Mix Bed Resin(MB101)

MB101 is a high quality resin mixture for direct purification of water.
MB101(Ready to used Mixed Bed)
For ultra pure water production
MB101 is a high quality resin mixture for direct purification of water. It is suitable for use in regenerable or non-regenerable cartridges and in large ion exchange units. Passage of water at recommended flow rates through the resin as supplied can achieve almost complete reduction of total dissolved solids. The residuals produce average conductivity values of about 0.1 µs cm-1 for a major portion of the service run which may be extended depending upon the final water quality acceptable. Equivalent volumes of ultra pure water may be obtained after regeneration but only if sufficient regenerant quantities are employed to achieve the percentage conversion levels equivalent to those of the "as supplied" resin. Generally acceptable capacity and quality is obtained economically at lower regeneration
Typical physical & Chemical characteristics
Guaranteed Sales Specification
Units
OH - Form
H + Form
Polymer Matrix Structure
-
Gel PolyStyrene Crosslinked with DVB


Anion
Cation
Functional Group
-
Quaternary Amine
Sulfonic acid
Volume ratio
-
60%
40%
Total Exchange Capacity, min.
meq/l
1.30
1.9
Water Retention Capacity
%
53-60
45-50
Particle Size Distribution
-
-
-
>1.25 mm max.
%
5
5
<0.40 mm, max
%
2
2
Whole Bead Count, min.
%
95
95
Moisture Content as shipped, max
-
65%
PH Range, Stability
-
0-14
Shipping weight (approx.)
-
705-740 g/l
Ionic conversion, min.
%
90
99