JH-101 series Corrosion Inhibitor

1. Kinds of corrosion inhibitors
2. Corrosion rate is higher than 90%
3. low dosage
Corrosion Inhibitor Intermediate
1, Introduction
Normally, imidazoline is the corrosion ingredient of corrosion inhibitor, while we use bis-imidazoline as corrosion ingredients. There are two pairs of imidazoline molecule pentacyclic group and two adsorption groups in bis-inidazoline, so its adsorption is higher the imidazoline.
2, Technique sheet
Items
Index
Appearance
Yellow to red-brown liquid
PH value
9.0-11.0
Active ingredient(%)
≥55
Solubility
Miscible with water
Density(g/cm
3
)
1.00-1.15
3, Method and use
a. Mix it with water according to 2 : 8 ratio, you can get corrosion inhibitor products.
b. Suitable for antisepsis of waste water reinjection equipment in oil recovery plant.
c. Reference dosage 30-50ppm. Its inhibition rate is higher than 90%, corrosion rate is lower than 0.05mm / a .