Activated alumina fluorine killer supplier

Activated alumina
1)large pore volume
2)High surface area,&thermal stability
3)Free samples are available


Product introduction
Defluoridation agent:
Activated alumina is also widely used to remove fluoride from drinking water. In the US, there are widespread programs to fluoridate drinking water. However, in certain regions, such as the Jaipur region of India, there is enough fluorine in the water to cause fluorosis. Activated alumina filters can easily reduce fluoride levels from .5 ppm to less than .1 ppm. The amount of fluoride leached from the water being filtered depends on how long the water is actually touching the alumina filter media. Basically, the more alumina in the filter, the less fluoride will be in the final, filtered water. Lower temperature water, and lower pH water (acidic water) are filtered more effectively too.


Characteristics of the product
Activated alumina has a very high surface-area-to-weight ratio. That means it has a lot of very small pores, almost like tunnels, that run throughout it. It has large capacity of absorption, high surface area, high mechanical strength and thermal stability.

Product technical specification
Index name
Al
2
o
3

%
Sio
2
%
Fe
2
o3
%
Na20
%
Burning reduction
%
Apparent density
g/ml
Specific surface area
M
2
/g
Hole volume
Ml/g
Crush strength
N/particle
Technical


requirements
≥92
≤
0.10
≤
0.04
≤
0.45
≤8
≤0.75
≥260
≥0.40
≥20
1-2mm
≥92
≤
0.10
≤
0.04
≤
0.45
≤8
≤0.75
≥260
≥0.40
≥40
2-3mm
≥92
≤
0.10
≤
0.04
≤
0.45
≤8
≤0.75
≥260
≥0.40
≥80
3-5mm
≥92
≤
0.10
≤
0.04
≤
0.45
≤8
≤0.75
≥260
≥0.40
≥100
4-6mm
≥92
≤
0.10
≤
0.04
≤
0.45
≤8
≤0.75
≥260
≥0.40
≥140
5-8mm