Corrosion Inhibitor Intermediate

1.Suitable for antisepsis of waste water reinjection equipment in oil recovery plant.
2.Main ingredient is bis-imidazoline.
Corrosion Inhibitor Intermediate

1. Introduction
Normally, imidazoline is the corrosion ingredient of corrosion inhibitor, while we use bis-imidazoline as corrosion ingredients. There are two pairs of imidazoline molecule pentacyclic group and two adsorption groups in bis-inidazoline, so its adsorption is higher than the imidazoline.
2. Technical data sheet
Items
Index
Appearance
Yellow to red-brown liquid
PH value
9.0-11.0
Active ingredient(%)
≥55
Solubility
Miscible with water
Density(g/cm3)
1.00-1.15
3. Method and Use
a. Mix it with water according to 3:7 ratios,you can get corrosion inhibitor products.
b. Suitable for antisepsis of waste water reinjection equipment in oil recovery plant and atmospheric pressure, catalytic equipment in refinery.
c. Reference dosage 30-50ppm. Its inhibition rate is higher than 85%, corrosion rate is lower than 0.05mm / a. Add 30ppm in refinery, the iron ions can be reduced to below 2ppm.
4. Packing and storage
a. Net weight 200KG / plastic drum.
b. Shelf life isor one year.