AA/AMPS can be used as scale inhibitor and dispersant in open circulating cool water system, oilfield refill water system, metallurgy system and iron & steel plants to prevent sediment of ferric oxide. When built with organophosphorines and zinc salt, the suitable pH value is 7.0~9.5.AA/AMPS can also be used as dyeing auxiliaries for textile.
Package and Storage:
Normally In 250kg net Plastic Drum, IBC drum can also be used as required.Storage for ten months in room shady and dry place.
1.ISO 9001:2000
2.Manufacture since 1988
3.Solid content %30 min
(AA/AMPS) water treatment chemical
CAS No. 40623-75-4
Properties:
AA/AMPS is the copolymer of acrylic acid and 2-acrylanmido-2-methylpropanesulfonic acid (AMPS). Due to including carboxylic group (scale inhibition and dispersion) and sulfonic acid group (strong polarity) in this copolymer, AA/AMPS has high calcium tolerance and good scale inhibition for calcium phosphate, calcium carbonate and zinc scale. When built with organophosphines, the synergic effect is obvious. AA/AMPS is suitable to be used in water quality of high pH and high alkaline, it is one of the ideal scale inhibitor and dispersant on high concentration index.
Specification:
items
index
Appearance
Colorless or light yellow clear liquid
Solid content %
40 min
Free monomer (as AA)%
0.8 max
Density (20°C)g/cm
3
1.15 min
pH(1% solution)
3.5-4.5
Viscosity mpa.s
90-200
Usage:
AA/AMPS can be used as scale inhibitor and dispersant in open circulating cool water system, oilfield refill water system, metallurgy system and iron & steel plants to prevent sediment of ferric oxide. When built with organophosphorines and zinc salt, the suitable pH value is 7.0~9.5.AA/AMPS can also be used as dyeing auxiliaries for textile.
Package and Storage:
Normally In 250kg net Plastic Drum, IBC drum can also be used as required.Storage for ten months in room shady and dry place.
Rubber antioxidant IPPD(4010NA)
Rubber antioxidant IPPD(4010NA)
Chemical name: N-Isopropyl-N'-phenyl-P-phenylenediamine
Moleculor Formula: C15H18N
Rubber antioxidant IPPD(4010NA)
Chemical name: N-Isopropyl-N'-phenyl-P-phenylenediamine
Moleculor Formula: C15H18N2
CAS NO: 101-72-4
Specification:
Appearance:Dark brown to dark violet pastilles
Purity:96%min
Melting point(centigrade degree):70.0min
Heating Loss: 0.3%max
Ash content: 0.3%max
Package: 25kg in kraft paper bag net each lined with PE bag inside.
Our company manufactures various rubber antioxidants, such as IPPD, 6PPD, TMQ. If you are interested on them, please feel free to contact us!!
Best Regards
Anner
Chemical name: N-Isopropyl-N'-phenyl-P-phenylenediamine
Moleculor Formula: C15H18N
Rubber antioxidant IPPD(4010NA)
Chemical name: N-Isopropyl-N'-phenyl-P-phenylenediamine
Moleculor Formula: C15H18N2
CAS NO: 101-72-4
Specification:
Appearance:Dark brown to dark violet pastilles
Purity:96%min
Melting point(centigrade degree):70.0min
Heating Loss: 0.3%max
Ash content: 0.3%max
Package: 25kg in kraft paper bag net each lined with PE bag inside.
Our company manufactures various rubber antioxidants, such as IPPD, 6PPD, TMQ. If you are interested on them, please feel free to contact us!!
Best Regards
Anner
Rubber carbon black,white carbon black
Rubber carbon black,white carbon black
2Purity:92%,white powder/granular
3usage:tyre rubber
4CAS:1853-98-5
5ISO9001,COA
Rubber carbon black,white carbon black
2Purity:92%,white powder/granular
3usage:tyre rubber
4CAS:1853-98-5
5ISO9001,COA
white carbon black ,carbon black n220 n330 n550 n660
Appearance: Powder or Granular
Applications: Rubber Industry, such as Tyres, Cable, Tape, etc.
XD-0001
Apperance
white powder
SiO2(%)
more than 90%
Loss on heating(%)105°C
4.0-7.0
Loss on ignition (%)
3.0-6.0
PH
6.0-7.5
Specific surface area BET(cm2/g)
145-165
DBP absorption value(cm3/g)
2.0-3.0
Total Fe mg/kg
<500
usage
Main used in tires,and also translucent, colored plastic soles/others
XD-0002
Apperance
white powder
SiO2(%)
more than 90%
Loss on heating(%)105°C
4.0-7.0
Loss on ignition (%)
3.0-6.0
Specific surface area BET(cm2/g)
165-185
DBP absorption value(cm3/g)
2.0-3.0
PH
5.5-7.0
Usage
Main in Radial tire,also used in soles,rubber tube,rubber tape,Solid tire,Cycle tire,and Colored tires
XD-0003
Apperance
white powder
SiO2(%)
more than 90%
Loss on heating(%)105°C
4.0-8.0
Loss on ignition (%)
3.0-6.0
Specific surface area BET(cm2/g)
200-300
DBP absorption value(cm3/g)
2.8-3.5
PH
6.5-7.5
Residuel on sieve
less than 0.03
XD-0004
Apperance
white powder
SiO2(%)
more than 90%
Loss on heating(%)105°C
4.0-6.0
Loss on ignition (%)
3.0-6.0
Specific surface area BET(cm2/g)
170-220
DBP absorption value(cm3/g)
2.0-3.5
PH
6.5-7.5
Residuel on sieve
less than 0.03
We accept sample order, So if you or your friends are in china ,we could send some free sample,Or we only charge part of shipping fee if delivery to other countries.So pls be free to ask for sample from us
Our company is manufacture and high-tech skill private enterprises. We have advanced production equipment and superb professional technical personnel.
Our customers all over the world, widely exported to southeast Asia, South Asia, and Europe. The company will sincerely cooperate with old and new customers, cooperate and develop a broader domestic and international market, together to seek common development, and create new brilliance
If you have any interests in our production, pls be free to get touch with us!
Yours Elrira
Tel:86 - 0634 - 6175885
FAx:0634 86 6175885
2Purity:92%,white powder/granular
3usage:tyre rubber
4CAS:1853-98-5
5ISO9001,COA
Rubber carbon black,white carbon black
2Purity:92%,white powder/granular
3usage:tyre rubber
4CAS:1853-98-5
5ISO9001,COA
white carbon black ,carbon black n220 n330 n550 n660
Appearance: Powder or Granular
Applications: Rubber Industry, such as Tyres, Cable, Tape, etc.
XD-0001
Apperance
white powder
SiO2(%)
more than 90%
Loss on heating(%)105°C
4.0-7.0
Loss on ignition (%)
3.0-6.0
PH
6.0-7.5
Specific surface area BET(cm2/g)
145-165
DBP absorption value(cm3/g)
2.0-3.0
Total Fe mg/kg
<500
usage
Main used in tires,and also translucent, colored plastic soles/others
XD-0002
Apperance
white powder
SiO2(%)
more than 90%
Loss on heating(%)105°C
4.0-7.0
Loss on ignition (%)
3.0-6.0
Specific surface area BET(cm2/g)
165-185
DBP absorption value(cm3/g)
2.0-3.0
PH
5.5-7.0
Usage
Main in Radial tire,also used in soles,rubber tube,rubber tape,Solid tire,Cycle tire,and Colored tires
XD-0003
Apperance
white powder
SiO2(%)
more than 90%
Loss on heating(%)105°C
4.0-8.0
Loss on ignition (%)
3.0-6.0
Specific surface area BET(cm2/g)
200-300
DBP absorption value(cm3/g)
2.8-3.5
PH
6.5-7.5
Residuel on sieve
less than 0.03
XD-0004
Apperance
white powder
SiO2(%)
more than 90%
Loss on heating(%)105°C
4.0-6.0
Loss on ignition (%)
3.0-6.0
Specific surface area BET(cm2/g)
170-220
DBP absorption value(cm3/g)
2.0-3.5
PH
6.5-7.5
Residuel on sieve
less than 0.03
We accept sample order, So if you or your friends are in china ,we could send some free sample,Or we only charge part of shipping fee if delivery to other countries.So pls be free to ask for sample from us
Our company is manufacture and high-tech skill private enterprises. We have advanced production equipment and superb professional technical personnel.
Our customers all over the world, widely exported to southeast Asia, South Asia, and Europe. The company will sincerely cooperate with old and new customers, cooperate and develop a broader domestic and international market, together to seek common development, and create new brilliance
If you have any interests in our production, pls be free to get touch with us!
Yours Elrira
Tel:86 - 0634 - 6175885
FAx:0634 86 6175885
Rubber grade carbon black
1. Black powder or Granular
2. Tire tread,high quality industrial rubber products etc
3.timely delivery
4.free sample
Carbon black
Items
N220
N330
N550
N660
Iodine Absorption Number g/kg
121+/-5
82+/-5
43+/-4
36+/-4
DBP Absorption Number10 m/kg
114+/-5
102+/-5
121+/-5
90+/-5
DBP Absorption Number of Compressed Sample10 m/kg
93-107
81-95
81-95
68-82
CTAB Surface Area 10 m /kg
106-116
79-87
38-46
31-39
Nitrogen Surface Area
114-124
78-88
38-46
30-40
Tint Strength
110-120
98-108
-
-
Heating Loss
3.0
2.5
2.5
1.5
Ash
0.5
0.5
0.5
0.5
Tensile Strength Map≥
-0.8
-1.5
-3.5
-3.5
Extension%
+10
-10
-10
+10
Map Modulus at 300%
-2.5+/-1.3
-1.7+/-1.3
-1.7+/-1.3
-3.5+/-1.3
Usage: Tyre and other rubber product, master patch for rubber, plastic, ink and paint
2. Tire tread,high quality industrial rubber products etc
3.timely delivery
4.free sample
Carbon black
Items
N220
N330
N550
N660
Iodine Absorption Number g/kg
121+/-5
82+/-5
43+/-4
36+/-4
DBP Absorption Number10 m/kg
114+/-5
102+/-5
121+/-5
90+/-5
DBP Absorption Number of Compressed Sample10 m/kg
93-107
81-95
81-95
68-82
CTAB Surface Area 10 m /kg
106-116
79-87
38-46
31-39
Nitrogen Surface Area
114-124
78-88
38-46
30-40
Tint Strength
110-120
98-108
-
-
Heating Loss
3.0
2.5
2.5
1.5
Ash
0.5
0.5
0.5
0.5
Tensile Strength Map≥
-0.8
-1.5
-3.5
-3.5
Extension%
+10
-10
-10
+10
Map Modulus at 300%
-2.5+/-1.3
-1.7+/-1.3
-1.7+/-1.3
-3.5+/-1.3
Usage: Tyre and other rubber product, master patch for rubber, plastic, ink and paint
Rubber vulcanizing accelerator CZ(CBS)
Rubber vulcanizing accelerator CZ(CBS)
Purity: 98-99%
Quality: CIQ and SGS
Rubber vulcanizing accelerator CZ(CBS)
Purity: 98-99%
Quality: CIQ and SGS
items
classification
premier
1 st class
certified
Appearance
Light yellow powder or grain Grayish white
Melting point °C more than
99.0
98.0
97.0
Mass loss less than
0.20
0.30
0.50
Ash content less than
0.20
0.30
0.40
Sieve residue less than
0.00
0.05
0.10
Methanol insoluble less than
0.50
0.50
0.80
Purity more than
97.00
95.00
Free amine less than
0.50
0.50
0.50
Purity and free amine is tested according to clients request
Purity: 98-99%
Quality: CIQ and SGS
Rubber vulcanizing accelerator CZ(CBS)
Purity: 98-99%
Quality: CIQ and SGS
items
classification
premier
1 st class
certified
Appearance
Light yellow powder or grain Grayish white
Melting point °C more than
99.0
98.0
97.0
Mass loss less than
0.20
0.30
0.50
Ash content less than
0.20
0.30
0.40
Sieve residue less than
0.00
0.05
0.10
Methanol insoluble less than
0.50
0.50
0.80
Purity more than
97.00
95.00
Free amine less than
0.50
0.50
0.50
Purity and free amine is tested according to clients request
Subscribe to:
Posts (Atom)