Poly Aluminium Chloride-spraying type PAC

1.PAC is a kind of high effective ingredien
2.Flocculation body shape, active, acquired.
3.No need to add alkaline additives
PAC:

packaging and storage
1, topical plastic sacks, with plastic film suit, 25kg net weight of each bag, can according to user requirements, otherwise liquid determing the sales.
2, the product with oxidising toxic substances, transportation and storage, storage attention of waterproof, moistureproof, packaging Xun break.
3 and when using water should be chosen according to the scale, the purification effect is good, TouFangLiang small optimal point. With the match with the solution, the water should be chosen according to the actual situation.
4, use water dissolved solids, first with a 10-25% of the solution, and then to the required concentration, water dilute solution in the water slowly release first, and constantly mixing.

Determing the DTC is an easy to use, non-toxic, high efficient, low-cost DTC water properties of it, and will gradually replace traditional use alum, aluminium, chloride-ferric chloride and expensive part of the polymer flocculant products etc. Its main characteristic is less dosage, settlement, easy dehydration comprehensive effect than other products, and welcome by customers.
Quick response and flocculation coagulation and subsidence quickly, good water filtration dehydration, cake easily. Don't suffer water temperature, PH value, and turbidity restrictions. Treatment of high turbidity water, just several seconds, can finish. The coagu-flocculation surface sink rate reaches above, 6mm/Sec after cleansing in more than 3mg/L turbidity below. Can be used without adding any additives.

Name
solid
Excellent article
First-class article
AL
2
o
3
%≥
30.0
28.0
Base saturability %
40-90
40-90
Water content
0.3
1.0
PH(1% water solution)
3.5-5.0
3.5-5.0
N %≤
0.01
As% ≤
0.0002
Pb%≤
0.001