Best selling efficient dryer activated alumina

Activaeted alumina:
1)More than 10 years professional manufacturer
2)Large surface area
3)Strong adsorption ability



Description
Activated alumina
is manufactured from aluminium hydroxide by dehydroxylating it in a way that produces a highly porous material; this material can have a surface area significantly over 200 square metres/g. The compound is used as a desiccant (to keep things dry by absorbing water from the air) and as a filter of fluoride, arsenic and selenium in drinking water. It is made of aluminium oxide (alumina; Al2O3), the same chemical substance as sapphire and rubies (but without the impurities that give those gems their color). It has a very high surface-area-to-weight ratio. That means it has a lot of very small pores, almost like tunnels, that run throughout it.

Desiccant
Use as a desiccant, it works by a process called adsorption. The water in the air actually sticks to the alumina itself in between the tiny passages, as the air passes through them. The water molecules become trapped so that the air is dried out as it passes through the filter. This process is reversible, and if the alumina desiccant is heated to about 200°C it will release all of the water stored in it. This process is called regenerating the desiccant. Air always has some water in it; one way to measure the amount of water in the air is the air's dew point.

Product technical data
Index name
Al
2
o
3

%
Sio
2
%
Fe
2
o3
%
Na20
%
Burning reduction
%
Apparent density
g/ml
Specific surface area
M
2
/g
Hole volume
Ml/g
Crush strength
N/particle
Technical


requirements
≥92
≤
0.10
≤
0.04
≤
0.45
≤8
≤0.75
≥260
≥0.40
≥20
1-2mm
≥92
≤
0.10
≤
0.04
≤
0.45
≤8
≤0.75
≥260
≥0.40
≥40
2-3mm
≥92
≤
0.10
≤
0.04
≤
0.45
≤8
≤0.75
≥260
≥0.40
≥80
3-5mm
≥92
≤
0.10
≤
0.04
≤
0.45
≤8
≤0.75
≥260
≥0.40
≥100
4-6mm
≥92
≤
0.10
≤
0.04
≤
0.45
≤8
≤0.75
≥260
≥0.40
≥140
5-8mm

The above technical datas are just for your reference
Packaging:25kg in the woven bag with inner plastic film or as your request