Water Treatment Chemicals: 2011-08-28

Saturday, September 3, 2011

Hydroxypropyl Guar Gum powder for oilfield

1. low-damage fracturing fluid thickener
2. applied in oilfield fracturing / sand control / water control operations.
Hydroxypropyl guar gum is a new type of low-damage fracturing fluid thickener produced through chemical modification of guar gum. It boasts high viscosity, low residue, good water solubility, low moisture and water insolubles. Thanks to little damage to sandstone reservoir, easily controlled rheological behavior and easily flowback from stratum, it is mainly used as water-based fracturing fluid in fracturing of oil and gas well and prepad fluid in acidizing treatment. It is a must for thickening in fracturing of deep wells with high temperature and low permeability.
Hydroxypropyl guar gum powder fracturing fluid is a low damage fracturing fluid, suitable for fracturing of low permeability reservoir at 30°C-150°C. It is widely applied in oilfield fracturing, sand control, water control operations.

Item
gade I
grade II
appearance
free flow of powder
free flow of powder
0.125/0.09 screen residue

≤
1%

≤
1%
0.071/0.05 screen residue

≤
10%

≤
15%
moisture

≤
10.0%

≤
10.0%
PH
6.5-7.5
6.5-7.5
apparent viscosity (30°C,170s,0.6%)mpa.s
≥110
≥105
water insolubles

≤4.0%

≤7.5%
crosslinking property
can be picked up by the glass rod
can be picked up by the glass rod
fluidity
good
general
hydroxypropyl degree of substitution
≥0.30
≥0.15

Hydroxypropyl Guar Gum powder

Hydroxypropyl Industry grade Guar Gum powder

IMTP (Intalox Ring)

intalox saddle,metal intalox saddle,IMTP,SS304 intalox saddle,metal random packing,316Lintalox saddle,carbon steel intalox

Metallic Intalox Saddle Ring&IMTP
detail

Metal intalox Saddle Ring is high performance random packing successfully used in mass transfer towers both small and large diameter. It is frequently used in deep vacuum towers where low pressure drop is crucial and also high pressure towers where capacity significantly exceeds conventional trays. Metal Intalox Saddle Ring or metal saddle is available in various sizes, which give different combinations of efficiency and pressure drop.
Advantages:
•low pressure drop and high efficiency
•large effective interfacial area
•high mechanical strength
•low cost
Application:
• Transfer towers both small and large diameter
• Deep vacuum towers where low pressure drop is crucial and also high pressure towers where capacity significantly exceeds conventional trays
• Distillation, absorption etc
• High pressure towers
Technical Parameter:
Size
(
mm
)
Thickness
(mm)
Bulk density
(
kg/m3
)
Number
(per m3)
Free volume
(
%
)
Surface Area
(m2/m3)
Packing Factor
(m-1)
15
0.25
280
347000
96.5
305
167
25
0.3
255
135000
96.8
241
135
40
0.4
231
50200
97.1
161
79
50
0.4
149
15000
98.1
104
59
60
0.4
142
8400
98.2
85
50
70
0.5
113
4600
98.6
62
39

The above data is reference to material stainless steel (AISI304) in the material thickness shown. Other material available: carbon steel, stainless steel including 304, 304L, 410,316, 316L.

IN CHINA WATER TREATMENT HDLL-30%PAC

refining PAC, purification effect is obvious, flock speed is quick.
used in Tap water, industrial water, watstewater treatment.
Refined PAC,
Its main feature is that the water purification effect is obvious and the flock speed is quick. Major specifications:

names
Pruducts degree
potable water(first class)
Non-potable water(second class)
AL
2
O
3
MIN 29-32
MIN 29-30
basicity%
50-85
60-85
PH
3.5-5
3.5-5
Water-insoluble substances
capacity
MAX 0.5-1.5
MAX 1.5-3
Pb
PPm MAX 3
As
PPm MAX 0.5
Fe
PPm MAX 0.3
Hg
PPm MAX 0.2

The specific dosage schedule of the filter:
turbidity
30-100
100-250
250-400
400-1000
1000-5000
7500
Dosage 1mg/L
25.1
34.4
44.5
61.3
124.7
199
Turbidity after treatment
3
3
5
5
6
8

IODINE 950mg/g COAL-BASED POWDERED ACTIVATED CARBON

1.Certificates: CE; NSF; ISO9001
2.Competitive price, superior quality
3.Prompt reply
4.COAL-BASED POWDERED ACTIVATED CARBON
COAL-BASED POWDERED ACTIVATED CARBON

Applications:
1. Dechlorination, deoiling of industrial water;
2. Further purifying treatment of potable water and sewage water.

Products:
Coal-based activated carbon
For water purification
For desulfurization and denitrification
For desulfurization
For solvent recovery
For air purification
For catalyst carrier or catalyst
For protection
For high efficiency adsorption
For garbage burning
For pressure-swing adsorption

CELL: 86-15536583202
SKY: rainbowgeng1234

Producing Procedure:
Granular activated carbon
Briquetted activated carbon → powder→ packing →powdered activated carbon
Crushed activated carbon

IPA for chemical auxiliaries

99.9% high pure
good content
stable supply
Appearance transparent, colorless liquid without
insoluble
Color (Pt-Co) ≤10
Density (20°C) 0.784-0.787
Content ≥99.7
Moisture ≤0.2
Acidity (CH3COOH) ≤0.002
Evaporation residue≤0.005
Hydroxyl content ≤0.05
S.ppm ≤2

IS9001:2008 molecular sieve 5A

1.Performance: High quality and Low price
2. Environmental protection
3. Specifications:according to customer request
TOP QUALITY LOW PRICE , NICE MOLECULAR SIEVE!
molecular sieve 5A for various industry or producing O2.
Shanghai desikenshi Molecular sieve CO.,Ltd

Melocular sieves 5A
Melocular sieve 5A is an alkali alumino-silicate, it is the calcium form of the type A crystal structure.
Molecular sieve 5A has an effective pore opening of about 5 angstroms, it will adsorb molecules with a kinetic diameter of less than 5 angstrom and exclude molecules larger than 5 angstroms.It is especially suitable for PSA adsorber applications where it may be used for the separation of normal-andiso-paraffins(C4 to C6 species)in PSA hydrogen purification and in oxygen concentrators.

property
uint
bead
pellet
note
Diameter
Mm
1.6-2.5
3-5
1/16
1/8
StaticH2O adsorption
%wt
≥21.5
≥21.5
≥21.5
≥21.5
RH10%,25°C
Bulk density
g/ml
≥0.70
≥0.68
≥0.64
≥0.64
settledc
Loss on attrition
%wt
≤0.10
≤0.10
≤0.20
≤0.20

Loss on ignition
%wt
≤1.50
≤1.50
≤1.50
≤1.50
575°C,1H
Crush strength
N
≥30
≥80
≥30
≥70

Partical ratio
%
≥97
≥99

Recommended application:
·The strong ionic forces of the divalent calcium ion makes it an excellent adsorbent to remove water,CO
2
,H
2
S from sour natural gas streams,while decreasing COS formation.It can also adsorbs light mercaptans.It is also used for the separation of normal-and iso-paraffins.
·Production of high purity N
2
,O
2
,H
2
and inert gases from mixed gas streams.

Packing:
·55 gallon air-tight iron drum,and each drum has inner PE bag.
·25 kg/carton,and each carton has inner PE bag.
·other packing according to your requirement.

Instruction:
prevent molecular sieve from exposing directly to the air.
Waring:
molecular sieve adsorption activity is an exothermic reaction,any contact to human body is dangerous.

IS9001:2008 molecular sieves, 3A

1.Performance: High quality and Low price
2. Environmental protection
3. Specifications:according to customer request

TOP QUALITY LOW PRICE, NICE MOLECULAR SIEVE!
molecular sieve 3A IG works in INSULATING GLASS, it adsorbt the humidity.
Shanghai desikenshi Molecular sieve CO.,Ltd
Molecular Formula: 0.6
7
K
2
O
·
0.33Na
2
O
·
Al
2
O
3
·
2SiO
2
·
4.5H
2
O

Melocular sieves 3A
Melocular sieve 3A is an alkali metal alumino silicate, it is the potassium form of the type A crystal structure.
Molecular sieve 3A has an effective pore opening of about 4 angstroms, it adsorbs molecular with effective diameters smaller than approximately 3 angstroms.But excludes molecules such as unsaturated hydrocarbons.

property
uint
bead
pellet
note
Diameter
Mm
1.6-2.5
3-5
1/16
1/8
StaticH2O adsorption
%wt
≥21.5
≥21.5
≥21.5
≥21.5
RH10%,25°C
Bulk density
g/ml
≥0.70
≥0.70
≥0.65
≥0.65
settledc
Loss on attrition
%wt
≤0.10
≤0.10
≤0.20
≤0.20

Loss on ignition
%wt
≤1.50
≤1.50
≤1.50
≤1.50
575°C,1H
Crush strength
N
≥30
≥80
≥40
≥70

Partical ratio
%
≥97
≥99

Recommended application:
·drying of unsaturated hydrocarbons(e.g.ethylene,butadien)
·cracked gas drying.
·drying of natural gas,if COS minimization is essential, or a minimum co-adsorption of hydrocarbons is required..
·drying of highly polar compounds,such as methanol and ethanol.
·static,(non-regenerative)dehydration of insulating glass uints,whether air filled or gas-filled.
·dehydration of refrigerant.

Packing:
·55 gallon air-tight iron drum,and each drum has inner PE bag.
·25 kg/carton,and each carton has inner PE bag.
·other packing according to your requirement.

Instruction:
prevent molecular sieve from exposing directly to the air.
Waring:
molecular sieve adsorption activity is an exothermic reaction,any contact to human body is dangerous.

5A Molecular Sieves for Air Drying

5A Molecular Sieves for Air Drying:
1.High quality
2.Shape:Sphere
3.Excellent adsorbability
4.Reasonable price
5A Molecular Sieves for Air Drying

Molecular Sieve type 5A is an alkali alumino silicate; it is the sodium form of the Type A crystal structure. 5A molecular sieve has an aperture about 5 angstroms (0.5nm).It doesn't absorb any molecules larger than 5A, including propane. It absorbs water, methanol, ethanol, sulfureted hydrogen, sulfur dioxide, carbon dioxide, ethylene, propylene mainly.
Typical Chemical Formula: Na
2
O. Al
2
O
3
. 2 SiO
2
. n H
2
O

Item
Index
Appearance
strip
spherical
Diameters mm
1.5-1.7
3.0-3.3
1.0-1.6
3.0-5.0
Size ratio to grade %
≥98
≥98
≥96
≥96
Bulk density g/ml
≥0.60
≥0.60
≥0.60
≥0.60
Abrasion loss %
≤0.20
≤0.25
≤0.20
≤0.20
Crushing strength N
≥30/CM
≥45/CM
≥60/P
≥70/P
Static water absorption %
≥20.5
≥20.5
≥20.5
≥20.5
Water in packaging %
≤1.5
≤1.5
≤1.5
≤1.5

Application
The strong ionic forces of the divalent calcium ion makes it an excellent adsorbent to remove water, CO2, H2S from sour natural gas streams, while minimising COS formation. Light mercaptans are also adsorbed.
It is also used for the separation of normal- and iso paraffins.
Production of high purity N2, O2, H2 and inert gases from mixed gas streams.

For more details, please feel free to contact with me.

ISO 13X Molecular Sieve Dessicant Powder

ISO 13X Molecular Sieve Dessicant Powder
1.Molecular sieve powder
2.Dessicant powder
3.Supply 13x molecular sieve powder
molecular sieve powder,dessicant powder

Xiamen Honwan Import&Export Co.,Ltd
, is a world famous manufacturer and exporter for 4a zeolite and molecular sieve. During 18 years hard working, we have gained a well-known brand both in and abroad. We have successfully cooperated with
P & G, Liby, Nice, Kao
and some other famed brands.
Our
3A, 4A, 5A,13X Molecuar Sieve
surfactant are white powder, without bad smell, non-polluted and has a strong adsorption.

Adsorbs di-n-butylamine (not tri-n-butylamine). Useful for drying .

Index as follows:

13X Molecular Sieve
Item
Unit
Technical data
Chemical Formula

NaO.Al2O3.2.5SiO2.6.2H2O
Liquid carrying capacity(g/100g)
g
>32
CO2 Capacity
%
>22.5
LOI
%
<24
PH5
%
<11.5
Cl
%
—
K2O
%
—
Bulk Density

0.4

ISO Certificate Sodium dimethyl dithiocarbamate(SDD)

1.Solid - white or gray white crystal
2.90% min
3.manufacture SDD with more than 10years
4.ISO9001:2008

Product:Sodium dimethyl dithiocarbamate

Molecular formula:C3H6NS2Na.2H2O
Molecular weight:179
CAS No.:128-04-1
Property:
Solid - white or gray white crystal.

Specification:

Items
U/T
standard
test result
apperance

white crystal powder
white crystal powder

Odour

Ammonia odour
Ammonia odour
Assay

%
90%min
90%min
Free Alkali

0.1~0.4
0.21
PH(1% solution)

7.5~12.0
10.6
Application:
1. Treatment of industrial waste water
2. Sugar refines industry
3. Chemical industry
4. Heavy metal precipitator
5. paper-making
6. Antiseptic
7. Polymerization inhibitor
8. Rubber vulcanization accelerant, styrene-butadiene rubber terminator.

ISO certified-Sodium gluconate 99.5%

1.Name:Sodium Gluconate
2..Assay:99.5%min
3.Loss on dry:0.50%max
4.Certification:ISO9001,ISO14001,HACCP
5.best price &servic
Applications and Competitive advantages:
1.The
appearance
of sodium gluconate is white crystalline granules or powder,it has a wide range of the Polyhydroxy organic acid salt.
a.
In medicine
,it regulars the balance of acid-base in the human body, to restore nerve function normaly.Sodium gluconate can also effectively prevent the occurrence of hyponatremia syndrom.
b.As a kind of
water stabilizer
, sodium gluconate has excellent corrosion inhibition effect.Such as the circulating cooling water system of petrochemical enterprise, low pressure boiler, engine cooling water system treatment agent.
c. Sodium gluconate can be used as
cleaning agent for iron and steel surface
.
d. It can also
clean all kinds of glass bottle
.
e.
In food
,sodium gluconate is an important
food additive
, In the nutrition growth agent, food preservation agent, quality improvement agent has wide application.
f. As a
reducing agent and retarder in the construction industry
. Sodium gluconate on concrete with auxiliary plasticizing effect of cement, in adding a certain amount of sodium gluconate, can increase the strength and plasticity of the concrete.

2. In addition, sodium gluconate readily biodegradable
used in the textile industry
, as one does not produce pollution environmental friendly chelating dispersing agent.

Testing Result:
Item
Food grade standard
Industry grade standard
Test Result
Appearance
White or yellowish crystal powders
Meet the standard
Solubility
Easily soluble in water, slightly soluble in alcohol and insoluble in ether
Meet the standard
Identitification
Meet the standard
Meet the standard
Meet the standard
Assay,%
98.5min
98
99.5
Loss on dry,%
0.50max
1.0max
0.50max
Reducing substances,%
0.50 max
1.0 max
0.50 max
Sulfate,%
0.05 max
0.2 max
0.05 max
Chloride,%
0.07 max
0.1 max
0.07max
Pb,ug/g
10 max
10 max
10max
Arsenic salt,ug/g
3 max
3 max
3 max
Heavy metals,ug/g
20 max
20 max
20 max
PH
6.0-8.5
6.0-8.5
7.3

ISO9001 Activated Alumina Hongda Supply

Activated Alumina
1.Export experience
2.Sample available
3.Insoluble to water
Activated Alumina

Features:
1). symmetrical particle size,
2). non-poisonous,
3). no smell, odorless,
4). insoluble to water and organic solvents.
Usage:
1). It can be used as deacidificated regenerant of transformer oil and
gas drying of oxygen industry, textile Industry and electronic industry,
and air drying of automatic instrument and meter.
2). It is also used as drying agent and cleaning agent in fertilizer and petrochemical industry.

In one word, it is an efficient drying agent of deep drying in trace water.

Specific indexes as follows:
Serial number
Index projects
Index requirement
1
Appearance
White
2
Particle size (mm)
1.5-2.4 3-5 5-8
3
Intensity (N/ , average value)
Min150
4
Bulk specific weight (g/cm3)
0.7-0.8
5
Pore volume (cm3/g)
Min 0.38
6
Wear rate (%)
Max 0.6
7
Specific surface area (m2/g)
Min 300
8
Sodium oxide content (Na2O, %)
Max 1.0
9
Water absorption rate (%)
Min 50
10
Alumina content (AL2O3)
Min 92
11
Static adsorption capacity % (RH=60)
Min 16.8

ISO9001 White Activated Alumina for Desiccant Made by Hongda

Activated Alumina
1.no smell, odorless
2.insoluble to water and organic solvents
3.size:1.2-2.4,3-5,1-3,5-8mm
Activated alumina
has much micro-paths, so the specific surface is large. It can be used as absorbent desiccant and catalyst carrier. It is also a kind of trace water desiccant and the pole-molecular absorbent, according to the absorbed molecular polarization, the attachment force is strong for water, oxide, acetic acid, alkali etc.
The
big diffrernce

between activarted alumina and the anion exchange resin is the selectivity.The selectivity of activated alumina is much stronger,and its defluorination is good.

The capacity is stable, the absorbed fluorine is 6400g/cm3. It has high strength, low abrasion, no soften in water, no expansion, no powdery, no crack.

At the same time,it can
widely used in
the deep drying of cracked gas, ethylene and propylene, hydrogen-generation, air separation, instrument air drying and fluorine treatment for H2O2, also in the absorbing pollution material, such as H2S, SO2, HF and paraffin in the water gas, especially in the drinking water defluorination

Specific indexes as follows:
Serial number
Index projects
Index requirement
1
Appearance
White
2
Particle size (mm)
1.5-2.4 3-5 5-8
3
Intensity (N/ , average value)
Min150
4
Bulk specific weight (g/cm
3
)
0.7-0.8
5
Pore volume (cm
3
/g)
Min 0.38
6
Wear rate (%)
Max 0.6
7
Specific surface area (m
2
/g)
Min 300
8
Sodium oxide content (Na
2
O, %)
Max 1.0
9
Water absorption rate (%)
Min 50
10
Alumina content (AL
2
O
3
)
Min 92
11
Static adsorption capacity % (RH=60)
Min 16.8

ISO9001:2000 metal pall ring

20 years professional manufacturer
high quality as competitive price
Lower pressure drop
Good liquid/gas distribution
Metal Pall Ring
Packing is well known packing after rasing ring,an industry standard design media which used in many applications,widely used in all kinds of separation, absorb plants, constant decompress plants, compounding ammonia plant, decarbonization , desulfuration ,separation of ethylbenzene, separation of isooctane/ methylbenzene, Absorption, Aeration, Degassing, Desorption, Distillation, Stripping, Heat Recovery, Extraction, Various separation and absorption applications at atmospheric pressure and under vacuum, where a low pressure drop is critical,H2S, NH3 & SO2 Absorption & Stripping, Steam Stripping, Quench towers, Direct contact cooling.

JinCheng Metal Pall Ring
is an industry standard design media deveoped from Metal Pall Ring and is used widely in varieties of applications.

Material:
Metal Pall Rings are available in a wide range of materials such as stainless steel ,carbon steel ,aluminum, bronze,304L,316L,and other alloy etc.

Advantage:
Lower pressure drop
Good liquid/gas distribution and higher mass transfer efficiency versatility,easily wettable, high resistance to fouling ,high temperature.
High Mechanical strength ,suitble for depper beds
Good liquid/gas distribution and higher mass transfer efficiency versatility

Application:
Absorption , Aeration,Degassing, Desorption ,Distillation, Stripping.Heat Recovery , Extraction etc.

Name
Size
Diameter x Heightx Thickness mm
Surface area m²/ m
3
Void space %
Bulk density kg/ m
3
No,per m
3
Packing factor m-1

Pall ring
Φ 16
16x16x0.4
239
92.8
365
205000
299
Φ 25
25x25x0.6
219
93.4
427
55900
269
Φ 38
38x38x0.8
129
94.5
365
13000
153
Φ 50
50x50x1.0
112.3
94.9
395
6500
131
packing:super sack, etc.

ISO9001:2008 3A Molecular Sieve

Molecular Sieve
1.we are the manufacturer , best quality as the low price.
2.8 years experience in producing.
3.ISO9001:2008
Molecular Sieve 3A

Applications:
it is used for commercial dehydration of unsaturated hydrocarbon streams as cracked gas,acetylene,propylene,and butadiene.lt is also used for dehydration of alcohol and solvents
.
Specifications

Properties
Measure Unit
Spherical
Cylindrical
Diameter
mm
1.6-2.5
3-5
5-8
1.6
3.2
Static Water Adsorption
≥mg/g
210
210
210
210
210
CO
2
Adsorption
≤%wt
2.0
2.0
2.0
2.0
2.0
Bulk Density
g/ml
0.70±0.02
0.68±0.02
0.66±0.02
0.68±0.02
0.66±0.02
Crush Strength
≥N
30
80
110
35
70
Wear Rate
≤%wt
0.1
0.1
0.1
0.2
0.2
Package moisture
≤%wt
1.0
1.0
1.0
1.0
1.0

ISO9001:2008 4A Molecular Sieve

Molecular Sieve
1.we are the manufacturer,best quality as the low price.
2.8 years experience in producing.
3.ISO9001:2008
Molecular Sieve 4A

Applications:
lt is mainly used as a dryer and purificant for various gases and liquids,such as refrigerant,medicine,electronic materials and changeable substance,purification of argon gas.

Specifications
Properties
Measure Unit
Spherical
Cylindrical
Diameter
mm
1.6-2.5
3-5
5-8
1.6
3.2
Static Water Adsorption
≥
mg/g
215
215
215
215
215
Methanol Adsorption
≥
mg/g
140
140
140
140
140
Bulk Density
g/ml
0.70±
0.02
0.68±
0.02
0.66±
0.02
0.68±
0.02
0.66±
0.02
Crush Strength
≥
N
35
80
140
32
80
Wear Rate
≤
%wt
0.1
0.1
0.1
0.2
0.2
Package Moisture
≤
%wt
1.0
1.0
1.0
1.0
1.0

ISO9001:2008 4A-DG Molecular Sieve

Molecular Sieve
1.we are the manufacturer,best quality as the low price.
2.8 years experience in producing.
3.ISO9001:2008
Molecular Sieve 4A DG
Applications:
lt is used commercially in deep drying natural gas alkane,it is also used for dehydration of various gases and liquids,refrigerant,medicine, electronic components and changeable substance,purification of argon gas.
Specifications

Properties
Measure Unit
Spherical
Cylindrical
Diameter
mm
3-5
1.6
3.2
Static Water Adsorption
≥mg/g
215
215
215
Methanol Adsorption
≥mg/g
140
140
140
Bulk Density
g/ml
0.68±0.02
0.66±0.02
0.66±0.02
Crush Strength
≥N
100
40
80
Wear Rate
≤%wt
0.1
0.2
0.2
Package Moisture
≤%wt
1.0
1.0
1.0

ISO9001:2008 5A Molecular Sieve

Molecular Sieve
1.we are the manufacturer , best quality as the low price.
2.8 years experience in producing.
3.ISO9001:2008
Molecular Sieve 5A
Applications:
Used commercially in drying and refining air,petroleum,natural gas and gas in other industries.
Specifications
Properties
Measure Unit
Spherical
Cylindrical
Diameter
mm
1.6-2.5
3-5
5-8
1.6
3.2
Static Water Adsorption
≥
mg/g
210
210
210
210
210
n-hexane Adsorption
≥
mg/g
120
120
120
120
120
Bulk Density
g/ml
0.72±
0.02
0.70±
0.02
0.68±
0.02
0.68±
0.02
0.66±
0.02
Crush Strength
≥
N
35
80
130
35
70
Wear Rate
≤
%wt
0.1
0.1
0.1
0.2
0.2
Package Moisture
≤
%wt
1.0
1.0
1.0
1.0
1.0

5A Zeolite Molecular Sieve for PSA Oxygen Concentrator

Superior Quality, Competitive Price,specially suitable for PSA adsorber applications.
Best molecular sieves for PSA adsorbing.

Introduction:
5A Molecular Sieve is a kind of alkali aluminosilicate and able to adsorb molecules with their critical diameters no more than 5A.It is the competitive product for PSA adsorber applications.Type 5A has an effective pore opening of 5 angstroms (0.5 nm). It will adsorb molecules with a kinetic diameter of less than 5 Angstrom and exclude those larger.
It is especially suitable for PSA adsorber applications where it may be used for the separation of normal- and iso- paraffins (C4 to C6 species), in PSA hydrogen purification and in oxygen concentrators.
Applications:
a) Used for separating normal paraffin from branched hydrocarbon and cricoid hydrocarbons through selective adsorption
b) Widely used for the separation of normal paraffin and isoparaffin
c) Molecules can be adsorbed by molecular sieve 3A, and 4A could be adsorbed by the molecular sieve 5A
d) N
2
-O
2
separate, N
2
-H
2
separate
Formula: 3/4 CaO·1/4Na
2
O·Al
2
O
3
·2SiO
2
·9/2H
2
O
Specification:
Item
unit
target
Shape

pellet
Sphere
Diameter
mm
1.5-1.7
3.0-3.3
1.7-2.5
3.0-5.0
Bulk density
g/ml
≥0.72
≥0.72
≥0.75
≥0.72
Abrasion rate
%
≤0.25
≤0.25
≤0.25
≤0.25
Crushing strength
N/p
≥30
≥45
≥60
≥70
C
4
H
10
capacity
ml/g
9.4
9.4
9.4
9.4
Water adsorption
%
≥20.5
≥20.5
≥20.5
≥20.5
Packing water
%
≤1.5
≤1.5
≤1.5
≤1.5
Packing:
By carton box, each box 30kg or 25kg, inside airtight bag.
Or 40kg/sealed iron drum, inside airtight bag.

Attention
To avoid damp and pre-adsorption of organic before running, or must to be reactivated.

website: www.tower-packing.cn

ISO9001:2008 Activated Alumina Hydrogen peroxide

1.we are the manufacturer , best quality as the low price
2.8 years experience in producing.
3.ISO9001:2008 is certificated
Activated Alumina(sphere) HL-MS1
Crystal Form:
γ—Al2O3
Chemical and Physical Property:
A white and porous sphere,Characterized with long durability, insoluble in water and organic solvents, such as hydrocarbon, alcohol and ester,etc.Non-toxic,tasteless,odorless and no powdering and soften in water and alkaline solutions.
It’s an ideal adsorbent for hydrogen peroxide because of its special recovering capability to decompose the derivatives of anthrone and stabilize the operating liquor.Aim to be regenerated,the alumina for hydrogen peroxide has good mechanical performance, with low active variability after recovering. Activated Alumina(sphere) HL-MS1(Particle size could be porcessed to order)

Specifications
Target Name
Diameter
Al
2
O
3
%
SiO
2
%
Fe
2
O
3
%
Na
2
O %
L.O.I %
Bulk Density g/ml
BET m
2
/g
Porosity Volume ml/g
Crushing Strength N/piece
Technical requirements
3-5mm
≥92
≤0.10
≤0.04
0.50-0.90
≤8.0
≤0.75
≥240
≥0.40
≥50
4-6mm
≥92
≤0.10
≤0.04
0.50-0.90
≤8.0
≤0.75
≥240
≥0.40
≥60
Al
2
O
3
=100-(SiO
2
+Fe
2
O
3
+Na
2
O+L.O.I)

ISO9001:2008 Molecular Sieve 4A-DG

1.we are the manufacturer,best quality as the low price.
2.8 years experience in producing.
3.ISO9001:2008 is certificated.
Molecular Sieve 4A DG
Applications:
lt is used commercially in deep drying natural gas alkane,it is also used for dehydration of various gases and liquids,refrigerant,medicine, electronic components and changeable substance,purification of argon gas.
Specifications

Properties
Measure Unit
Spherical
Cylindrical
Diameter
mm
3-5
1.6
3.2
Static Water Adsorption
≥mg/g
215
215
215
Methanol Adsorption
≥mg/g
140
140
140
Bulk Density
g/ml
0.68±0.02
0.66±0.02
0.66±0.02
Crush Strength
≥N
100
40
80
Wear Rate
≤%wt
0.1
0.2
0.2
Package Moisture
≤%wt
1.0
1.0
1.0

ISO9001:2008 Molecular Sieve 5A

1.we are the manufacturer , best quality as the low price.
2.8 years experience in producing.
3.ISO9001:2008 is certificated.
Molecular Sieve 5A
Applications:
Used commercially in drying and refining air,petroleum,natural gas and gas in other industries.
Specifications
Properties
Measure Unit
Spherical
Cylindrical
Diameter
mm
1.6-2.5
3-5
5-8
1.6
3.2
Static Water Adsorption
≥
mg/g
210
210
210
210
210
n-hexane Adsorption
≥
mg/g
120
120
120
120
120
Bulk Density
g/ml
0.72±
0.02
0.70±
0.02
0.68±
0.02
0.68±
0.02
0.66±
0.02
Crush Strength
≥
N
35
80
130
35
70
Wear Rate
≤
%wt
0.1
0.1
0.1
0.2
0.2
Package Moisture
≤
%wt
1.0
1.0
1.0
1.0
1.0

ISO9001:2008 Type 3A Molecular Sieve

ISO9001:2008 Type 4A Molecular Sieve

ISO9001:2008 Zeolite Molecular Sieve 4A

ISO9001-2008 standard:PAM used in many usage (IVY)

Polyacrylamide
1.Cationic Polyacrylamide
2.Polymer
3.Wastewater Treatment Chemical
Polyacrylamide

Polyacrylamide is a water soluble high-molecular polymer with a wide scope of usage.
uniform granule,good solubility
Specification
Cationic Polyacrylamide
ITEM
MOLECULAR WEIGHT
CATIONIC DEGREE
C8015
MEDIUM HIGH
LOW
C8020
MEDIUM HIGH
MEDIUM LOW
C8030
MEDIUM HIGH
MEDIUM HIGH
C8040
MEDIUM HIGH
HIGH
C8050
MEDIUM HIGH
ULTRA HIGH
C1205
LOW
HIGH
C1260
HIGH
ULTRA HIGH
C6040
MEDIUM
MEDIUM HIGH
C6050
HIGH
MEDIUM

ISOCYANURIC ACID

The Isocyanuric Acid iswhite crystalline solid powder or granular, non-toxic and odorless.

1.PROPERTIES:
Molecular Formula
: C3H3N3O3
Molecular Weight
: 129.1
Cas No
:108-80-5
HS NO:
2837.1990

2. Usage:
The Isocyanuric Acid is
white crystalline solid powder or granular, non-toxic and odorless. CA is widely used for the stabilization of available chlorine swimming pool water treatment, and also the starting compound for the synthesis of many organic derivatives.

One of its major applications is for the production of Sodium Dichloro isocyanurate Acid and Trichloroisocyanuric Acid.

3.SPECIFICATIONS
Item
Value
Content:
98.5% min
PH:
2.8

Ignited Residue
0.1% max

For More information, pls feel free to contact with us.

Thanks.

IT BAST HDLL powder activated carbon - wood based

ISO9001:2000
Non poisonous & smell
Large specific surface area
Good adsorption ability
Wood based powder activated carbon
A.Application:
1.Water purification industry(sugar made, pharmacy made, soft drink, alcohol made, foodstuff, paper made, chemical.
2.Decolorization, deodorization, refine of organism solvent.
B.Services.
1. Developed porosity structure ensured good adsorption ability.
2. High mechanical strength ensured long circle time.
3. ISO9001:2000
4. 18 years specialized in activated carbon made.
Note: as manufacturer , customerized specifications are available.
C.Physical and chemical property
Test Item
Test Data
Iodine value
900mg/g
Specific surface area
Min 1000m2/g
PH range
5-7
Methylene blue adsorption value
Min 120mg/g
Moisture content
5%

]

Ideal 4A Zeolite Filter Media

Zeolite Filter
1.ISO9001
2.high exchange capacity
3.strong adsorption
4.lower cost&better service
Zeolite filter
1. Natural clinoptilolite filter Natural zeolite
is aluminosilicate, the appearance is white or bolarious.
It belongs to weakly acidic cationic exchange agent. After add the activated component, make it has better ion exchange or adsorption ability, and the adsorption energy also increase accordingly.
This kind of filter is mainly used for small boiler water conditioning, removing the calcium,magnesium ions in the water, in order to reduce the boiler scale formation and less the corrosion, at the same prolong the service life of the boiler.
In the waste water treatment, it can wipe off phosphorus, lead and hexavalent chromium. Invalided zeolite can be also used concentrated brine counter-current.
Natural clinoptilolite filter's chemical and physical index:

Proportion(g/cm3)
2.2-2.6
Silt Content%
≤1.0
Volumeweight(g/cm3)
1.6
Moisture%
≤1.5
Ware Rate%
<1.0
Sodium ion Exchange Ability
≥800

2. Activation zeolite filter Activation zeolite filter
is made by the natural zeolite after special activation.
The adsorption ability and the ion exchange capacity is better than the natural zeolite.
It is not only dislodge turbidity, chroma and peculiar smell, but also can adsorb harmful metals in the water(chrome, cadmium, nickel, zinc, mercury, iron ions) and organic in the water(phenol, phosphate radical ion). This product is conductive to dislodge various micro pollutants and has no harmful substances.
Therefore, activation zeolite filter is the ideal material for industrial water, waste water treatment and tap water filtration.

Performance Analysis:

Density g/cm3
1.8-2.2
Filtering Velocity m/h
4-12
Volumeweight g/cm3
1.4
Wear Rate%
<0.5
Pore Ratio%
≥50
Broken Rate%
<1.0
Specific Surface Area m2/g
500-800
Silt Content%
<1.0
Hydrochloric Acid Solute Rate%
≤0.1
All Exchange Work Capacity mg/g
2.2-2.5

5A molecular sieve for separation of paraffins

1.strong ionic forces
2.effective pore opening of 5 angstroms (0.5 nm)
3.especially suitable for PSA adsorber applications
Outlines:
Molecular Sieve type 5A is an alkali alumino silicate; it is the calcium form of the Type A crystal structure. Type 5A has an effective pore opening of 5 angstroms (0.5 nm). It will adsorb molecules with a kinetic diameter of less than 5 Angstrom and exclude those larger. It is especially suitable for PSA adsorber applications where it may be especially suitable for PSA adsorber applications
Typical Chemical Formula:
0.7 CaO . 0.3 Na2O . Al2O3 . 2 SiO2 . n H2O

Application
:
The strong ionic forces of the divalent calcium ion makes it an excellent adsorbent to remove water, CO2, H2S from sour natural gas streams, while minimising COS formation. Light mercaptans are also adsorbed.
It is also used for the separation of normal- and iso paraffins.
Production of high purity N2, O2, H2 and inert gases from mixed gas streams.

Regeneration
:
Molecular sieve Type 5A can be regenerated by either heating in the case of thermal swing processes; or by lowering the pressure in the case of pressure swing processes.
To remove moisture from a 5A molecular sieve, a temperature of 250-300°C is required. A properly regenerated molecular sieve can give moisture dew points below -100°C, or mercaptan or CO2 levels below 2 ppmv.
The outlet concentrations on a pressure swing process will depend on the gas present, and on the conditions of the process.
5A - Zeolites are available in beads of 1-2 mm, (10x18 mesh) 2-3 mm, (8x12 mesh) , 2.5-5 mm, (4x8 mesh) and as powder, and in pellet 1.6, 3.2.

Please ask for separate data sheets.

Package:
30kg or 25kg carton box, inside bag vacuum packing
Or 120kg-150kg iron drum, inside bag vacuum packing
Other package request by the customers.
Attention
To avoid damp and pre-adsorption of organic before running, or must to be reactivated.

Impregnated activated carbon for air purification

Impregnated activated carbon for air purification
Diameter 4.0mm
Iodine Number 950mg/g
Moisture 15% CTC 60%
Impregnated activated carbon for air purification
This product is made from high quality Anthracite coal, By KOH solution impregnationit, is used for air purify.
Characteristics: Large surface area, high pore volume, strong absorption capacity, high efficiency.

Specification
HN4060KO
Diameter
4.0mm or 3.0mm
Iodine Number
≥950mg/g
Bulk density
before impregnant:450+/-20g/l,after:600+/-20g/l
Moisture
≤15%
Ash Content
≤12%
CTC
≥60%
H2S adsorption capacity
0.1g/cc
SO2 adsorption
5% min

Improved Polyhedral Hollow Ball water treatment

It is mainly apply in Removal CO2 and water seperator equipment
water treatment
Based on its orginal structure and re-sign of Zhejiang University of Technoloy, 12 flabellate-shape vanes were distribute on each hemisphere. According to our customers feedback of this products quality, we have changed wavy flabellate-shape vane instead of flabellate-shape vane. Its inner structure will improve contacting area of liquid & medium. It is widely apply in removal charcoal and water separator equipment.

Size
mm
Specific area
m
2
/m
3
Void rate
%
Bulk number
Pieces/m³
Bulk Density
Kg/m³
Φ25
118
84
64000
70.4
Φ38
186
87
25000
75
Φ50
237
90
11500
80.5
Φ76
214
92
3000
59
Φ100
261
92
1800
50.4

Industrial Micro-Biocide

Micro-biocide used for waste water treatment, paper, coatings, textile fiber production, adhesives.metal cutting fluids,etc
It is a high effective industry micro-biocide newly developed by Suny Fine. It can effectively kill bacteria and inhibit the growth of microbe. It is widely used in waste water treatment, pulp & paper production, textile fiber production, coatings & paint production, adhesives, metal cutting fluids, etc.

* Effectively kill bacteria and inhibit microbe growth;
* Well compatible with application systems;
* Harmfulless, no side-effects;
* Low consumption, effective bactericide.

Industrial Molecular Sieves 4a

1) 30 years experience
2) Chemical content: Na2O . Al2O3 . 2 SiO2 . n H2O
3) Bulk density:0.6~0.7g/ml
Outlines:
4A Molecular Sieve

is an alkali alumino silicate; it is the sodium form of the Type A crystal structure. 4A molecular sieve has an effective pore opening of about 4 angstroms (0.4nm). XINTAO type 4A molecular sieve will adsorb most molecules with a kinetic diameter of less than 4 angstroms and exclude those larger. Such adsorbable molecules include simple gas molecules such as oxygen, nitrogen, carbon dioxyde and straight chain hydrocarbons. Branched chain hydrocarbons and aromatics are excluded.

Typical Chemical Formula:
Na2O . Al2O3 . 2 SiO2 . n H2O

Application
:
Drying and removing of CO2 from natural gas, LPG, air, inert and athmospheric gases, etc.
Removal of hydrocarbons, ammonia and methanol from gas streams.
(ammonia syn gas treating)
Special types are used in the air break units of buses, trucks and locomotives.
Packed in small bags, it may be used simply as a packaging desiccant.

Regeneration:
Molecular sieve Type 4A can be regenerated by either heating in the case of thermal swing processes; or by lowering the pressure in the case of pressure swing processes.
To remove moisture from a 4A molecular sieve, a temperature of 250-280°C is required. A properly regenerated molecular sieve can give moisture dew points below -100°C.
The outlet concentrations on a pressure swing process will depend on the gas present, and on the conditions of the process
4A - Zeolites are available in beads of 1-2 mm, (10x18 mesh) 2-3 mm, (8x12 mesh) , 2.5-5 mm, (4x8 mesh) and as powder, and in pellet 1.6, 3.2.
Please ask for separate data sheets.
Package:
30kg or 25kg carton box, inside bag vacuum packing
Or 120kg-150kg iron drum, inside bag vacuum packing
Other package request by the customers.
Attention:
To avoid damp and pre-adsorption of organic before running, or must to be reactivated.

Industrial dairy water treatment anionic polyacrylamide

dairy industry water treatment
Cationic polyacrylamide(C-PAM)
CAS: 9003-05-8
M.F.: (C3H5NO)n
dairy industry water treatment

Cationic polyacrylamide
mainly used in urban sewage treatment, paper industry, food processing industrym petrochemical industry, mill run industry, dyeing industry and sugar industry and so on.
Packing:
25kg in a mutilayer bag
Use
(1) Sludge dewatering.
(2) Domestic and organic water treatment: It is positive in charge in the acid, neutral and alkaline medium.
(3) The intensifier in the paper –making industry.
(4) It can be used as the additive chemicals in the oil field.

Specification:
Molecular weight (×100
2
)
≥500
≥600
≥700
≥800
Solid content (%)
≥90
≥90
≥90
≥90
Ionic degree (20%-80%)
20-45
45-55
55-60
65-80
Residual
monomer (%)
0.05-0.1
0.05-0.1
0.05-0.1
0.05-0.1
Dissolution time(min)
≤50
≤50
≤50
≤50
Intrinsic Viscosity (dl/g)
≥8
≥8
≥8
≥8
Appearance
White powder/granule

Industrial poly aluminium chloride 23.5%

1.Name:poly aluminium chloride 23.5%,
2.Used as water treatment industry,
3.We can offer best quality,
4.We are factory...
1.Name:
poly

aluminium

chloride

23.5%
,
2.Used as water treatment industry,
3.We can offer best quality,
4.We are factory...
Procut:: Polyaluminium Chloride PACPolyaluminium Chloride (PAC)

Molecular formula: [AL2 (OH) LnCL6-n] m
Appearance:
Yellow Powder or Particles
Specification:
Iteam
Details
Alumina(AL
2
O
3
) mass fraction/%≥
30
29
Basicity /%
60-85
40-80
Density(
20
°C
)/(g/cm
3
) ≥
1.15
1.12
Insol. In water mass fraction/%≤
0.5
0.6
PH(1% aqueous solution)
3.5-5.0
3.5-5.0
Arsenic(As) mass fraction/%≤
0.5ppm
0.0006
Lead(Pb) mass fraction/%≤
3ppm
0.003
Cadmium(Cd) mass fraction/%≤
1ppm
0.0006
Hydrargyrum (Hg) mass fraction/%≤
0.02ppm
3ppm
Hexavalent chrome(Cr+6) mass fraction/%≤
1.5ppm
0.0015
1. In woven plastic bag lined with plastic bag, net wt.25kg,20-22MT/20'FCL
H.S. Code:
3824909000

Industrial waste water treatment---Anionic PAM

1.acrylamide
2.with high molecular weight
3.as water treatment chemical

Anionic Polyacrylamid

Description:
It is an important water-soluble compound with the properties of flocculation,thickening,cut-resisting,block-reducing dispersing,etc ..These properties are varied with different derivative ions.So it is widely used in the field of oil extraction,mining selection,coat washing,metallurgy,chemical,papermaking,sugar refining,pharmaceutical,environment protection,construction materials and agriculture.

Specification:
1.Appearance: white granular powder
2.Molecular weight(million): ≥18
3.Water insoluble(wt%): ≤0.1
4.Ion degree(%):≤5
5.Dissolving speed ( H): ≤ 2
6.Residual monomer (%): ≤ 0.1
7.Solid content(%): ≥ 88

Application:
It is mianly used in the field of oil extraction, mining selection ,coat washing, metallurgy, chemical, papermaking, sugar refining,pharmaceutical,environment protection,construction materials and agriculture.

About us :
Our company is well known as a reliable manufacture, mainly producing water treatment materials, such as Polyaluminium Chloride (PAC),PAM including APAM (Anionic Polyacrylamide) and CPAM (Cationic Polyacrylamide),
and activated carbon series ,i.e. Coconut shell activated carbon, nut shell activated carbon,
coal columnar activated and powder activated carbon .
If you need any of our products ,please feel free to contact us.
Thanks for your attention!

Industrial waste water treatment---Anionic PAM

Anionic PAM
1.Industrial Waste water treatment
2.Oil displacing agent
3.Well drilling mud raw materials
4.Paper making
Industrial waste water treatment---Anionic PAM
Polyacrylamide Technical Indicators
Performance Indicators of Anionic-polyacrylamide: (Enterprise Standard: Q/AJC002-2006)
Trademark
Molecular Weight (million)
Degree of Hydrolysis
Solid Content%
Effective PH Range
Residual Monomer Content%
wh-10**
20-30 (adjustable)
35-45 (adjustable)
>90%
5-14
<0.05
wh-20**
18-26 (adjustable)
30-40 (adjustable)
wh-30**
15-25(adjustable)
25-35 (adjustable)
wh-40**
10-20 (adjustable)
15-30 (adjustable)
wh-50**
8-20 (adjustable)
10-25(adjustable)
wh-60**
5-16 (adjustable)
6-20 (adjustable)
wh-70**
5-15 (adjustable)
6-15 (adjustable)

Industrial waste water treatment---Anionic PAM

Main Application
Oil-displacing agent of oil field tertiary oil recovery
:
It can adjust the rheology of filled water, increase the viscosity of driving liquid, improve water drive wave and efficiency, lower water phase permeability in ground layer, and enable water and oil to flow forward at even speed. Its effect is that it is mainly used in tertiary oil recovery of oil fields in the aspect oil production, and raw oil of about 100 to 150ton more can be produced through filling the macromolecule polyacrylamide product one ton.
Well drilling mud raw materials
:
in oil field exploration and development and exploration of geology, water and coal, it is used as adhesive of well drilling mud raw materials, can improve the service life of drill bits, improve the drill speed and drilling footage, and reduce plug in replacing drill, and has prominent well slough preventing effect, and it can be used as fracturing fluid of oil fields or plugging agent of controlling profile and plugging water.
Industrial Waste Water Treatment
:
It has the best effect in particular in processing sewage water with suspended particulate, thicker size, high concentration, positive charge particle, neutral or alkalescence water PH value, waste water of iron and steel plants, waste water of electroplating factory, metallurgy waste water, coal washing waste water and other waste water.
Drinking Water Treatment
:
Water sources of many tap water factories in China come from rivers, the sand and mineral contents are higher, water is muddy, the water still can not achieve demands although passing through sedimentation and filtration, and flocculating agent needs adding; however huge adding amount generates increased mud amount and bad effect. The adding amount is only 1/50 of inorganic flocculating agent if anionic-polyacrylamide is adopted as flocculating agent, but the effect is several times better than the organic flocculating agent, and even dozens of times. If the river water with severe organic matter pollution can be matched with anionic-polyacrylamide for use, the effect will be better.
Paper-making adhesive
:
The product can be used as fining agent, residency agent, filtration aid and paper dry and wet intensity reinforcing agent in paper-making industry.
The product can be used as sugar juice fining agent in sugar making industry.
The product also can be used as adhesive and caking agent in aquatic feed.

Friday, September 2, 2011

Industrial waste water treatment--PAM

Industrial waste water treatmentis the best solution to waste water of iron and steel plants, waste water of electroplating
Industrial waste water treatment is used in industrial sewage treatment. It is of much more effectiveness in the sewage treatment, especially in the sewage featuring in suspended particles, coarse, high concentration, particle with positive charge and sewage with neutral or basic PH value, such as the waste water from steel plant, electroplating factory, metallurgical factory, coal washery and so on.

Industrial water treatment chemicals apam Anionic pam

treatment chemicals
1)white granular or powder
2)High efficiency
3)reasonal Price, best quality
4)Certificate:ISO9001:2000
Industrial water treatment chemicals apam Anionic pam

Anionic polyacrylamide according to different uses and users of the product performance requirements, can choose to use different molecular weight.

1)Used for an industrial waste water transaction, especially for suspend grain, thicker, concentration higher - and shot son tape positive electricity Benelux, the PH value of water is like steel and iron works waste water for sewage of the neutral work alkaline, the plating plant waste water, metallurgy waste water, wash wastewater treatments like coal waste water, etc effective.

2) Drinking water treatment. Many water plants less water from the river mud and mineral content is high, more turbid, was going through the sedimentation process, but still below standard, adding flocculants needed to make the water clean . is less than 0.05%,is equal to the advanced level in the world. And it is more suitable to drinking water treatment.

3) Used as a starch factory and the loss of starch and ethanol plant recovery

4) For oil water plugging agent profile, tertiary recovery of oil displacement agent.

5) For paper auxiliaries agent. It has many kinds of advantages in paper making. It can be used as Paper dispersant, wet and dry enhancers, retention, filter aid and paper wastewater flocculants.

specification
Trademark
Molecular weight
(million)
Solid content
(%)
PH
Degree of
Hydrolysis(%)
Residual monomer
Content(%)

JL-A01
3
88
1-14
20-25
≤0.05
JL-A02
6
88
1-14
23-25
≤0.05
JL-A03
8
88
1-14
23-25
≤0.05
JL-A04
10
88
1-14
23-25
≤0.05
JL-A05
12
88
1-14
25-27
≤0.05
JL-A06
15
88
1-14
25-27
≤0.05
JL-A07
18
90
1-14
25-27
≤0.05
JL-A08
20
90
1-14
27-30
≤0.05
JL-A09
24
90
1-14
27-30
≤0.05

We are confident to provide the best products and service. Please feel free to contact us if you are interested in any of our products. We are honored to have the opportunity of establishing a business relationship with your esteemed company.
Thank you for your attention!

5AAAAA HDLL Coal based activated carbon Desulfurizer

Desulfurizer, mainly be used for removal of H2S in pipeline gas, water gas, semi-water gas, coke oven gas, methane(biogas).
Desulfurizer
, activated ferric oxide desulfurizer, mainly be used for removal of H
2
S in pipeline gas, water gas, semi-water gas, coke oven gas, methane(biogas).
Advantages
:
1), Desulfurization rate:
when H
2
S content at entrance is 2000mg/Nm
3
, the value of outlet gas is H2S max 5mg/Nm
3
2), Sulfur Removal Volume: 6-8% per time;
3), Intensity & Water Resistance:
this desulfurizer would not become mudding after boiling it 2 hours or soaking it 15 days in water. It's activity and intensity are still same as before when dried.
Working Principle
:
Fe2O3*XH2O+3H2S==Fe2S3*XH2O+3H2O (Desulfurization)
Fe2S3*XH2O+3/2O2==Fe2O3*XH2O+3S (renewed)

Note: as manufacturer, customized specifications are available.
Our advantages:
1. ISO 9001:2000, Food grade authentication
2. Supply seaworthy double package
3. Timely shipment
4. You will know every step of the progress.
5. Pictures of the goods before the shipment.
6. Manufacturer in this line for 18 years
7. Export experience
8. Sample available

Industry grade Guar Gum powder

Industry grade hydroxypropyl Guar Gum powder for oilfield

Industry grade hydroxypropyl Guar Gum powder

Inhibitor

1.Chemical Agent Inhibitor T-602
2.excellent corrosion and scale inhibition effect
Chemical Agent InhibitorT-602
1.Phosphonic acid, carboxylic acid copolymer is currently the most widely used one of polycarboxylic acid type water treatment chemicals can be used alone, but also with organic phosphonates and organic phosphate ester, poly-phosphate compound .This product is an organic phosphonic acid compound material.It is not easy to dissociated because of the existance of C-P bond.It has good properties in Corrosion and scale inhibition, it is widely used.This product can be used in Oil field water injection and cooling water.

Inhibitor

Chemical Agent Inhibitor T-602
excellent corrosion and scale inhibition effect
Chemical Agent InhibitorT-602
Phosphonic acid, carboxylic acid copolymer is currently the most widely used one of polycarboxylic acid type water treatment chemicals can be used alone, but also with organic phosphonates and organic phosphate ester, poly-phosphate compound to use, better synergies can be in multiples of alkaline and high concentration without scale sediment used for power plants, steel mills, chemical plants, fertilizer plants, refineries and air conditioning systems, cooling water system to prevent them from scaling.

Inorganic PAC

PAC shows the features of low impurity, high molecula weight, and superior coagulating effect.
Polyaluminum Chloride (PAC) or also known as Alkaline Aluminum Chloride is a water-soluble inorganic macromolecule polymer that is intervenient with ALCL3 and AL(OH)3. Its molecular formula is [AL2(OH)NCL6-NLm]. The m in the formula represents Polymerization and n for Neutralization. It is a type of vitreous solid with colors varying from yellow, light yellow, dark brown, and heavy gray and has a strong bridgework absorbance.
The basic difference between PAC and other traditional products is that the traditional ones are electropositive with small molecular and crystalloids. PAC has the structure of many Hydroxy Polymers with various different shapes. Its strengths are high speed deposition, wide range of PH value, does not cause harm to equipment, a great water purifier, clears up SS, COD, BOD, and heavy metal ions like AS with high efficiency.
Pac is commonly used in drinking water, waste water, and industrial water.
Methods on how to use Pac is as following
:
1: add the solid PAC with water with the percentage of 1:3, then dilute it to whatever concentration you desire with 10-30 times the amount of water
2, based on the turbidness of the raw water, decide the best quantity of Pac to put into the water, when the turbidness of the raw water is 100-500mg/g, the best quantity too add is 10-20kg.
Package, transport then store.
1, the liquid product is packaged in a plastic barrel or a plastic trough, and stored either a cement trough or plastic trough.
2, the solid product is packaged in a plastic bag with double layers and sealed well, so that the plastic pellicle bag is on the inside and the plastic intertexture is on the outside. The net weight per bag is 25kg.
3, the solid product can absorb the water easily, but there is no effect in using Pac because of absorbing. we suggest that you store it in a place that is both dry and ventilated place.
4, warning: this product can not be stored together with other toxic and/or harmful chemicals.
Quality index Grade
Drinking water Industry water

Inorganic PAC

Our PAC is an organic macromolecular coagulant widely used in industrial water purification.
Usage: PAC can be used as a flocculant for all types of treatment,drinking
water,industrial waste water,urban waste and in the industry.
Features:Compared with other coagulants,this possesses the following advantages.
1.Wider application, better adaptation.
2.Quickly shape big alum bubble,and with precipitation.
3.Better adaptation to PH value(5-9),and little declining range of PH value and alkalinity
of after treatment.
4.Keeping stable precipitation effect at lower temperature.
5.Higher alkalization than other salt and salt,and little erosion

Insulating glass 3A molecular sieve

Botu 3A molecular sieve:Stable moisture-absorption speed and relatively large absorption capacity of moisture and sulfide
Botu 3A molecular sieve:a potassium-exchanged form of the type a molecular sieve, is an alkali metal aluminosilicate. 3A adsorbent will adsorb molecules with critical diameters up to 3 angstroms type.

3A Used in Dehydration of many kinds of liquids (say ethanol)
Dehydration of air
Dehydration of refrigerants
Dehydration of natural gas or methane
Dehydration of cracked gas, ethylene, propylene or butadiene

No.
Item
Index
1
Appearance
Spherical
2
Bulk Density (g/ml) ≥
0.70
3
Static moisture-adsorbing capacity(RH75%,25
o
C) ≥
35.0
4
Grain diameter (mm)
0.5-0.9
1.0-1.5
1.5-1.7
1.7-2.0
5
Compressive Resistance Strength( N/ grains ) ≥
5
10
15
20
6
Dust (NTU ) ≤
20
7
Moisture-adsorbing velocity(mg/g.min) ≤
0.50
8
Static nitrogen-adsorbing capacity(mg/g) ≤
2.0
9
Delta T (
o
C)
35
10
Granularity qualification rate(%) ≥
96.0
11
Moisture content of packaged product(%) ≤
2.0

Iodine >1000 Activated carbon for Air purification with high adsortion capacity

High wear resistance strength
High temperature and pressure
Strong adsorption ability
Control the odor
Coal based columnar activated carbon for air purification:

Coal based columnar activated carbon is one type of a product which is used for air purification.
It is made of superfine anthracite and wood charcoal.
With its large specific surface area and developed pore structure, this product has strong adsorption ability which can adsorb the pernicious gases in order to control the odor.
Since its different productive technology, it has such advantages: high wear resistance strength, stand high temperature and pressure.
Because of this, it is not easy to be broken and recycled easily. Less powder around made it easy to be washed.
All in all, it can be well used for a long time.

Technical reference
:
Iodine (mg/g): >850
Ash (%): <10
Moisture (%): <5
Intensity (%): >90
Pack density (%): 475
Carbon tetrachloride level (mg/g) : >55
Length (mm): 3-12
Diameter (mm): 1.5-3
Mesh: As per the demand of clients

(Any questions please contact me: cn220014763 trade manager Alibaba.com)
I am looking forward to your early reply!

Ion Exchange Resin D113

D113 is intended for use in hydrogen cycle dealkalization, deionization, and chemical processing applications.

Polymer Matrix Structure
Acrylic Crosslinked with DVB
Physical Form and Appearance
Macroporous spherical beads
Whole Bead Count
95% min.
Functional Groups
R-COOH
Ionic Form ,as shipped
H
Total Exchange Capacity, H+ form, wet, volumetric
4.2 eq/l min
Moisture Retention, H+ form
45-52%
Particle Size Rang
+1.2 mm <5%, -0.3 mm <1%
Swelling Na+→ H+
65% max.
Shipping Weight (approx.)
720-800 g/l
Specific Gravity, moist H+ Form
1.18
PH Range, operating
4 - 14

For more detailed information, pls feel free to contact with us, thanks.

6-12 Granular Activated Carbon

The carbon has desirable mechanical strength, surface area and developed mesopore and micropore , the rate of adsorption is high

This carbon is made from high quality bituminous coal ---- under strictly controlled conditions ---break into small sizes ---- carbonize --- activate --- granulate into necessary particles. The carbon has desirable mechanical strength, surface area and developed mesopore and micropore , the rate of adsorption is high , and the bed resistance is small. Furthermore, the carbon is durable, readily regenerative, and excellent for adsorption of all solutes and free chlorine in water. The carbon is used for the purification, dechlorization, decolorization and deodorization of drinking water and industrial water. The carbon is also suitable for deep purification of domestic sewage and industrial waste water etc.
We can also produce water washed and acid washed activated carbon according to your requirements.
Specification:
Particle size: 8×30,12×40
Moisture: 5% max Hardness: 90% min Iodine number: 700-1100mg/g
Methylene blue: 150-220mg/g Ash: 5-15%
Apparent density: 440-550g/l PH: 5-10

Ion Exchange Resin

001x10 Gel Strong Acid Cation Exchange Resin. High quality, competive price.

Polymer Matrix Structure
Styrene Crosslinked with DVB
Physical Form and
Clear spherical beads
Whole Bead Count
95% min.
Functional Groups
R-SO3¯
Ionic Form ,as shipped
Na
Total Exchange Capacity, Na+ form, wet, volumetric
2.2 eq/l min.
Moisture Retention, Na+ form
40-46%
Particle Size Range
+1.2 mm <5%, -0.3 mm <1%
Swelling Na+→ H+
10% max.
Ca2+→Na+
5% max.
Shipping Weight (approx.)
800-880 g/l
Specific Gravity, moist Na+ Form
1.30
PH Range, Stability
0 - 14

For more detailed information, pls feel free to contact with us, thanks.

Iron (III) Chloride

1. With strong complexation and Bridges
2. acidic adsorption function
3. soluble in water
Iron (III) Chloride

Properties:
(liquid) ferric chloride solution for brown. With strong complexation and Bridges, acidic adsorption function, soluble in water, is a kind of good flocculating agent, usage, coagulation, such as precipitation, main effect in water features.
Quality Standards:
Test Items
Specifications
Appearance
Orange to brown liquid
Content(FeCl
3
)
≥41%
Content(FeCl
2
)
≤0.30%
Insolubles in water
≤0.50%
Free acidity(HCl)
≤0.40%
As
≤0.0002
Cd
≤0.0001
Cr
≤0.0005
Pb
≤0.001
Hg
≤0.000 01

Package:
The ferric chloride (liquid) with Packaging food-grade polyethylene plastic barrel, net weight 280 kg, Or IBCs drum.

Iron Sulphate

Pesticides, fertilizers, feed and pigments, catalysts, cleaning agents
FeSO4.H2O is mineral additive in animal feed.
1.iron sulphate The lowest price and high quality
2.in the stock available Specializing in the production
3.Steady output
1. Ferrous Sulphate
2.used as waste water treatment and
Pesticides, fertilizers, feed and pigments, catalysts, cleaning agents, disinfectants, magnetic materials
3.
Item
Value
Premium grade
First grade
Second
grade
Ferrous sulfate (FeSO4.7H2O) ,%≥
98.0
94.0
90.0
TiO2 , %≤
0.5
0.5
0.75
mWater insoluble matter, %≤
0.2
0.5
0.75

Isocyanuric Acid Powder or Granular or Tablet

The cyanuric Acid (CA) is white crystalline solid powder or granular, non-toxic and odorless.

The cyanuric Acid (CA)
is white crystalline solid powder or granular, non-toxic and odorless. CA is widely used for the stabilization of available chlorine swimming pool water treatment, and also the starting compound for the synthesis of many organic derivatives.
One of its major applications is for the production of Sodium Dichloro isocyanurate Acid and Trichloroisocyanuric Acid.

PROPERTIES:
Molecular Formula: C3H3N3O3
Molecular Weight: 129.1
Cas No:108-80-5 HS NO:2837.1990

Chlorine Stabilizer
Pre-conditions your pool water to make chlorine last longer
Protects chlorine from the sun. Damaging effects
Increases chlorine effectiveness
Powder, Granular or Tablet form.

For more detailed information, pls feel free to contact with us, thanks.

Isocyanuric Acid

The Chlorine Stabilizer (CA) is white crystalline solid powder or granular, non-toxic and odorless.

The Chlorine Stabilizer (CA)
is white crystalline solid powder or granular, non-toxic and odorless. CA is widely used for the stabilization of available chlorine swimming pool water treatment, and also the starting compound for the synthesis of many organic derivatives.
One of its major applications is for the production of Sodium Dichloro isocyanurate Acid and Trichloroisocyanuric Acid.

PROPERTIES:
Molecular Formula: C3H3N3O3
Molecular Weight: 129.1
Cas No:108-80-5 HS NO:2837.1990

Chlorine Stabilizer
Pre-conditions your pool water to make chlorine last longer
Protects chlorine from the sun. Damaging effects
Increases chlorine effectiveness
Powder, Granular or Tablet form.

For more detailed information, pls feel free to contact with us, thanks.

Isocyanuric Acid

Cyanuric Acid is white crystalline solid powder or granular, non-toxic and odorless.

The
Cyanuric Acid is white crystalline solid powder or granular, non-toxic and odorless. CA is widely used for the stabilization of available chlorine swimming pool water treatment, and also the starting compound for the synthesis of many organic derivatives.
One of its major applications is for the production of Sodium Dichloro isocyanurate Acid and Trichloroisocyanuric Acid.

PROPERTIES:
Molecular Formula: C3H3N3O3
Molecular Weight: 129.1
Cas No:108-80-5 HS NO:2837.1990

Chlorine Stabilizer
Pre-conditions your pool water to make chlorine last longer
Protects chlorine from the sun. Damaging effects
Increases chlorine effectiveness
Powder, Granular or Tablet form.

For more detailed information, pls feel free to contact with us, thanks.

Isopentane

We are manufacturer of organic chemicals such as normal hexane,heptane,pentane, acetonitrile ,cyclohexane,extraction solvent oil
iso Pentane
pentane:>=95%
pentane & Isopentane:>=99%
Light Component:<=0.5%
Heavier Component:<=0.5%
Water: <=30 PPM
Sulphur<=5 PPM
Benzene:<=0.01%

Isothiazolinone (CMIT/MIT)

Strong inhibition
biocidal effects on:
ordinary bacteria, fungi and alga
Application Fields
Building Materials, Personal Care & Cosmetics, Paints & Marine Coatings, Plastics, Metal Working Fluid, Wood Preservation, Oilfield, Pulping, Paper, Water Treatment

Function Characteristic:
Isothiazolinones is a liquid biocide which is composed of 5-chloro-2-methyl-4-thiazoline-3-ketone (CMIT) and 2-methyl-4-thiazoline-3-ketone (MIT). The bactericidal effect of Isothiazolinones is carried out through breaking the bond between bacteria and algae protein. When contacted with microbes, Isothiazolinones can quickly inhibit their growth, thus leading to death of these microbes.

It has been used as a preservative in a variety of industrial applications, which include water treatment, paper and pulping, cooling tower, waster water, wash water, water based coatings such as paints, slurries, dispersed pigments, adhesives, latex emulsion.

The active ingredient provides broad-spectrum activity against common bacteria, algae, and fungi. CMIT/MIT 14 is approved by EPA for industrial applications. It is highly recommended for water containing systems with PH 2-9. It also can be used to formulate many different concentrations of CMIT/MIT.

Usage
:
Typical use concentrations are in the range of Grade I: 0.02-0.3 %( w/w) and Grade II: 0.1-0.6 %(w/w) in the final products. It should be noticed that a good manufacturing practices should be applied and equipment, pipes, and storage tanks should be sanitized by CMIT/MIT 14 regularly.

Attention:
Use of personal protective equipment such as chemical impervious gloves for hands, safety goggles and shields for eye are strongly advised. If the produce comes in contact with the skin, wash immediately with plenty of water. In case of eye contact, rinse immediately with plenty of water and seek medical attention. The product should be stored at room temperature.

Packing and storage:
Normally in 20kg,25kg and 200kg net Plastic Drum. Put in ventilated and avoid sunlight. The shelf life is 12 months (20 degree).

Isothiazolinone Cmit/mit 14% Boicide

CIT/MIT is wide used for industrial cooling water, filling-water of oil field and lines of papermaking, coating, paint and so on

Chemical name
5-Chloro-2-methyl-4-isothiazolin-3-one(CIT)2-methyl-4-isothiazolin-3-one(MIT)
Percent Active
14.0 %
Appearance
light yellow liquid
PH
2-4
Stability
Stable for 1 year

Applications:
HD-CIT/MIT is wide used for industrial cooling water, filling-water of oil field and lines of papermaking, coating, paint, latex and so on.
Description:
The character of HD-CIT/MIT is as following:
Broad-spectrum disinfectant function: It effectively disinfects algae bacteria and fungi.
No environmental pollution: After it is diluted to use concentration , it is easily degraded to non poisonous and non pollutant materials by microorganism.
Good solubility in water: It has good compatibility in various formulation and is suitable for wide-ranging of PH value.
Standard paching:

25and250kg plastic containers.
This product matches the Chinese petroleum chemical engineering head office and a water of the electric power industry processings to use an examination standard

Isothiazolinone

Isothiazolinones is a kind of fungicidal with properties of broad spectrum, high efficiency, low toxicity and non-oxidative,
Isothiazolinone
CAS:
26172-55-4, 2682-20-4
Molecular weight:
115.16
Structural Formula:
2-methyl-4-thiazoline-3-ketone 5-chloro- methyl-4-thiazoline-3-keton
Properties:
Isothiazolinones is composed of 5-chloro-2-methyl-4-thiazoline-3-ketone (CMI) and 2-methyl-4-thiazoline-3-ketone (MI). The bactericidal effect of Isothiazolinones is carried out through breaking the bond between bacteria and algae protein. When contacted with microbes, Isothiazolinones can quickly inhibit their growth, thus leading to death of these microbes. Isothiazolinones has strong inhibition and biocidal effects on ordinary bacteria, fungi and alga, and has many advantages such as high biocidal efficiency, good degradation, no residual, safety in operation, good compatibleness, good stabilization, low cost in operation.
Isothiazolinones can mix with chlorine and most cation, anion, and non-ionic surfactants. When used at high dosage, its biosludge stripping effect is excellent.
Isothiazolinones is a kind of fungicidal with properties of broad spectrum, high efficiency, low toxicity and non-oxidative, it is the ideal biocidal in industrial circulating cool water system and in wastewater treatment in oilfield, papermaking, pesticide, cutting oil, leather, detergent and cosmetics etc..
Specification:
Notes: 2%, 4% and 8% or any concentration can be supplied on demands.
items
index
Grade I
Grade II
Appearance
Amber transparent liquid
Light yellow or light green transparent liquid
Active content %
14.0 min
1.50 min
pH value(as it)
1.0-4.0
2.0-5.0
Density (20)g/cm
3
1.25 min
1.02 min
CMI/MI (wt %)
2.5-4.0
2.5-4.0
Usage:
When used as sludge stripper for grade II, the dosage of 150-300mg/L is preferred, when used as boicide, the dosage of 80-100mg/L is preferred, and charges every 3-7 days. No used together with oxidative fungicidal such as chlorine, and no used in cooling water system containing sulfur. When used together with quaternary amine, the effect will be better. When used as industrial fungicide, the dosage of 0.05-0.4% is preferred.
Package and Storage:
25kg in plastic barrel, or confirmed by clients. Storage for ten months in room shady and dry place.
Safety Protection:
Corrosive, Avoid contact with eye and skin, Wear splash resistant safety goggles and rubber glores.once contacted, flush with water.

60% SDIC Granular/Tablets

60% 56%SDIC Granular/Tablets
High effective chlorine content;
Good stability.
Less water-insoluble matters.
water treatment
Sodium Dichloroisocyanurate (SDIC
) 60% 56%

Molecular Formula: C
3
N
3
O
3
Cl
2
Na
M.W.:219.98
CAS:2893-78-9

Character:
White powder\graininess and tablets. Have chlorine taste, Soluble in water, the active chlorine fall slightly if long-term storage of dry product, Is a stable performance of strong oxidizer and chlorinated agent.

Effective content of chlorine:
60%
56%
Content of water:
3% max
7% max
PH value of 1% solution:
5.5-7.0
Substance insoluble in wate:
less than 0.1%

Style
:
Powder, Granule, Tablet

Granules
: 8-30mesh,20-40mesh, 20-60mesh
Tablet
:1g, 5g, 10g, 15g, 20g, 30g, 50g, 100g, 125g, 150g, 190g, 200g, 250g, 500g

Packing :

25kg woven plastic bag lined with double plastic bags.
One-ton plastic bag
50kg plastic drums
50kg fiber drum
or packing according to buyers demand.

Application
1. This product can be used in water treatment, swimming pool water treatment, drink water treatment and algae removing of industrial circulating water.
2. It can be used in dishware disinfection, preventative disinfection of houses, hotels and public places, hygiene and disease control in hospitals, and environment disinfection in fish, silkworm, livestock and poultry feeding places.
3. Moreover, it can also be used in textile cleansing and bleaching, wool shrink resistance, paper insect resistance, and rubber chlorination, etc.

Storage &transportation:

stored in cool, dry place, and keeping away from sunlight. No contacting with nitride and reductive matter. It can be carried by trains, trucks or ships. .